Samsung SPP-R200 User Manual

User's Manual

SPP-R200

Mobile Printer Rev. 1.01

http://www.samsungminiprinters.com

SPP-R200

■ Table of Contents

※ Manual Information & Usage Precautions························································3

1. Content Confimration························································································10

2. Product Part Names··························································································11

3. Installation & Usage ··························································································12

3-1 Battery Installation·····················································································12 3-2 Battery Charging ·······················································································12 3-3 Battery Holder (Optional) Usage······························································· 13 3-4 Cigarette Lighter Jack Charger (Usage) Usage········································13 3-5 Paper Installation ······················································································14 3-6 Belt Strap Usage······················································································· 15 3-7 Leather Case (Optional) Usage ································································16 3-8 Control Panel Usage················································································· 17 3-9 MSR Usage·······························································································18

4. Self-Test··············································································································18

5. Peripherals Connection····················································································20

5-1 Bluetooth Connection················································································ 20 5-2 Interface Cable Connection ······································································20

6. Printer Cleaning·································································································21

7. Appendix ············································································································22

7-1 Specifications····························································································22 7-2 Certification ·······························································································23 7-3 Label Types·······························································································23

Rev. 1.01

- 2 -

SPP-R200

■ Manual Information

※ Manual Information & Usage Precautions

This user manual contains basic information for product usage as well as for emergency measures that may be required.

※ The following separate manuals provide more detailed content on various technological

issues and areas.

1. Windows CE Module Program Manual

This manual provides information on the dll files required for Windows CE application program development.

2. Windows Driver Manual

This manual provides information on installation and main functions of the Windows Driver for this product.

3. Unified Utility Manual

This manual provides information on the software used to select functions of this product, modify operation conditions, etc.

• VMSM (Virtual Memory Switch Manager) : As a function that sets the basic operation conditions of the product, the use o

non-hardware control, software-based virtual switches is explained.

• NV Image Download Manager : The downloading of image files, such as logos, intended for repetitive printing is

explained.

• Firmware Download Manager : The downloading and installation of the latest Firmware, which is subject to

ongoing modification for the enhancement of product performance, are explained.

4. Bluetooth Connection Manual

This manual provides information on the connection of this product with devices equipped with Bluetooth functionality (PDAs, PCs, etc.). The devices included are as follows.

• PDAs:

- Intermec PDA (Device: CN2B, OS: Pocket PC 4.20.0)

- SYMBOL PDA (Device: SYMBOL MC70, OS: Windows Mobile 5.0)

- HP PDA (Device: iPAQ hx2700, OS: Windows Mobile 5.1.1702)

- Mobile Compia PDA (Device: M3, OS: WinCE 5.0)

- InnoTeletek PDA (Device: MC3000, OS: WinCE 4.2)

• Bluetooth Dongle (BlueSoleil IVT Stack)

5. Commands Manual

This manual provides information on the protocol and functions of the control commands that can be used with this product.

6. Code Pages Manual

This manual provides information on each character code page that can be used with this product.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice.

Rev. 1.01

- 3 -

SPP-R200

■ Safety Precautions

In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not plug several products in one multi-outlet.

• This can provoke over-heating and a fire.

• If the plug is wet or dirty, dry or wipe it before usage.

• If the plug does not fit perfectly with the outlet, do not plug in.

• Be sure to use only standardized multi-outlets.

PROHIBIT

Do not pull the cable to unplug.

• This can damage the cable, which is the origin of a fire or a breakdown of the printer.

PROHIBIT

You must use only the supplied adapter.

• It is dangerous to use other adapters.

ONLY SUPPLIED ADAPTER

PROHIBIT

Keep the plastic bag out of children’s reach.

• If not, a child may put the bag on his head.

PROHIBIT

Do not plug in or unplug with your hands wet.

• You can be electrocuted.

PROHIBIT

Rev. 1.01

Do not bend the cable by force or leave it under any heavy object.

• A damaged cable can cause a fire.

PROHIBIT

- 4 -

SPP-R200

CAUTION

Violating following instructions can cause slight wound or damage the appliance

If you observe a strange smoke, odor or noise from the printer, unplug it before taking following measures.

• Switch off the printer and unplug the set from the mains.

• After the disappearance of the smoke, call your dealer to repair it.

TO UNPLUG

PRINTER

Install the printer on the stable surface.

• If the printer falls down, it can be broken and you can hurt yourself.

PRINTER

PROHIBIT

Keep the desiccant out of children’s reach.

• If not, they may eat it.

PROHIBIT

Use only approved accessories and do not try to disassemble, repair or remodel it for yourself.

• Call your dealer when you need these services.

• Do not touch the blade of auto cutter.

DISASSEMBLING

PROHIBITED

PRINTER

Do not let water or other foreign objects in the printer.

• If this happened, switch off and unplug the printer before calling your dealer.

PROHIBIT

PRINTER

Rev. 1.01

Do not use the printer when it is out of order. This can cause a fire or an electrocution.

• Switch off and unplug the printer before calling your dealer.

TO UNPLUG

PRINTER

DEALER

- 5 -

SPP-R200

■ Battery Safety Precautions

Make sure to review the user manual carefully prior to product use.

Neglecting to heed the following instructions can result in battery overheating, combustion, explosion, damage and/or decline in performance and product life.

Danger

1. Do not allow water, seawater, etc. enter or leak into the battery interior. If the safety mechanism within the battery becomes burned out, any charging of the battery can result in abnormal electrical current flow and/or voltage that causes an abnormal chemical reaction, which may then cause the battery to overheat, ignite, and/or explode.

2. Do not use or leave the battery in a location exposed to high temperatures, such as next to a stove, etc. Excessive heat exposure can cause damage to the resin case and/or insulating materials, thus causing short circuits within the battery that may result in battery overheating, combustion, and/or explosion.

3. When charging the battery, use the exclusive charger or follow the charging requirements outlined by BIXOLON. Charging under conditions not included in such requirements (higher temperature, higher voltage/larger electrical current, use of a modified charger, etc.) can result in excessive battery charging and abnormal electrical current flow and/or voltage that causes an abnormal chemical reaction, which may then cause the battery to overheat, ignite, and/or explode.

4. The battery has clearly delineated plus and minus poles. When inserting the battery into the charger and/or product, make sure to confirm that the battery is properly aligned. Reverse insertion will cause reverse charging that can result in an abnormal chemical reaction, which may then cause the battery to overheat, ignite, and/or explode.

5. Do not place the battery in contact with an electrical power outlet and/or an automobile cigarette lighter jack. Doing so can inflict high voltage that causes excessive electrical current flow, resulting in battery overheating, combustion, and/or explosion.

6. Do not heat the battery or place it in a fire. Doing so can melt the insulating materials and/or damage the safety mechanism or safety equipment, allowing the electrolytic solution to ignite and resulting in battery overheating, combustion, and/or explosion.

7. Do not use the battery in reverse (+) and (-) alignment. Doing so during charging will cause reverse charging that can result in an abnormal chemical reaction. During use, unpredictable electrical current abnormalities can arise, causing battery overheating, combustion, and/or explosion.

8. Do not allow the battery’s (+) and (-) poles to come into contact with any metals. In addition, do not carry or store the battery together with metal items, such as necklaces, hairpins, etc. Resulting short circuits within the battery can cause excessive electrical current flow, resulting in battery overheating, combustion, and/or explosion as well as potential overheating of the adjacent metal items (necklaces, hairpins, etc.).

9. Do not throw the battery or subject it to heavy shock. If the safety mechanism within the battery becomes burned out, any charging of the battery can result in abnormal electrical current flow and/or voltage that causes an abnormal chemical reaction, which may then cause the battery to overheat, ignite, and/or explode.

Rev. 1.01

- 6 -

SPP-R200

10. Do not pierce the battery with a sharp object, such as a nail, or hit it with a heavy object, such as a hammer, and take care not to step on the battery. The battery may rupture or become warped, causing short circuits within that may result in battery overheating, combustion, and/or explosion.

11. Do not solder the battery directly. The heat can melt the insulating materials and/or

damage the safety mechanism or safety equipment, resulting in battery overheating, combustion, and/or explosion.

12. Do not disassemble and/or modify the battery. The battery contains safety equipment

and a safety mechanism to prevent danger. Any damage to these components can cause battery overheating, combustion, and/or explosion.

13. Do not charge near a source of heat and/or under direct sunlight. Exposure to high

temperatures causes the safety mechanism to activate, thus making charging impossible. In addition, any damage to the safety mechanism itself that may be caused by excessive heat can cause any charging of the battery to result in abnormal electrical current flow and/or voltage that causes an abnormal chemical reaction within the battery and/or battery overheating, combustion, and/or explosion.

Warning

1. Do not place the battery within the reach of small children to prevent any swallowing accidents. If a small child has swallowed the battery, consult a physician immediately.

2. Do not place the battery in a microwave oven and/or high voltage appliance. Doing so can cause rapid overheating and/or destruction of the sealing, resulting in battery overheating, combustion, and/or explosion.

3. Do not combine and use any battery of different capacity and/or type with the primary battery. Doing so can cause excessive electrical discharge during use or excessive charging during charging, resulting in an abnormal chemical reaction within the battery that can cause battery overheating, combustion, and/or explosion.

4. If during battery usage, storage, or charging, a strange odor or conditions differing from the normal, such as overheating, color changes, warping, etc., are detected, remove the battery from the product or charger and discontinue use. Continued use may cause battery overheating, combustion, and/or explosion.

5. When recharging, if the battery is not charged after the normal fixed charging time, discontinue charging. Continued charging can result in battery overheating, combustion, and/or explosion.

6. If the battery appears to be coated with condensation or emits a strange odor, immediately place it far away from any heat source. The condensation may be caused by a leak of electrolytic solution that can ignite to cause battery combustion and/or explosion.

7. If the battery is leaking electrolytic solution and any of the solution enters the eyes, immediately wash out with clean water, and then consult a physician to receive treatment. Neglecting to do so can cause permanent eye injuries.

Rev. 1.01

- 7 -

+ 16 hidden pages