Samsung UN40EH5000F, UN32EH4000F, UN26EH4000F User Manual

LED TV
user manual
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
✎ See the war ranty c ard for more infor mation on warra nty ter ms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations of the original
Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free: –– In the United States : 1-800-SAMSUNG (1-800-726-7864) –– In Canada : 1-800-SAMSUNG
BN68-03956A-02
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.
Always try to display any image on full screen, use TV set picture format menu for
best possible match.
Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎ W hen usin g a stand o r wall-mo unt, use pa rts prov ided by Sa msung
Electro nics on ly.
x If you use part s provide d by anothe r manuf acturer, it may r esult in a
proble m with the p roduct o r an injur y due to the product fa lling.
✎ T he appe arance m ay diff er depe nding on t he produ ct. ✎ B e carefu l when you c ontact t he TV be cause so me par ts can be so mewhat
hot.
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
4inches
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country CANADA U.S.A
Samsung Electronics Canada Inc., Customer
Address
Customer Care Center
Web Site
Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
1-800-SAMSUNG(726-7864)
www.samsung.com
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
4inches
4inches
Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112
4inches
Getting Started
Accessories
• Remote Control (AA59-00600A) & Batteries (AAA x 2)
• Warranty Card / Safety Guide
Input Cables (Sold Separately)
• RS232 (AA39-00311A)
• Audio
• HDMI
• HDMI-DVI
✎ Check the cable before plug-in
Cable Ports
HDMI
USB
Optical
Do not plug cable upside down. Be sure to check before plug-in.
TV Controller (Panel Key)
Power on Turns the TV on by pressing the controller in standby mode.
Adjusting the volume
Selecting a channel
Using the function menu
Selecting the Media Play
Selecting the MENU ()
Selecting the Source List (s)
Power Off ()
Adjusts the volume by moving the controller from side to side when the power is on.
Selects a channel by moving the controller up and down when the power is on.
Press the controller when the power is on, then the function menu screen appears. If you press it again, the function menu screen disappears.
Selects the MEDIA.P by moving the controller in the function menu screen. The Media Play main screen appears.
Selects the MENU() by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears.
Selects the Source List(s) by moving the controller in the function menu screen. The Source List screen appears.
Selects the Power Off () to turn the TV off by moving the controller in the function menu screen.
✎ E xits th e menu wh en pres sing the control ler mor e than 1 se cond.
• Owner’s Instructions
• Power Cord
• Wire Holder Stand (BN61-05491A)
• Component
• Composite (AV)
• Coaxial (RF)
Function menu
MEDIA.P
m R
P
Return
TV Controller
Remote control sensor
✎ W hen sel ecting the func tion by mov ing the c ontroller to the up /down/l eft/
right directi ons, be su re not to pre ss the controlle r. If you press i t first, you cannot operate i t to move the up/down/l eft/right di rections.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the Input source is set to TV.
✎ Connecting the power cord and antenna. (refer to
‘Connections’)
Selecting a language
Select Language of the OSD.
Language
 U
Plug & Play
English
Español
Français
Move EEnter
Select the desired OSD (On Screen Display) language.
Selecting a Home Use mode
• Select the Home Use mode. Store Demo mode is for retail environments.
• When pressing TV controller, the function menu screen appears. Select
the MENU(m) and press it more than 5 seconds using the controller. The Store Demo mode is set. Cancel the Store
Demo by selecting Source List(s) and pressing it more than 5 seconds.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the , , or button.
Start
Set the Clock Mode automatically or manually.
• If you select the Auto, set the DST(Daylight Saving Time).
• On the DST screen, press ENTER, then select whether to turn DST (Daylight Savings Time) on or off. Select the time zone where you live.
Enjoy your TV.
Store Demo
Plug & Play
Home Use
Move EEnter
Select ‘Home Use’ when installing this TV in your home.
 L
Selecting an antenna
Select the Antenna source to memorize.
 U
Plug & Play
Air Start
Cable
Auto Start
Move EEnter Skip
Setting the Clock Mode
Set the Clock Mode.
Clock Mode : Auto
 E
Plug & Play
 
Enter m Skip
Viewing the HD Connection Guide
The connection method for the best HD screen quality is displayed.
Press the ENTER button.
- 2 -- 1 -
Connections
y For better picture and audio quality, connect to a digital device using an HDMI cable.
y The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
y Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
AV Device (1)
Using a HDMI Cable (up to 1080p)
HDMI OUT
Blu-ray player / DVD / cable box / sat box
DVI OUT
HDMI OUT
PC
PC
Using a HDMI (to DVI) Cable
Media Play
Using a USB Drive
TV Side Panel
R W RY
W YR
AV Device (2)
Using an Audio/Video
AUDIO OUT
VIDEO OUT OPTICAL
R-AUDIO-L
VCR Blu-ray player
R W R B RG
W R BR
AV Device (3)
Using a Component Cable
(up to 1080p)
AUDIO OUT
R-AUDIO-L
Changing the Input Source
Source List
Use to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver.
1. Press the SOURCE button.
2. Select a desired external input source.
TV / AV / Component / HDMI1/DVI / HDMI2
✎ You can only choose exter nal devices that are connected to the
TV. In the Source List, connected inputs will be highlighted.
How to use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button in Source List. The following selections appear under Edit Name:
y For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
y Connecting through the HDMI cable may not be supported depending on the PC.
y If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.
y EX-LINK: Connector for service only.
y The side panel may differ depending on the model.
Power Input
TV Rear Panel
RG
Using an Optical (Digital) Cable
COMPONENT OUT
PR PB Y
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Audio Device (1)
Using an Audio (Analog) Cable
R W
or
Audio Device (2)
Digital Audio System
AUDIO IN
R-AUDIO-L
DVD / Home Theater
VHF/UHF Antenna
ANT OUT
Cable
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
✎ When connecting a PC to the HDMI IN 1(DVI) por t with HDMI
cable, you should set the TV to PC mode under Edit Name.
✎ When connecting a PC to the HDMI IN 1(DVI) por t with HDMI
to DVI cable, you should set the T V to DVI PC mode under Edit Name.
✎ When connecting an AV devices to the HDMI IN 1(DVI) por t
with HDMI to DVI cable, you should set the T V to DVI mode
under Edit Name.
Information
You can see detailed information about the connected external device.
- 3 -
Remote Control
✎ T his remo te contro l has Bra ille poi nts on the Po wer, Channe l, and Volume butto ns and ca n be used b y visua lly impa ired pe rsons.
Displays and selects the available video
Turns the TV on and off.
Press to directly access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example,
to select channel ‘54-3’, press ‘54’, then press
Displays the channel list on the screen.
Views the Media Play.
Quickly select frequently used functions.
Selects the on-screen menu items and changes the
MTS: Press to choose stereo, mono or Separate Audio
P.SIZE: Lets you choose the picture size.
values seen on the menu.
Returns to the previous menu.
Program (SAP broadcast).
CC: Controls the caption decoder.
‘-’ and ‘3’.
Adjusts the volume.
Display Modes (HDMI/DVI Input)
Optimal resolution 4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz
Mode Resolution
IBM
MAC
VESA DMT
Horizontal
Frequency (KHz)
640 x 350 31.469 70.086 25.175 +/-
720 x 400 31.469 70.087 28.322 -/+
640 x 480 35.000 66.667 30.240 -/-
832 x 624 49.726 74.551 57.284 -/-
1152 x 870 68.681 75.062 100.000 -/-
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+
1024 x 768 48.363 60.004 65.000 -/-
1024 x 768 56.476 70.069 75.000 -/-
1024 x 768 60.023 75.029 78.750 +/+
1152 x 864 67.500 75.000 108.000 +/+
1280 x 720 45.000 60.000 74.250 +/+
1280 x 800 49.702 59.810 83.500 -/+
1280 x 1024 63.981 60.020 108.000 +/+
1280 x 1024 79.976 75.025 135.000 +/+
1366 x 768 47.712 59.790 85.500 +/+
1440 x 900 55.935 59.887 106.500 -/+
1600 x 900RB 60.000 60.000 108.000 +/+
1680 x 1050 65.290 59.954 146.250 -/+
1920 x 1080 67.500 60.000 148.500 +/+
Vertical
Frequency (Hz)
Pixel Clock Frequency
(MHz)
Sync
Polarity
(H / V)
1366 x 768 1920 x 1080
MEDIA.P SLEEP
     
                 
 
 
Installing batteries (Battery size: AAA)
NOTE
x Use the remote control within 23 feet f rom TV. x Bright light may affe ct the pe rformance of the remote control.
Avoid use when nea rby fluorescent lights or neon s igns.
x The Color and shape may vary depend ing on the model.
- 4 -
sources.
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays the main on-screen menu.
Automatically shuts off the TV at a preset time.
Displays information on the TV screen.
Exit the menu.
Use these buttons according to the direction on screen.
Use these buttons in a specific feature.
Channel Menu
❑ Seeing Channels
Channel List
Add, delete or set Favorite channels and use the program guide for digital broadcasts. Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the / buttons, and pressing the ENTER button. Then you can watch the selected channel.
6 Air
Added Channels
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air 9 Air 9-1 ♥ TV #9 10 Air 10-1 ♥ TV #10
Air ' Zoom ' Select Tools ► Next Program
Channel Status Display icons
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Auto Program
11-1 ♥ TV #11
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
■ 
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved programs.
✎ Using the remote control buttons with the Channel List
x Green (Zoom): Enlarge s or shri nks a channel number. x Yellow (Select): Selects multiple channel lists. Select desired
channels and press the Yellow button to set all the selecte d channels at the same time. The  mark ap pears to the left of the sele cted channels.
x
(Tools): Displays the Channe l List option men u. (The
Options menus may differ depe nding on the situation.)
Icons Operations
A channel selected.
A channel set as a Favorite.
A reserved program.
A program currently being broadcast.
❑ Memorizing channels
✎ When selecting the Cable T V system: Selects the cable
system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.
✎ Af ter all the available channels are stored, it starts to
remove scrambled channels. The Auto program menu then reappears.
✎ Press the ENTER
Auto Program.
button to stop the channel store during
How to Stop Auto Programming
1. Press the ENTER button.
2. A message will ask Stop Auto Program? Select Yes by
pressing the or button.
3. Press the ENTER button.
❑ Other Features
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
✎ Press the ENTER
Channel.
✎ This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.
Add / Delete: Delete or add a channel to display the channels you want.
✎ All deleted channels will be shown on the All Channels
menu.
✎ A gray-colored channel indicates the channel has been
deleted.
✎ The Add menu only appears for deleted channels. ✎ Delete a channel from the Adde d Channels or Favorite
menu in the same manner.
Add to Favorite / Delete from Favorite
you watch frequently as Favorites.
Timer Viewing: You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time first to use this function.
✎ Only memorized channels can be reserved. ✎ Re served programs will be displayed in the Programmed
menu.
✎ When a digital channel is selected, press the (Next
Program) button to view the digital program. If you select the ENTER(Schedule) button on the nex t program, you can set Timer Viewing directly.
Channel Name Edit (analog channels only): Assign your own channel name.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
✎ You can only sele ct Deselect A ll when one or more
channels are selected.
Auto Program: Scans for a channel automatically and stores in the TV
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved to watch.
Change Info: Change a show you have reserved to watch.
Cancel Schedules: Cancel a show you have reserved to watch.
Information: Display a show you have reserved to watch. (You can also change the reservation Information.)
Select All / Deselect All: You can select or deselect all channels in the channel list.
button to stop the Clea r Scra mbled
: Set channels
Channel Mode
Change the channel mode directly between Added Channels and Favorite Channels.
The Favorite Channels is enabled only when you set Add to
Favorite.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
✎ Fine tuned channe ls that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the channel banne r.
✎ To reset the fine-tuning, select Reset.
Picture Menu
Mode
Select your preferred picture type.
✎ When connecting a PC, you can only select Entertain and
Standard.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
✎ Only available when connecting a PC.
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
✎ When connecting a PC, you can only make changes to
Backlight, Contrast, Brightness and Sharpness
Advanced Settings
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a more precise picture.
✎ When connecting a PC, you can only make changes to Gamma
and White Balance.
Color Space (Auto / Native): Adjusts the range of colors available to create the image.
White Balance: Adjusts the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
Gamma: Adjusts the primary color intensity.
Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.
Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.
Flesh Tone: Emphasize pink “flesh tone”.
Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion.
✎ Available in Standard mode only.
Picture Options
✎ When connecting a PC, you can only make changes to the
Color Tone, Size and HDMI Black Level.
Color Tone (Cool / Standard / Warm1 / Warm2)
Warm1 or Warm2 will be de activated when the picture mode
is Dynamic.
Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit the entire
screen. 4:3: Sets the picture to basic (4:3) mode.
✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit (DTV): Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
✎ HD (High Def inition): 16:9 - 1080i/1080p (1920x1080), 720p
(1280x720)
✎ Settings can be adjusted and stored for each external device
you have connected to an input on the TV.
✎ Picture Sizes available by Input Source:
Input Source Picture Size
ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i, 1080p), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
Digital Noise Filter (Off / Low / Medium / High / Auto): If the
16:9, Wide Fit, 4:3, Screen Fit
broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.
✎ When the signal is weak, try other options until the best
picture is displayed.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
✎ Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.
Picture Reset
Resets your current picture mode to its default settings.
Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.
- 6 -- 5 -
Sound Menu
Mode
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
SRS TruSurround HD
(standard sound mode only)
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).
✎ You can only select a language from among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
✎ Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Auto Volume
Because each broadcasting station has its own signal conditions, the volume may fluctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater.
Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source.
✎ By connecting the T V to a receiver or home theater with Dolby
Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound experience.
Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTER when done (0ms ~ 250ms).
Speaker Select
Speaker Select (External Speaker / TV Speaker): If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.
✎ When you set S peaker Select to External Speaker, the
TV’s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker both the T V’s speakers and the external speakers are on. You will hear sound through both.
✎ When Speaker Select is set to External Speaker, the
VOLUME and MUTE buttons will not operate and the sound
settings will be limited.
✎ If there is no video signal, both the TV’s spe akers and the
external speakers will be mute.
Sound Reset
Reset All: Resets all sound settings to the factory defaults.
Setup Menu
❑ Setting the Time
Time
✎ The current time will appear every time you press the INFO
button.
Clock: Setting the clock is for using various timer features of the TV.
✎ If you disconnect the power cord, you have to set the clock
again.
Clock Mode: Set the current time manually or automatically. Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎ Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone. DST (Daylight Saving Time): Switches the DST (Daylight Saving
Time) function on or off.
DST and Time Zone function is only available when the
Clock Mode is set to Auto.
Sleep Timer
Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
✎ To cancel the Sleep Timer, select Of f.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, am/pm and Activate / Inactivate. (To activate the timer with the setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
- 7 -
Contents: When the On Time is activated, you can turn on a specific channel or play back contents such as photo or audio files.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
- Music/Photo: Select the folder containing MP3/JPEG files on
the USB device.
✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.
❑ Other Features
Program Rating Lock
The Program Rating Lock feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identification number) before any of the Program Rating Lock restrictions are set up or changed.
Program Rating Lock is not available in HDMI or
Component mode.
✎ The default PIN number of a new T V set is “0-0-0-0”.
Program Rating Lock: You can block rated TV Programs.
TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching.
MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children.
Canadian English: You can block TV programs depending on their Anglophone Canadian.
Canadian French: You can block TV programs depending on their French Canadian rating.
Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.
Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confirm New PIN. When the Change PIN screen disappears, press the OK button. The TV has memorized your new PIN.
✎ If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to “0-0-0-0” :
POWER (off) MUTE 8 2 4 POWER (on)
Language
Set the menu language.
✎ Choose between English, Español and Français.
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.
✎ Precautions and limitations for game mode
x To disconnect th e game co nsole a nd connect another external
device, set Game Mode to Of f in the setup menu.
x If you display the TV menu in Game Mode, the screen shakes
slightly.
Game Mode is not available when the input source is set
to TV.
✎ Af ter connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
Caption
(On-Screen Text Messages)
Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
✎ The Caption feature does not work in Component or
HDMI mode.
Caption Mode: You can select the desired caption mode. Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions function works with digital channels.
Service1~6 may not be available in digital caption mode
depending on the broadcast.
Digital Caption Options: (digital channels only) Size: Options include Default, Small, Standard and Large. The
default is Standard. Font Style: Options include Default and Styles 0 to 7. The
default is Style 0. Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.
Digital Caption Options are available only when Default
and Ser vice1 ~ Service6 can be selected in Caption Mode.
✎ The Foreground and Background cannot be set to have
the same color.
Melody
Set so that a melody plays when the TV is turned on or off.
✎ The Melody does not play.
x When no sound is output from the T V because the M UTE
button h as been presse d.
x When no sound is output from the T V because the vo lume ha s
been reduced to minimum w ith the VOL – button.
x When the TV is turned off by Sleep Timer function.
Auto Protection Time
Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain
period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
- 8 -
00:04:03 / 00:07:38
1/1
Movie 01.avi
Eco Solution
P
POWER
SUM
3/15
I Love you
Jhon
Music 1
No Singer
Music 2
No Singer
Music 3
No Singer
Music 4
No Singer
Music 5
No Singer
I Love You
Jhon
1st Album Pop 2010
4.2MB
01:10 / 04:02
SUM
Image1024.jpg 1024x768 2011/10/24 3/15
Energy Saving (Off / Low / Medium / High / Picture Off) : This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
Eco Sensor (Off / On)
for LED 5000 series
: To enhance your power savings; the picture settings will automatically adapt to the light in the room.
✎ If you adjust the Backlight, the Eco Sensor will be set to
Off.
Min. Backlight: When Eco Sensor is On, the minimum screen
brightness can be adjusted manually.
✎ If Eco Sensor is On, the display brightne ss may change
(become slightly darker in most cases) depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby mode, if no picture is being received.
✎ Disabled when the PC is in power saving mode.
Auto Power Off (Off / On): The TV will be automatically turned off when no user operation is received for 4 hours.
Support Menu
Self Diagnosis
Picture Test: Use to check for picture problems. If the problem continues to occur, check the color pattern.
Sound Test: Use the built-in melody sound to check for sound problems.
Signal Strength: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Reset: Reset all settings to the factory defaults.
✎ The PIN input screen appears before the setup screen. ✎ Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
Media Play
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device.
MEDIA.P
❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play (USB) in Application menu.
❑ Using the Media Play Menu
Media Play
Videos
Change Device
1. Press the MENU button. Press the or button to select Application, then press the ENTER button.
2. Press the or button to select Media Play (USB), then
press the ENTER button.
3. Press the or button to select an icon (Videos, Music, Photos, Settings), then press the ENTER button.
✎ It might not work properly with unlicensed multimedia files. ✎ Need-to-Know List before using Media Play (USB)
x The file syste m supports FAT16, FAT32 and NTFS. x Certain t ypes of USB Digital camera and audio devices may not
be compatible with this T V.
x Media Play only supports USB Mass Storage Cla ss (MSC)
devices. MSC is a Mass Storage Class Bulk-On ly Transpor t device. Examp les of MSC a re Thumb drives and Flash Card Readers. Devices sho uld be connecte d directly to the T V’s USB port. USB HDD is not s uppor ted.
x Before conne cting your devic e to the TV, please back u p your
files to prevent them from damage or l oss of data. SAMSU NG is not responsibl e for any data file damage or data loss.
x A USB device that requires high power (more than 0.5A) may not
be supported.
x Do not disconnect the USB device while it is loading. x The higher the resolution of the image, the longer it takes to
display on the screen.
x The maximum supported JPEG resolution is 15360 x 8640 pixels. x If a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
x The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management (DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and comprehensive way, including protecting the rights and interests of content providers, preventing illegal copying of contents, and managing billings and settlements.
Enter Return
x PTP device is not supported. x If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be recognized or may malfunction.
x If the TV has no input during the time set in Auto Protection Time,
the Screensaver will run.
x The power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
x If you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
x If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played, connect the USB device to a PC, format the device, and check the connection.
x If a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to permanently delete the file.
x Photos only supports sequential jpeg format. x The scene search and thumbnail functions are not supported in the
Videos.
x If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some folders may not be opened.
x The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
x The media may not be playing smoothly when using the device
lower than USB 2.0.
Videos
Pause L Jump T Tools R Return
E
1. Press the or button to select Videos, then press the
ENTER button in the Media Play menu.
2. Press the /// button to select the desired video in the file
list.
3. Press the ENTER button or  (Play) button.
- The selected file is displayed on the top with its playing time.
- If video time information is unknown, playing time and the
progress bar are not displayed.
- During video playback, you can search using the and
button.
✎ In this mode, you can play movie clips contained in a game, but
you cannot play the game itself.
y Supported Subtitle Formats
- E xternal
Name File extension
MPEG-4 timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
- Internal
Name Container Format
Xsub AVI Picture Format
SubStation Alpha MKV Text Format
Advanced SubStation
Alpha
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format
MKV Text Format
y Supported Video Formats
File
Container Video Codec Resolution
Extension
*.mp4 MP4
*.avi
AVI,
*.mkv
MKV
*.asf
ASF
*.wmv
*.ts
*.trp
TS
*.tp
*.m2ts
*.dat
*.mpg
*.mpeg
*.3gp 3GPP
*.vob
*.flv
*.swf
PS
flash
formats
DivX
3.11/4.x/5.1/6.0
3.11/4.x/5.1/6.0
MPEG4 SP / ASP 1920x1080 6~30 30Mbps
DivX 3.11 / 4.x
/5.1 / 6.0
MPEG4 SP / ASP 1920x1080 6~30 30Mbps
H. 264 BP / MP
H. 264 BP / MP
MPEG4 SP / ASP 1920x1080 6~30 30Mbps
Sorenson H.263 1920x1080 6~30 30Mbps
1920x1080 6~30 30Mbps
H264 1920x1080 6~30 30Mbps
AVC 1920x1080 6~30 30Mbps
MJPEG 640x480 6~30 10Mbps
DivX
1920x1080 6~30 30Mbps
H264 1920x1080 6~30 30Mbps
MJPEG 640x480 6~30 10Mbps
1920x1080 6~30 30Mbps
H.264 1920x1080 6~30 30Mbps
MPEG2 1920x1080 6~30 30Mbps
1920x1080 6~30 30Mbps
/ HP
MPEG1 1920x1080 24/25/30 30Mbps
MPEG2 1920x1080 24/25/30 30Mbps
1920x1080 6~30 30Mbps
/ HP
H.264 1920x1080 6~30 30Mbps
H.264 1920x1080 6~30 30Mbps
Frame
rate(fps)
Bit
rate(Mbps)
Audio
Codec
MP3 /
ADPCM /
MP3 /
AC3 /
LPCM /
ADPCM
/ DTS
MP3 /
AC3 /
LPCM /
ADPCM
/ WMA /
WMA Pro
AC3 /
AAC /
MP3 /
DD+ /
HE-AAC
AC3 /
MPEG /
LPCM /
Other Restrictions
y Video content will not play, or not play correctly, if there is an error in the
content or the container.
y Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
y If the Index Table is in error, the Seek (Jump) function is not supported.
y The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
y Video content can not be played, if there are many contents in one file.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not supported)
WMA Lossless is not supported.
AAC
Core
AAC
MP3
MP3
Music
Playlist
Pause Jump Tools Return
1. Press the or button to select Music, then press the
ENTER button in the Media Play menu.
2. Press the /// button to select the desired Music in the file
list.
3. Press the ENTER button or (Play) button.
✎ During music playback, you can search using the and
button.

(REW ) and  (FF) buttons do not function during play.
✎ Only displays the files with MP3 and PCM file ex tension. Other
file extensions are not displayed, even if they are saved on the same USB device.
✎ If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Photos
Normal
Pause Previous/Next Tools Return
1. Press the or button to select Photos, then press the
ENTER button in the Media Play menu.
2. Press the /// button to select the desired photo in the file
list.
3. Press the ENTER button or  (Play) button.
✎ NOTE
x While a photo list is displayed, pre ss the
button o n the remote control to start the slide s how.
(Play) / ENTER
x All files in the file list section will be displ ayed in the s lide sh ow. x During the slide show, files are displayed in order. x During the slide show, you can adjust the slide show speed usi ng
(π) (RE W) or (µ) (FF) button.
x You can move to other file using or button.
y Supported Photo Formats
Image Photo Resolution
JPEG
Base-line 15360 x 8704
Progressive 1024 x 768
Other Restrictions
y CMYK, YCCK Color space JPEG are not supported.
Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
NOTE
x The
mark ap pears to the left of the selected fi les.
x To cance l a selection, press the Yellow button ag ain. x To desel ect all s elected file s, press the TOOLS button and select
Desel ect All.
3. Press the TOOLS button, and then select Play Selected Contents.
Playing the video/music/photo file group
1. While a file list is displayed, move to any file in desired group.
2. Press the TOOLS button, and then select Play Folder.
Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Category Operation Videos Music Photos
Title You can move the other file directly.
Repeat Mode
Picture Size
Picture Mode You can adjust the picture setting.
Sound Mode You can adjust the sound setting.
Subtile Setting
Audio Format
Audio Language
Stop Slide Show /
Start Slide Show
Slide Show Speed
Background Music
Zoom
Rotate
Information
You can play movie and music files repeatedly.
You can adjust the picture size to your preference.
You can play the video with Subtitles. This function only works if the subtitles are the same file name as the video.
You can select the digital audio output format.
You can change the audio language if the video has more than one language.
You can start or stop a Slide Show.
You can select the slide show speed during the slide show.
You can set and select background music when watching a Slide Show.
You can zoom into images in full screen mode.
You can rotate images in full screen mode.
You can see detailed information about the played file.
Settings
Using the Setup Menu
DivX® Video On Demand : Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed.
✎ For more information on DivX® VOD, visit “http://vod.div x.
com”.
Information: Select to view information on the connected device.
Other Information
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the
To prevent the TV from falling
product or injury to yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor.
1. Drive the screws into the clamps and firmly fasten them onto the
2. Remove the screws from the back center of the TV, put the
When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
NOTE
x Standard dimensions for wal l mount kits are shown in the table
below.
x When purcha sing our wall mount kit, a det ailed install ation
manual and all parts ne cess ary for assem bly are provided.
x Do not use screws that do not comply with the VESA standa rd
screw specifications.
x Do not use screws that are longer than the standard di mension
or do not comply with the VESA standard screw sp ecifications. Screws th at are too long may cau se damage to the ins ide of the TV set.
x For wall mounts that do not co mply wi th the VESA s tandard
screw specifications, the len gth of the screws may differ depen ding on th e wall mount spec ifications.
x Do not fasten the screws too firmly. Thi s may damage the
product or cause the product to fall, l eading to personal inju ry. Samsung is not lia ble for th ese kinds of accidents.
x Samsung is not l iable for product damage or personal injury
when a non-VESA or non-spec ified wall mount is used o r the consumer fail s to follow th e produc t installation i nstructions.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. Refer to the manual provided with the Kensington Lock for additional information on proper use.
may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
✎ Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
wall. Make sure the screws are firmly fixed into the wall.
screws into the clamps, and then fasten the screws onto the TV again.
the wall with a strong cable and then tie the string tightly.
✎ Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.
✎ Install the TV close to the wall so that it does not fall. ✎ It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV. Untie the string before moving the TV.
✎ Please find a “
” icon on the rear of the T V. The Kensington
slot is beside the “” icon.
✎ The position and color may differ depending on the model.
x Do not mount the T V at more than a 15 degree tilt.
x Always have two people mount the T V on a wall.
Product
Family
LED-TV
TV size in
VESA scew hole specs
inches
19~22 75 X 75
32~40 200 X 200 M6
46~60 400 X 400 M8
(A * B) in millimeters
26 100 X 100
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Standard
Screw
M4
Assembling the Wire Holder stand
Quantity
4
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Problem Possible Solution
Flickering and Dimming If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
Component Connections / Screen Color
Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
Trouble Powering On Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote
Stand Assembly • If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.
Cannot find channel • Re-run plug and play.
Poor picture First, perform the Picture Test and to see if your TV is properly displaying the test image.
The TV image does not look as good as it did in the store.
features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn these features off or on.
y Energy saving : User Menu Setup Eco Solution Energy Saving
y Eco Sensor : User Menu Setup Eco Solution Eco Sensor
If you find that the color on your Samsung television’s screen is not correct or black and White, first run a Self Diagnosis on the TV to make sure there are no device issues.
y Self Diagnosis : User Menu Support Self Diagnosis Picture Test
y If the test is ok, try making sure ;
y Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
you should check before calling for a repair.
y Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try
adjusting options mentioned above.
friendly No Signal Power Off feature.
First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with the TV still on but, turns it off after a certain period of time so as not to waste energy.
y Sleep Timer : User Menu Setup Time Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
y No Signal Power Off : User Menu Setup Eco Solution No Signal Power
y Auto Power Off : User Menu Setup Eco Solution Auto Power Off
and it will blink about 5 times before turning on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check before making a call to the service department.
y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Go to MENU - Support - Self Diagnosis - Picture Test If the test image is properly displayed, the poor picture may be caused by the source or signal.
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after performing Auto program.
✎ Many HD cha nnels a re up sca led fro m SD(Sta ndard D efinition) con tents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted: macroblock error, small block, dots, pixelization.
Color is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the correct jacks.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Incorrect or loose connections may cause color problems or a blank screen.
- 10 -- 9 -
There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
There is a dotted line on the edge of the screen.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1
When changing channels, the picture freezes or is distorted or delayed.
Sound Problem First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
There is no sound or the sound is too low at maximum volume.
The picture is good but there is no sound.
The speakers are making an inappropriate noise.
No Picture, No Video
The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.
There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
RF(Cable/Antenna) Connection
The TV is not receiving all channels. • Make sure the coaxial cable is connected securely.
No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.
The picture is distorted: macroblock, error, small block, dots, pixelization.
Others
Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection.
The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
The remote control does not work. • Replace the remote control batteries with correct polarity (+/–).
The cable/set top box remote control does not turn the TV on or off, or adjust the volume.
A “Mode Not Supported” message appears.
• Adjust Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to view the default picture setting. (go to MENU - Picture - Picture Reset)
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
on the TV.
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes)
• Set output resolution of the cable box to 1080i or 720p.
(go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may caused by the source or signal.
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• Reboot the connected device by reconnecting the device’s power cable.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to ‘Remote control does not work’ below.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
• Reboot the connected device by reconnecting the device’s power cable.
• Please try Auto Program to add available channels to the channel list. go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
• Some channels may not have caption data.
• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set­top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
• Adjust the picture size option on your external device or change the TV to full screen.
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the SAMSUNG TV code.
• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution settings in this manual.
- 14-- 13 -
- 11 -
Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
There is a plastic smell from the TV. • This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the Self Diagnosis Test menu.
TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.
The Channel menu is grey out (unavailable).
Your settings are lost after 30 minutes or every time the TV is turned off.
You have intermittent loss of audio or video.
You see small particles when you look closely at the edge of the frame of the TV.
POP (TV’s internal banner ad) appears on the screen.
✎ T his TF T LED pane l uses a pa nel co nsisti ng of sub pi xels whi ch requ ire soph isticated tech nolog y to produc e. However, there may be a few b right o r dark
pixels o n the scre en. The se pixels will have no impact on the pe rfor mance of the product.
Component.
Caption must be activated on the external device.
• This function is only available for digital channels from an Antenna / RF/Coax connection.
• The Channel menu is only available when you select the TV source.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU Setup Plug & Play ENTER.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
• This is part of the product’s design and is not a defect.
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
✎ Watc h these tr ouble shooti ng on vid eo at ww w.samsu ng.com/spsn. ✎ Some functions a nd pictures sho wn in this m anual a re avail able on s pecif ic mode ls only. ✎ You can keep your T V as optimum cond ition to upgrade the latest firmwa re on web si te (samsu ng.com Su ppor t Downl oads) by USB .
Storage and Maintenance
✎ If you attached some sticke rs on the T V scre en, it remains so me debr is afte r remov ing the sticker. Please clea n it to watch T V. ✎ T he exter ior and screen of the prod uct can g et scratc hed dur ing cle aning. Be sure to wi pe the ex terior a nd scre en care fully u sing a sof t cloth to p revent
scratch es.
Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water. Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
License
TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from
SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and delivering rich bass and clear dialog.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
SRS Labs, Inc.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung. com) Open Source License Notice is written only English.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss. request@samsung.com).
This product uses some software programs which are distributed under the Independent JPEG
Group.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
- 15 -
- 12 -
Specifications
Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity
Model Name
Display Resolution 1366 x 768 1366 x 768 1920 x 1080
Screen Size (Diagonal)
Sound Output 5W x 2 10W x 2
Dimensions (W x D x H) Body
With stand
Weight Without Stand With Stand
Model Name
Display Resolution 1920 x 1080
Screen Size (Diagonal)
Sound Output 10W x 2
Dimensions (W x D x H) Body
With stand
Weight Without Stand With Stand
UN26EH4000 UN26EH4050
26" Class
(26.0" measured diagonally)
24.2 X 3.6 X 14.3 inches
(615.1 X 93.3 X 365.6 (mm))
24.2 X 7.1 X 16.5 inches
(615.1 X 180.7 X 419.2 (mm))
9.2 Ibs (4.2 kg)
10.3 Ibs (4.7 kg)
UN40EH5000 UN40EH5050
40" Class
(40.0" measured diagonally)
36.5 X 3.6 X 21.6 inches
(927.6 X 93.0 X 551.0 (mm))
36.5 X 8.9 X 23.8 inches
(927.6 X 227.6 X 606.5 (mm))
19.8 Ibs (9.0 kg)
24.2 Ibs (11.0 kg)
✎ Design a nd spec ifications a re subje ct to chan ge with out pri or notice. ✎ T his devi ce is a Cla ss B digi tal app aratus. ✎ Fo r inform ation about powe r suppl y, and more ab out powe r consu mption, r efer to the l abel at tache d to the prod uct.
✎ Typical power consumption is measured according to Energy Star Program requirements for Televisions. ✎ D ispose unwanted e lectr onics through a n approve d recycler. To find the nea rest recycling l ocati on, go to our we bsite: w ww.sams ung.com /
recycl ingdir ect or ca ll, (877) 278-0799.
JACK PANEL DETAIL / REAR VIEW
1
2
3
Model name
UN26EH4000 / UN26EH4050
UN32EH4000 / UN32EH4050
UN32EH5000 / UN32EH5050
UN40EH5000 / UN40EH5050
UN46EH5000 / UN46EH5050
UN50EH5000 / UN50EH5050
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2012 Samsung Electronics America, Inc
1 2 3 4 5 6
5.4 3.6 2.8 13.9 3.9 3.9
7.4 3.4 1.9 18.9 7.8 7.8
7.4 3.4 4.2 19.0 7.8 7.8
9.6 5.8 6.2 24.1 7.8 7.8
11.6 5.2 7.7 29.8 15.7 15.7
12.5 6.7 8.5 31.3 15.7 15.7
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C ) 5% to 95%, non-condensing
UN32EH4000 UN32EH4050
32” Class
(31.5" measured diagonally)
29.0 X 3.6 X 17.1 inches
(738.8 X 93.3 X 436.7 (mm))
29.0 X 7.5 X 19.4 inches
(738.8 X 191.7 X 493.3 (mm))
12.5 Ibs (5.7 kg)
13.8 Ibs (6.3 kg)
UN46EH5000 UN46EH5050
46" Class
(45.9" measured diagonally)
41.7 X 3.7 X 24.6 inches
(1059.8 X 94.3 X 625.6 (mm))
41.7 X 8.9 X 26.7 inches
(1059.8 X 227.6 X 680.7 (mm))
27.5 Ibs (12.5 kg)
31.9 Ibs (14.5 kg)
5
6
4
- 16 -
UN32EH5000 UN32EH5050
32" Class
(31.5" measured diagonally)
29.0 X 3.6 X 17.5 inches
(738.3 X 93.2 X 444.9 (mm))
29.0 X 7.5 X 19.6 inches
(738.3 X 191.7 X 498.2 (mm))
13.0 Ibs (5.9 kg)
14.5 Ibs (6.6 kg)
UN50EH5000 UN50EH5050
50" Class
(49.5" measured diagonally)
44.7 X 3.7 X 26.3 inches
(1137.6 X 94.5 X 669.4 (mm))
44.7 X 8.9 X 28.5 inches
(1137.6 X 227.6 X 725.0 (mm))
34.6 Ibs (15.7 kg)
40.3 Ibs (18.3 kg)
(Unit:
inches
)
Loading...