Samsung SV-DVD940 User Manual
DVD-VCR
Kombigerät DVD-Player / Videorecorder
Magnétoscope Lecteur DVD
DVD-VCR
DVD/Video
SV-DVD940
PAL
DVD/VCRPROG
STANDBY/ON
REC
EZ VIEW
DVI VIDEO
OPEN/CLOSE
OPEN/CLOSE
STANDBY/ON
OK
Instruction Manual
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Gebruiksaanwijzing
F
I
NL
D
GB
www.samsungvcr.com
Deutsche Homepage: www.samsung.de
www.samsung.fr
PAL
2
GB
Contents
◆ FOREWORD
■ Safety Instructions................................................................................................................ 5
■ Disc Type and Characteristics ............................................................................................. 6
◆ DVD-VCR OVERVIEWS
■ Front View of the DVD-VCR................................................................................................. 7
■ Rear View of the DVD-VCR................................................................................................. 7
■ Infrared Remote Control....................................................................................................... 8
■ Display Indicators................................................................................................................. 9
■ Accessories.......................................................................................................................... 9
◆ CONNECTING
YOUR DVD-VCR
■ Deciding How to Connect DVD-VCR................................................................................... 10
■ Connecting DVD-VCR to the TV using the Coaxial Cable................................................... 11
■ Connecting DVD-VCR to the TV using the SCART Cable................................................... 11
■ Connecting DVD-VCR to a Satellite Receiver or Other Equipment..................................... 12
■ Plug & Auto Set Up .............................................................................................................. 13
■ Deck Control Keys ...............................................................................................................14
■ Basic TV Tuner Operations.................................................................................................. 15
■ Inserting Batteries in the Remote Control............................................................................ 16
■ Setting the Date and Time ................................................................................................... 16
■ Menu Language...................................................................................................................17
◆ SETTING UP YOUR DVD-VCR
■ Presetting the Stations Automatically................................................................................... 18
■ Presetting the Stations Manually.......................................................................................... 19
■ Clearing a Preset Station..................................................................................................... 20
■ Changing the Preset Station Table...................................................................................... 21
■ Selecting the Colour Mode................................................................................................... 22
■ NICAM.................................................................................................................................. 22
■ Intelligent Picture Control.....................................................................................................23
■ Intelligent Picture Control (Remote Control) ........................................................................ 23
■ ShowView Extend................................................................................................................ 24
■ Auto Power off...................................................................................................................... 25
■ Screen Messages ................................................................................................................ 25
■ Selecting the Cassette Type................................................................................................ 26
■ Repeat Play.......................................................................................................................... 26
■ S-VHS Play.......................................................................................................................... 27
3
GB
Contents
◆ RECORDING TELEVISION BROADCASTS
■ Selecting the Recording Speed................................................................................................ 27
■ Protecting a Recorded Cassette .............................................................................................. 28
■ Recording a Programme Immediately...................................................................................... 28
■ Recording a Programme with Automatic Stop ......................................................................... 29
■ Using the ShowView Feature................................................................................................... 30
■ Modifying ShowView Programming ......................................................................................... 31
■ Using the Timer Programming Feature.................................................................................... 32
■ Checking a Preset Recording .................................................................................................. 33
■ Cancelling a Preset Recording................................................................................................ 33
◆ PLAYING
BACK
■ Playing a Cassette ................................................................................................................... 34
■ Adjusting Picture Alignment Manually...................................................................................... 34
■ Selecting the Audio Output Mode ............................................................................................ 35
■ Playing a Cassette in Slow Motion........................................................................................... 35
■ Playing a Sequence Frame by Frame...................................................................................... 36
■ Playing a Sequence at Variable Speeds.................................................................................. 36
■ Searching for a Specific Sequence.......................................................................................... 37
■ Using the Tape Counter........................................................................................................... 39
■ Using the Assemble Edit Function ........................................................................................... 40
■ Recording from Another VCR or Camcorder ........................................................................... 40
◆ DVD FUNCTIONS
■ Using the TV Buttons on the Remote Control.......................................................................... 41
■ Choosing a Connection............................................................................................................ 42
■
Setting Up the Language Features
................................................................................................ 44
■
Setting Up the Audio Options
........................................................................................................ 46
■
Setting Up the Display Options
..................................................................................................... 47
■
Setting Up the Parental Control
.................................................................................................... 48
■
A/V Receiver Connections
........................................................................................................... 49
■
Special Playback Features
........................................................................................................... 50
■
Adjusting the Aspect Ratio (EZ View)
............................................................................................ 51
■
Using the Display Function
........................................................................................................... 53
■
Changing the Camera Angle
........................................................................................................ 54
■
Selecting the Subtitle Language
.................................................................................................... 54
■
Repeat Play
................................................................................................................................55
■
Selecting the Audio Language
...................................................................................................... 56
■
Using the Mark Function
.............................................................................................................. 57
■
MP3/WMA Play
........................................................................................................................... 59
■
Program Play & Random Play
...................................................................................................... 60
■
Picture CD Playback
.................................................................................................................... 61
4
GB
Contents (cont.)
◆ S
OLVING PROBLEMS
■ Technical Specifications...................................................................................................... 63
■ Problems and Solutions (VCR)............................................................................................ 64
■ Troubleshooting Guide (DVD)............................................................................................. 65
Symbols
1 1
☛
➢
Press/push
Hold down
= Step number
Important Note
1
This manuel is divided into two sections:
one describing the VCR; the other, the DVD.
Prior to undertaking anything, please verify in which section you actually are by
checking either the or symbols or the header of the chapter.
DVDVCR
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Safety Instructions
5
GB
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
HH
5°C
40°C
10% 75%
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
The following illustrations represent precautions.
6
GB
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
~
DIGITAL
SOUND
STEREO
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
etc.
• Dolby
Digital disc
• Digital
Audio disc
• Stereo
disc
• DTS disc
Disc Markings
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
Playback Region Number
PAL
12 Cm
8 Cm
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Audio
+
Video
Audio
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
AUDIO-CD
12 Cm
8 Cm
74 min.
20 min.
Disc Types
(Logos)
Recording
Types
Disc Size
Max.
Playing
Time
Characteristics
DVD
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
NTSC
7
GB
Front View of the DVD-VCR
VIDEO CASSETTE COMPARTMENT
PLAY/STILL BUTTON
EZ VIEW BUTTON
STOP BUTTON
REW /SKIP BACK
BUTTON
RECORD BUTTON
EJECT BUTTON
F.F / SKIP NEXT BUTTON
PROGRAMME SELECTION
BUTTON
OPEN/CLOSE
BUTTON
DVI SELECT BUTTON
DVD/VCR SELECT BUTTON
DVD DECK
STANDBY/ON BUTTON
Rear View of the DVD-VCR
DVI OUT JACK
COAXIAL
DIGITAL AUDIO OUT
LINE OUT
OPTICAL
S-VIDEO OUT
L
R
AUDIO
DVI OUT
AERIAL IN CONNECTOR
OUT TO TV CONNECTOR
AV2 (DEC./EXT.) SCART (EURO-21) SOCKET
AV1 (EURO AV) IN/OUT SCART
(EURO-21) SOCKET
AUDIO L, R OUT SOCKETS
AUDIO L, R OUT SOCKETS (DVD ONLY)
DIGITAL AUDIO OUT SOCKET
(COAXIAL)
VIDEO OUT SOCKET
S-VIDEO OUT JACK
DIGITAL AUDIO OUT SOCKET
(OPTICAL)
OPEN/CLOSE
REC
EZ VIEW
STANDBY/ON
DVD/VCRPROG
DVI VIDEO
8
GB
Infrared Remote Control
1 STANDBY/ON
2 SHUTTLE << / >>
3 CLEAR
4 DVD
5 TV MUTE. AUDIO
6 VOLUME +/–
7 REWIND
SKIP BACK
8 STOP
9 SUBTITLE
10 MENU
11 UP
12 LEFT
13 DOWN
14 SPEED
15 RECORD
16 TIMER
17 ANGLE
IPC
18 OPEN/CLOSE
19 0-9
20 TV/VCR
21 VCR, TV SELECT
22 INPUT SEL.
F.ADV/STEP
23 PROG
TRACKING
24 FAST-FORWARD
SKIP NEXT
25 PLAY/STILL
26 INFO.
27 RETURN
28 RIGHT
29 OK
30 EZ VIEW
31 DISC MENU
32 MARK
SEARCH
33 MODE
REPEAT
OPEN/CLOSE
STANDBY/ON
OK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Display Indicators
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
O
P
E
N
/
C
L
O
S
E
S
T
A
N
D
B
Y
/
O
N
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
1 2 3 4 5
6 7 8
1 The DVD Deck is active
2 A DVD, CD or SVCD is loaded
3 The time, counter position, time remaining or
current deck status is displayed
4 VHS tape is inserted
5 The VCR Deck is active
6 A DVD with a DTS soundtrack is loaded
7 The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
8 A Timer Recording is programmed or in progress.
9
GB
STEREO
10
GB
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
AV1 (EURO AV)
Rear SCART In/Out ◆ Television
◆ Satellite receiver
◆ Other VCR
AV2 IN Rear SCART In ◆ Satellite receiver
◆ Other VCR
Audio output Rear Audio RCA Out ◆ Audio out
VIDEO output Rear RCA Out ◆ Video out
S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only)
output
Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only)
output Coaxial
OUT TO TV Rear 75 Ω Out ◆ Television
coaxial
IN FROM ANT. Rear 75 Ω In ◆ Aerial
coaxial ◆ Cable television network
◆ Satellite receiver
DVI OUTPUT Rear DVI Out ◆ DVI video out (DVD only)
☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all
elements
are switched off
.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
S-VIDEO OUT
COAXIAL
OPTICAL
11
GB
LINE O
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting DVD-VCR to the TV using the SCART Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛ Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1 Remove the aerial or network input cable from the television.
2 Connect this cable to the 75Ω coaxial socket marked on
the rear of your DVD-VCR.
3 Plug the coaxial cable supplied into the socket on your
DVD-VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your television,
you can also connect your DVD-VCR to the television via the
SCART cable (see section below) if your television is equipped
with this type of connection.
TV
LINE OUT
L
R
3
2
O
You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched
off.
◆ Make sure that both the television and the DVD-VCR are switched off
before connecting the
cables.
1 Connect the coaxial cable as indicated in the above section.
2 Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.
3 Plug the other end into the appropriate connector on the television.
Aerial
SCART Cable
RF coaxial cable
2
3
TV
TV
4
LINE OUT
L
AUDIO
DI
R
C
12
GB
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Aerial
Aerial Connector
SCART Cable
RF coaxial cable
1
2
TV
Satellite Receiver or other Equipment
Aerial
Aerial Connector
SCART Cable
RF coaxial cable
1
2
TV
You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few
examples of the connection possibilities.
13
GB
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3 Select the required language by pressing the
or❷
buttons.
4 Press OK to store the language selected.
Result
: A message appears.
5 Press OK button.
6 Press the
or❷
buttons to select your country.
☛ The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
7 Press OK to start the auto scanning.
◆ The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
8 The current time and date are displayed automatically.
Check the date and time.
if it is :
◆
Correct, Press RETURN button twice to exit the menu.
◆
incorrect, see page 16.
➢ Auto preset can be performed by pressing
■
(STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
TV
Auto setup
Please wait
00 %
Clock Set
Time Date Year
12 : 00 1 / JAN / 2003 WED
2
LINE OUT
L
R
14
GB
Deck Control Keys
The DVD-VCR uses one set of controls to operate both decks.
The following keys are helpful in successfully controlling each
deck.
1
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to
show that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to
control the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to
show that VHS deck is selected.
4
INPUT SEL. BUTTON
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (PR##), AV1 (rear AV
input), AV2 (rear AV input).
• It is only available when VCR deck is selected.
➢ Before using the VCR operation of 18~42 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 43~62 pages, press
the DVD button on the remote control to select and
watch DVD.
STANDBY/ON
1
STANDBY/ON
1
2
3
4
15
GB
Basic TV Tuner Operations
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
1 TV/VCR Button
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
2 PROG Button
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 INFO.
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
1
2
2
3
4
OK
16
GB
Inserting Batteries in the Remote Control
Setting the Date and Time
You must insert or replace the batteries in the remote control
when you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA, RO3 or equivalent batteries, taking care to
respect the polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢ Do not mix different battery types (manganese and
alkaline for example).
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆ You purchase the DVD-VCR
☛
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automatically. In this case, they should be set manually.
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,❷
buttons to select the Clock
option.
3 Press the OK or
❿
to select this option.
Result
: The Clock Set menu is displayed.
4 Press
➛or❿
to select the hour, minutes, day, month and year.
Result: The option selected highlight.
5 Press the
or❷
buttons to increase or decrease the value.
Result
: The day of the week is displayed automatically.
➢ You can hold the
or❷
buttons down to scroll more
quickly through the values.
6 On completion, press RETURN to exit the menu.
Time Date Year
Clock Set
12 : 00 1 / JAN / 2003 WED
Auto Clock : On
1
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
17
GB
Setting the Menu Language
1 Open “MENU”
After pressing the MENU, press the OK or
❿ .
2 Select “Language”
Use the or❷buttons to highlight
“Language,” then press the OK or
❿ .
3 Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
4 Press the
or❷
buttons to select language you want.
Place the selection arrow next to your desired Language, then
press the OK button.
5 On completion, press RETURN to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Français
Deutsch
Español
Italiano
Nederlands
Language Set
English
OK
1
18
GB
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 19)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,❷
buttons to select the Install
option.
3 Press the OK or
❿
to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
or❷
buttons, until the Auto
Setup is selected.
And then press the OK or
❿
to select this option.
Result
: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5 Press the
or❷
buttons to select your country.
☛ The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
6 Press OK button.
Result
: A message appears, indicating that any channels
already preset on your VCR will be deleted.
7 Press OK to start the auto scanning.
Result
: ◆ The Please Wait indication highlight on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢ The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
8 If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
➢
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automatically. In this case, they should be set manually (see
page 16).
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
Auto Setup
Your date will be lost
Press OK to continue
Menu to exit
Auto Setup
Manual Setup
Install
COUNTRY SELECTION
A NL S PL
B I CH CZ
DK
N TR OTHERS
FIN P GR
D E HU
Auto Setup
Please Wait
15%
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
19
GB
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,❷
buttons to select the Install
option.
3 Press the OK or
❿
to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
or ❷buttons, until the Manual
Setup option is selected.
5 Press the OK or
❿
to select a Manual Setup option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the
or ❷buttons to select a programme number as
required.
7 Press the
❿
button to preset the station.
Result: The
MANUAL TUNING menu is displayed.
8 Press the
➛or❿
buttons to start scanning channel.
Result
: The frequency band is scanned and the first station
found is displayed.
9 Press the
❷
button, until the DECODER is selected.
10 Press the
❿
button to activate or deactivate use of the decoder
for the TV station, if necessary.
11 Press the
or❷
buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
12 To change the programme’s name, press the
❿
button.
Result
: The first letter of the name flashes.
13
To... Then...
Select a character Press the or❷button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the ➛or ❿buttons
previous character respectively.
14 If you... Then...
Wish to store the ◆ Press the or❷buttons until the MFT
station displayed is selected.
◆ Press the
➛or❿
buttons to adjust the
picture, if necessary.
◆ Press OK to store the station
Do not wish to ◆ Press the or ❷buttons until the CH
store the station is selected.
displayed ◆ Press the ➛or❿buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 14
15 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
16 On completion, press the RETURN button three times to exit the
menu.
Presetting the Stations Manually
Auto Setup
Manual Setup
Install
MANUAL TUNING
SYSTEM :
PR :
CH : - - -
MFT : DECODER : OFF
NAME : - - - -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH NAME DEC SYSTEM
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
20
GB
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,❷
buttons to select the Install
option.
3 Press the OK or
❿
to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
or ❷buttons, until the Manual
Setup option is selected.
5 Press the OK or
❿
to select a Manual Setup option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding
or ❷buttons, until the required
preset TV station (PR) is selected.
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button four times to exit the
menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV STATION TABLE
PR CH NAME DEC SYSTEM
1 21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
21
GB
Changing the Preset Station Table
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,❷
buttons to select the Install
option.
3 Press the OK or
❿
buttons to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
or❷
buttons, until the Manual
Setup option is selected.
5 Press the OK or
❿
button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding
or❷
buttons, until the required
preset TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8 Press the
or ❷buttons to select required position.
And then press OK again to swap the position.
9 On completion, press the RETURN button four times to exit the
menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV STATION TABLE
PR CH NAME DEC SYSTEM
1 21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
- - - -
TV STATION TABLE
PR CH NAME DEC SYSTEM
1
2
3 21
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
- - - -
Loading...