Samsung UBD-M9700 User Manual

FULL MANUAL

UBD-M9700

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at www.samsung.com/register

Safety Information

Warning

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE

PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required.

AC voltage : Rated voltage marked with this symbol is AC voltage.

DC voltage : Rated voltage marked with this symbol is DC voltage.

Caution. Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from over heating, these slots and openings must never be blocked or covered.

- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

- Do not place vessels (vases etc.) containing water on this apparatus. A water spill can cause a fire or electric shock.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized Samsung dealer or service center immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.

• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

2 English

• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized Samsung dealer or service center.

• Maintenance of Cabinet.

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

• Contact an authorized service center for information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to your product.

• Use only a properly grounded plug and wall outlet.

- An improper ground may cause electric shock or equipment damage. (Class 1 Equipment only)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location

safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• Do not dispose of batteries in a fire.

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• WARNING

- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

01 Safety Information

3 English

Safety Information

FCC NOTE (for U.S.A)

Class B FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorienting or relocating the receiving antenna.

• Increasing the separation between the

equipment and receiver.

• Connecting the equipment to an outlet that is on a different circuit than the radio or TV.

• Consulting the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement :

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC Caution :

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

CLASS 1 LASER product

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Complies with 21CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN THE COVER. DO NOT REPAIR THE PRODUCT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

| NOTE |

\If the Region number of an Ultra HD Blu-ray

Disc/Blu-ray Disc/DVD does not correspond to the Region number of this product, the product cannot play the disc.

4 English

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

01 Safety Information

5 English

Contents

SAFETY INFORMATION

2 Warning

5 Precautions

5 Important Safety Instructions

GETTING STARTED

8 Accessories

9 Front and Right Side Panel

10 Rear Panel

11 Remote Control

11 Tour of the Remote Control

CONNECTIONS

13 Connecting to a TV

15 Connecting to an Audio Device

15 Method 1 Connecting to an HDMI (HDR)

compatible Soundbar / AV receiver that supports pass through

15 Method 2 Connecting to Bluetooth

headphones via Bluetooth

16 Method 3 Connecting to an HDMI

compatible Soundbar / AV receiver that does not support pass through

16 Method 4 Connecting to a Soundbar /

AV receiver with a Digital Optical Cable

17 Connecting to a Mobile Device

17 Method 1 Connecting to Mobile Device via

Bluetooth

17 Method 2 Connecting to Mobile Device via

Wi-Fi (Smart View)

18 Method 3 Connecting to Mobile Device via

Wi-Fi (Blu-ray to Mobile)

18 Connecting to a Network Router

18 Wireless Network

19 Wired Network

SETTINGS

20 The Initial Settings Procedure

20 The Home Screen

21 Accessing the Settings Screen

21 Buttons on the Remote Control Used for

the Settings Menu

22 Settings Menu Functions

22 Picture

22 Sound

23 General

25 Support

26 Networks and the Internet

26 Configuring Your Network Connection

29 Upgrading Software

30 Update Now

30 Auto Update

6 English

MEDIA PLAY

NETWORK SERVICES

31 Playing Commercial Discs

31 Disc Storage & Management

31 Playing Photos, Videos, and Music

(Multimedia)

31 Playing Media Content Saved on a USB

Device

32 Playing Media Content Saved in a

Computer

32 Playing a Disc with User Recorded Content

33 Controlling Video Playback

33 Buttons on the Remote Control used for

Video Playback

34 Using the On-screen Menu during

Playback of a Video

36 Using the Sort By & Options Menus

36 Controlling Music Playback

36 Buttons on the Remote Control used for

Music Playback

37 Using the Options Menu During Playback

37 Using the Sort By & Options Menus on a

File Screen

37 Repeating Tracks on an Audio CD

37 Shuffling Tracks on an Audio CD

37 Creating a Playlist from an Audio CD

38 Playing Photo Contents

38 Using the On-screen Menu during

Playback of a Photo File

39 Using the Sort By & Options Menus

40 Creating a Samsung Account

41 Before Using Apps

41 Using Apps

41 The Apps Screen at a Glance

42 Starting an Application

43 Using the Internet

44 The Web Browser window at a Glance

46 Using the Browser Menu

47 Linking Your Internet Service Accounts to

the Product

47 BD-LIVE™

APPENDIX

48 Additional Information

48 Notes

50 Resolution according to the contents type

51 Digital Output Selection

52 Troubleshooting

55 Disc and Format Compatibility

55 Disc types and contents your product can

play

55 Disc types your product cannot play

56 Region Code

56 Logos of Discs the product can play

57 Supported Formats

61 Compliance and Compatibility Notice

62 Copy Protection

62 Network Service Disclaimer

63 Licenses

64 Specifications

Contents

7 English

Getting Started

Accessories

Check for the supplied accessories shown below.

Batteries (AA Size)

(4301-000101)

Power Cable

(3903-001117)

DISC

POP UP

123

/MENU

TOOLS

User Manual

(AK68-02649K)

Remote Control (AK59-00180A)

8 English

Front and Right Side Panel

POWER BUTTON

OPEN/CLOSE BUTTON

POWER INDICATOR

Red: Power off

Green: Power on

Green blinking: Remote control or Front Key

input, Software update.

DISPLAY

DISC TRAY

REMOTE CONTROL

SENSOR

Wi-Fi/BT ANTENNA

Do not place any object near or in front of the

antenna to ensure proper operation.

02 Getting Started

POWER

Right Side

USB

5V 0.5A

USB HOST

Ensure there is sufficient space around the right side of the main unit so you can connect a USB device.

| NOTES |

\To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.

\When the product displays an Ultra HD Blu-ray or standard Blu-ray Disc's menu, you cannot start the

movie by pressing the p button on the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the (OK) button on the remote control.

9 English

Getting Started

Rear Panel

POWER

OPTICAL

DIGITAL

AUDIO OUT

EX-LINK

*EX-LINK

LAN HDMI OUT

MAIN

SUB

( )

(Audio Only)

OPTICAL

DIGITAL

AUDIO OUT

EX-LINK

AUDIO OUT

SUB

(Audio Only)

LAN HDMI OUT

LANPOWER DIGITAL

HDMI OUT

❶

MAIN : outputs audio and video.

SUB : outputs audio only.

MAIN

( )

| NOTE |

\To use the Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI 1 terminal.

If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available.

* EX-LINK (RS-232) control

Allows RS-232 control devices to remotely access and adjust your Ultra HD Blu-ray player’s system and settings.

| NOTES |

\When using this function, the UART baud rate for the RS-232 Controller Device should be set to 9600

bps.

\Compatibility between an unauthorized controller device and your Ultra HD Blu-ray player cannot be

guaranteed.

\RS-232 Control requires professional installation.

10 English

Remote Control

| NOTE |

\Previous BD-Player remote controls may not be compatible with this player.

Tour of the Remote Control

Turns the TV o n and off.

Turns the playe r on and off.

Press to op en and close the disc tray.

Use to display the number, color or

information keypad on th e screen.

The color buttons are u sed both for menus

on the player and also seve ral Ultra HD

Blu-ray D isc or Blu-ray D isc functions.

(OK) : Use to select menu item s.

Move the cursor up, down, lef t, or right.

(Up/Down/Left/Right) :

Return to the previous me nu.

Display the home screen.

DISC

123

POP UP /MENU

TOOLS

TV volume adjustment.

After setup, allows you to set the input source o n your TV.

Use to enter the disc menu.

Use to enter the Popup menu.

Press to use the Tools menu.

Press to play disc or files. or

Press to pause playing.

Press to se arch backwards or forwards.

Press to sk ip chapters.

02 Getting Started

Press to stop a disc or file.

Inserting Batteries (AA Battery x2)

Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) in the correct +/- polarity configuration. Slide the battery cover back into

position.

11 English

Getting Started

POP UP /MENU

DISC

TOOLS

123

Using Remote Control Buttons to Enter TV Codes

1. Press and hold the (TV Power) button.

2. While holding the

(TV Power) button,

press the buttons on the remote that correspond to a two-digit TV Code from the list below. Use the illustration to the right as a guide. For example: To enter 01, press the TOOLS button and then press the 123 button. Note that some TV brands have more than one 2-digit code. If the first code does not work, try the next.

TV Control Codes

Brand Codes

SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09

AIWA 82

ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18

BANG & OLUFSEN

BLAUPUNKT 71

BRANDT 73

BRIONVEGA 57

CGE 52

CONTINENTAL

EDISON

DAEWOO

EMERSON 64

FERGUSON 73

FINLUX 06, 49, 57

FORMENTI 57

FUJITSU 84

GRADIENTE 70

GRUNDIG 49, 52, 71

HITACHI 60, 72, 73, 75

IMPERIAL 52

JVC 61, 79

19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34

06, 19, 20, 21, 22, 78

Brand Codes

LOEWE 06, 69

LOEWE OPTA

MAGNAVOX

METZ 57

MITSUBISHI

MIVAR 52, 77

NEC

NEWSAN 68

NOBLEX 66

NOKIA 74

NORDMENDE

PANASONIC 13, 53, 54, 74, 75

PHILIPS 06, 56, 57

PHONOLA 72, 73, 75

PIONEER 58, 59, 73, 74

RADIOLA 06, 56

RADIOMARELLI 57

RCA 45, 46

REX 74

SABA 57, 72, 73, 74, 75

SALORA 74

SANYO 41, 42, 43, 44, 48

SCHNEIDER 06

SELECO 74

SHARP 36, 37, 38, 39, 48

SIEMENS 71

SINGER 57

SINUDYNE 57

SONY 35, 48

TELEAVA 73

TELEFUNKEN

THOMSON 72, 73, 75

THOMSON ASIA 80, 81

TOSHIBA

WEGA 57

YOKO 06

ZENITH 63

06, 57

06, 48, 62, 65

72, 73, 75

67, 73, 75, 76

47, 48, 49, 50, 51, 52

12 English

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

OPTICAL

DIGITAL

OPTICAL

MAIN

POWER

SUB

( )

(Audio Only)

DIGITAL AUDIO OUT

LAN HDMI OUT

EX-LINK

AUDIO OUT

LAN

SUB

(Audio Only)

HDMI OUT

MAIN

( )

Audio Video

| NOTES |

\Optimum picture quality is automatically obtained (HDMI UHD Color - On) when the player is

connected to a Samsung UHD TV.

\To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI 1 terminal.

If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available.

- The HDMI 2 terminal does not output a video signal.

\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the

DIGITAL AUDIO OUT on the product to an audio system to hear audio.

\An HDMI to HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual

of your TV.

\When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for

the first time, the product automatically sets the HDMI output resolution to the highest supported by the TV.

\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

\To view video in the HDMI 720p, 1080p, or 2160p output mode, you must use a high speed (category

2) HDMI cable.

03 Connections

13 English

Connections

\HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

\If your TV does not support HDCP (High-bandwidth Digital Content Protection) version 2.2, some Ultra

HD Blu-ray titles may play at the 1080p resolution.

- This action is regulated by the Ultra HD Blu-ray Disc content's copyright protection standard according to the producer's intention to avoid infringing the copyright.

- To view video from a Ultra HD Blu-ray Disc at its original resolution, connect the HDMI cable to an HDMI input port on the TV that supports HDCP 2.2.

- To check whether the TV supports HDCP 2.2, check the HDMI port on the back of the TV or refer to the TV user's manual.

\This product supports the HDR function. (HDR: High Dynamic Range is a technique used to reproduce

a greater dynamic range of luminosity than is possible with conventional imaging devices.)

- To take advantage of the HDR function, you need HDR content, a TV supporting HDR, and a highspeed HDMI cable.

- Connect the player to an HDMI input terminal on the TV that supports the HDR function using the high speed HDMI cable.

- Use the TV's menu to activate the HDR related function. For further information, refer to the TV's user manual.

14 English

Connecting to an Audio Device

You can connect this product to an audio system using the methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI (HDR) compatible Soundbar / AV receiver that supports pass through

• Connect an HDMI cable (not supplied) from the HDMI OUT 1 jack on the back of the product to the HDMI IN jack on your receiver. Connect another HDMI cable from the HDMI OUT jack of your receiver

to the HDMI IN jack of your TV.

- Your receiver must have 4K pass through capability to pass through UHD video content.

MAIN

SUB

HDMI OUT

( )

OPTICAL

MAIN

SUB

POWER

( )

(Audio Only)

DIGITAL AUDIO OUT

LAN HDMI OUT

EX-LINK

(Audio Only)

Audio/Video

Soundbar / AV receiver

Video

| NOTE |

\If AACS 2.0 was applied to the contents that you want to play, the contents may not be displayed on the

screen depending on the AV receiver connected. For more detailed information, refer to the user manual of your AV receiver.

03 Connections

Method 2 Connecting to Bluetooth headphones via Bluetooth

• Connect the main unit to Bluetooth headphones via Bluetooth. Use the main unit to set the sound output to the Bluetooth headphones, and then listen to the sound via the headphones.

| NOTE |

\To use this function, Sound Mirroring should be Off in the Settings menu.

(Default : Off)

Bluetooth Headphone

15 English

Connections

POWER

LAN HDMI OUT

SUB

(Audio Only)

MAIN ( )

OPTICAL

DIGITAL

AUDIO OUT

EX-LINK

HDMI OUT

SUB

(Audio Only)

MAIN

( )

POWER

LAN HDMI OUT

SUB

(Audio Only)

MAIN ( )

OPTICAL

DIGITAL

AUDIO OUT

EX-LINK

LAN

OPTICAL

DIGITAL

AUDIO OUT

EX-LINK

HDMI OUT

SUB

(Audio Only)

MAIN

( )

Method 3 Connecting to an HDMI compatible Soundbar / AV receiver that does not support pass through

• Connect an HDMI cable (not supplied) from the

HDMI OUT 1 jack on the back of the product to the HDMI IN jack on your your TV. Connect another HDMI cable from the HDMI OUT 2 jack on the product to the HDMI IN jack on your receiver.

Video

Audio

Method 4 Connecting to a Soundbar / AV receiver with a Digital Optical Cable

• Using a digital Optical cable (not supplied),

connect the OPTICAL DIGITAL AUDIO OUT jack on the product to the DIGITAL OPTICAL IN jack of the receiver.

• You will hear sound only through the front two

speakers with Digital Output set to PCM.

Audio

Soundbar / AV receiver

| CAUTION |

\Do not connect the HDMI OUT 1 and HDMI

OUT 2 terminals of the product together with

an HDMI cable.

Soundbar / AV receiver

| NOTE |

\If you connect a receiver to the player's OPTICAL

DIGITAL AUDIO OUT port, the receiver’s audio

reproduction may not synchronize with that of the TV.

16 English

Connecting to a Mobile Device

Method 1 Connecting to Mobile Device via Bluetooth

Connect a mobile device to the player via Bluetooth to play music from the mobile device.

Method 2 Connecting to Mobile Device via Wi-Fi (Smart View)

The Smart View function lets you view the screen of your mobile device or Android tablet on a TV that you have connected to the player.

03 Connections

Audio

AV receiver

1. Use an HDMI or optical cable to connect the

player to a receiver or audio device.

| NOTE |

\Music from the mobile device will not be audible

if the cable used to connect the player is not an HDMI or optical cable.

2. On the Home screen, select Settings >

Sound, and then set Sound Mirroring to On. (Default : Off)

3. Find the player's device name. (Navigate to

Settings > General > System Manager > Device Name.)

4. On the mobile device, use the Bluetooth app

to search for the player's device name. Select the player's device name to connect to the player via Bluetooth.

5. When a connection is established, play music

from the mobile device. Music is played via the receiver or audio device connected to the player.

Mobile Device

1. On the Home screen, select Source, and then press the Up button.

2. Select Connection Guide, and then press the (OK) button.

3. Launch Smart View on your mobile device.

4. On your mobile device, find the name of the

player in the list of available devices, and then select it.

5. The TV displays a connecting message (for example, Connecting to Android_92gb...) and then displays the connected message.

6. In a few moments, the screen of your device appears on the TV screen.

7. To stop Smart View, press (Return) on the remote control or exit Smart View.

| NOTES |

\When you are using the Smart View function,

video stuttering or audio dropouts may occur, depending on your environment.

\Bluetooth transmissions can interfere with the

Smart View signal. Before using the Smart View function, we strongly recommend that you turn off the Bluetooth function on your mobile device or smart device (tablet, etc.).

\If your wireless router (Wi-Fi) uses a DFS

channel, you cannot use this function. Contact your Internet service provider for details.

17 English

Connections

Method 3 Connecting to Mobile Device via Wi-Fi (Blu-ray to Mobile)

The Blu-ray to mobile function lets you view the content your player is playing on a mobile device or Android tablet that you have connected to the player.

Mobile Device

1. On the player, get the player's device name. (Navigate to Settings > General > System

Manager > Device Name.)

2. Start Samsung Connect on the mobile device.

In the list that appears, find the player's device name. (You may need to run Scan for Devices.)

3. Select the player's device name. In the drop down list that appears below it, select "TV to mobile device" (or "BD to mobile device").

4. The mobile device displays a connecting message. The TV displays a permission request. Select Allow using the player's remote.

| NOTE |

\After you select Allow the first time, you will not

need to select Allow again unless you cancel permission.

5. In a few moments, the content being played by the player appears on the mobile device's screen.

6. To stop the Blu-ray to mobile function, press

(Return) on the mobile device twice.

| NOTES |

\Samsung Connect can be referred to as

‘Blu-ray to Mobile', depending on the mobile device model. (Supported by Samsung only.)

\If your wireless router (Wi-Fi) uses a DFS

channel, you cannot use this function. Contact your Internet service provider for details.

Connecting to a Network Router

You can connect your product to your network router using one of the methods illustrated below. The connection can be wireless or wired.

Wireless Network

Router

Wall connection

| NOTES |

\If your wireless router supports DHCP, this

product can use a DHCP or static IP address to connect to the wireless network.

\Set your wireless router to Infrastructure mode.

Ad-hoc mode is not supported.

\The product supports only the following

wireless security key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/ AES), WPA2-PSK (TKIP/AES)

\Select a channel on the wireless router that

is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\If you select the Pure High-throughput

(Greenfield) 802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi-Fi certification specifications.

18 English

\Wireless LAN, by its nature, may cause

interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc.).

Wired Network

Router or wall connection

OPTICAL

MAIN

POWER

| NOTES |

\Your router or your Internet Service Provider's

policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\DSL users, please use a router to make a

network connection.

\Use Cat 7 (*STP Type) cable for the connection.

(* Shielded Twisted Pair)

SUB

( )

(Audio Only)

DIGITAL

AUDIO OUT

LAN HDMI OUT

EX-LINK

LAN

03 Connections

19 English

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this product after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

After you have connected the product to your TV, turn on the TV and product. When you turn on the product the first time, the product's Initial Settings screen appears on the TV. The Initial Settings procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), and network configuration, and connect the player to the Internet. Follow the directions on the screen.

| NOTES |

\If you skip Network Setup during the Initial

Settings procedure, you can configure your network settings later. See "Configuring Your Network Connection" on pages 26~29 for instructions.

\If you want to display the Initial Settings screen

again and make changes, select Settings > General > Start Setup in the Home screen or select Settings > Support > Reset. (See page

25)

\If you want to use the Anynet+ (HDMI-CEC)

function, please follow the instructions below.

1) Connect the product to an Anynet+ (HDMI- CEC)-compliant Samsung TV using an HDMI Cable.

2) Set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product.

3) Set the player to the Initial Settings Procedure.

The Home Screen

Disc

1 2 3 4 5

(Functions)

• Settings : Opens the product’s

menu. In the menu, you can set various functions to suit your personal preferences. When you move focus to the Settings menu, the Quick Settings menu appears. Use the menu to customize various options, such as

Picture Mode, Fit Screen Size, Sound Output, Audio Output Format, and

Network.

• Source : Select an inserted disc

or USB storage device, a connected network device, or Smart View.

• Search : Lets you search for content

in Apps and YouTube by entering corresponding search words.

• APPS : Access various for pay or

free-of-charge applications.

Disc : Displays the selected source.

Downloaded Apps : Displays downloaded apps. Apps displayed here can be deleted,

edited, or rearranged, if necessary.

You can access the Internet.

Use the Add to Home option to add frequently used menu items to the bottom

of the Home screen.

Internet InternetApp1 App2 App3

20 English

+ 46 hidden pages