Samsung SV-150GS, SV-150G User Manual

Accessories

You have just purchased a Video Cassette Recorder. Together with your VCR, you will find the following accessories in the box.

1.5V

R E

S T

A N

D B

Y / O

D I S

P LA

NT.R

E S

IIP

O W

R EC

N U

REMOTE CONTROL BA

TTERIES “AA”

COAXIAL CABLE

ENGLISH

AC68-01823R

Only cassettes marked can be used with the VCR.

The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the unit itself has been turned off.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

You must insert or replace the batteries in the remote control when you:

◆ Purchase the video cassette Recorder

◆ Find that the remote control is no longer working correctly

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2 Insert two AA, R6 or equivalent batteries, taking care to respect the

polarities:

◆ + on the battery with + on the remote control

◆ – on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

➢ Do not mix different battery types (manganese and alkaline for

example).

Infrared Remote Control

Inserting Batteries in the Remote Control

◆ Make sure that both the television and the VCR are switched of

before connecting the cables.

Connecting Your VCR to the TV

Tuning Your Television for the VCR

Selecting the RF OUT Sound Mode (G, K)

You must tune your television for the VCR only if you are not using a RCA cable.

➢ To view pictures from your VCR when a RCA

cable is used, the television must be set to the audio/video mode (AV).

1 Switch on the television. 2

Switch on the VCR by pressing STANDBY/ON on the front of the VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television to be

reserved for use with your VCR.

Insert the video cassette in the VCR. Check that the VCR starts reading the cassette; if not, press ❿

button

5 Start a scan on your television or set the television to

UHF channel 36.

6 Fine tune the television until the pictures and sound

are obtained clearly.

If you cannot find the pictures and sound, or there is interference from nearby channels, change the VCR OUTPUT CHANNEL to adjust the frequency.

When the picture and sound are perfectly clear store this channel at the desired programme position on the television. Result: That programme is now reserved for use with

your VCR.

You must choose the sound mode (G or K) according to the TV set connected to your VCR.

1 Press MENU on the remote control.

Result

: The programming menu is displayed.

2 Press the corresponding or buttons, to select

the INSTALLATION option.

3 Press button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the corresponding or buttons, until the

cursor is placed in front of the TV SYSTEM option.

5 Press the

buttons to select G or K.

6 On completion, press MENU twice to exit the menu.

Then tune your television again.

Your VCR output channel may need to be changed if the pictures suffers from interference or if your TV cannot find the pictures. Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen.

1 Press MENU on the remote control.

Result

: The programming menu is displayed.

2 Press the corresponding

or buttons, to select

the INSTALLATION option.

3 And then press button to select this option.

Result

: The INSTALLATION menu is displayed.

4 Press the

buttons, until the cursor is placed

in front of the VCR OUTPUT CH option.

5 Select the required output channel (CH21~CH69) by

pressing the or buttons.

6 On completion, press MENU twice to exit the menu.

Then tune your television again.

Setting the VCR Output Channel

Playing a Cassette

Selecting the Appropriate System Standard

This function allows you to play back any pre-recorded cassette.

Switch on both the television and your VCR.

Select the AV input on the television for use with your VCR.

Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿ button. Otherwise, the cassette is played automatically.

➢ When a cassette is loaded, the tape position is

optimized automatically to reduce disturbance

(Digital Auto Tracking). When playing a cassette, if

the end of the tape is reached, the cassette is

rewound automatically.

To... Then press...

Stop the playback (STOP). Eject the cassette (EJECT).

Adjusting Picture Alignment Manually

The Fine Adjustment feature allows you to adjust the alignment manually to obtain the best possible picture.

When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK ( or ) buttons until the picture is clear and stable. Result

: ◆ The tracking bar appears.

◆ The image is adjusted.

◆ The tracking bar disappears when you

release the button.

Intelligent Picture Control

Before recording a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO.

➢

◆ When playing back a cassette, the standard is

automatically selected by the VCR.

◆

When you playback an NTSC-recorded tape on this VCR make a setting on the color system according

to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1 Press MENU on the remote control.

Result

: The programming menu is displayed.

Press the corresponding

or buttons, to select

the USER SET option.

Press the button to select this option. Result

: The USER SET menu is displayed.

Press the corresponding or buttons, until the cursor is placed in front of the COLOUR SYSTEM option.

Press the button to select AUTO ➞ PAL ➞ MESECAM ➞ B/W or NT4.43 ➞ NTPB.

AUTO When playing back a cassette, the system

standard is automatically selected by the VCR.

B/W Black and White

On completion, press MENU twice to exit the menu.

STANDBY/ON BUTTON

COUNTER RESET BUTTON

PAUSE/STILL BUTTON

RECORD BUTTON

PLAYBUTTON

(INTERVALREPEAT BUTTON)

(MENU SELECTION UP BUTTON)

REWIND/REVERSE PICTURE

SEARCH BUTTON

(MENU SELECTION BUTTON)

STOP BUTTON

(MENU SELECTION DOWN BUTTON)

DISPLAYBUTTON

RECORDING SPEED SELECTION BUTTON

TRACKING BUTTONS

IPC (INTELLIGENT PICTURE CONTROL) BUTTON

MENU BUTTON

FAST-FORWARD/FORWARD SEARCH BUTTON (MENU SELECTION BUTTON)

To adjust the sharpness manually, press the

button

to turn the IPC mode OFF.

Press the or buttons until the picture is displayed according to your preferences. To adjust the sharpness manually press the SHARPNESS▲or▼button on the front of the VCR.

➢ If you do not press a button within ten seconds, the

PICTURE menu disappears automatically.

On completion, press the MENU button again.

Intelligent picture control feature allows you to adjust the sharpness of the image automatically according to your own preferences.

During playback, press the MENU button on the remote control. Result: The menu is displayed.

Press the corresponding

or buttons, to select

the

USER SET option.

Press the button to select this option. Result: The USER SET menu is displayed.

Press the corresponding or buttons, until the cursor is placed in front of the IPC option.

Press the button to select the IPC (intelligent picture control) option.

Press the IPC button on the remote control. Result

: The PICTURE menu appears on the display.

➢When intelligent picture control mode is ON, the

sharpness of the image is adjusted automatically.

LINE IN 1

VIDEO AUDIO

LINE OUT

AV Output

Aerial (Not supplied)

TV Set (Not supplied)

➀ Aerial Connector

Aerial input

➀ Coaxial Cable

➁ RCA Cable (Not supplied)

AV input

OWNER’S MANUAL

Video Cassette Recorder (VCR)

- Line Recorder

SV-150G/SV-150GS

I I

REC

EJECT

STANDBY/ON

STOP I I P/S

PLAY

REW

F.F

SHARPNESS

STANDBY/ON DISPLAY

CNT.RESET SPEED

IIP/S IPC

REC MENU

TRK

Playing a Sequence Frame by Frame

You can:

◆ Stop the cassette at a given frame (image)

◆ Advance one frame at a time

➢

No sound is heard when playing back frame by frame.

Press:

◆ ❿ to start playing the cassette

◆

IIP/S

to stop the tape at a given frame

◆

IIP/S

to advance frame by frame

To return to normal playback, press ❿.

☛

When you have been using the Frame-by-Frame function for more than about five minutes, the VCR will automatically play to protect the cassette and video heads.

➢ Vertical stability:When playing back frame by

frame, interference may be seen on the screen. Press the TRK ( or ) buttons to minimize this effect.

Using the Tape Counter Selecting the Cassette Type

If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

1 Press MENU on the remote control.

Result: The menu is displayed.

Press the

or buttons, to select the USER SET

option.

3 Press the button to select this option.

Result: The USER SET menu is displayed.

4 Press the or buttons, until the cursor is placed in

front of the TAPE SELECT option.

5 Press the or buttons as many times as required,

until the correct cassette length is displayed.

E180 E240 E 300 E260

6 Press MENU twice to exit the menu.

Auto Power Off

The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not press any button for the selected time.

Press MENU on the remote control. Result

: The menu is displayed.

Press the corresponding

or buttons, to select the

EASY OPERATION option.

Press the button to select this option. Result: The EASY OPERATION menu is displayed.

Press the corresponding or buttons, until the cursor is placed in front of the

AUTO POWER OFF option.

Press the button, until you select the time of Auto Power off interval.

OFF 2HOUR 3HOUR

6 On completion, press MENU twice to exit the menu.

Interval Repeat Play

You can set interval repeat play to repeat the cassette several times for special interval.

Press MENU on the remote control. Result: The menu is displayed.

Press the corresponding

or buttons, to select the

EASY OPERATION option.

Press the button to select this option. Result: The EASY OPERATION menu is displayed.

Press the corresponding or buttons, until the cursor is placed in front of the NO. OF INTERVAL REPEAT option.

To... Press , until...

Interval repeat play 5, 10, 15, off is displayed.

(choose repeat time 5 times, 10 times, 15 times)

Cancel interval OFF is displayed. repeat play

On completion, press MENU twice to exit the menu.

To select interval during playback, press the REPEAT button at the desired start point. Result

: “INTERVAL REPEAT SETTING” is displayed. Press the REPEAT button one more time at the desired end point. Result

: The tape is automatically rewound to the start

point. “INTERVAL REPEAT” is displayed.

Displaying/Hiding On-Screen Information

Your VCR displays most information both on the VCR and the television. You can choose to display or hide this information on the television screen.

Press MENU on the remote control. Result

: The programming menu is displayed.

Press the corresponding

or buttons, to select the

USER SET option.

Press the button to select this option. Result: The USER SET menu is displayed.

Press the corresponding or buttons, until the cursor is placed in front of the OSD option.

To... Press or , until...

Display on-screen ON is displayed. information

Hide on-screen OFF is displayed. information

On completion, press MENU twice to exit the menu.

Auto Repeat Play

You can set repeat play to repeat the tape continuously from beginning to end.

Press MENU on the remote control. Result

: The programming menu is displayed.

Press the corresponding

or buttons, to select the

EASY OPERATION option.

Press the button to select this option. Result

: The EASY OPERATION menu is displayed.

Press the corresponding or buttons, until the cursor is placed in front of the REPEAT PLAY option.

To... Press or , until...

Repeat play ON is displayed. Do not wish to OFF is displayed.

repeat play

On completion, press MENU twice to exit the menu.

Recording from Another VCR

Turn on the TV. Tune your TV channel.

Connect your VCR to the TV by A/V cable as above figure.

Select the recording speed (SP/LP) by pressing the SPEED button.

Hold down the REC (●) button to start line recording.

Press the STOP (■) button to end line recording.

➢ Line recording is not available for

the TV which has no A/V OUTPUT JACK.

You can copy a cassette to your VCR from another video source, such as another VCR.

☛

It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

➢ Video cassettes have a safety tab to prevent accidental erasure. When this tab has been

removed, you cannot record on the tape.

◆ If you wish to protect a cassette, break off the tab using a small screwdriver.

◆ To re-record over a protected cassette (safety tab broken), cover the hole with adhesive

tape.

Turn on the TV.

Connect the playback side VCR’s A/V cable to the recording side VCR’s video and audio in (rear panel).

Select the recording speed (SP/LP) by pressing the SPEED button.

Begin playback on the playback side VCR and hold down REC (●) button.

Press the STOP (■) button to end line recording.

Format VHS PALstandard Heads Video: 2 rotary heads / Audio/Control: 1 stationary head

Erase: 1 full track erase head Television system STANDARD G, K Luminance FM azimuth recording Colour system PAL/MESECAM/NT4.43: Down converted subcarrier phase shifted direct

recording

NTSC PB on PALTV Tape speed (PAL/MESECAM) (NTSC)

SP: 23.39 mm/sec SP: 33.35 mm/sec

LP: 11.69 mm/sec SLP: 11.12 mm/sec Recording/playback time SP: 3 hours (E-180 Tape)

LP: 6 hours (E-180 Tape) REW time About 60 sec in REW with E-180

VIDEO

Input 0.5 to 2.0 Vp-p; 75 ohm unbalanced Output 1.0 ± 0.2 Vp-p; 75 ohm unbalanced

AUDIO

Input -8 dBm, 47 Kohm unbalanced Output -8 ± 3 dBm, 1 Kohm unbalanced Frequency response 100Hz - 8KHz

Power requirement 110-240V~50/60 Hz Power consumption Approx. 13 watts Operation temperature 41°F-104°F (5°C-40°C) Operation humidity 10%-75% Weight 2.8 Kg (net) Dimensions (WxHxD) 360 x 94 x 240 mm

Design and specifications are subject to change without notice.

Technical SpecificationsRecording From TV

LINE IN 1

VIDEO AUDIO

LINE OUT

AUDIO OUT VIDEO OUT

RF OUT

VIDEO IN AUDIO IN

ANTENNA IN

LINE IN 1

VIDEO AUDIO

LINE OUT

L H

OFF

OUT TO TV

V IDEO OUT

TEST

AUDIO OUT

IN FROM ANT.

ATT

VCR

RF OUT

VIDEO IN AUDIO IN

VIDEO OUT AUDIO OUT

ANTENNA IN

The tape counter:

◆ Indicates the elapsed time in the play and record

modes

◆ Is reset when a cassette is inserted in the VCR

◆

Allows you to find the beginning of a sequence easily

☛

If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1 Insert a cassette in your VCR. 2 Press DISPLAY.

➢

The tape counter does not necessarily start from zero at the beginning of the tape.

3 To set the tape counter to zero at the beginning of a

sequence:

◆ Press DISPLAY twice to display the counter

◆ Press CNT.RESET when you want to set the tape

counter to zero

When you are ready,

◆

Start playback or Recording.

◆

Press the ■button.

◆

To fast-forward or rewind to the sequence at which

the counter was set to zero, press ➛➛or ❿❿.

Result: The VCR stops automatically when the counter

reaches zero.

➢Some VCR information, such as the counter, can

be displayed on the television screen.

Press DISPLAY:

◆ Once to display the current function, recording speed and counter

◆ Twice to display the counter only

◆ Three times to display the time remaining on the

cassette

◆ Four times to clear the display

ype Recording Time (in SP) E-180 180 mins. or 3 hours E-240 240 mins. or 4 hours E-260 260 mins. or 4 hours and 20 mins. E-300 300 mins. or 5 hours

Selecting the Recording Speed

You can record a cassette at two different speeds:

◆ SP (Standard Play)

◆ LP (Long Play)

In Long Play modes:

◆ Each cassette lasts twice as long

◆ The recording is of a slightly lower quality

To record a cassette... Press the SPEED button on the

remote control, until...

In standard play mode SP is displayed. In long play mode LP is displayed.