Level
7.
Disassembly and Assembly Instructions
7-1.
Repair
2
7-1-1.
1)
Disassembly
1
Disjoint Hook at REAR // Disassemble REAR
Be careful not to make scratch and molding damage!
Use flat point of disassembly jig
1)
2
Disassemble SCREW
Disassemble SCREW(12point)
1)
Detach Battery connector
2)
Disassemble FPCB
3
Hold up Main PBA from bottom.
1)
Be careful nottoscratch FPCB
2)
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
4
Disassemble SPK(L),(R), IF PCB
1)
2)
Disassemble PBA
5
Hold up Main PBA from FRONT.
Be careful nottoscratch FPCB
7-1-2.
1)
2)
Assembly
1
Assemble PBA
Check
PCB Hook
Assemble PBA on Front Ass'y
Check Front hook.
Assemble IF PCB/SPK on FRONT.
2
Assemble IF PCB,Earjack and SPK on Front.
1)
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.