SAMSUNG SV-DVD940 User Manual

DVD-VCR

DVD/VCRPROG

STANDBY/ON

REC

EZ VIEW

DVI VIDEO

OPEN/CLOSE

STANDBY/ON

DVD-VIDEOMAGNÓ

SV-DVD940

Instruction Manual

Használati útmutató

www.samsungvcr.com

PAL

Contents

◆ FOREWORD

■ Safety Instructions................................................................................................................ 5

■ Disc Type and Characteristics ............................................................................................. 6

◆ DVD-VCR OVERVIEWS

GB GB

■ Front View of the DVD-VCR................................................................................................. 7

■ Rear View of the DVD-VCR ................................................................................................. 7

■ Infrared Remote Control....................................................................................................... 8

■ Display Indicators................................................................................................................. 9

■ Accessories.......................................................................................................................... 9

◆ CONNECTING YOUR DVD-VCR

■ Deciding How to Connect DVD-VCR ................................................................................... 10

■ Connecting DVD-VCR to the TV using the Coaxial Cable ................................................... 11

■ Connecting DVD-VCR to the TV using the SCART Cable................................................... 11

■ Connecting DVD-VCR to a Satellite Receiver or Other Equipment ..................................... 12

■ Plug & Auto Set Up .............................................................................................................. 13

■ Tuning Your Television for the DVD-VCR............................................................................ 14

■ Deck Control Keys ...............................................................................................................15

■ Basic TV Tuner Operations.................................................................................................. 16

■ Inserting Batteries in the Remote Control ............................................................................ 17

■ Setting the Date and Time ................................................................................................... 17

■ Setting the Menu Language ................................................................................................. 18

◆ SETTING UP YOUR DVD-VCR

■ Presetting the Stations Automatically................................................................................... 19

■ Presetting the Stations Manually.......................................................................................... 20

■ Clearing a Preset Station ..................................................................................................... 21

■ Changing the Preset Station Table ...................................................................................... 22

■

Selecting the RF OUT Sound Mode (B/G-D/K)

■ Setting the DVD-VCR Output Channel ................................................................................ 23

■ Selecting the Colour Mode................................................................................................... 24

■ NICAM.................................................................................................................................. 24

■ Intelligent Picture Control .....................................................................................................25

■ Intelligent Picture Control (Remote Control) ........................................................................ 25

■ ShowView Extend ................................................................................................................ 26

■ Auto Power off...................................................................................................................... 26

■ Screen Messages ................................................................................................................ 27

■ Selecting the Cassette Type ................................................................................................ 27

■ Repeat Play.......................................................................................................................... 28

■ S-VHS Play .......................................................................................................................... 28

........................................................................... 23

◆ RECORDING TELEVISION BROADCASTS

■ Selecting the Recording Speed................................................................................................ 29

■ Protecting a Recorded Cassette .............................................................................................. 30

■ Recording a Programme Immediately...................................................................................... 30

■ Recording a Programme with Automatic Stop ......................................................................... 31

■ Using the ShowView Feature................................................................................................... 32

■ Modifying ShowView Programming ......................................................................................... 33

■ Using the Timer Programming Feature.................................................................................... 34

■ Checking a Preset Recording .................................................................................................. 35

■ Cancelling a Preset Recording................................................................................................ 35

◆ PLAYING BACK

■ Playing a Cassette ................................................................................................................... 36

■ Adjusting Picture Alignment Manually...................................................................................... 36

■ Selecting the Audio Output Mode ............................................................................................ 37

■ Playing a Cassette in Slow Motion........................................................................................... 37

■ Playing a Sequence Frame by Frame...................................................................................... 38

■ Playing a Sequence at Variable Speeds.................................................................................. 38

■ Searching for a Specific Sequence .......................................................................................... 39

■ Using the Tape Counter ........................................................................................................... 41

■ Using the Assemble Edit Function ........................................................................................... 42

■ Recording from Another VCR or Camcorder ........................................................................... 42

■ Using the TV Buttons on the Remote Control .......................................................................... 43

◆ DVD FUNCTIONS

■ Choosing a Connection............................................................................................................ 44

■

Setting Up the Language Features

■

Setting Up the Audio Options

■

Setting Up the Display Options

■

Setting Up the Parental Control

■

A/V Receiver Connections

■

Special Playback Features

■

Adjusting the Aspect Ratio (EZ View)

■

Using the Display Function

■

Changing the Camera Angle

■

Selecting the Subtitle Language

■

Repeat Play

■

Selecting the Audio Language

■

Using the Mark Function

■

MP3/WMA Play

■

Program Play & Random Play

■

Picture CD Playback

................................................................................................................................57

........................................................................................................................... 60

.................................................................................................................... 63

................................................................................................ 46

........................................................................................................ 48

..................................................................................................... 49

.................................................................................................... 50

........................................................................................................... 51

........................................................................................................... 52

............................................................................................ 53

........................................................................................................... 55

........................................................................................................ 56

.................................................................................................... 56

...................................................................................................... 58

.............................................................................................................. 59

...................................................................................................... 62

2 3

Contents (cont.)

5°C

40°C

10% 75%

Safety Instructions

◆ SOLVING PROBLEMS

■ Technical Specifications ...................................................................................................... 65

GB GB

■ Problems and Solutions (VCR)............................................................................................ 66

■ Troubleshooting Guide (DVD) ............................................................................................. 67

The following illustrations represent precautions.

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

This manuel is divided into two sections:

Prior to undertaking anything, please verify in which section you actually are by

checking either the or symbols or the header of the chapter.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

one describing the VCR; the other, the DVD.

DVDVCR

Do NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT expose the DVD-VCR to direct sunlight.

Do NOT expose the DVD-VCR to any liquids.

1 1

Press/push

= Step number

4 5

Symbols

Hold down

☛

Important Note

➢

Do NOT place any objects on the DVD-VCR or remote control.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

During a storm and/or lightning, unplug the DVD-VCR from the mains socket and aerial.

ENVIRONMENTS

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

Disc Type and Characteristics

Front View of the DVD-VCR

RECORD BUTTON

REC

OPEN/CLOSE

BUTTON

EZ VIEW

VIDEO CASSETTE COMPARTMENT

OPEN/CLOSE

EZ VIEW BUTTON

AV2 (DEC./EXT.) SCART (EURO-21) SOCKET

DVI SELECT BUTTON

DVD/VCR SELECT BUTTON

DVD/VCRPROG

PROGRAMME SELECTION

BUTTON

AUDIO L, R OUT SOCKETS

AERIAL IN CONNECTOR

AUDIO L, R OUT SOCKETS (DVD ONLY)

LINE OUT

DVI VIDEO

AUDIO

DIGITAL AUDIO OUT

COAXIAL

OPTICAL

EJECT BUTTON

DVI OUT JACK

DVI OUT

S-VIDEO OUT

This DVD player is capable of playing the following types of discs with the corresponding logos :

GB GB

Disc Types

(Logos)

DVD

AUDIO-CD

Recording

Types

Audio

Video

Disc Size

12 Cm

8 Cm

12 Cm

Audio

8 Cm

* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!

(CDGs play audio only, not graphics.)

* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.

Max.

Playing

Time

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

74 min.

20 min.

Characteristics

• DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio functions can be easily selected through the on-screen menu.

• An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

STANDBY/ON BUTTON

STOP BUTTON

Rear View of the DVD-VCR

DVD DECK

REW /SKIP BACK

BUTTON

STANDBY/ON

PLAY/STILL BUTTON

F.F / SKIP NEXT BUTTON

Disc Markings

• Playback Region Number

PAL

• PAL colour system in U.K, France, Germany, etc.

NTSC

• NTSC broadcast system in USA, Canada, japan, South Korea, etc.

• Dolby Digital disc

STEREO

• Stereo disc

DIGITAL

SOUND

• Digital Audio disc

• DTS disc

Playback Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

AV1 (EURO AV) IN/OUT SCART (EURO-21) SOCKET

VIDEO OUT SOCKET

OUT TO TV CONNECTOR

S-VIDEO OUT JACK

DIGITAL AUDIO OUT SOCKET (OPTICAL)

DIGITAL AUDIO OUT SOCKET (COAXIAL)

6 7

O P E N / C L O

S E

S T A N D B

Y / O N

Infrared Remote Control

OPEN/CLOSE

STANDBY/ON

Display Indicators

1 2 3 4 5

GB GB

11 12

13 14 15

16 17

27 28 29

32 33

1 STANDBY/ON 2 SHUTTLE << / >> 3 CLEAR

4 DVD

5 TV MUTE. AUDIO 6 VOLUME +/– 7 REWIND

SKIP BACK

8 STOP 9 SUBTITLE 10 MENU 11 UP 12 LEFT 13 DOWN 14 SPEED 15 RECORD 16 TIMER 17 ANGLE

IPC

18 OPEN/CLOSE 19 0-9 20 TV/VCR 21 VCR, TV SELECT 22 INPUT SEL.

F.ADV/STEP

23 PROG

TRACKING

24 FAST-FORWARD

SKIP NEXT

25 PLAY/STILL 26 INFO. 27 RETURN 28 RIGHT 29 OK 30 EZ VIEW 31 DISC MENU 32 MARK

33 MODE

REPEAT

6 7 8

1 The DVD Deck is active

2 A DVD, CD or SVCD is loaded

3 The time, counter position, time remaining or

current deck status is displayed

4 VHS tape is inserted

5 The VCR Deck is active

Accessories

You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).

Together with your DVD-VCR, you will find the following accessories in the box.

REMOTE CONTROL

& BATTERIES

AUDIO & VIDEO

CABLE

STEREO

6 A DVD with a DTS soundtrack is loaded

7 The Hi-Fi track of a VHS tape is playing

(The current TV show or video is broadcast in

Stereo)

8 A Timer Recording is programmed or in progress.

OWNER’S

INSTRUCTIONS

COAXIAL CABLE

8 9

LINE O

LINE OUT

Deciding How to Connect DVD-VCR

S-VIDEO OUT OPTICAL

COAXIAL

You must take into account various factors when connecting audio or video systems:

◆ Types of connectors available on your systems

GB GB

◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily (camcorder for example)

Your DVD-VCR is equipped with the following connectors.

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from one of the following sources:

◆ An outdoor aerial

◆ An indoor aerial

◆ A cable television network

◆ A satellite receiver

☛ Make sure that both the television and the DVD-VCR

are switched off

before connecting the cables.

1 Remove the aerial or network input cable from the television.

Connector Location Type Direction Recommended Use

AV1 (EURO AV)

AV2 IN Rear SCART In ◆ Satellite receiver

Rear SCART In/Out ◆ Television

◆ Satellite receiver

◆ Other VCR

Audio output Rear Audio RCA Out ◆ Audio out

2 Connect this cable to the 75Ω coaxial socket marked on

the rear of your DVD-VCR.

3 Plug the coaxial cable supplied into the socket on your

DVD-VCR.

4 Plug the other end of the coaxial cable into the connector

previously used for the aerial on the television.

5 To obtain better quality pictures and sound on your television,

you can also connect your DVD-VCR to the television via the SCART cable (see section below) if your television is equipped with this type of connection.

VIDEO output Rear RCA Out ◆ Video out

S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only) output

Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only) output Coaxial

OUT TO TV Rear 75 Ω Out ◆ Television

coaxial

IN FROM ANT. Rear 75 Ω In ◆ Aerial

coaxial ◆ Cable television network

◆ Satellite receiver

DVI OUTPUT Rear DVI Out ◆ DVI video out (DVD only)

☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements

are switched off

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

10 11

Connecting DVD-VCR to the TV using the SCART Cable

Aerial

LINE OUT

RF coaxial cable

You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is available on the television. You thus:

◆ Obtain better quality sound and pictures

◆ Simplify the setting up procedure of your DVD-VCR

☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable

supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched off cables.

SCART Cable

before connecting the

1 Connect the coaxial cable as indicated in the above section.

2 Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.

3 Plug the other end into the appropriate connector on the television.

AUDIO

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

LINE O

Auto setup

Please wait

00 %

You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.

GB GB

1. AV1(EURO AV): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the DVD-VCR. After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner. RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the DVD-VCR, e.g. re-adjust to channel 39.

Satellite Receiver or other Equipment

RF coaxial cable

Aerial Connector

SCART Cable

Aerial

1. AV2 IN: By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of the DVD-VCR. After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.

Plug & Auto Set up

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

1 Connect the coaxial cable as indicated on page 11.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains.

Result: The Language Set menu is displayed.

3 Select the required language by pressing the

4 Press OK to store the language selected.

Result

: A message appears.

5 Press OK button.

6 Press the

7 Press OK to start the auto scanning.

8 The current time and date are displayed automatically.

➢ Auto preset can be performed by pressing

or❷

☛ The VCR searches for the stations according to a preset

preference list corresponding to the country that you have selected.

◆ The number of stations automatically stored by the VCR

depends on the number of stations that it has found.

Check the date and time.

if it is :

◆

Correct, Press RETURN button twice to exit the menu.

◆

incorrect, see page 17.

the VCR continuously for 5 seconds or more with no tape inserted.

buttons to select your country.

or❷

buttons.

(STOP) on

■

2. By means of RF Coaxial Cable

Satellite Receiver or other Equipment

Aerial Connector

Aerial

Time Date Year 12 : 00 1 / JAN / 2003 WED

Clock Set

12 13

RF coaxial cable

SCART Cable

STANDBY/ON

Tuning Your Television for the DVD-VCR

Deck Control Keys

STANDBY/ON

You must tune your television for the DVD-VCR only if you are

using a Scart cable

not

OPEN/CLOSE

➢ To view pictures from your DVD-VCR when a Scart

cable is used, the television must be set to the audio/video mode (AV).

1 Switch on the television.

2 Switch on the DVD-VCR by pressing STANDBY/ON on the front

of the DVD-VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television to be reserved for

use with your DVD-VCR.

4 Insert the video cassette in the DVD-VCR. Check that the

DVD-VCR starts reading the cassette; if not, press

5 Start a scan on your television or set the television to UHF

channel 36.

6 Fine tune the television until the pictures and sound are obtained

clearly.

7 If you cannot find the pictures and sound, or there is interference

from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 23 and Problems and Solutions on page 66).

8 When the picture and sound are perfectly clear, store this

channel at the desired programme position on the television. Result: That programme is now reserved for use with your

DVD-VCR.

❿

button

The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.

1 STANDBY/ON Button

Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR.

2 DVD Button

Press the DVD button on the remote control when you want to control the DVD deck.

◆ The DVD indicator will light on the Front Panel Display to

show that the DVD deck is selected.

3 VCR Button

Press the VCR button on remote control when you want to control the VCR deck.

◆ The VCR indicator will light on the Front Panel Display to

show that VHS deck is selected.

4 INPUT SEL. BUTTON

Press the INPUT SEL. button repeatedly to cycle through all of your input sources, including the Tuner (PR##), AV1 (rear AV input), AV2 (rear AV input), AUX (front AV input).

• It is only available when VCR deck is selected.

➢ Before using the VCR operation of 19~43 pages, press

the VCR button on the remote control to select VCR mode.

Before using the DVD operation of 44~64 pages, press the DVD button on the remote control to select and watch DVD.

Time Date Year

Clock Set

12 : 00 1 / JAN / 2003 WED

Language : English

User Set Auto Power Off : Off Screen Messages : On

Install

Basic TV Tuner Operations

The following buttons are used when watching television via the DVD-VCR’s built-in TV tuner.

GB GB

1 TV/VCR Button

Press to switch between your TV’s tuner and the VCR’s internal tuner.

2 PROG Button

Press to change to the next or previous channel.

3 0-9 Buttons

Press to select channels directly.

4 INFO.

Press to display the channel you are watching.

◆ Also works in DVD and VCR mode.

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the DVD-VCR

◆ Find that the remote control is no longer working

correctly

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2 Insert two AAA, RO3 or equivalent batteries, taking care to

respect the polarities:

◆ + on the battery with + on the remote control

◆ – on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

➢ Do not mix different battery types (manganese and

alkaline for example).

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆ Automatically stop programme recording

◆ Preset your DVD-VCR to record a programme

16 17

automatically

You must set the date and time when:

◆ You purchase the DVD-VCR

◆ The time and date are set automatically from the

☛

1 After pressing the MENU, press the OK or

2 Press the corresponding

3 Press the OK or

4 Press

5 Press the

broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically. In this case, they should be set manually.

◆ Do not forget to reset the time when you change clocks from winter to summer time and vice versa.

Result: The Setup menu is displayed.

option.

Result

:The Clock Set menu is displayed.

➛or❿

Result

➢ You can hold the

to select the hour, minutes, day, month and year.

: The option selected highlight.

or❷

: The day of the week is displayed automatically.

quickly through the values.

,❷

❿

to select this option.

buttons to increase or decrease the value.

or❷

❿ .

buttons to select the Clock

buttons down to scroll more

6 On completion, press RETURN to exit the menu.

Auto Setup

Your date will be lost Press OK to continue Menu to exit

Auto Setup

Manual Setup TV System : K VCR Output CH : CH 36

Install

Setting the Menu Language

Français Deutsch Español Italiano Nederlands

Language Set

English

Auto Setup

Please Wait 15%

1 Open “MENU”

After pressing the MENU, press the OK or

GB GB

Language : English

Install

User Set Auto Power Off : Off Screen Messages : On

2 Select “Language”

Use the or❷buttons to highlight “Language,” then press the OK or

3 Set menu Language

Place the selection arrow next to your desired Language, then press the OK button.

4 Press the

or❷

Place the selection arrow next to your desired Language, then press the OK button.

buttons to select language you want.

5 On completion, press RETURN to exit the menu.

❿ .

Presetting the Stations Automatically

You do not need to preset the stations if you have already

☛

set them automatically (see Plug & Auto Set Up on page 13).

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆ Plug & Auto Set up (see page 13)

◆ Automatically

◆ Manually (see page 20)

You can store up to 80 stations.

1 After pressing the MENU, press the OK or

Result: The Setup menu is displayed.

2 Press the corresponding

option.

3 Press the OK or

Result

: The Install menu is displayed.

4 Press the corresponding

Setup is selected.

And then press the OK or

: A message appears, indicating that any channels

Result

already preset on your DVD-VCR will be deleted.

5 Press the

6 Press OK button.

7 Press OK to start the auto scanning.

8 If you wish to cancel the auto scanning before the end, press the

or❷

☛ The VCR searches for the stations according to a preset

preference list corresponding to the country that you have selected.

Result

: A message appears, indicating that any channels

already preset on your VCR will be deleted.

Result

: ◆ The Please Wait indication highlight on the

◆ The first frequency band is scanned and the first

◆ The DVD-VCR then searches for the second station

◆ When the automatic scanning procedure has

➢ The number of stations automatically stored by the DVD-

VCR depends on the number of stations that it has found.

MENU button to exit the menu.

,❷

❿

to select this option.

or❷

❿

to select this option.

buttons to select your country.

television screen.

station found is displayed and stored.

and so on.

finished, the DVD-VCR switches automatically to programme 1.

❿ .

buttons to select the Install

buttons, until the Auto

Language : English

Install

User Set Auto Power Off : Off Screen Messages : On

VCR

➢ ◆ The time and date are set automatically from the

18 19

broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically. In this case, they should be set manually (see page 17).

◆ Once the auto scanning procedure has finished, some

stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 21).

Auto Setup

Manual Setup

Install

TV System : K VCR Output CH : CH 36

MANUAL TUNING

PR :

CH : - - -

MFT : -

DECODER : OFF

NAME : - - - -

MEMORY : OK

RETURN

TV STATION TABLE

PR CH NAME DEC

SWAPPING : OK DELETE : CLEAR RETURN

Auto Setup

Manual Setup

Install

TV System : K VCR Output CH : CH 36

PR CH NAME DEC

1 21

TV STATION TABLE

SWAPPING : OK DELETE : CLEAR RETURN

VCR

Language : English

Install

User Set Auto Power Off : Off Screen Messages : On

Presetting the Stations Manually

☛ You do not need to preset the stations manually if you

have already set them automatically.

1 After pressing the MENU, press the OK or

Result: The Setup menu is displayed.

2 Press the corresponding

option.

3 Press the OK or

Result

: The Install menu is displayed.

4 Press the corresponding

Setup option is selected.

5 Press the OK or

Result

: The TV STATION TABLE menu is displayed.

6 Press the

7 Press the

8 Press the

9 Press the

10 Press the

11 Press the

12 To change the programme’s name, press the



required.

Result

for the TV station, if necessary.

The station name is set automatically from the broadcast signal.

Result

or ❷buttons to select a programme number as

❿

button to preset the station.

: The MANUAL TUNING menu is displayed.

➛or❿

: The frequency band is scanned and the first station

found is displayed.

❷

❿

button to activate or deactivate use of the decoder

or❷

: The first letter of the name flashes.

13 To... Then...

Select a character Press the or❷button until the in the name required character is displayed

Move to the next or Press the ➛or ❿buttons previous character respectively.

14 If you... Then...

Wish to store the ◆ Press the or❷buttons until the MFT station displayed is selected.

Do not wish to ◆ Press the or ❷buttons until the CH store the station is selected. displayed

15 Repeat this procedure from Step 6 onwards, until all the required

stations have been stored.

16 On completion, press the RETURN button three times to exit the

menu.

,❷

❿

to select this option.



❿

to select a Manual Setup option.

buttons to start scanning channel.

button, until the DECODER is selected.

buttons until the NAME is selected.

◆ Press the

picture, if necessary.

◆ Press OK to store the station

◆ Press the

scanning the frequency band and display the next station

◆ Go back to the beginning of Step 14

❿ .

buttons to select the Install

or ❷buttons, until the Manual

❿

button.

(letters, numbers or “-” character).

➛or❿

buttons to adjust the

➛or❿

buttons to go on

Clearing a Preset Station

If you have stored a TV station:

◆ That you do not require

◆ At the wrong programme position

you can cancel it.

1 After pressing the MENU, press the OK or

Result: The Setup menu is displayed.

2 Press the corresponding

option.

3 Press the OK or

Result

:The Install menu is displayed.

4 Press the corresponding

Setup option is selected.

5 Press the OK or

Result

:The TV STATION TABLE menu is displayed.

6 Press the corresponding

preset TV station (PR) is selected.

,❷

❿

to select this option.



or ❷buttons, until the Manual

❿

to select a Manual Setup option.



or ❷buttons, until the required

7 Press the CLEAR button.

8 Repeat the same procedure from Step 6 onwards until all the

required stations have been cleared.

9 On completion, press the RETURN button four times to exit the

menu.

❿ .

buttons to select the Install

VCR

Language : English

Install

User Set Auto Power Off : Off Screen Messages : On

VCR

Auto Setup

Manual Setup TV System : K VCR Output CH : CH 36

Install

Auto Setup

Manual Setup

Install

TV System : K VCR Output CH : CH 36

Auto Setup

Manual Setup

Install

TV System : K VCR Output CH : CH 36

PR CH NAME DEC

1 21

- - - -

TV STATION TABLE

SWAPPING : OK DELETE : CLEAR RETURN

PR CH NAME DEC

3 21

- - - -

TV STATION TABLE

SWAPPING : OK DELETE : CLEAR RETURN

Changing the Preset Station Table

Selecting the RF OUT Sound Mode (B/G-D/K)

VCR

You can rearrange the Station Table and give different

Language : English

GB GB

Install

User Set Auto Power Off : Off Screen Messages : On

22 23

programme numbers to the stations listed according to your own preferences.

1 After pressing the MENU, press the OK or

Result: The Setup menu is displayed.

2 Press the corresponding

option.

3 Press the OK or

Result

: The Install menu is displayed.

4 Press the corresponding

Setup option is selected.

5 Press the OK or

Result

: The TV STATION TABLE menu is displayed.

6 Press the corresponding

preset TV programme is selected. Result

: The selected station is displayed at the same time on

the television screen.

7 To change the programme number assigned to a station press

the OK button on the remote control. (For example, To move a TV station in programme 1 to programme 3)

8 Press the

9 On completion, press the RETURN button four times to exit the



And then press OK again to swap the position.

or ❷buttons to select required position.

menu.

,❷

❿

buttons to select this option.

or❷

❿

button to select this option.

or❷

❿ .

buttons to select the Install

buttons, until the Manual

buttons, until the required

You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR.

1 After pressing the MENU, press the OK or

Result

: The Setup menu is displayed.

2 Press the corresponding

Install option.

3 Press the OK or

Result

:The Install menu is displayed.

4 Press the OK or

selected.

Press the

OK or ❿buttons to select G or K.

,❷

❿

to select this option.

❷

buttons, until the TV System option is

❿

or ➛, ❿buttons to select the

6 On completion, press RETURN to exit the menu.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.

1 After pressing the MENU, press the OK or

Result

: The Setup menu is displayed.

2 Press the corresponding

option.

3 Press the OK or

Result

: The Install menu is displayed.

4 Press the

5 Select the required output channel (CH21~CH69) by pressing

is selected.

the OK or

or❷

❿

buttons.

,❷

❿

to select this option.

buttons, until the VCR Output CH option

CH21 . . CH36 . . CH69

6 On completion, press RETURN to exit the menu.

Then tune your television again (see page 14).

❿

buttons to select the Install

Language : English

Install

User Set Auto Power Off : Off Screen Messages : On

VCR

Language : English

Install

User Set Auto Power Off : Off Screen Messages : On

CH 21

CH 36

CH 69

+ 25 hidden pages