1
Unpack
Taking the TV Out of the Box
• Warning:
Do not touch the TV’s screen when
you take it out of the box. Hold it
by its edges only. If you touch the
screen, you can cause the TV panel
to crack.
• Recommendation:
Two people should remove the
TV from the box as shown above.
When removing the TV, hold it by
its edges only. Do not touch the
screen.
Included in this Box
Remote Control
MIC
TV
KEYPAD
SEARCH
SOURCE
CH
VOL
VOICE
GUIDE
RETURN
CH.LIST
EXIT
SMART HUB
3D CC P.SIZEMTS
INFO
MENU
Samsung Smart
Control
Batteries
(2 AA, 2 AAA)
[HU8500-8550-QSG]BN68-06002E-01ENG.indb 1 2014-09-30 2:28:44
Remote Control
Cables and Also included
Power Cord IR Extender Cable
• User manual
• Regulatory guide
• 3D Active Glasses
2
Installing the TV
1 Remove the top part of the box that
is encasing the TV.
3 Remove the protective styrofoam at the bottom corners of the TV.
[HU8500-8550-QSG]BN68-06002E-01ENG.indb 2 2014-09-30 2:28:46
2 Fold down the sides of the box at
the bottom as shown in the picture.
4 Ensure at least two people move the TV to the spot to install it.
Make sure to hold the TV by the frame and do not touch the panel.
✎
[HU8500-8550-QSG]BN68-06002E-01ENG.indb 3 2014-09-30 2:28:47
3
Connect
* Recommended Connections
Connection panel on
the back of the TV
TV signal
Connect your
coaxial cable to the
Antenna In port.
After you have connected all
your external devices, plug the
TV’s power cord into the back
of the TV. DO NOT plug it into
a wall outlet until you have
reached Section 7, Initial Setup.
Cable/Satellite/DVR
Connect your Cable box or digital
video recorder with an HDMI cable.
Internet
Connect here with an Ethernet
cable or wirelessly later during
the Initial Setup.
[HU8500-8550-QSG]BN68-06002E-01ENG.indb 4 2014-09-30 2:28:48