Samsung UAD6400U Schematic

LED-TV

Chassis : U69A

Model : UE**D65**V*
UE**D65**W*

UE**D67**W*

Manual

SERVICE

TFT-LCD TV Contents

1. Precautions

2. Product specications

3. Disassembly and Reassembly

4. Troubleshooting

5. Wiring Diagram

UE**D65** / UE**D67**

Contents

1. Precautions .............................................................................................................. 1-1

1-1. Safety Precautions ......................................................................................................... 1-1

1-2. Servicing Precautions ..................................................................................................... 1-2

1-3. Electrostatically Sensitive Devices (ESD) Precautions .................................................. 1-2

1-4. Installation Precautions .................................................................................................. 1-3

2. Product specications ............................................................................................ 2-1

2-1. Specications Information .............................................................................................. 2-1

2-2. Detail Factory Option .................................................................................................... 2-10

2-3. New Functions Explanation .......................................................................................... 2-12

2-4. Accessories .................................................................................................................. 2-28

3. Disassembly and Reassembly ............................................................................... 3-1

3-1. Disassembly and Reassembly ....................................................................................... 3-1

4. Troubleshooting ...................................................................................................... 4-1

4-1. Troubleshooting .............................................................................................................. 4-1

4-2. Alignments and Adjustments ........................................................................................ 4-27

4-3. Factory Mode Adjustments ........................................................................................... 4-28

4-4. Factory Data ................................................................................................................. 4-29

4-5. White Balance .............................................................................................................. 4-47

4-6. Software Upgrade ......................................................................................................... 4-49

4-7. Sub Micom Upgrade ..................................................................................................... 4-50

4-8. RS-232C ....................................................................................................................... 4-51

4-9. AV control code ............................................................................................................. 4-52

5. Wiring Diagram ........................................................................................................ 5-1

5-1. Wiring Diagram ............................................................................................................... 5-1

5-2. Connector ....................................................................................................................... 5-3

5-3. Connector Functions ...................................................................................................... 5-5

5-4. Cables ............................................................................................................................ 5-5

5-5. Types of module ............................................................................................................. 5-5

1. Precautions

1. Precautions

1-1. Safety Precautions

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.

1-1-1. Warnings

For continued safety, do not attempt to modify the circuit board.1.

Disconnect the AC power and DC power jack before servicing.2.

1-1-2. Servicing the LED TV

When servicing the LED TV, Disconnect the AC line cord from the AC outlet.1.

It is essential that service technicians have an accurate voltage meter available at all times. 2.
Check the calibration of this meter periodically.

1-1-3. Fire and Shock Hazard

Before returning the LED TV to the user, perform the following safety checks:

Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the 1.
chassis and other metal parts in the LED TV.

Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and 2.
compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.

Leakage Current Hot Check (Figure 1-1): 3.
WARNING : Do not use an isolation transformer during this test.
Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI
C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

(READING SHOULD)
NOT BE ABOVE 0.5mA

DEVICE
UNDER
TEST

2-WIRE CORD

*ALSO TEST WITH

PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)

TEST ALL

EXPOSED METAL

SURFACES

LEAKAGE
CURRENT
TESTER

EARTH

GROUND

Figure 1-1. Leakage Current Test Circuit

With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch 4.

rst in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit,

etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.

1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual
inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,

wattage, etc. Parts that have special safety characteristics are identied by

replacement that does not have the same safety characteristics as the recommended replacement part might create

shock, re and/or other hazards. Product safety is under review continuously and new instructions are issued whenever

appropriate.

on schematics and parts lists. A substitute

1-1

1-2

1. Precautions

1-2. Servicing Precautions

WARNING: An electrolytic capacitor installed with the wrong polarity might explode.
Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of

this manual.

Note: If unforeseen circumstances create conict between the following servicing precautions and any of the

safety precautions, always follow the safety precautions.

1-2-1 General Servicing Precautions

Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before 1.
attempting to:
(a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test
component in parallel with an electrolytic capacitor.

Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes 2.
used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such
elements to their original position.

After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that 3.
the area around the serviced part has not been damaged.

Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, 4.
input terminals and earphone jacks).

Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. 5.
Connect an insulation resistance meter (500 V) to theblades of the AC plug.
The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be
greater than 1 megohm.

Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; 6.
always remove the instrument’s ground lead last.

1-3. Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly

called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect

transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your 1.
body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard,
be sure to remove the wrist strap before applying power to the LED TV.

After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent 2.
accumulation of an electrostatic charge.

Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.3.

Use only a grounded-tip soldering iron to solder or desolder ESDs.4.

Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate 5.
electrical charges sufcient to damage ESDs.

Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs 6.

are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive
materials.

Immediately before removing the protective material from the leads of a replacement ESD, touch the protective 7.
material to the chassis or circuit assembly into which the device will be installed.
Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.

Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, 8.
or lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.

1-3

1. Precautions

1-4. Installation Precautions

For safety reasons, more than a people are required for carrying the product.1.

Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.2.

Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal 3.

temperature may cause re.

Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed 4.

to moisture. Otherwise, it may cause a re or electric shock.

Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check 5.
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric

shock.

Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the 6.
antenna falling over may cause re or electric shock.

When installing the product, leave enough space (0.4m) between the product and the wall for ventilation purposes. 7.

A rise in temperature within the product may cause re.

2. Product specications

2-1. Specications Information

2-1-1. Model Comparison

Model UD650* UD653* UD657*

Front view All

All

Detail view

All

2. Product specications

Front Color All Tint Blue + Charcoal Black Clear + Charcoal Black Clear + Charcoal Black

Without Stnand 745.8 x 29.9 x 443.4 736.3 x 29.9 x 434.2 736.3 x 29.9 x 434.2

32"

With Stand 745.8 x 240 x 503.8 736.3 x 240 x 498.9 736.3 x 240 x 498.9

Without Stnand 867.7 x 29.9 x 512.3 858.3 x 29.9 x 503.2 858.3 x 29.9 x 503.2

37"

With Stand 867.7 x 255 x 571.6 858.3 x 255 x 557.1 858.3 x 255 x 557.1

Without Stnand 933 x 29.9 x 548.8 923.5 x 29.9 x 539.6 923.5 x 29.9 x 539.6

Dimensions

W x D x H

(mm)

Weight

(kg)

Panel Type All Super-Clear Super-Clear Super-Clear

Internal Memory All 128 Mbtye 128 Mbtye 128 Mbtye

DDR All 768 Mbtye 768 Mbtye 768 Mbtye

Feature All

40"

With Stand 933 x 255 x 608.2 923.5 x 255 x 603.5 923.5 x 255 x 603.5

Without Stnand 1068.4 x 29.9 x 625.2 1058.9 x 29.9 x 616 1058.9 x 29.9 x 616

46"

With Stand 1068.4 x 275 x 683.6 1058.9 x 275 x 679.9 1058.9 x 275 x 679.9

Without Stnand 1258.8 x 29.9 x 731.7 1247.7 x 29.9 x 722.6 1247.7 x 29.9 x 722.6

55"

With Stand 1258.8 x 275 x 791.4 1247.7 x 275 x 805.4 1247.7 x 275 x 805.4

Without Stnand 1379.0 x 30.4 x 799.4

60"

With Stand 1379.0 x 335.0 x 860.3

Without Stnand 7.06 7.03 7.03

32"

With Stand 8.84 8.81 8.81

Without Stnand 9.13 9.01 9.01

37"

With Stand 11.65 11.53 11.53

Without Stnand 9.98 9.9 9.9

40"

With Stand 12.5 12.42 12.42

Without Stnand 12.7 12.56 12.56

46"

With Stand 16.94 16.8 16.8

Without Stnand 17.3 17.15 17.15

55"

With Stand 21.98 21.83 21.83

Without Stnand 23.5

60"

With Stand 29.1

Media Play(USB/DLNA)

Wi-Fi(Built-in), 3D, SMART HUB

Media Play(USB/DLNA)

Wi-Fi(Built-in), 3D, SMART HUB

Media Play(USB/DLNA)

Wi-Fi(Built-in), 3D, SMART HUB

2-1

2-2

2. Product specications

Model UD651* UD654* UD67**

Front view All

All

Detail view

All

Front Color All Clear + white Clear + Charcoal Balck Clear + Charcoal Black

Without Stnand 736.3 x 29.9 x 434.2 742.2 x 29.9 x 439.8 736.3 x 29.9 x 434.2

32"

With Stand 736.3 x 241.3 x 513.1 742.2 x 240 x 501.9 736.3 x 241.3 x 513.1

Without Stnand 858.3 x 29.9 x 503.2 864.3 x 29.9 x 508.9 858.3 x 29.9 x 503.2

37"

With Stand 858.3 x 241.3 x 581 864.3 x 255 x 570.1 858.3 x 241.3 x 581

Dimensions

W x D x H

(mm)

Weight

(kg)

Panel Type All Super-Clear Super-Clear Super-Clear

Internal

Memory

DDR All 768 Mbtye 768 Mbtye 768 Mbtye

Feature All

Without Stnand 923.5 x 29.9 x 539.6 929.5 x 29.9 x 545.3 923.5 x 29.9 x 539.6

40"

With Stand 923.5 x 241.3 x 617.4 929.5 x 255 x 606.4 923.5 x 241.3 x 617.4

Without Stnand 1058.9 x 29.9 x 616 1064.9 x 29.9 x 621.7 1058.9 x 29.9 x 616

46"

With Stand 1058.9 x 276.6 x 698.8 1064.9 x 275 x 682.8 1058.9 x 276.6 x 698.8

Without Stnand 1247.7 x 29.9 x 722.6

55"

With Stand 1247.7 x 309.5 x 824.4

Without Stnand 7.03 7.03 7.03

32"

With Stand 8.23 8.81 8.23

Without Stnand 9.01 9.09 9.01

37"

With Stand 10.41 11.61 10.41

Without Stnand 9.9 9.91 9.9

40"

With Stand 11.3 12.43 11.3

Without Stnand 12.56 12 12.56

46"

With Stand 14.46 16.24 14.46

Without Stnand 17.15

55"

With Stand 19.65

All 128 Mbtye 128 Mbtye 128 Mbtye

Media Play(USB/DLNA)

Wi-Fi(Built-in), 3D, SMART HUB

Media Play(USB/DLNA)

Wi-Fi(Built-in), 3D, SMART HUB

Media Play(USB/DLNA)

Wi-Fi(Built-in), 3D, SMART HUB

2-3

2. Product specications

2-1-2. Feature & Specications

Model UE32D65** / UE32D67**

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 1-A/V, 3-USB2.0(Media Play), D-SUB , LAN, 1-Scart ሪ
Respons time : 6.5 ms ሪ
Dynamic contrast , Super-PVA ሪ
PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ
Dolby Digital+, SRS theater ሪ

Specications

Item Description

LCD Panel

Scanning Frequency

Display Colors

Maximum resolution

Input Signal

Input Sync Signal

Maximum Pixel Clock rate

Active Display (Horizontal/Vertical)

AC power voltage & Frequency

Power Consumption

Dimensions Set

(W x D x H)

Weight (Set)

TV System

Environmental Considerations

Audio spec.

Note: 3D, Media Bridge, AllShare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

32 inch HD 120Hz

Horizontal : 135.6 KHz(TYP) I Vertical : 120 Hz(TYP)

1.07G Colors

Horizontal : 1920 Pixels I Vertical : 1080 Pixels

Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

H/V Separate, TTL, P. or N.

80 MHz

698.4 (H) x 392.85(V) mm

AC 220-240 V 50/60 Hz

100 W (Under 0.1 W, Stand by)

6500

6510

6530

6540

6570

6750

6500 8.84 kg_with stand / 7.06 kg_without stand

6510 8.22 kg_with stand / 7.03 kg_without stand

6530 8.8 kg_with stand / 7.03 kg_without stand

6540 8.81 kg_with stand / 7.03 kg_without stand

6570 8.8 kg_with stand / 7.03 kg_without stand

6750 8.22 kg_with stand / 7.03 kg_without stand

Tuning Frequency Synthesize

System DVB-T/C/S/S2 (UK and 6**7_nordic : T/T2/C), PAL, SECAM, NT4.43

Sound BK , DK , NICAM , MPEG1

Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing

- MAX Internal speaker Out : Right/Left(10 W)

- BASS Control Range : -10dB ~ +10dB

- TREBLE Control Range : -10dB ~ +10dB

- Output Frequency : RF : 20 Hz ~ 15.4 kHz

745.8 (W) x 240 (D) x 503.8 (H) mm_with stand

745.8 (W) x 29.9 (D) x 443.4 (H) mm_without stand

736.3 (W) x 241.3 (D) x 513.1 (H) mm_with stand

736.3 (W) x 29.9 (D) x 434.2 (H) mm_without stand

736.3 (W) x 240 (D) x 498.9 (H) mm_with stand

736.3 (W) x 29.9 (D) x 434.2 (H) mm_without stand

742.2 (W) x 240 (D) x 501.9 (H) mm_with stand

742.2 (W) x 29.9 (D) x 570.1 (H) mm_without stand

736.3 (W) x 240 (D) x 498.9 (H) mm_with stand

736.3 (W) x 29.9 (D) x 434.2 (H) mm_without stand

736.3 (W) x 241.3 (D) x 513.1 (H) mm_with stand

736.3 (W) x 29.9 (D) x 434.2 (H) mm_without stand

AV/Componet / HDMI : 20 Hz ~ 20 kHz

2-4

2. Product specications

Model UE37D65** / UE37D67**

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 1-A/V, 3-USB2.0(Media Play), D-SUB , LAN, 1-Scart ሪ
Respons time : 6.5 ms ሪ
Dynamic contrast , Super-PVA ሪ
PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ
Dolby Digital+, SRS theater ሪ

Specications

Item Description

LCD Panel

Scanning Frequency

Display Colors

Maximum resolution

Input Signal

Input Sync Signal

Maximum Pixel Clock rate

Active Display (Horizontal/Vertical)

AC power voltage & Frequency

Power Consumption

Dimensions Set

(W x D x H)

Weight (Set)

TV System

Environmental Considerations

Audio spec.

37 inch HD 120Hz

Horizontal : 135.6 KHz(TYP) I Vertical : 120 Hz(TYP)

1.07G Colors

Horizontal : 1920 Pixels I Vertical : 1080 Pixels

Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

H/V Separate, TTL, P. or N.

80 MHz

819.36(H) x 460.89(V) mm

AC 220-240 V 50/60 Hz

110 W (Under 0.1 W, Stand by)

6500

6510

6530

6540

6570

6750

6500 11.65 kg_with stand / 9.13 kg_without stand

6510 10.47 kg_with stand / 9.07 kg_without stand

6530 11.59 kg_with stand / 9.07 kg_without stand

6540 11.61 kg_with stand / 9.09 kg_without stand

6570 11.59 kg_with stand / 9.07 kg_without stand

6750 10.47 kg_with stand / 9.07 kg_without stand

Tuning Frequency Synthesize

System DVB-T/C/S/S2 (UK and 6**7_nordic : T/T2/C), PAL, SECAM, NT4.43

Sound BK , DK , NICAM , MPEG1

Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing

- MAX Internal speaker Out : Right/Left(10 W)

- BASS Control Range : -10dB ~ +10dB

- TREBLE Control Range : -10dB ~ +10dB

- Output Frequency : RF : 20 Hz ~ 15.4 kHz

867.7 (W) x 255 (D) x 571.6 (H) mm_with stand

867.7 (W) x 29.9 (D) x 512.3 (H) mm_without sta

858.3 (W) x 241.3 (D) x 581 (H) mm_with stand

858.3 (W) x 29.9 (D) x 503.2 (H) mm_without stand

858.3 (W) x 255 (D) x 557.1 (H) mm_with stand

858.3 (W) x 29.9 (D) x 503.2 (H) mm_without stand

864.3 (W) x 255 (D) x 570.1 (H) mm_with stand

864.3 (W) x 29.9 (D) x 508.9 (H) mm_without stand

858.3 (W) x 255 (D) x 557.1 (H) mm_with stand

858.3 (W) x 29.9 (D) x 503.2 (H) mm_without stand

858.3 (W) x 241.3 (D) x 581 (H) mm_with stand

858.3 (W) x 29.9 (D) x 503.2 (H) mm_without stand

AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: 3D, Media Bridge, AllShare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-5

2. Product specications

Model UE40D65** / UE40D67**

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 1-A/V, 3-USB2.0(Media Play), D-SUB , LAN, 1-Scart ሪ
Respons time : 6.5 ms ሪ
Dynamic contrast , Super-PVA ሪ
PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ
Dolby Digital+, SRS theater ሪ

Specications

Item Description

LCD Panel

Scanning Frequency

Display Colors

Maximum resolution

Input Signal

Input Sync Signal

Maximum Pixel Clock rate

Active Display (Horizontal/Vertical)

AC power voltage & Frequency

Power Consumption

Dimensions Set

(W x D x H)

Weight (Set)

TV System

Environmental Considerations

Audio spec.

40 inch HD 120Hz

Horizontal : 135.6 KHz(TYP) I Vertical : 120 Hz(TYP)

1.07G Colors

Horizontal : 1920 Pixels I Vertical : 1080 Pixels

Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

H/V Separate, TTL, P. or N.

80 MHz

885.6 (H) x 498.15 (V) mm

AC 220-240 V 50/60 Hz

130 W (Under 0.1 W, Stand by)

6500

6510

6530

6540

6570

6750

6500 12.5 kg_with stand / 9.98 kg_without stand

6510 11.3 kg_with stand / 9.9 kg_without stand

6530 12.4 kg_with stand / 9.88 kg_without stand

6540 12.43 kg_with stand / 9.91 kg_without stand

6570 12.4 kg_with stand / 9.88 kg_without stand

6750 11.28 kg_with stand / 9.88 kg_without stand

Tuning Frequency Synthesize

System DVB-T/C/S/S2 (UK and 6**7_nordic : T/T2/C), PAL, SECAM, NT4.43

Sound BK , DK , NICAM , MPEG1

Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing

- MAX Internal speaker Out : Right/Left(10 W)

- BASS Control Range : -10dB ~ +10dB

- TREBLE Control Range : -10dB ~ +10dB

- Output Frequency : RF : 20 Hz ~ 15.4 kHz

933 (W) x 255 (D) x 608.2 (H) mm_with stand
933 (W) x 29.9 (D) x 548.8 (H) mm_without stand

923.5 (W) x 241.3 (D) x 617.4 (H) mm_with stand

923.5 (W) x 29.9 (D) x 539.6 (H) mm_without stand

923.5 (W) x 255 (D) x 603.5 (H) mm_with stand

923.5 (W) x 29.9 (D) x 539.6 (H) mm_without stand

929.5 (W) x 255 (D) x 606.4 (H) mm_with stand

929.5 (W) x 29.9 (D) x 545.3 (H) mm_without stand

923.5 (W) x 255 (D) x 603.5 (H) mm_with stand

923.5 (W) x 29.9 (D) x 539.6 (H) mm_without stand

923.5 (W) x 241.3 (D) x 617.4 (H) mm_with stand

923.5 (W) x 29.9 (D) x 539.6 (H) mm_without stand

AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: 3D, Media Bridge, AllShare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-6

2. Product specications

Model UE46D65** / UE46D67**

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 1-A/V, 3-USB2.0(Media Play), D-SUB , LAN, 1-Scart ሪ
Respons time : 5.5 ms ሪ
Dynamic contrast , Super-PVA ሪ
PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ
Dolby Digital+, SRS theater ሪ

Specications

Item Description

LCD Panel

Scanning Frequency

Display Colors

Maximum resolution

Input Signal

Input Sync Signal

Maximum Pixel Clock rate

Active Display (Horizontal/Vertical)

AC power voltage & Frequency

Power Consumption

Dimensions Set

(W x D x H)

Weight (Set)

TV System

Environmental Considerations

Audio spec.

46 inch HD 120Hz

Horizontal : 135.6 KHz(TYP) I Vertical : 120 Hz(TYP)

1.07G Colors

Horizontal : 1920 Pixels I Vertical : 1080 Pixels

Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

H/V Separate, TTL, P. or N.

80 MHz

1018.08 (H) x 572.67 (V) mm

AC 220-240 V 50/60 Hz

150 W (Under 0.1 W, Stand by)

6500

6510

6530

6540

6570

6750

6500 16.94 kg_with stand / 12.7 kg_without stand

6510 13.87 kg_with stand / 11.97 kg_without stand

6530 16.21 kg_with stand / 11.97 kg_without stand

6540 16.24 kg_with stand / 12 kg_without stand

6570 16.21 kg_with stand / 11.97 kg_without stand

6750 13.87 kg_with stand / 11.97 kg_without stand

Tuning Frequency Synthesize

System DVB-T/C/S/S2 (UK and 6**7_nordic : T/T2/C), PAL, SECAM, NT4.43

Sound BK , DK , NICAM , MPEG1

Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing

- MAX Internal speaker Out : Right/Left(10 W)

- BASS Control Range : -10dB ~ +10dB

- TREBLE Control Range : -10dB ~ +10dB

- Output Frequency : RF : 20 Hz ~ 15.4 kHz

1068.4 (W) x 275 (D) x 683.6 (H) mm_with stand

1068.4 (W) x 29.9 (D) x 625.2 (H) mm_without stand

1058.9 (W) x 276.6 (D) x 698.8 (H) mm_with stand

1058.9 (W) x 29.9 (D) x 616 (H) mm_without stand

1058.9 (W) x 275 (D) x 679.9 (H) mm_with stand

1058.9 (W) x 29.9 (D) x 616 (H) mm_without stand

1064.9 (W) x 275 (D) x 682.8 (H) mm_with stand

1064.9 (W) x 29.9 (D) x 621.7 (H) mm_without stand

1058.9 (W) x 275 (D) x 679.9 (H) mm_with stand

1058.9 (W) x 29.9 (D) x 616 (H) mm_without stand

1058.9 (W) x 276.6 (D) x 698.8 (H) mm_with stand

1058.9 (W) x 29.9 (D) x 616 (H) mm_without stand"

AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: 3D, Media Bridge, AllShare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-7

2. Product specications

Model UE55D65** / UE55D67**

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 1-A/V, 3-USB2.0(Media Play), D-SUB , LAN, 1-Scart ሪ
Respons time : 5.5 ms ሪ
Dynamic contrast , Super-PVA ሪ
PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ
Dolby Digital+, SRS theater ሪ

Specications

Item Description

LCD Panel

Scanning Frequency

Display Colors

Maximum resolution

Input Signal

Input Sync Signal

Maximum Pixel Clock rate

Active Display (Horizontal/Vertical)

AC power voltage & Frequency

Power Consumption

Dimensions Set

(W x D x H)

Weight (Set)

TV System

Environmental Considerations

Audio spec.

40 inch HD 120Hz

Horizontal : 135.6 KHz(TYP) I Vertical : 120 Hz(TYP)

1.07G Colors

Horizontal : 1920 Pixels I Vertical : 1080 Pixels

Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

H/V Separate, TTL, P. or N.

80 MHz

1209.6 (H) x 680.4 (V) mm

AC 220-240 V 50/60 Hz

160 W (Under 0.1 W, Stand by)

6500

6530

6570

6750

6500 21.98 kg_with stand / 17.3 kg_without stand

6530 21.83 kg_with stand / 17.15 kg_without stand

6570 21.83 kg_with stand / 17.15 kg_without stand

6750 19.65 kg_with stand / 17.15 kg_without stand

Tuning Frequency Synthesize

System DVB-T/C/S/S2 (UK and 6**7_nordic : T/T2/C), PAL, SECAM, NT4.43

Sound BK , DK , NICAM , MPEG1

Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing

- MAX Internal speaker Out : Right/Left(15 W)

- BASS Control Range : -10dB ~ +10dB

- TREBLE Control Range : -10dB ~ +10dB

- Output Frequency : RF : 20 Hz ~ 15.4 kHz

1258.8 (W) x 275 (D) x 791.4 (H) mm_with stand

1258.8 (W) x 29.9 (D) x 731.7 (H) mm_without stand

1247.7 (W) x 275 (D) x 805.4 (H) mm_with stand

1247.7 (W) x 29.9 (D) x 722.6 (H) mm_without stand

1247.7 (W) x 275 (D) x 805.4 (H) mm_with stand

1247.7 (W) x 29.9 (D) x 722.6 (H) mm_without stand

1247.7 (W) x 309.5 (D) x 824.4 (H) mm_with stand

1247.7 (W) x 29.9 (D) x 722.6 (H) mm_without stand

AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: 3D, Media Bridge, AllShare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-8

2. Product specications

Model UE60D65**

Feature

Digital-TV, RF, 4-HDMI, 1-Component, 1-A/V, 3-USB2.0(Media Play), D-SUB , LAN, 1-Scart ሪ
Respons time : 4 ms ሪ
Dynamic contrast , Super-PVA ሪ
PIP(in HDMI 1, 2, 3, 4, Component 1, PC Mode and Sub picture is available only in TV mode(DTV/ATV)) ሪ
Dolby Digital+, SRS theater ሪ

Specications

Item Description

LCD Panel

Scanning Frequency

Display Colors

Maximum resolution

Input Signal

Input Sync Signal

Maximum Pixel Clock rate

Active Display (Horizontal/Vertical)

AC power voltage & Frequency

Power Consumption

Dimensions Set

(W x D x H)

Weight (Set)

TV System

Environmental Considerations

Audio spec.

60 inch HD 120Hz

Horizontal : 135.6 KHz(TYP) I Vertical : 120 Hz(TYP)

1.07G Colors

Horizontal : 1920 Pixels I Vertical : 1080 Pixels

Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

H/V Separate, TTL, P. or N.

80 MHz

1329.12 (H) x 747.63 (V) mm

AC 220-240 V 50/60 Hz

TBD W (Under 1 W, Stand by)

1379.0 (W) x 335 (D) x 860.3 (H) mm_with stand

1379.0 (W) x 30.4 (D) x 799.4 (H) mm_without stand

29.1 kg_with stand / 23.5 kg_without stand

Tuning Frequency Synthesize

System DVB-T/C/S/S2 (UK and 6**7_nordic : T/T2/C), PAL, SECAM, NT4.43

Sound BK , DK , NICAM , MPEG1

Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing

Storage temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing

- MAX Internal speaker Out : Right/Left(15 W)

- BASS Control Range : -10dB ~ +10dB

- TREBLE Control Range : -10dB ~ +10dB

- Output Frequency : RF : 20 Hz ~ 15.4 kHz
AV/Componet / HDMI : 20 Hz ~ 20 kHz

Note: 3D, Media Bridge, AllShare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-9

2. Product specications

2-1-3. Spec Comparison to the Old Models

Model UD6V UC6U

UD650* UD653*

UD657* UD651*

Design

UD654* UD670*

Display Type LED TV LED TV

Built-in Tuner O O

Resolution 1920 x 1080 1920 x 1080

LCD Panel TFT LCD Panel 100Hz TFT LCD Panel 100Hz

Screen Size 32"/37"/40"/46"/55"/60" 32"/37"/40"/46"/55"

Picture ratio 16:9 16:9

3D O X

Built-in WiFi X X

Light Sensor O O

Picture Enhancer DNIe+(FBE3) DNIe+(FBE3)

Equalizer 5 Band 5 Band

Auto Motion Plus 120Hz YES YES

Surround Sound 2Way SRS TruSurround Dolby Digital 2Way SRS TruSurround Dolby Digital

Speaker Output

Energy Saving O O

32"/37"/40"/46" : 10W + 10W
55"/60" : 15W + 15W

32"/37"/40"/46" : 10W + 10W
55" : 15W + 15W

PIP O O

Game mode O O

Anynet+ O O

Antena DTV 1 (Cable/Air) DTV 1 (Cable/Air)

2-10

2. Product specications

2-2. Detail Factory Option

If you replace the main board with new one, please change the factory option as well. ※
The options you must change are "Type" and "Front Color".

2-2-1. UD65**

Model Name UE32D65** UE37D65** UE40D65** UE46D65** UE55D65** UE55D65**

Vendor CMI AUO

Panel

SMPS

1 Factory Reset - - - - - -

2 Type 32P1UF3E 37P1UF3E

3 Local set

4 Model UD65** UD65** UD65** UD65** UD65** UD65**

5 Tuner

6 DDR - - - - - -

7 Light Effect OFF OFF OFF OFF OFF OFF

8 Ch Table - - - - - -

9 Country - - - - - -

10 Front Color U-T-BL-M U-T-BL-M U-T-BL-M U-T-BL-M U-T-BL-M

CODE BN07-00996A BN07-00999A

SPEC LD320CSC-C1 LD370CSB-C1

Vendor HANSOE HANSOE SEM SEM SEM HANSOE

CODE BN44-00458B BN44-00458B BN44-00427A BN44-00427A BN44-00428A BN44-00425A

SPEC PD46A1D_BHS PD46A1D_BHS PD46B2_BSM PD46B2_BSM PD55B2_BSM -

EU_ITALY (only intaly models) EU_GER (only germany models)

EU_FRANCE (only france models) EU_BENELUX (only benelux models)

EU_UK (only england models) EU_ARMENIA (only armenia models)

NORDIC (only nordic models) EU (for the rest)

SEC_T2C (UK models and 65*7 nordic models)

CMI

AMLCD(LCM)

BN07-00997A
BN95-00449A

LD400CSC-C1
LTJ400HV01-V

40P1UF3E
40A1UF7E

SEC_TCS

CMI

AUO

AMLCD(LCM)

LD460CSC-C1

BN07-00984A
BN95-00450A

LD460CSB-A1

LTJ460HW01-V

46P1UF6E
46L1UF6E
46A1UF7E

CMI

AMLCD(LCM)

BN07-01034A
BN95-00451A

LD550CSC-C1

LTJ550HW01-V

55P1UF6E
55A2UF7E

SHARP(LCM)

BN95-00487A

LD600CGD-V3

60H1UF3E

U-T-BL-M

2-11

2. Product specications

2-2-2. UD67**

Model Name UE32D67** UE37D67** UE40D67** UE46D67** UE55D67**

Vendor CMI AUO

Panel

SMPS

1 Factory Reset -

2 Type 32P1UF3E 37P1UF3E

3 Local set

4 Model UD67** UD67** UD67** UD67** UD67**

5 Tuner

6 DDR - - - - -

7 Light Effect OFF OFF OFF OFF OFF

8 Ch Table - - - - -

9 Country - - - - -

10 Front Color U-T-CL-M U-T-CL-M U-T-CL-M U-T-CL-M U-T-CL-M

CODE BN07-00996A BN07-00999A

SPEC LD320CSC-C1 LD370CSB-C1

Vendor HANSOE HANSOE SEM SEM SEM

CODE BN44-00458B BN44-00458B BN44-00427A BN44-00427A BN44-00428A

SPEC PD46A1D_BHS PD46A1D_BHS PD46B2_BSM PD46B2_BSM PD55B2_BSM

EU_ITALY (only intaly models) EU_GER (only germany models)

EU_FRANCE (only france models) EU_BENELUX (only benelux models)

EU_UK (only england models) EU_ARMENIA (only armenia models)

NORDIC (only nordic models) EU (for the rest)

SEC_T2C (UK models and 65*7 nordic models)

CMI

AMLCD(LCM)

BN07-00997A
BN95-00449A

LD400CSC-C1
LTJ400HV01-V

40P1UF3E
40A1UF7E

SEC_TCS

CMI

AUO

AMLCD(LCM)

LD460CSC-C1

BN07-00984A
BN95-00450A

LD460CSB-A1

LTJ460HW01-V

46P1UF6E
46L1UF6E
46A1UF7E

AMLCD(LCM)

BN07-01034A
BN95-00451A

LD550CSC-C1

LTJ550HW01-V

55P1UF6E
55A2UF7E

CMI

2-12

2. Product specications

2-3. New Functions Explanation

2-3-1. Smart Hub

'11 Smart Hub vs '10 Internet@TV 

'11 Smart Hub

Concepts and Features Launcher : Internet TV, Media



Play, Content Button

Search All : Provides integrated search results for a



variety of areas

Full Browser : PC's Web browser, such as access to



common web site content and applications so you can

see

'10 Internet@TV

Internet TV, Media Player, content button

configured separately

Launcher - internet widget

Gallery -Free widget download / install

Horizontal / Vertical view modes

Internet@TV Button(Hot key on remote control)

Media. P Button(Hot key on remote control)

Comtent Button(Hot key on remote control)

2-13

2. Product specications

Smart Hub Concepts 

Gateway to access all type of diverse content

It's all integrated to guide you to easier diverse entertainment choice•

Control your entertainment life with easy and simple user friends UI•

Access to driverse Apps that are adding every day•

Customize your TV, by App grouping & sorting to your taste•

2-14

2. Product specications

2-3-2. Seach all

Function 

User can access the service using direct key on
remote control during TV viewing or using other App.

Supported four catecories

Your Movie: recommended movie or TV program

Top Application: popular Application list

Top Searched: popular searsh list

Search History

The application provides Web and SNS based search
engine.

YouTube



Facebook



Your Movie



Samsung Apps



AllShare



Websites



2-15

2. Product specications

2-3-3. AllShare

About AllShare™ 

AllShare™ connects your TV and compatible Samsung mobile phones/ devices through a network. On your TV,

you can view call arrivals and SMS messages, and received by your mobile phones. In addition, you can play media
contents including videos, photos, and music saved on your mobile phones or the other devices (such as your PC)
by controlling them on the TV via the network. Additionally, you can use your TV for browsing web pages on your
mobile phones.

N For more information, visit “www.samsung.com” or contact the Samsung call center. Mobile devices may need

additional software installation. For details, refer to each device’s user’s guide.

Setting Up AllShare™ 

O MENU → Network → AllShare Settings → ENTERE

AllShare Settings01.

Media (On / Off) : Enables or disables the media function. When the media

function is on, you can control Media contents play using mobile phones or other
devices that support DLNA DMC.

Message (On / Off) : Enables or disables the message function. (for call arrivals,

and SMS messages received by your mobile phones)

Media / Message02.

Shows a list of mobile phones or connected devices which have been set up to use the Media or Message function
with this TV.

N The Media function is available in all devices which support DLNA DMC.

Allowed / Denied• : Allows/Blocks the devices.

Delete• : Deletes the devices from the list.

N This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the

TV, it may appear on the list again.

Using the Message Function03.

You can view call arrivals and SMS messages received by your mobile mobile phone, through the alarm window,
while watching TV.

N NOTE

To disable the alarm window, set • Message to Off in the AllShare Settings.

Whether • OK is selected or not selected after a message has appeared once, the message will be deleted from
the alarm window.

When a message from an unknown mobile phone is displayed, select the mobile phone in the • Message menu in

AllShare Settings, and then select Denied to block the phone.

Message View

If a new SMS message arrives while you are watching TV, the alarm window appears. If you select OK, the
contents of the message are displayed.

N You can congure the viewing settings for SMS messages on your mobile phones. For the procedures, refer to the mobile

phone manual.

N Some types of characters may be displayed as blank or broken characters.

Call Arrival Alarm

If a call arrives while you are watching TV, the alarm window appears.

Schedule Alarm

You can view scheduled events in the alarm window while you are watching TV.

N You can congure viewing settings for scheduled contents on your mobile phones. For the procedures, refer to the mobile

phone manual.

N Some special characters may be displayed as blank or broken characters.

2-16

2. Product specications

Using the Media Function04.

An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will
be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you
press the RETURN or EXIT button when the alarm window appears, the media contents are not played.

N NOTE

The first time a device accesses your TV through the media function, a warning popup window appears. •
Press the ENTERE button to select Allow. This permits the phone to access the TV freely and use the Media
function to play content.

To turn off media contents transmissions from a mobile phone, set • Media to Off in the AllShare Settings.

Contents may not play on your TV depending on their resolution and format.•
The • ENTERE and l r buttons may not work depending on the type of media content.

Using the mobile device, you can control the media play. For details, refer to each mobile’s user’s guide.•

2-17

2. Product specications

AllShare™ setup and checklists 

Problem Possible Solution

Deleted mobile phone list showing up
again.

Want to turn off the function of receiving
message from the mobile phone.

Want to turn off the function of receiving
Media from mobile phone or home
network devices on TV.

Want to add deleted mobile phone or
home network devices again.

Several same names of TV shows up on
mobile phone.

Messages/schedules/notications from
unknown mobile phone show up on TV.

SMS message notication shows up in
small window.

Received SMS message is not showing
up on TV.

[Menu > Application > Content View > AllShare™ > Message] •
Where need to block the added mobile phone or device again. Because deleted
device would be added again if that device turns on or attempt to approach.

One of the setup lists of AllShare™, you need to turn 'Message' list to 'Off'.•

One of the setup lists of AllShare™, you need to turn 'Media' list to 'Off'.•

Power on the deleted mobile phone or home network devices. •
Set up the network and activate the home network function, check the connection
at AllShare™.

At AllShare™ set up menu, change the name of the TV.•

[Menu > Application > Content View > AllShare™ > Message] •
Where You can block the unknown mobile phone.

Besides watching TV, If some other function is activating, SMS message will show •
up in small icon.

You need to nish the function and exit to Watching TV mode in order to display •
SMS message in large window.

Check if TV’s network setup is all right according to setup guide.•
Check if mobile phone’s network (Wi-Fi) is activated.•
Among the • AllShare™ setup lists , check if the Message is ‘on’.
Check if the mobile phone number is showing up on • AllShare™ message list.
Check if the TV’s showing up on mobile phone’s setup lists.•

Contents that play on mobile phone
doesn’t play on TV.

Suddenly TV display is changed,
unwanted movie/picture/music is playing

The name of the TV is not appearing
while try to play media on mobile phone.

Movie is not playing or disconnected. High resolution of Movie may not play when Wi-Fi network is not in good condition.•

Contents formats play on TV is exactly same as Media Play format. •
That means some contents may not play according to its resolution and format

Before the device play, Block the device at AllShare™ media list. •
Or press ‘return’ or ‘exit’ button of remote controller so that the device may not play.

Check the network of TV.•
Activate the network (Wi-Fi) of mobile phone and connect to home network .•
Check if the setup list of media on AllShare™ is ‘on’.•
Check if mobile phone is blocked on media list . If blocked, change it to permition.•

2-18

2. Product specications

Troubleshooting about new functions 

Problem

AllShare (General)•

I see no device connected to AllShare.

I tried to play a video from my cell phone
using the Connected Home function on the
Samsung TV but the video would not display
on the TV.

A video that can be played on my cell phone
cannot be played on my TV.

I cannot resume playback of a video using
Connected Home.

When I play a video through Connected
Home, I get intermittent picture loss.

Possible Solution

To use a device connected to AllShare, the device must be connected to PC •
Share Manager which is the DLNA server for MediaPlay and to a cell phone that
has the Connected Home or Screen Share function which are found on Samsung
Smartphones.

Check that the PC Share Manager is enabled, the Samsung TV is set to allow •
connections and the ScreenShare function on the connected cell phone is enabled.

To use the cell phone’s Connected Home function, check that the shared folder is •
set and the Share mode is ‘On.’

When a video is transmitted from Connected Home to a TV for the rst time, the •
settings screen that allows transfer to a TV is displayed.

Check that the transfer was not set to be rejected on this settings screen. If you •
have set the cell phone to ‘Blocked’ in the ‘Media’ options of the AllShare settings,
please change the setting to ‘Unblocked’ and retry.

Please check the resolution and display format provided by MediaPlay of the TV.•

The resuming function is not supported for a video played on a cell phone.•

An 801.11b/g bandwidth network is used between a cell phone and a sharing •
device. There may be frequent buffering for HD quality videos, this also depends
on the condition of the wireless connection.

Please optimize your wireless Internet environment settings (avoid using wireless •
Internet or bluetooth altogether if possible) or lower the picture quality of the video.

AllShare (Notication)•

Can all devices with the DLNA function be
recognized through Notication?

Can I use all the services related to DLNA?

The notication screen that appears after
a device connects disappears within a few
seconds.
How can I access this connected device
again?

AllShare (ScreenShare Client)•

I cannot nd the RUIS on my cell phone.

Only Samsung software and devices with the DLNA server function can be •
recognized through Notication.

Presently, you can only use the services related to ScreenShare and MediaPlay. •
We will launch a new DLNA service in the future.

The DLNA Notication is only displayed when a device is rst connected to a TV. •
To access the device again, please use the AllShare menu.

Check that the cell phone is connected to the wireless sharing device correctly.1.
Check that the DTV is connected either using a network cable or wirelessly to the 2.

wireless sharing device correctly.
Conrm the IP address and subnet mask to ensure that the cell phone and DTV 3.

are connected to the same network.
Check that the RUIS on the cell phone is enabled.4.
If the RUIS on the cell phone is enabled, please disable it and then enable it again.5.

2-19

2. Product specications

Problem

AllShare (ScreenShare Server)•

I cannot nd the remote control service
provided by the ScreenShare Server from the
ScreenShare Client.

The DTV did not update after pressing
buttons on the remote control that uses the
remote control service on the ScreenShare
Client.

Possible Solution

Check that the ScreenShare Client device is correctly connected to the network of 1.
the sharing device that the DTV is connected to.

Run network test in the network setup menu and conrm that MAC Address, IP 2.
Address, Subnet, Gateway, DNS Server and Gateway Ping each shows a success
message.

In the network setup menu, check that the ScreenShare Client and ScreenShare 3.
Server are on the same subnet.

- You can conrm they are on the same subnet by checking the IP address,
subnet mask and gateway address of the TV and ScreenShare Client as follows:

- If the IP address of the DTV is 10.88.83.4 and the subnet mask is 255.255.255.0,
the rst six digits of the ScreenShare Client’s IP address must be the same
(10.88.83) as that of the DTV, and the subnet mask and gateway address must
be the same as the DTV.

- If the IP address of the DTV is 10.88.83.4 and the subnet mask is 255.255.0.0,
the rst four digits of the ScreenShare Client’s IP address must be the same
(10.88) as that of the DTV, and the subnet mask and gateway address must be
the same as the DTV.

Move from the Allshare screen to the Setup screen, and open the Setup menu to 4.
check if the ScreenShare Client is connected to the same ScreenShare Server as
the TV name shown in the Setup options.

Move from the Allshare screen to the Setup screen, and open ScreenShare to 5.
check that the device, ScreenShare Client, is found on the list at the right side and
is set to "Allowed."

Check that the TV is turned on. •
You cannot turn on the TV using the remote control service (on the ScreenShare)
when the TV is turned off.

2-20

2. Product specications

2-3-4. Media Play

Media Play 

Functions that are not supported when connecting to a PC through a network:01.

- Sorting files by preference in the Photos, Music, and Videos folders.

- The � (REW) or μ (FF) button while a movie is playing.

- Divx DRM, Multi-audio, embedded captions are not supported.

When you use Media Play mode through a network connection, depending on the functions of the 02.
provided server

- The sorting method may vary.

- The scene search function may not be supported.

- The Play Continuously function, which resumes playing of a video, may not be supported.

- The Play Continuously function does not support multiple users. (It will have only memorized the point where the most recent user
stopped playing.)

- The ◄ or ► buttons may not work depending on the content information.

– If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired network."

● Supported Subtitle Formats

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based

SubViewer .sub string-based

Micro DVD .sub or .txt string-based

● Supported Video Formats

File

Extention

*.avi

*.mkv

*.asf ASF

*.wmv ASF Window Media Video v9 1920 x 1080 6 ~ 30 25 WMA

*.mp4 MP4

*.3gp 3GPP

*.vro

*.mpg

*.mpeg

*.ts
*.tp

*.trp

Container Video Codec Resolution

Divx 3.11/4.x/5.1/6.0 1920 x 1080 6 ~ 30 8

AVI

MKV

VRO
VOB

PS

TS

XviD 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

MPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

Motion JPEG 1920 x 1080 6 ~ 30 8

Divx 3.11/4.x/5.1/6.0 1920 x 1080 6 ~ 30 8

XviD 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

MPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

Motion JPEG 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

XVID 1920 x 1080 6 ~ 30 8

H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25

MPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

MPEG2 1920 x 1080 24/25/30 30

MPEG1 1920 x 1080 24/25/30 30

MPEG1 1920 x 1080 24/25/30 30

MPEG2 1920 x 1080 24/25/30 30

H.264 1920 x 1080 6 ~ 30 25

MPEG2 1920 x 1080 24/25/30 30

H.264 1920 x 1080 6 ~ 30 25

VC1 1920 x 1080 6 ~ 30 25

Frame rate

(fps)

Bit rate

(Mbps)

Audio Codec

MP3/AC3

/LPCM

/ADPCM

/DTS Core

MP3/AC3

/LPCM

/ADPCM

/WMA

MP3/ADPCM /AACMPEG4 SP/ASP 1920 x 1080 6 ~ 30 8

ADPCM/AAC

/HE-AAC

AC3/MPEG

/LPCM

AC3/MPEG
/LPCM/AAC

AC3/AAC

/MP3/DD+

/HE-AAC

2-21

2. Product specications

Other Restrictions03.

N NOTE

If there are problems with the contents of a codec, the codec will not be supported.•

If the information for a Container is incorrect and the le is in error, the Container will not be able to play correctly.•

Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the •
table above.

Video Decoder Audio Decoder

Supports up to H.264, Level 4.1•

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and •
AVCHD are not supported.

XVID, MPEG4 SP, ASP: •
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max

GMC is not support.•

Supports up to WMA 7, 8, 9, STD, 9 PRO•

WMA 9 PRO is not supported the 2 channel excess multi •
channel or the lossless audio

WMA sampling rate 22050Hz mono is not supported. •
ReadlAudio 10 lossless is not supported

2-22

2. Product specications

2-3-5. 3D Display

What is 3D Display? 

A system that display 3D images articially •

How ? •  Using binocular time delay
1 Left eye recognizes left image, right eye recognizes
right image.
2 Human eyes be far away each other 65mm
horizontally.
So each eye feels a little bit of time delay of left and
right information.
Human brain merges those images and can feel
three-dimensional.

Side by side ◄

3D OSD terms 

3D Format : There are several 3D formats existing on how to merge Left and Right images.

Format Input images explanation Input source notes

Frame Packing

Inserting Blink Active Space between Left and Right •
images.
* Full resolution : 1920 x 1080 x 2
(Left and Right each) + Blink = 1920 x 2205

HDMI 1.4 1. HDMI 1.4 standard format

2. Automatically activating
(Not in the menu or UI)

3. BD format

Top & Bottom

Side by Side

2D → 3D Extract Left and Right images articially from normal 2D contents input and show it in 3D. (a function of TV)

3D → 2D

Depth

L/R correction

3D Disable
(3D off)

When watching 3D TV (input is 3D source) , if a viewer feels tired of watching 3D TV, a viewer can change the TV into 2D.
(In this case , TV only displays one of Left and Right images)

Only activating in ‘2D → 3D Mode’
Control the depth of 3D. 1~10 steps, Tiredness goes higher as depth goes higher.

Switch the position of Left and Right images so that correspond with 3D glasses.

‘3D off’ has below meanings according to present modes .

(1) In 2D → 3D Mode : coming back to 2D

(2) In 3D mode

In 1 frame, Left image on the upper half, Right image •
on the bottom half.
* Vertically half resolution

In 1 frame, Left image on the left half, Right image on •
the right half.
* Horizontally half resolution

HDMI, USB,
DTV(VOD),
PC

HDMI, USB,
DTV(VOD),
PC

3D Broadcasting Format

3D Broadcasting Format

2-23

2. Product specications

3D Supporting Formats 

DTV

Top-Bottom

Side by Side

2D  3D

MPO - - - - - - -

SAVE(SS.TB) - - - - - - - -

HDMI 1.4a - - - - -

Over

Over

720P

720P

Internet

VOD

All Resolution Over

All Resolution Over

ATV/AV Comp. A.PC HDMI HDMI_PC

720P -

720P -

All Resolution

Over

720P

Over

720P

Over

720P - - -

Over

Over

720P

720P

USB

(Photo)

All Resolution All Resolution

All Resolution All Resolution

All Resolution

N •  : If the resolution is lower than 1920 x1080, PC Format(LL, VS, ChBD) and USB photo support only original size.

•  : If the format is one of the below three case, the 20pixels on either side are processed by black.

• USB photo : If the resolution is below 1920x1080, L/R images must be placed in the center of the screen

- 2D  3D(all source)

- Side by Side (component source)

- Top-Bottom (component source)

3D Glasses Enhancement in 2011 

3D Format : There are several 3D formats existing on how to merge Left and Right images.

Item RF Auto On / Off

Purpose

USB

(Video)

-

All Resolution

Improvement

Remarks

To avoid external IR nois interference No power key

Dual Direction

Communication

Wear glasses  Turn on

Take off glasses  Turn off

Automatically

2-24

2. Product specications

2-3-6. Built in Wi-Fi

Built in Wi-Fi 

Gives more convenient set-up and optimize to use Ethernet.

Smart TV Accessory - Wireless Router01.

Easy Set-up & Optimized Solution for using Ethernet

• One Foot Connection

Establish a Wi-Fi connection to any compatible device placed within 25 cm distance

• USB configuration

Insert USB to router Insert USB to Samsung TV
Configurations is safely stored on USB drive and restored on TV

(Samsung Patent pending)

Network Settings (OFC, One Foot Connection 

The One Foot Connection function lets you connect your Samsung TV automatically to Samsung wireless APs.
If your non-Samsung AP does not support One Foot Connection, you must connect using one of the other methods.

How to set up using One Foot Connection01.

Go to Network Settings screen. 1.
To enter it, follow the directions of Network Settings.

Select the One Foot Connection.2.

Place the AP in parallel with the Samsung Wireless LAN Adapter giving 3.
a gap no larger than 25 cm.

Wait until the connection is automatically established.4.

The network test screen appears, and network setting is done.5.

Place the AP in a desired location.6.

Network Settings (Plug & Access) 

Plug & Access function lets you connect your Samsung wireless Router to Samsung TV easily by using USB memory. If

your non-Samsung AP does not support Plug & Access, you must connect using one of the other methods.

* You can check for equipment that supports Plug & Access on www.samsung.com.

How to set up using Plug & Access Function

Turn on the power of AP and TV. 1.
Insert USB memory stick into our Samsung wireless APs and checking AP’s LED status (blinking on).

Then take USB memory out and insert your USB memory into Samsung TV. 2.

Wait until the connection is automatically established.3.

If 4. Plug & Access does not connect your TV to your AP, a pop-up window appears on the screen notifying you of the failure. If you
want to try using Plug&Access again, reset the AP, disconnect the Samsung Wireless LAN Adapter and then try again from Step 1.
You can also choose one of the other connection setup methods.
The network test screen appears, and network setting is done.5.
Place the AP in a desired location.6.

If the AP settings change or you install a new AP, you must perform the 7. Plug & Access procedure again, beginning from Step 1.

2-25

2. Product specications

Problem

Network Setup•

How do I setup the network?

How do I check the network status?

In a network test over a wired connection,
the second items which include the IP
address, subnet, gateway and DNS server
fail.

In a network test over a wired connection,
the third item, gateway ping fails.

cannot connect to a wireless network.

Possible Solution

Click the [Menu] button and open [Setup] to select [Network]. •
Congure wired or wireless network settings.
For details, please refer to the IB.

Select [Menu] •  [Setup]  [Network] and run [Network Test] to see test results and
check the network status.

If the IP address, subnet mask and gateway address were typed in manually, •
check that valid values were entered.
(For example, 0.0.0.0 is not valid for an IP address, subnet mask or gateway
address.)
If the IP address the user entered in is invalid, change it to a valid IP address.

Check that the network cable is connected to the TV correctly.1.
If the TV is connected correctly, check whether the IP address is automatic or 2.

manual.
If the IP is automatic and connected to a sharing device, check the settings of the 3.

sharing device (AP) that is using a cable connection, or consult the corresponding
Internet service provider.

If the IP is manual, check if the IP address is entered correctly. 4.
(Here, the user should conrm if the manual IP address entered in is valid.)

If an encryption key must be entered in to connect to a sharing device, please 1.
check that the correct password set for the sharing device is entered.

Search surrounding sharing devices to see if there is a sharing device with the 2.
same SSID by selecting [Wireless Network Setup] and [Select Network].
If there is a sharing device with the same SSID, try to connect to this device.

If the IP address is set to automatic and you cannot connect to the sharing 3.
device using option 1 or 2, check the settings of the sharing device to see if the
DHCP server function on the sharing device is enabled. If disabled, activate the
function. (For details on how to set up the sharing device, see the manual for the
corresponding sharing device.)

If you still cannot connect to the sharing device after conrming options 1, 2 and 3, 4.
reset the sharing device and try again.

When using a wireless network, the user’s
wireless sharing device cannot connect to
the PBC (WPS).

The auto-conguring sharing device cannot
be connected to automatically through a
wireless dongle.
(Here, the user’s sharing device must
support auto-conguration.)

Although the TV is placed close to the AP
and the dongle is inserted into the TV, the
sharing device cannot be connected to using
auto-conguration.

Although the TV is placed close to the AP
and the dongle is inserted into the TV, the
sharing device cannot be connected to using
auto-conguration and a message that it is
connecting is displayed only.

Check if the sharing device of the user supports WPS. 1.
(Refer to the manual of the sharing device.)

Check if the user pressed the PBC button on the sharing device.2.
If there is another sharing device with WPS running nearby, a connection cannot 3.

be made. Please retry after 2 minutes.
Reset the sharing device and retry.4.
If the sharing device of the user is not Wi-Fi certied, it may not be able to connect 5.

using WPS.

Check if the sharing device of the user supports auto conguration. 1.
(For a list of sharing devices, refer to the IB or website.)

If the sharing device of the user supports auto conguration, place the sharing 2.
device as close as possible to the wireless dongle on the TV and try to re-establish
the connection. (Must be placed close to the TV to establish a connection.)

Select [Menu] •  [Setup]  [Network] and check if SWL is Off.

Check if the AP is not turned off during connection. •
If the AP is turned off, the TV will try to re-establish a connection for 2 minutes.