Samsung VCDC08, VCDC15, VCDC20, VCDC12 User Manual

Vacuum Cleaner

user manual

Before operating this unit, please read the instructions carefully.

✻

For indoor use only.

✻

VCDC08**
VCDC12**
VCDC15**
VCDC20**

English

imagine the possibilities

Thank you for purchasing a Samsung product.

safety information

Eco Hard Floor

SAFETY INFORMATION

• Before operating the appliance, please read this manual thoroughly and

WARNING

WARNING

CAUTION/WARNING SYMBOLS USED

retain it for your reference.

• Because these following operating instructions cover various models,

the characteristics of your vacuum cleaner may differ slightly from those
described in this manual.

WARNING

CAUTION

Indicates that a danger of death or serious injury exists.

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

Represents something you must NOT do.

Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

Notes on the energy label

• Declared energy effi ciency and cleaning performance class on
carpet can be met with the enclosed 2-Step Brush.

• When the hard fl oor has joints and gaps, please use the
enclosed "Eco Hard Floor" brush which is designed to meet
the energy effi ciency and cleaning performance class on hard
fl oor with joints and gaps.

• The values provided on the energy label have been
determinded according to the prescribed measuring process
(in accordance with EN60312 - 1).

02_ safety information

Eco Hard Floor

safety information

IMPORTANT SAFEGUARDS

1. Read all instructions carefully. Before switching on, make

sure that the voltage of your electricity supply is the same
as that indicated on the rating plate on the bottom of the
cleaner.

2. WARNING : Do not use the vacuum cleaner when rug or

floor is wet.
Do not use to suck up water.

3. Do not use the vacuum cleaner without a dust bin.

Empty the dust bin before it is full in order to maintain the
best efficiency.

4. Slide to the Stop(or Min)position before inserting a plug

into the electrical outlet.

5. Do not use the vacuum cleaner to pick up matches, live

ashes or cigarette butts.

Keep the vacuum cleaner away from stoves and other

heat sources. Heat can deform and discolour the plastic
parts of the unit.

6. Avoid picking up hard, sharp objects with the vacuum

cleaner as they may damage the cleaner parts. Do not
stand on the hose assembly. Do not put weight on the
hose.
Do not block the suction or the exhaust port.

7. Switch the vacuum cleaner off on the body of the

safety information _03

machine before unplugging from the electrical outlet.
Disconnect the plug from the electrical outlet before
changing the dust bag or dust container. To avoid
damage, please remove the plug by grasping the plug
itself, not by pulling on the cord.

8. This appliance can be used by children aged from 8

years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved.

9. Children shall not play with the appliance. Cleaning and

user maintenance shall not be made by children without
supervision.

10. The plug must be removed from the socket outlet before

cleaning or maintaining the appliance.

11. The use of an extension cord is not recommended.

12. If your vacuum cleaner is not operating correctly, switch

off the power supply and consult an authorized service
agent.

13. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.

14. Don’t carry the vacuum cleaner by holding the hose.

Use the handle on the vacuum cleaner set.

15. Unplug the cleaner when not in use. Turn off the power

switch before unplugging.

04_ safety information

contents

ASSEMBLING THE CLEANER

06

OPERATING THE CLEANER

07

MAINTAIN TOOLS AND FILTER

09

TROUBLESHOOTING

17

07 ON/OFF Switch
07 Power Cord
08 Power-Control

09 Using accessory
10 Maintain floor tools
13 Emptying the dust bin
14 When to clean the dust pack
15 Cleaning the dust pack
16 Cleaning the outlet filter
16 Change the battery (option)

contents _05

assembling the cleaner

OPTION

OPTION

• Features may vary according to model.

• Please do not press the button

of dust bin handle when carrying
machine.

• For storage, park the floor nozzle.

06_ assembling

operating the cleaner

ON/OFF SWITCH

1) BODY CONTROL TYPE 2) HANDLE CONTROL TYPE

• When removing the plug from the electrical outlet, grasp

CAUTION

POWER CORD

the plug, not the cord.

02 OPERATING

operating _07

POWER-CONTROL

sender

BODY-CONTROL TYPE / ON/OFF TYPE

• HOSE

To reduce suction for cleaning draperies,
small rugs, and other light fabrics, pull
the tap air until the hole is open.

• BODY (BODY-CONTROL TYPE ONLY)

MIN = For delicate surface e.g. net

curtains.
MAX = For hard floors and heavily soiled
carpets.

HANDLE CONTROL TYPE

• HOSE

Vacuum cleaner MODE (MIN/MID,MAX)

Press the MODE button repeatedly
to select the correct mode.
(ON) MIN → MID → MAX

sender

Handle Control

The cleaner is controlled by

using infrared signals.

08_ operating

maintain tools and filter

USING ACCESSORY

Pipe (Option)

• Adjust the length of the telescopic pipe by

sliding the length control button located in the
center of the telescopic pipe back and forth.

• To check for blockages, separate the

telescopic pipe and adjust to shorten. This
allows for easier removal of waste clogging the
tube.

Accessory

• Dusting brush for furniture. shelves, books,

etc.

• Crevice tool for radiators, crevices, corners,

between cushions.

03 MAINTAIN

maintain _09

maintain tools and filter

Carpet Cleaning

Floor Cleaning

MAINTAIN FLOOR TOOLS

2-Step Brush (Option)

• Adjust the inlet lever according to the floor

surface.

• Remove waste matter

completely if the inlet is
blocked.

Carpet Cleaning

Floor Cleaning

Power Pet Plus Brush (Option)

1 2

For improved
pickup of pet
hair and fibre on
carpets.

Frequent vacuuming of hair or pet fur may cause a reduction in rotation due to matters
tangled around the brush-roller. In this case, clean the brush-roller with care.

1. Push the Open button of the transparent screen cover to separate the cover.

2. Remove the brushbar from the transparent screen.

3. Remove waste matter such as dust and hair tangled around the brushbar using
scissors.

4. Remove dust inside the brush housing using a dry duster or crevice tool.

5. Insert brushbar into rotating belt and assemble.

6. Click the transparent screen cover back into place to reassemble.

10_ maintain

4 5

3

6

Pet Brush (Option)

Turbine

Brush

For improved pick-up of pet hair and fibre on carpets.
Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to
matters tangled around the drum. In this case, clean the drum with care.

Blanket brush (Option)

Clogs on turbine keep brush from turning, thus need to be unclogged
as follows. For picking up pet hair and fibre on upholstery and bed
linen.

Remove waste matter completely when inlet is blocked.

03 MAINTAIN

Turn the lock button to ‘UNLOCK’, and remove waste
matter.

To reassemble, align the cover to the front of the main
body and close. After closing the cover, ensure that the
lock button is turned to the ‘LOCK’ position.

Use for bedclothes only. Be cautious not to damage brush during
unclogging.

WARNING

Turbine

Brush

maintain _11

maintain tools and filter

Mini turbo brush (Option)

- To replace brush-roller

1. If a clog is present or debris is visible, unscrew the two
screws on the back of the Mini turbo brush to remove
the faceplate and clear any obstructions.

2. Inspect condition of brush-roller.
Replace brush-roller if brushes are worn down.
To remove brush-roller, pull up and out of end slots in
nozzle housing.
Insert ends of brush-roller into same slots to replace.

Inspect belt to ensure that it is in good condition.
If belt is broken or cracked, replace belt according to

To Replace Belt instructions.

3. Using at MAX.
Press the MAX button to operate the vacuum at
maximum intake.

- To replace belt

1. Remove bottom plate.
See figure in To Replace brush-roller instructions.

2. Loop one end of new belt around shaft of pulley.

3. Loop other end of belt around designated area for
it on brushroll. Insert brush-roller into slots in nozzle
housing.
See figure in To Replace brush-roller instructions.

4. Fit Mini turbo brush back together as described in To
Replace brush-roller instructions.

12_ maintain

EMPTYING THE DUST BIN

click

03 MAINTAIN

1. Once dust reaches the

dust full mark, or sution
is noticeably reduced
during cleaning, empty
the dust bin.

4. Throw away dust into

the bin.

- Empty into a plastic bag

(recommended for asthma/
allergy sufferers)

2. Take the dust bin out

by pressing the button.

5. Close the dust bin

cover.

You may rinse the dust bin with cold water.

3. Separate the dust bin

cover.

click

6. Before use, push the

dust bin into the main
body of the vacuum
cleaner until you hear
the “click” sound.

maintain _13

maintain tools and filter

HANDLE CONTROL TYPE

BODY CONTROL TYPE

WHEN TO CLEAN THE DUST PACK

- If suction is noticeably reduced during cleaning, please check the dust pack as

indicated below.

Turn the
vacuum power
to ‘MAX’.

HANDLE CONTROL TYPE

If suction is noticeably reduced with the inlet floating 10cm
above flat floor, clean it.

When suction is noticeably reduced continuously, please cleaning the Dust Pack as
shown in the following illustration.

14_ maintain

BODY CONTROL TYPE

CLEANING THE DUST PACK

1. Remove the dust bin and dust pack as

shown.

2. Remove the sponge and filter from the dust pack.

3. Wash the sponge and the filter of the dust pack with

water.

4. Let the sponge and filter dry in the shade for more

than 12 hours.

5. Put the sponge and filter into the dust pack.

03 MAINTAIN

6. Put the assembled dust pack into the main

body.

Make sure the filter is completely dry
before putting it back into the vacuum
cleaner. Allow 12 hours for it to dry.

maintain _15

maintain tools and filter

BATTERY TYPE : AA

Size

CLEANING THE OUTLET FILTER

OPTION - MICRO FILTER

Press the fixed frame part at
the back of the main body to
remove.

Replacement filters are available at your local
Samsung distributor.

Remove and replace the blocked
outlet filter.

CHANGE THE BATTERY (OPTION)

1. When the vacuum cleaner dows not work, replace

the batteries. If the problem persists, please contact
our authorized dealer.

2. Use 2 batteries of size AA.

1. Never disassemble or recharge the batteries.

2. Never heat up the batteries or throw them into fire.

WARNING

3. Do not reverse (+), (-) poles

4. Dispose of the batteries property.

16_ maintain

OPTION

BATTERY TYPE : AA

Size

troubleshooting

PROBLEM SOLUTION

Motor dows not start.

Suction force is gradually
decreasing.

Cord does not rewind fully.

Vacuum cleaner dows not pick
up dirt.

Low or decreasing suction

Body overheating

Static electicity discharge • Please decrease power suction.

This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC

• Check cable, pulg and socket.

• Leave to cool.

• Check for blockage and remove.

• Pull the cord out 2-3m and push down the cord

rewind button.

• Check hose and replace if required.

• Please check filter and, if required, clean as

illustrated in the instructions. if filters are out of
condition change them to new ones.

• Please check filters, If required clean as

illustrated in the instruction.

04 TROUBLESHOOTING

troubleshooting _17

product fiche

[English]

According to Commission Regulation (EU) No 665/2013 and No 666/2013

A Supplier Samsung Electronics., Co. Ltd

B Model

C Energy Efficiency Class B E

Annual Energy

D

Consumption (kWh/yr)

Carpet Cleaning

E

Performance Class

Hardfloor Cleaning

F

Performance Class

G Dust Re-Emission Class C C

H Sound Power Level (dBA) 77 82

I Rated Input Power (W) 750 1300

J Type General purpose vacuum cleaner

1) Indicative annual energy consumption (kWh per year), based on 50 cleaning tasks.
Actual annual energy consumption will depend on how the appliance is used.

2) Measurements for power consumption and performance are based on methods in
EN 60312-1 and EN 60704.

VCDC08RH VCDC08SH VCDC15RH VCDC15SH VCDC15QV

34.0 52.0

ED

AD

memo

If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.

COUNTRY CALL OR VISIT US ONLINE AT

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

SOUTH AFRICA 0860 7267864(SAMSUNG) www.samsung.com/za

DJ68-00665A-07