Samsung UE19D4010NW, UE19D4000NW QUICK GUIDE [it]
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country |
Customer Care Centre |
Web Site |
|
|
|
ALBANIA |
42 27 5755 |
- |
|
|
|
AUSTRIA |
0810 - SAMSUNG (7267864, € 0.07/min) |
www.samsung.com |
|
|
|
BELGIUM |
02-201-24-18 |
www.samsung.com/be (Dutch) |
|
|
www.samsung.com/be_fr (French) |
BOSNIA |
05 133 1999 |
- |
|
|
|
BULGARIA |
07001 33 11 |
www.samsung.com |
|
|
|
CROATIA |
062 SAMSUNG (062 726 7864) |
www.samsung.com |
|
|
|
CZECH |
800 - SAMSUNG (800-726786) |
www.samsung.com |
|
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 |
|
|
|
|
DENMARK |
70 70 19 70 |
www.samsung.com |
|
|
|
FINLAND |
030 - 6227 515 |
www.samsung.com |
|
|
|
FRANCE |
01 48 63 00 00 |
www.samsung.com |
GERMANY |
01805 - SAMSUNG(726-7864 € 0,14/Min) |
www.samsung.com |
GREECE |
"1. Για προϊόντα πληροφορικής και κινητής τηλεφωνίας |
www.samsung.com |
|
Από σταθερό 80111-SAMSUNG (80111 7267864), αστική χρέωση |
|
|
Από κινητό 210 6897691 |
|
|
2. Για φωτογραφικές μηχανές, βιντεοκάμερες, τηλεοράσεις & οικιακές συσκευές |
|
|
Από κινητό και σταθερό 2106293100" |
|
|
|
|
HUNGARY |
06-80-SAMSUNG(726-7864) |
www.samsung.com |
|
|
|
ITALIA |
800-SAMSUNG(726-7864) |
www.samsung.com |
|
|
|
KOSOVO |
+381 0113216899 |
- |
LUXEMBURG |
261 03 710 |
www.samsung.com |
|
|
|
MACEDONIA |
023 207 777 |
- |
|
|
|
MONTENEGRO |
020 405 888 |
- |
|
|
|
NETHERLANDS |
0900-SAMSUNG (0900-7267864) (€ 0,10/Min) |
www.samsung.com |
|
|
|
NORWAY |
815-56 480 |
www.samsung.com |
POLAND |
0 801 1SAMSUNG(172678) / 022-607-93-33 |
www.samsung.com |
|
|
|
PORTUGAL |
80820-SAMSUNG(726-7864) |
www.samsung.com |
|
|
|
RUMANIA |
"1. 08010 SAMSUNG (72678) – doar din reţeaua Romtelecom, tarif local; |
www.samsung.com |
|
2. 021.206.01.10 – din orice reţea, tarif normal " |
|
SERBIA |
0700 Samsung (0700 726 7864) |
www.samsung.com |
SLOVAKIA |
0800 - SAMSUNG(0800-726 786) |
www.samsung.com/sk |
|
|
|
SPAIN |
902 - 1 - SAMSUNG (902 172 678) |
www.samsung.com |
|
|
|
SWEDEN |
0771 726 7864 (SAMSUNG) |
www.samsung.com |
|
|
|
SWITZERLAND |
0848 - SAMSUNG(7267864, CHF 0.08/min) |
www.samsung.com/ch |
|
|
www.samsung.com/ch_fr/(French) |
U.K |
0330 SAMSUNG (7267864) |
www.samsung.com |
|
|
|
EIRE |
0818 717100 |
www.samsung.com |
|
|
|
LITHUANIA |
8-800-77777 |
www.samsung.com |
|
|
|
LATVIA |
8000-7267 |
www.samsung.com |
|
|
|
ESTONIA |
800-7267 |
www.samsung.com |
|
|
|
TURKEY |
444 77 11 |
www.samsung.com |
|
|
|
LED TV
User Manual
E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model______________ Serial No.______________
© 2011 Samsung Electronics Co., Ltd. All rights reserved. |
BN68-03420C-02 |
|
For more information on how to use e-Manual (P. 12)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
1.Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2.DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.
3.Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4.Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.
5.Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6.For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
•Avoid displaying the same TV channel for long periods.
•Always try do display any image on full screen, use TV set picture format menu for best possible match.
•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
•Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The appearance may differ depending on the product. |
|
|
|
Be careful when you contact the TV because some parts can be somewhat hot. |
|
|
|
Installation with a stand. |
Installation with a wall-mount. |
10 cm
10 cm |
10 cm |
|
10 cm |
10 cm |
10 cm |
|
10 cm |
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
English - 2
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.The items’ colours and shapes may vary depending on the models.
Cables not included in the package contents can be purchased separately.
CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
yy Remote Control & Batteries (AAA x 2) yy Owner’s Instructions
yy Warranty Card / Safety Guide (Not available in some locations)
yy Power Cord
yy Cleaning Cloth
|
|
|
|
|
|
|
|
yy Component / AV Adapter |
yy Scart Adapter |
yy CI Card Adapter |
|||||
An administration fee may be charged if either
(a)an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual)
(b)you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
English - 3
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Control Panel
Speakers
Remote control sensor |
Aim the remote control towards this spot on the TV. |
Power Indicator |
Blinks and turns off when the power is on and lights up in standby mode. |
SOURCEE |
Toggles between all the available input sources. In the on-screen menu, use this |
|
button as you would use the ENTEREbutton on the remote control. |
MENU |
Displays an on-screen menu, the OSD (on screen display) of your TV’s features. |
Y |
Adjusts the volume. In the OSD, use the Ybuttons as you would use the ◄ |
|
and ► buttons on the remote control. |
z |
Changes the channels. In the OSD, use the zbuttons as you would use the |
|
▼ and ▲ buttons on the remote control. |
P(Power) |
Turns the TV on or off. |
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English - 4
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and Volume buttons.
Turns the TV on and off. |
Displays and selects the available video |
|
sources. |
||
|
HDMI 
Selects the HDMI mode directly.
Press to directly access to channels.
Alternately select Teletext ON, Double, Mix |
Returns to the previous channel. |
or OFF. |
Cuts off the sound temporarily. |
|
|
Adjusts the volume. |
Changes channels. |
|
|
Displays the main on-screen menu. |
|
|
Displays channel lists on the screen. |
Displays the My Downloads, Watch TV and Source.
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
Buttons used in the Channel List,
Channel Manager, My Downloads menu, etc.
Use these buttons in a specific feature. For details, refer to the e-Manual.
CONTENT
A B C D
P.MODE |
SRS |
DUALI-II |
E-MANUAL AD/SUBT.
Displays the EPG (Electronic Programme Guide).
Displays information on the TV screen.
Exits the menu.
P.MODE: Selects picture mode.
SRS: Selects the SRS TruSurround HD mode.
DUAL I-II: Select Dual sound mode. E-MANUAL: Displays the e-Manual guide. P.SIZE: Selects the picture size.
AD: Audio Description selection. (Not available in some locations)
SUBT.: Displays digital subtitles.
Installing batteries (Battery size: AAA)
English - 5
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.Preset: Connecting the mains and antenna.
TV Rear Panel |
Cable |
VHF/UHF Antenna |
or
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the input source is set to TV.
To return to the previous step, press the Red button.
1 |
Selecting a language |
2 |
Selecting Store Demo |
|
or Home Use |
3 |
Selecting a country |
4 |
Setting the Clock |
|
Mode |
5 |
Selecting an antenna |
6 |
Selecting a channel |
7 |
Enjoy your TV. |
Press the ▲ or ▼ button, then press the ENTEREbutton. |
POWER |
Select the desired OSD (On Screen Display) language. |
P |
Press the ◄ or ► button, then press the ENTEREbutton. |
|
Select the Home Use mode. Store Demo mode is for retail |
|
environments. |
|
To return the unit’s settings from Store Demo to Home Use (standard): |
|
Press the volume button on the TV. When the OSD volume is displayed, |
|
press and hold MENU for 5 sec. |
|
Store Demo is only for shop display. If you select it, several functions |
|
are not able to use. Please select Home Use when you watch at home. |
|
Press the ▲ or ▼ button, then press the ENTEREbutton. |
|
Select the appropriate country.
After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.
When you input the PIN number, 0-0-0-0 is not available.
The option may differ depending on country. Set the Clock Mode automatically or manually.
Auto: Select the time zone (depending on the country) where you are located. Manual: Allows you to manually set the current date and time.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired broadcasting signal.
Press the ▲ or ▼ button, then press the ENTEREbutton.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning.
Press the ENTEREbutton at any time to interrupt the memorisation process. Select the Watch TV. Press the ENTEREbutton.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
English - 6
Connecting to an AV devices
¦¦ Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR, Digital Audio System, Amplifier, DVD Home Theatre, PC
HDMI, HDMI/DVI connection
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
HDMI IN 1(DVI), 2, PC/DVI AUDIO IN
xx For better picture and audio quality, connect to a digital device using an HDMI cable.
xx An HDMI cable supports digital video and audio signals, and does not require an audio cable.
–– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
xx Be sure to use an HDMI cable with a thickness of 14 mm or less.
xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
xx A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.
English - 7
Component connection
|
|
|
|
G |
|
|
|
|
|
|
|
G |
||
|
|
|
|
B |
|
|
|
|
|
|
|
|
|
B |
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
R |
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
W |
|
|
|
|
|
|
|
W |
||
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPONENT OUT
PR PB Y
AUDIO OUT
R-AUDIO-L
AV connection
VIDEO OUT
Y |
W R
Y
AUDIO OUT 
R
W
R-AUDIO-L
SCART connection
EXT
Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable
In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
English - 8
Connecting to a PC and Audio device
¦¦ Available devices: Digital Audio System, Amplifier, DVD Home Theatre
Audio connection
OPTICAL
Headphones connection
Using an Optical (Digital) cable or Headphone Connection
DIGITAL AUDIO OUT (OPTICAL)
xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV. xx Headphone volume and TV volume are adjusted separately.
English - 9
¦¦ Using an HDMI cable or HDMI to DVI Cable / a D-sub Cable
Connecting through the HDMI cable may not be supported depending on the PC.
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC connection |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI OUT |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVI OUT |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Display Modes (D-Sub and HDMI/DVI Input) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC OUT |
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
Optimal resolution is 1360 x 768 @ 60Hz. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
Mode |
|
Resolution |
Horizontal Frequency |
|
Vertical Frequency (Hz) |
|
|
Pixel Clock Frequency |
Sync Polarity (H / V) |
||||||||||||||||||||||
|
(KHz) |
|
|
|
|
|
|
|
(MHz) |
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
IBM |
|
640 x 350 |
31.469 |
|
|
|
|
70.086 |
|
|
|
|
25.175 |
|
|
+ / - |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
720 x 400 |
31.469 |
|
|
|
|
70.087 |
|
|
|
|
28.322 |
|
|
- / + |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
MAC |
|
640 x 480 |
35.000 |
|
|
|
|
66.667 |
|
|
|
|
30.240 |
|
|
- / - |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
832 x 624 |
49.726 |
|
|
|
|
74.551 |
|
|
|
|
57.284 |
|
|
- / - |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
31.469 |
|
|
|
|
59.940 |
|
|
|
|
25.175 |
|
|
- / - |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
640 x 480 |
37.861 |
|
|
|
|
72.809 |
|
|
|
|
31.500 |
|
|
- / - |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
37.500 |
|
|
|
|
75.000 |
|
|
|
|
31.500 |
|
|
- / - |
|||||||||||
|
|
|
|
|
|
|
37.879 |
|
|
|
|
60.317 |
|
|
|
|
40.000 |
|
|
+ / + |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
VESA DMT |
|
800 x 600 |
48.077 |
|
|
|
|
72.188 |
|
|
|
|
50.000 |
|
|
+ / + |
|||||||||||||||
|
|
|
46.875 |
|
|
|
|
75.000 |
|
|
|
|
49.500 |
|
|
+ / + |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
48.363 |
|
|
|
|
60.004 |
|
|
|
|
65.000 |
|
|
- / - |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
1024 x 768 |
56.476 |
|
|
|
|
70.069 |
|
|
|
|
75.000 |
|
|
- / - |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
60.023 |
|
|
|
|
75.029 |
|
|
|
|
78.750 |
|
|
+ / + |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
1360 x 768 |
47.712 |
|
|
|
|
60.015 |
|
|
|
|
85.500 |
|
|
+ / + |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English - 10
Changing the Input Source
¦¦ Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
■■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / USB
In the Source List, connected inputs will be highlighted.
If you want to see connected devices only, move to Connected using ◄ or ► button.Ext. and PC always stay activated.
If the connected external devices are not highlighted, press the red button. The TV will search for connected devices.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.
When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under
Edit Name. Information
You can see detailed information about the selected external device.
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
xx Maximum thickness - 0.55 inches (14mm)
Connecting to a COMMON INTERFACE slot
Attaching the CI Card Adaptor
Attach the adapter as shown in the right.
To connect the CI CARD Adapter, follow these steps.
Make sure that you attach the adaptor before you mount the TV on a wall. 1. Insert the CI CARD Adapter into the two holes on the product 1.
Please find the two holes on the rear of the TV. The two holes are beside the COMMON INTERFACE port.
Press it firmly at center of adapter to ensure it is fully lock.
2. Connect the CI CARD Adapter into the COMMON INTERFACE port. 3. Insert the “CI or CI+ CARD”.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
yy If you do not insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.
yy The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
yy When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE xx You must obtain a “CI or CI+ CARD” from a local cable service provider.
xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
xx Insert the “CI or CI+ CARD” in the direction marked on the card.
xx The location of the COMMON INTERFACE slot may be different depending on the model.
xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.
xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
English - 11
How to view the e-Manual
E-MANUAL You can find instructions about your TV’s features in the e-Manual in your TV. To
use, press the E-MANUAL button on your remote. Move the cursor using the up/
down/right/left buttons to highlight a category, then a topic, and then press the
ENTEREbutton. The e-Manual displays the page you want to see. You can also access it through the menu:
OO MENUm→ Support → e-Manual → ENTERE
To return to the e-Manual main menu, press the E-MANUAL button on the remote.You cannot use Try Now directly if the TV is set to an external input source.
Screen Display
1
2
Basic Features
Picture Menu |
3 |
Sound Menu
}Index EEnter eExit
4 5 6
1Currently displayed video, TV Programme, etc.
2The category list. Press ◄ or ► button to select category you want.
3Displays the sub-menu list. Use the arrow buttons on your remote to move the cursor. Press ENTERE button to select the sub-menu you want.
4}Blue (Index): Displays the index screen.
5EEnter: Selects a category or sub-menu.
6e Exit: Exit the e-Manual.
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
Basic Features > Picture Menu (3/17)
aTry Now
E-MANUAL
aTry Now bHome {Zoom }Index LPage eExit
This function is not enabled in some menus.
Method 1
Picture |
Picture Mode |
: Standard |
► |
|
|||
|
Backlight |
: 7 |
|
|
Contrast |
: 95 |
|
|
Brightness |
: 45 |
|
|
Sharpness |
: 50 |
|
|
Colour |
: 50 |
|
|
Tint (G/R) |
: G50/R50 |
|
|
Screen Adjustment |
|
|
|
|
|
|
Method 2
1.If you want to use the menu that corresponds to an e-Manual topic, press the red button to select Try Now.
2.To return to the e-Manual screen, press the E-MANUAL button.
1.Press the ENTEREbutton when a topic is displayed. “Are you sure?” appears. Select Yes, and then press the ENTEREbutton. The OSD window appears.
2.To return to the e-Manual screen, press the E-MANUAL button.
English - 12
Viewing the Contents
Basic Features > Picture Menu (3/17)
1
aTry Now bHome {Zoom }Index LPage eExit
2 |
3 |
4 |
5 |
Using the Zoom mode
1Contents Area: Contains the topic contents, if you selected a sub-menu. To move previous or next page, press the ◄ / ► button.
2Try Now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual screen, press the E-MANUAL button.
3Home: Moves to the e-Manual home screen.
4Zoom: Magnifies a screen. You can scroll through the magnified screen by using ▲ / ▼ buttons.
5L(Page): Moves to previous or next page.
Select the Zoom, and then press ENTEREto magnify the screen. You can scroll through the magnified screen by using the ▲ or ▼ buttons.
To return to the screen to normal size, press the RETURN button.
UMove RReturn
How to search for a topic on the index page
This function may not be supported depending on the language.
1.If you want to search a keyword, press the blue button to select Index.
2.Press the ◄ or ► button to select a character order you want.
3.Press the ▲ or ▼ button to select a keyword you want to see, and then press the ENTEREbutton.
4.You can view the corresponding e-Manual instruction screen.To close the Index screen, press the RETURN button.
English - 13
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications (VESA)
Case A. Installing the SAMSUNG Wall-Mount |
Case B. Installing another company’s Wall-Mount |
1 |
1 |
Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
xx Do not exceed 15 degrees tilt when mounting this TV.
Product |
inches |
VESA Spec. (A * B) |
Standard Screw |
Quantity |
|
Family |
|||||
|
|
|
|
||
|
19~22 |
75 X 75 |
M4 |
|
|
|
|
|
|
||
|
27 |
200 X 100 |
|
||
|
|
|
|||
|
|
|
|
|
|
LED-TV |
32~40 |
200 X 200 |
|
4 |
|
|
|
|
|||
46~60 |
400 X 400 |
M8 |
|||
|
|
||||
|
|
|
|
||
|
65~75 |
600 X 400 |
|
||
|
|
|
|||
|
|
|
|
|
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
English - 14
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit “www.samsung.com,” then click on Support, or call Samsung customer service centre.
Issues |
Solutions and Explanations |
The TV will not turn on. |
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV. |
|
• Make sure the wall outlet is working. |
|
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If |
|
the TV turns on, refer to “Remote control does not work” below. |
|
|
There is no picture/video. |
• Check cable connections (remove and reconnect all cables connected to the TV and |
|
external devices). |
|
• Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match |
|
the connections to the TV input. For example, if an external device’s output is HDMI, it |
|
should be connected to an HDMI input on the TV. |
|
• Make sure your connected devices are powered on. |
|
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote |
|
control. |
|
• Reboot the connected device by reconnecting the device’s power cable. |
|
|
The remote control does not work. |
• Replace the remote control batteries with the poles (+/–) in the right direction. |
|
• Clean the sensor’s transmission window on the remote. |
|
• Try pointing the remote directly at the TV from 5~6 feet away. |
|
|
The cable/set top box remote control |
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set |
doesn’t turn the TV on or off, or |
user manual for the SAMSUNG TV code. |
adjust the volume. |
|
|
|
You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com -> Support -> Downloads) by USB.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Licence
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.
My Downloads
Allows you to play music files, pictures, and movies saved on a USB device.
Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.
English - 15
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.
You may need additional material such as an anchor depending on the type of wall.
Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.
Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
Screw Specifications
xx For a 19 Inch LED TV: M4 |
|
Wall |
|
||
3. Connect the clamps fixed onto the TV and the clamps fixed onto |
|
|
|
|
|
the wall with a strong string and then tie the string tightly. |
|
|
NOTE |
|
|
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
xx Untie the string before moving the TV.
4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.
Storage and Maintenance
If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small amount of water.
English - 16
|
Specifications |
|
|
Display Resolution |
1360 X 768 |
|
|
Environmental Considerations |
|
Operating Temperature |
10°C to 40°C (50°F to 104°F) |
Operating Humidity |
10% to 80%, non-condensing |
Storage Temperature |
-20°C to 45°C (-4°F to 113°F) |
Storage Humidity |
5% to 95%, non-condensing |
|
|
TV System |
Analogue: B/G, D/K, L, I (Depending on your country selection) |
|
Digital: DVB-T/DVB-C |
|
|
Colour/Video System |
Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 |
|
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 |
|
|
Sound System |
BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC |
|
|
HDMI IN |
Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p |
|
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. |
|
|
Model Name |
UE19D4000 / UE19D4010 / UE19D4020 |
|
|
Screen Size |
19 inches |
|
|
Sound |
|
(Output) |
3 W X 2 |
|
|
Dimensions (WxDxH) |
|
Body |
455.4 X 29.9 X 285.6 (mm) |
With stand |
455.4 X 144.8 X 339.5 (mm) |
|
|
Weight |
|
Without Stand |
3.1 kg |
With Stand |
3.4 kg |
|
|
Design and specifications are subject to change without prior notice.
For information about power supply, and more about power consumption, refer to the label attached to the product.
English - 17
Weitere Informationen zur Verwendung des e-Manuals (S. 12)
Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen Aussehen des Geräts abweichen. Änderungen an Ausführung und technischen Daten vorbehalten.
Wichtige Garantieinformationen zum Bildschirmformat des Fernsehers
1.Die Funktionalitäten für Digitalfernsehen (DVB) stehen nur in Ländern/Regionen zur Verfügung, in denen digitale terrestrische DVB-T-Signale (MPEG2 und MPEG4 AVC) gesendet werden oder in denen Sie Zugang zu einem kompatiblen Kabelfernsehdienst mit DVB-C (MPEG2 und MPEG4 AAC) haben können. Fragen Sie Ihren örtlichen Händler, wenn Sie Informationen über die Verfügbarkeit von DVB-T oder DVB-C in Ihrer Gegend benötigen.
2.DVB-T ist der Standard des europäischen DVB-Konsortiums für die terrestrische Versorgung mit digitalem terrestrischem Fernsehen, und DVB-C ist das Konsortium für die Versorgung mit digitalem Kabelfernsehen. Allerdings werden manche Unterscheidungsmerkmale wie EPG (elektrische
Programmzeitschrift), VOD (Video on Demand) usw. in dieser Spezifikation nicht berücksichtigt. Deshalb können sie zum jetzigen Zeitpunkt noch nicht eingesetzt werden.
3.Zwar hält dieses Fernsehgerät die aktuellen Standards der DVB-T- und DVB-C-Spezifikationen [Version August 2008] ein, aber es kann nicht garantiert werden, dass die Kompatibilität mit zukünftigen digitalen terrestrischen DVB-T und DBV-C-Signalen gewahrt bleibt.
4.In Abhängigkeit von den Ländern/Regionen, in denen dieses Fernsehgerät eingesetzt wird, verlangen manche Kabelfernsehanbieter zusätzliche Gebühren für solch einen Dienst, und möglicherweise wird verlangt, dass Sie den Vertragsbedingungen des Unternehmens zustimmen.
5.Manche Digitalfernsehfunktionen sind in einigen Ländern oder Regionen möglicherweise nicht verfügbar, und DVB-C-Signale kann das Gerät bei manchen Kabelfernsehanbietern möglicherweise nicht fehlerfrei verarbeiten.
6.Für weitere Informationen setzen Sie sich bitte mit dem Samsung-Kundendienstzentrum in Verbindung.
Die Empfangsqualität des Fernsehgeräts kann durch Unterschiede bei den Sendeverfahren in verschiedenen Ländern beeinträchtigt werden. Kontrollieren Sie die Leistung des Fernsehgeräts bei Ihrem örtlichen SAMSUNG-Händler oder wenden Sie sich an das Samsung-Callcenter um festzustellen, ob sich die Empfangsqualität durch Ändern der Fernseheinstellungen verbessern lässt.
Warnung bei Standbildern
Vermeiden Sie die Anzeige von Standbildern (wie z. B. JPEG-Bilddateien) oder Standbildelementen (wie z. B. Senderlogos, Panoramaoder 4:3-Bilder, Aktienoder Laufschriften mit Nachrichten am unteren Bildschirmrand usw.) auf dem Bildschirm. Durch lang anhaltende Anzeige von Standbildern kann es zu Schattenbildern auf dem LED-Bildschirm kommen, wodurch die Bildqualität beeinträchtigt wird. Um die Gefahr dieses Effekts zu vermindern, befolgen Sie bitte die nachfolgenden Empfehlungen:
•Vermeiden Sie es, für lange Zeit denselben Fernsehsender anzuzeigen.
•Versuchen Sie, Abbildungen immer als Vollbild anzuzeigen. Verwenden Sie das Bildformatmenü des Fernsehgeräts, um die beste Anzeigemöglichkeit zu finden.
•Reduzieren Sie die Helligkeitsund Kontrastwerte soweit wie möglich, um immer noch die gewünschte Bildqualität zu erreichen. Zu hohe Werte können das Ausbrennen beschleunigen.
•Verwenden Sie regelmäßig alle Funktionen Ihres Fernsehgeräts, die dazu dienen, das Einbrennen von Bildern und das Ausbrennen des Bildschirms zu reduzieren. Weitere Informationen hierzu finden Sie in den entsprechenden Abschnitten des Benutzerhandbuchs.
Absichern des Aufstellbereichs
Halten Sie die erforderlichen Abstände zwischen dem Gerät und anderen Objekten (z.B. Wänden) ein, um eine ausreichende Lüftung sicherzustellen.
Wenn Sie dies nicht tun, besteht die Gefahr, dass aufgrund eines Anstiegs der Temperatur im Innern des Geräts ein Brand ausbricht oder andere Probleme mit dem Gerät auftreten.
Wenn Sie einen Standfuß oder eine Wandhalterung einsetzen, verwenden Sie ausschließlich Teile von Samsung Electronics.
• Wenn Sie Teile eines anderen Herstellers verwenden, kann es zu Problemen mit dem Gerät oder zu Verletzungen kommen, weil das Gerät herunterfällt.Das Aussehen kann sich je nach Gerät unterscheiden.
Gehen Sie beim Anschließen des Fernsehgeräts vorsichtig vor, da einige Teile warm werden können.
Aufstellen des Geräts mit dem Standfuß |
Installation des Geräts mit der Wandhalterung |
10 cm
10 cm |
10 cm |
|
10 cm |
10 cm |
10 cm |
|
10 cm |
Ordnungsgemäße Entsorgung dieses Geräts (Elektround Elektronik-Altgeräte)
(Anwendbar in der Europäischen Union und anderen europäischen Staaten mit Systemen zur getrennten Sammlung von Wertstoffen)
Diese Kennzeichnung auf dem Gerät, dem Zubehör oder der Dokumentation bedeutet, dass das Gerät sowie das elektronische Zubehör (z. B. Ladegerät, Headset, USB-Kabel) am Ende ihrer Lebensdauer nicht im normalen Hausmüll entsorgt werden dürfen. Entsorgen Sie diese Geräte bitte getrennt von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu schaden. Recyceln Sie das Gerät, um die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer sollten den Händler, bei dem das Produkt gekauft wurde, oder die zuständigen Behörden kontaktieren, um in Erfahrung zu bringen, wie sie das Gerät auf umweltfreundliche Weise recyceln können. Gewerbliche Benutzer wenden sich an ihren Lieferanten und überprüfen die Konditionen Ihres Kaufvertrags. Dieses Gerät und seine elektronischen Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden.
Ordnungsgemäße Entsorgung der Batterien dieses Produkts
(Anzuwenden in den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem für Batterien)
Diese Kennzeichnung auf der Batterie, dem Handbuch oder der Verpackung bedeutet, dass die Batterie am Ende ihrer Lebensdauer nicht im normalen Hausmüll entsorgt werden darf. Die Kennzeichnung mit den chemischen Symbolen für Hg, Cd oder Pb bedeutet, dass die Batterie Quecksilber, Cadmium oder Blei in Mengen enthält, die die Grenzwerte der EU-Direktive 2006/66 übersteigen. Wenn Batterien nicht ordnungsgemäß entsorgt werden, können diese Substanzen die Gesundheit von Menschen oder die Umwelt gefährden. Zum Schutz der natürlichen Ressourcen und zur Förderung der Wiederverwertung von Materialien trennen Sie die Batterien von anderem Müll und führen Sie sie Ihrem örtlichen Recyclingsystem zu.
Deutsch - 2
Zubehör
Vergewissern Sie sich, dass im Lieferumfang des Fernsehgeräts folgende Komponenten enthalten sind. Falls irgendwelche Teile fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung.
Die Farbe und die Form der Teile können sich je nach Modell unterscheiden. Kabel, die nicht zum Paketinhalt gehören, können gesondert erworben werden.
ACHTUNG: STELLEN SIE DIE VERBINDUNG DAUERHAFT HER, DAMIT DAS NETZTEIL NICHT VOM GERÄT GETRENNT WERDEN KANN
yy Fernbedienung und 2 Batterien (Typ AAA) |
yy |
Netzkabel |
|||||||
yy |
Bedienungsanleitung |
||||||||
yy |
Reinigungstuch |
||||||||
yy |
Garantiekarte / Sicherheitshinweise (nicht überall verfügbar) |
||||||||
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
yy Komponenten-/AV-Adapter |
yy Scart-Adapter |
yy CI-Kartenadapter |
Verwaltungskosten werden abgerechnet, wenn:
(a)auf Ihren Wunsch ein Techniker gerufen wird und kein Defekt des Geräts vorliegt (d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben).
(b)Sie das Gerät in eine Reparaturwerkstatt bringen und kein Defekt des Geräts vorliegt (d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben).
Der abgerechnete Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder Kundenbesuche ausgeführt werden.
Deutsch - 3
Bedienfeld
Form und Farbe des Geräts können sich je nach Modell unterscheiden.
Lautsprecher
Fernbedienungssensor
Netzanzeige
SOURCEE
MENU
Y
z
P(Netz)
Standby-Modus
Systemsteuerung
Richten Sie die Fernbedienung auf diesen Sensor am Fernsehgerät.
Beim Einschalten des Fernsehgeräts blinkt die Netzleuchte kurz und erlischt anschließend. Im Standby-Modus leuchtet die Anzeige permanent.
Umschalten zwischen allen verfügbaren Signalquellen. Im Bildschirmmenü können Sie diese Schaltfläche genauso wie die ENTERE-Taste auf der Fernbedienung verwenden.
Drücken Sie diese Taste, um die Funktionen des Fernsehgeräts in einem Bildschirmmenü anzuzeigen.
Einstellen der Lautstärke. Im Bildschirmmenü können Sie die Y-Schaltflächen wie die Tasten ◄ und ► auf der Fernbedienung verwenden.
Wechseln des Senders. Im Bildschirmmenü können Sie die z-Schaltflächen wie die Tasten ▼ und ▲ auf der Fernbedienung verwenden.
Einoder Ausschalten des Fernsehgeräts.
Der Standby-Modus ist nicht für längere Phasen der Abwesenheit gedacht (z. B. wenn Sie verreist sind). Eine kleine Menge Strom wird auch dann noch verbraucht, wenn das Gerät mit dem Netzschalter ausgeschaltet wurde. Es ist am besten, das Netzkabel aus der Steckdose zu ziehen.
Deutsch - 4
Fernbedienung
Dies ist eine spezielle Fernbedienung für Personen mit eingeschränktem Sehvermögen. Die Netztaste sowie die Tasten zum Einstellen des Senders und der Lautstärke sind in Braille beschriftet.
Einund Ausschalten des
Fernsehgeräts.
Hiermit wechseln Sie direkt zu einem Kanal.
Alternativ wählen Sie „Videotext ein“, „Doppel“, „Mix“ oder „Aus“
Einstellen der Lautstärke.
Anzeigen des Bildschirmmenüs.
Anzeigen von Eigene Inhalte, Fernsehen und Quelle.
Hiermit können Sie häufig verwendete Funktionen schnell auswählen.
Auswählen von Optionen im Bildschirmmenü und Ändern von Menüwerten.
Zurück zum vorherigen Menü.
Tasten, die in den Menüs Senderliste,
Kanal-Manager, Eigene Inhalte usw.
Verwenden Sie diese Tasten innerhalb einer bestimmten Funktion.
Einzelheiten entnehmen Sie dem e-Manual.
Anzeigen und Auswählen der verfügbaren
Videosignalquellen.
HDMI 
Hiermit aktivieren Sie den HDMI-Modus direkt.
|
Zurück zum vorherigen Sender. |
|
Drücken Sie diese Taste, um den Ton |
|
vorübergehend auszuschalten. |
|
Wechseln des Senders. |
|
Anzeigen der Senderlisten auf dem Bildschirm. |
CONTENT |
Anzeigen des elektronischen |
|
Programmführers. |
|
Anzeigen von Informationen auf dem |
|
Bildschirm |
|
Schließen des Menüs. |
A B C D
P.MODE |
SRS |
DUALI-II |
E-MANUAL AD/SUBT.
P.MODE: Hiermit wählen Sie einen Bildmodus.
SRS: Hiermit aktivieren Sie SRS TruSurround HD.
DUAL I-II: Hiermit wählen Sie den Tonmodus „DuaL“.
E-MANUAL: Anzeigen des e-Manuals. P.SIZE: Hiermit wählen Sie das Bildformat. AD: Auswahl der Audio-Beschreibung.
(Nicht überall verfügbar) SUBT.: Anzeigen digitaler Untertitel.
Einlegen von Batterien (Batteriegröße: AAA)
Batterien und Akkus gehören nicht in den Hausmüll. Als Verbraucher sind Sie verpflichtet, alte Batterien und Akkus zur umweltschonenden Entsorgung zurückzugeben. Sie können alte Batterien und Akkus bei den öffentlichen Sammelstellen in Ihrer Gemeinde oder überall dort abgeben, wo Batterien und Akkus der betreffenden Art verkauft werden.
Deutsch - 5
Loading...