Samsung T3 Installation Manual

Installation manual for Samsung SSD T3 drive

FOR PC WITHOUT ADMIN-RIGHTS

1. Insert the Samsung SSD T3 in a free USB-port

2. The Samsung SSD T3 driver will be installed, please wait until you see a message on the lower

right corner of your screen that says: “Your device is ready to use”

3. Click the “START” button

4. Scroll down and click on “All Programs” and then on “Novell Zenworks”

5. Click on “Zenworks Application Window”

6. Click on Utilities

7. Doubleclick on Samsung T3 Security Enabler

8. Wait until you see the following Welcome screen:

9. Click “Next”

1

10. Now you can set a password to protect the data on your new SSD drive, when you are done click

the “OK” button

11. Click “Finish”

12. From now on: when you disconnect the SSD and reconnect the SSD again, you will need to enter

your password and you will see this login screen:

2