Samsung VC-6714H User Manual [hu]

Operating Instructions

V ACUUM CLEANER

❈ Before operating this unit, please read the instructions carefully

DJ68-40145X(ENGLISH) 2001.5.9 5:14 PM ˘`1

Features include automatic cord rewind and dust indicator. Remote power control option available.

NOTE :

1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner.

2. WARNING:Do not use the vacuum cleaner when rug or floor is wet.

3. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time. Use the vacuum cleaner only for its intended use as described in the instructions.

4. Do not use the vacuum cleaner without a dust bag. Change the dust bag before it is full in order to maintain best efficiency.

5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit.

6. Avoid picking up hard, sharp object swith the vacuum cleaner as they may damage the cleaner parts. Do not stand on the hose assembly. Do not put a weight on the hose. Do not block the suction or the exhaustion part.

7. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp the plug to disconnect from power outlet to avoid damage to cord, plug, prongs or socket. Always disconnect cord from electrical outlet before changing the dust bag.

8. The use of an extension cord is not recommended.

9. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent.

10. Do not attempt to replace a damaged power supply cord. Only the manufacturer or

qualified service personnel can replace power cords. Serious injury may result.

1. Do not use to suck up water.

2. Do not immerse in water for cleaning.

3. The hose should be checked regularly and must not be used if damaged.

FEA TURES

IMPORT ANT SAFEGUARDS

Warning

DJ68-40145X(ENGLISH) 2001.5.9 5:14 PM ˘`2

IDENTIFICA TIONS OF PARTS

REMOTE POWER CONTROL

❊

(REMOTE CONTROL MODEL ONLY)

SUCTION REGULATOR

❊

EXTENSION

TUBES

HOSE

DUST INDICATOR

CARRYING HANDLE

DUST COVER

HOSE CLAMP

FLOOR NOZZLE

❊

RUG/FLOOR

SELECTOR

CORD REWIND BUTTON

ON/OFF SWITCH

ACCESSORY HANGER

CREVICE-TOOL

▼

Features marked * may vary according to model.

DJ68-40145X(ENGLISH) 2001.5.9 5:14 PM ˘`3

ASSEMBLING THE V ACUUM-CLEANER SO THA T IT IS READY FOR USE

USAGE OF FLOOR NOZZLE

1. Slide the free end of the extension wand into the nozzle tube.

2. Slide the narrow end of one extension wand into the other extension wand.

3. Slide the extension wand into the handle end of the hose.

4. Slide the hose clamp into the suction inlet of the unit.

Select the carpet indicator ①when cleaning carpets. Select flat surface indicator

➁when cleaning the floors, tiles, etc.

For optimum efficiency, clean floor brush with crevice tool.

FOR UNIVERSAL BRUSH

Use the floor nozzle for all cleaning surfaces.

NOTE :

FOR RUG / FLOOR SELECTOR

Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned.

DJ68-40145X(ENGLISH) 2001.5.9 5:14 PM ˘`4

SUCTION POWER CONTROL (REMOTE CONTROL MODEL ONLY)

DUST INDICA T OR

DUST BAG REMOV AL(DUST COVER)

LOCKER

You may continue cleaning until the dust indicator changes and displays a red colour. This means the dust bag is full and needs to be replaced. If the indicator suddenly displays red and the cleaner loses suction power while in use, turn your cleaner off and check whether the hose, pipe or nozzle is clogged. When you check bag status by indicator, set motor power on maximum position.

Your cleaner has variable electronic suction control to give you greater versatility. Select the most suitable position according to cleaning needs. The suction capacity can be regulated steplessly by moving the slide to the desired position

SLIDE THE PART “A” IN THE STOP POSITION

Vacuum cleaner switches off (stand by mode)

SLIDE THE PART “A” TOWARDS MAX

Suction capacity increases steplessly up to

MAX.

NOTE : Hose must be disconnected NOTE : before changing bag. NOTE : Replace the dust bag as soon NOTE : as it is full.

1. To open the dust cover of the dust bag compartment, lift the cover upward.

2. Remove the dust bag from the cleaner.

3. Dispose of the full bag. Insert the cardboard bag collar of the dust bag as far as it can go on the suction inlet along the slide guide. Press down the locker. Position the dust bag so that no part of the bag is pinched.

4. Press the front of dust cover down lightly until it re-locks.

NOTE :

DJ68-40145X(ENGLISH) 2001.5.9 5:14 PM ˘`5

+ 11 hidden pages