Samsung UE32F5500, UE40F5500 Schematic
LED TV
Chassis : U85A
Model : UE32F45****
UE**F53****
UE**F55****
UE**F5700AW
SERVICE
LED TV Contents
1. Precautions
2. Product specications
3. Disassembly and Reassembly
4. Troubleshooting
5. Wiring Diagram
Manual
UE**F5500AW
Contents
1. Precautions ...................................................................................................................1-1
1-1. Safety Precautions ..............................................................................................................1-1
1-2. Servicing Precautions ..........................................................................................................1-3
1-3. Static Electricity Precautions ...............................................................................................1-4
1-4. Installation Precautions .......................................................................................................1-5
2. Product Specications.................................................................................................2-1
2-1. Product Information .............................................................................................................2-1
2-2. Specication Comparison to Old Models...........................................................................2-22
2-3. Accessories .......................................................................................................................2-23
3. Disassembly and Reassembly ....................................................................................3-1
3-1. Disassembly and Reassembly ............................................................................................3-1
3-2. Assy Board P-Jog Switch & Ir ..............................................................................................3-9
3-3. Disassembly(PTC) ............................................................................................................. 3-11
4. Troubleshooting ...........................................................................................................4-1
4-1. Troubleshooting ................................................................................................................... 4-1
4-2. How to Check Fault Symptom .............................................................................................4-3
4-3. Factory Mode Adjustments ................................................................................................ 4-23
4-4. White Balance ...................................................................................................................4-39
4-5. White Ratio (Balance) Adjustment .....................................................................................4-42
4-6. Detail Specications ..........................................................................................................4-44
4-7. Software Upgrade ............................................................................................................4-106
4-8. Rear Cover Dimension ....................................................................................................4-109
5. Wiring Diagram .............................................................................................................5-1
5-1. Wiring Diagram .................................................................................................................... 5-1
5-2. Connector ...........................................................................................................................5-2
5-3. Connector Functions ...........................................................................................................5-6
5-4. Cables .................................................................................................................................5-7
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved.
Printed in Korea
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
WARNING
3-1. Disassembly and Reassembly
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.
CAUTION
UE32F53**/55**/57**
Place TV face down on cushioned table.
If there is no additional coment, it is same for all inches.3.
Description Picture Description Screws
1
Remove 3 screws from the Stand and
2
Remove Stand.
Remove stand.
3
6003-001782
3-1
3-2
3. Disassembly and Reassemble
Description Picture Description Screws
Remove 10 screws of Rear Cover.
4
Remove the Cover Jack and Function Assy
5
Cable.
6003-001782
6003-002755
Remove the Rear Cover.
6
Remove 9 screws of Main Board and
7
Power Board.
6001-003016
3-3
3. Disassembly and Reassemble
Description Picture Description Screws
Remove the Speakers and Power Cables.
8
Remove the LVDS Cable and Panel Drive
9
Cable.
Completed disassembly.
10
3-4
3. Disassembly and Reassemble
UE40F53**/55**/57**
Description Picture Description Screws
Place TV face down on cushioned table.
1
Remove 4 screws from the Stand and
2
Remove Stand.
6003-001782
Remove 15 screws of Rear Cover.
3
6003-001782
6003-002755
3-5
3. Disassembly and Reassemble
Remove the Cover Jack.
4
Description Picture Description Screws
Lift up Rear Cover slightly from the bottom.
5
Disconnect the Function Assy Cable.
6
Remove the Rear Cover.
7
3-6
3. Disassembly and Reassemble
Description Picture Description Screws
Remove 9 screws of Main Board and
8
Power Board.
Remove the Speakers and Power Cables.
9
6001-003016
Remove the LVDS Cable and Panel Drive
10
Cable.
3-7
3. Disassembly and Reassemble
Description Picture Description Screws
Completed disassembly.
11
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3-8
3. Disassembly and Reassemble
Screw Size
Code No. COLOR A (mm) B (mm) C (mm) Q'ty
[F4500] 32" : 15EA
[F5300/5500/5700]
6003-001782 BLACK 7.80~8.30 11.20~12.00 3.81~3.91
6001-002755 BLACK 7.1~7.5 5.7~6.0 2.98~3.02
32/39" : 17EA,
40" : 17EA,
42" : 18EA,
46/50" : 20EA
39/40/42/46/50" :
32" : 2EA,
4EA
6001-003016 WHITE 7.1~7.5 4.7~5.0 2.92 ~ 2.9
6003-000115 BLACK 5.8~6.3 5.5~6.0 2.95~3.05
32/39/40/42/46/50"
: 9EA
[F4500] 32" : 6EA
[F5300/5500/5700]
32/39/42/46/50" :
2EA
3-9
3. Disassembly and Reassemble
3-2. Assy Board P-Jog Switch & Ir
How to disassembly
Description Picture Description Refer
Remove the screw.
1
Remove the Function Assy.
2
3-10
3. Disassembly and Reassemble
How to assembly
Description Picture Description Refer
Check the locking hole.
1
Combine the function assy to locking hole.
2
When you want to ignore the funtion key actions
Option
Control
Debug
SVC
ADC/WB
Advanced
Cong Option Navigation Key Func
0 : New Function (Naviagtion) Key
1 : Old Function (Touch) Key
2 : Do not work Function key
[ Default ]
3-11
3. Disassembly and Reassemble
3-3. Disassembly(PTC)
How to disassembly
Description Picture Description Refer
Place TV face up on cushioned table.
1
Products at the top of the central TOP-
2
CHASSIS is rotated by 45 degrees outward
and pulls.
3-12
3. Disassembly and Reassemble
Description Picture Description Refer
Pull in the same way from the center of the
3
top.
Pull the left part of the product as shown
4
while holding the raised portion on gure 3.
Pull the bottom part of the product as
5
gure 2 while holding the raised portion on
gure 4.
3-13
3. Disassembly and Reassemble
Description Picture Description Refer
As shown in the picture, Lift the bottom of
6
the TOP-CHASSIS.
Pull the products at the bottom of the right
7
side of the chassis.
3. Disassembly and Reassemble
Description Picture Description Refer
Lift the bottom of the chassis with one
8
hand and holding the bottom of the product
after you pull the right side of the product
chassis.
Disassembly is complete.
9
CAUTION
To use JIG : Does not lift the chassis by
hand, JIG using the lift.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3-14
1. Precautions
1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
For continued safety, do not attempt to modify the circuit board.
WARNING
1-1-2. Servicing the LED TV
When servicing the LED TV, Disconnect the AC line cord from the AC outlet.1.
It is essential that service technicians have an accurate voltage meter available at all times. Check the calibration of this 2.
meter periodically.
1-1-3. Fire and Shock Hazard
Before returning the monitor to the user, perform the following safety checks:
Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the 1.
chassis and other metal parts in the monitor.
Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and 2.
compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.
Leakage Current Hot Check:3.
Disconnect the AC power and DC power jack before servicing.
(READING SHOULD)
DEVICE
UNDER
TEST
ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
NOT BE ABOVE 0.5mA
2-WIRE CORD
TEST ALL
EXPOSED METAL
SURFACES
LEAKAGE
CURRENT
TESTER
EARTH
GROUND
Do not use an isolation transformer during this test.
Use a leakage current tester or a metering system that complies with American National Standards
WARNING
Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL
Publication UL1410, 59.7).
With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch rst 4.
in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.)
and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.
1-1
1-2
1. Precautions
1-1-4. Product Safety Notices
Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual
inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,
wattage, etc. Parts that have special safety characteristics are identied by on schematics and parts lists. A substitute
replacement that does not have the same safety characteristics as the recommended replacement part might create
shock, re and/or other hazards. Product safety is under review continuously and new instructions are issued whenever
appropriate.
1-3
1. Precautions
1-2. Servicing Precautions
An electrolytic capacitor installed with the wrong polarity might explode.
WARNING
Before servicing units covered by this service manual, read and follow the Safety Precautions section of
CAUTION
NOTE
1-2-1. General Servicing Precautions
Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before 1.
attempting to: (a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect
a test component in parallel with an electrolytic capacitor.
Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes used. 2.
The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements
to their original position.
After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that 3.
the area around the serviced part has not been damaged.
Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input 4.
terminals and earphone jacks).
Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect 5.
an insulation resistance meter (500 V) to theblades of the AC plug. The insulation resistance between each blade of the
AC plug and accessible conductive parts (see above) should be greater than 1 megohm.
Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; 6.
always remove the instrument’s ground lead last.
this manual.
If unforeseen circumstances create conict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.
1-4
1. Precautions
1-3. Static Electricity Precautions
Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect
transistors. The following techniques will reduce the incidence of component damage caused by static electricity.
Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your 1.
body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard,
be sure to remove the wrist strap before applying power to the monitor.
After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent 2.
accumulation of an electrostatic charge.
Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.3.
Use only a grounded-tip soldering iron to solder or desolder ESDs.4.
Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate 5.
electrical charges sufcient to damage ESDs.
Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs 6.
are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive
materials.
Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material 7.
to the chassis or circuit assembly into which the device will be installed.
Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
CAUTION
Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or 8.
lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.
1-5
1. Precautions
1-4. Installation Precautions
For safety reasons, more than a people are required for carrying the product.1.
Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.2.
Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature 3.
may cause re.
Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed 4.
to moisture. Otherwise, it may cause a re or electric shock.
Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check 5.
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric
shock.
Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the 6.
antenna falling over may cause re or electric shock.
When installing the product, leave enough space (0.4m) between the product and the wall for ventilation purposes. 7.
A rise in temperature within the product may cause re.
If an equipment is provided with a replaceable battery, and if replacement by an incorrect type could result in an 8. 8.
explosion (for example, with some lithium batteries), the following applies:
Risk of explosion if battery is replaced by an incorrect type dispose of used batteries according to •
the instructions.
Do not dispose of batteries in a re.•
Do not short circuit, disassemble or overheat the batteries.•
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent •
type.
Do not be exposed to excessive heat such as sunshine, re or the like.•
2. Product Specications
2-1. Product Information
2-1-1. Model Comparison
Model UE**F5500
2. Product specications
W
Front View
D
Detail View
Front Color Black (Panel)
Set with
32F45
32F53
32F55
32F57
39F53
39F55
39F57
Dimensions
(W x H x D)
42F53
42F55
42F57
46F53
46F55
46F57
50F55
50F57
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
738.0 x 509.6 x 265.0 mm / 29.1 x 20.1 x 10.4 inches
895.6 x 596.2 x 265.0 mm / 35.3 x 23.5 x 10.4 inches
971.8 x 640.4 x 265.0 mm / 38.3 x 25.2 x 10.4 inches
1059.6 x 700.0 x 307.3 mm / 41.7 x 27.6 x 12.1 inches
1059.6 x 626.2 x 49.4 mm / 41.7 x 24.7 x 1.9 inches
1135.4 x 741.8 x 307.3 mm / 44.7 x 29.2 x 12.2 inches
1135.4 x 668.0 x 49.8 mm / 44.7 x 26.3 x 2.0 inches
* W : Width H : High D : Depth
750.9 x 476.9 x 207.8 mm / 29.6 x 18.8 x 8.2 inches
750.9 x 456.6 x 59.3 mm / 29.6 x 18.0 x 2.3 inches
738.0 x 445.4 x 49.0 mm / 29.1 x 17.5 x 1.9 inches
895.6 x 533.0 x 49.4 mm / 35.3 x 21.0 x 1.9 inches
971.8 x 626.2 x 49.4 mm / 38.3 x 24.7 x 1.9 inches
H
2-1
2-2
2. Product specications
Set with
32F45
32F53
32F55
32F57
39F53
39F55
39F57
Weight
42F53
42F55
42F57
46F53
46F55
46F57
50F55
50F57
Panel Type Anti Glare
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
5.6 kg / 12.3 lbs
5.3 kg / 11.7 lbs
5.7 kg / 12.6 lbs
5.0 kg / 11.0 lbs
8.5 kg / 18.7 lbs
7.6 kg / 16.8 lbs
9.6 kg / 21.2 lbs
8.4 kg / 18.5 lbs
11.5 kg / 25.4 lbs
10.8 kg / 23.8 lbs
14.7 kg / 32.4 lbs
13.0 kg / 28.7 lbs
Internal Memory 4 GByte
DDR 1 GByte
Feature Smart TV
2-3
2. Product specications
Model UE40F5500
W
Front View
D
* W : Width H : High D : Depth
Detail View
Front Color Black (Panel)
Dimension
40F53
40F55
40F57
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
Set with
Stand
Set without
Stand
928.2 x 612.2 x 235.0 mm / 36.5 x 24.1 x 9.3 inches
928.2 x 552.3 x 49.4 mm / 36.5 x 21.7 x 1.9 inches
928.2 x 615.5 x 265.0 mm / 36.5 x24.2 x 10.4 inches
928.2 x 552.3 x 49.4 mm / 36.5 x 21.7 x 1.9 inches
928.2 x 615.5 x 265.0 mm / 36.5 x24.2 x 10.4 inches
928.2 x 552.3 x 49.4 mm / 36.5 x 21.7 x 1.9 inches
Set with
40F53
Stand
Set without
Stand
Set with
Weight
40F55
Stand
Set without
Stand
Set with
40F57
Stand
Set without
Stand
Panel Type Anti Glare
H
9.5 kg / 20.9 lbs
8.0 kg / 17.6 lbs
8.9 kg / 19.6 lbs
8.0 kg / 17.6 lbs
8.9 kg / 19.6 lbs
8.0 kg / 17.6 lbs
Internal Memory 4 GByte
DDR 1 GByte
Feature Smart TV
2-4
2. Product specications
2-1-2. Feature & Specications
(x : W=DVB-TC / K=DVB-T2C / Y=DVB-T2C+MHP)
Model UE32F450*Ax / UE32F451*Ax
UE32F4570/4580S (DVB-TCS2)
Feature
Digital-TV, RF, 3-HDMI, 1-Component, 1-A/V, 1-Scart, 2-USB2.0, 1-LAN•
Brightness : 250 cd/m•
Response Time : 6.5 ms•
CMR : 100•
Dolby Digital+, DTS Studio Sound, DTS Premium Audio 5.1•
No Portable USB HDD Supported•
Item Description
LCD Panel 32 inch FHD 60Hz
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
2
Specications
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1366 Pixels
Vertical : 768 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 74.25 MHz
Active Display (H x V)*
* Horizontal x Vertical
AC Power Voltage & Frequency [EU : AC 220~240V, CIS : AC 110~240V], 50/60 Hz
Power Consumption 68 W (Under 0.3 W, Stand by) , (AC 220~240V, EU)
Dimensions Set (W x H x D)*
* Width x High x Depth
Weight Set with Stand 5.6 kg / 12.35 lbs
TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)
703.4(H) X 397.8(V) (mm) / 28.7(H) X 16.2(V) (inches)
70 W (Under 0.3 W, Stand by) , (AC 100~240V, CIS)
Set with Stand 750.9 x 476.9 x 207.8 mm / 29.6 x 18.8 x 8.2 inches
Set without
Stand
Set without
Stand
750.9 x 456.6 x 59.3 mm / 29.6 x 18.0 x 2.3 inches
5.3 kg / 11.68 lbs
System DVB-TC/T2C/TCS2(depend on country), PAL , SECAM , NT4.43
Sound PAL-B/G/I/D/K, Dolby Digital Plus/Pulse
2-5
2. Product specications
Specications
Item Description
Environmental Considerations Operating Temperature : 32˚F ~ 122˚F (0˚C ~ 50˚C)
Operating Humidity : 20% ~ 90%
Storage Temperature : -4˚F ~ 140˚F (-20˚C ~ 60˚C)
Storage Humidity : 10% ~ 90%
Audio Specications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
RF : 20 Hz ~ 15.4 kHz•
AV/Componet/HDMI : 20 Hz ~ 20 kHz•
Note : Dolby Digital +, DTS Studio Sound, Game Mode, Film Mode, SmartTV
2-6
2. Product specications
Model UE32F530*Ax / UE32F550*Ax / UE32F5700Ax
UE32F5370S / UE32F5570S (DVB-TCS2)
Feature
Digital-TV, RF, 3-HDMI, 1-Component, 1-A/V, 1-Scart, 2-USB2.0, 1-LAN, WiFi Built-in(Excepted for UF53xx •
models)
Brightness : 300 cd/m•
2
Response Time : 6.5 ms•
CMR : 100•
Dolby Digital+, DTS Studio Sound, DTS Premium Audio 5.1•
No Portable USB HDD Supported•
Specications
Item Description
LCD Panel 32 inch FHD 60Hz
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 74.25 MHz
Active Display (H x V)*
* Horizontal x Vertical
698.4(H) X 392.9(V) (mm) / 28.5(H) X 16.0(V) (inches)
AC Power Voltage & Frequency [EU : AC 220~240V, CIS : AC 110~240V], 50/60 Hz
Power Consumption 85 W (Under 0.3 W, Stand by) , (AC 220~240V, EU)
86 W (Under 0.3 W, Stand by) , (AC 100~240V, CIS)
Dimensions Set (W x H x D)*
* Width x High x Depth
Set with Stand 738.0 x 509.6 x 265.0 mm / 29.1 x 20.1 x 10.4 inches
Set without
Stand
738.0 x 445.4 x 49.0 mm / 29.1 x 17.5 x 1.9 inches
Weight Set with Stand 5.70 kg / 12.57 lbs
Set without
Stand
5.00 kg / 11.02 lbs
TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)
System DVB-TC/T2C/TCS2(depend on country), PAL , SECAM , NT4.43
Sound PAL-B/G/I/D/K, Dolby Digital Plus/Pulse
2-7
2. Product specications
Specications
Item Description
Environmental Considerations Operating Temperature : 32˚F ~ 122˚F (0˚C ~ 50˚C)
Operating Humidity : 20% ~ 90%
Storage Temperature : -4˚F ~ 140˚F (-20˚C ~ 60˚C)
Storage Humidity : 10% ~ 90%
Audio Specications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
RF : 20 Hz ~ 15.4 kHz•
AV/Componet/HDMI : 20 Hz ~ 20 kHz•
Note : Dolby Digital +, DTS Studio Sound, DTS premium sound, Game Mode, Film Mode, Eco Sensor, SmartTV
2-8
2. Product specications
Model UE39F5300Ax / UE39F5500Ax /UE39F5700Ax
UE39F5370S / UE39F5570S (DVB-TCS2)
Feature
Digital-TV, RF, 3-HDMI, 1-Component, 1-A/V, 1-Scart, 2-USB2.0, 1-LAN, WiFi Built-in(Excepted for UF53xx •
models)
Brightness : 300 cd/m•
2
Response Time : 6.5 ms•
CMR : 100•
Dolby Digital+, DTS Studio Sound, DTS Premium Audio 5.1•
No Portable USB HDD Supported•
Specications
Item Description
LCD Panel 39 inch FHD 60Hz
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 74.25 MHz
Active Display (H x V)*
* Horizontal x Vertical
895.6(H) X 523.7(V) (mm) / 36.6(H) X 21.4(V) (inches)
AC Power Voltage & Frequency [EU : AC 220~240V, CIS : AC 110~240V], 50/60 Hz
Power Consumption 105 W (Under 0.3 W, Stand by) , (AC 220~240V, EU)
107 W (Under 0.3 W, Stand by) , (AC 100~240V, CIS)
Dimensions Set (W x H x D)*
* Width x High x Depth
Set with Stand 895.6 x 596.2 x 265.0 mm / 35.3 x 23.5 x 10.4 inches
Set without
Stand
895.6 x 533.0 x 49.4 mm / 35.3 x 21.0 x 1.9 inches
Weight Set with Stand 8.50 kg / 18.74 lbs
Set without
Stand
7.60 kg / 16.76 lbs
TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)
System DVB-TC/T2C/TCS2(depend on country), PAL , SECAM , NT4.43
Sound PAL-B/G/I/D/K, Dolby Digital Plus/Pulse
Loading...