Samsung SNC-B2331P User Manual

Network Camera

User Manual

SNC-B2331(P)

imagine the possibilities

Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www.samsungsecurity.com

RoHS compliant

Our product complies with “The Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment”, and we do not use the 6 hazardous materials- Cadmium (Cd), Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr Diphenyl Ethers (PBDEs)- in our products.

), Poly Brominated Biphenyls (PBBs), Poly Brominated

overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of ﬁ re or electric shock, do not expose this appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the ﬂ oor/wall in accordance with the installation instructions.

If this power supply is used at 24V ac, a suitable plug adapter should be used.

The camera is to be only connected to PoE networks without routing to the outside plant.

WARNING

Be sure to use only the standard adapter that is speciﬁ ed in the speciﬁ cation sheet.

Using any other adapter could cause ﬁ re, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, ﬁ re,

electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

abnormal heat generation or ﬁ re.

Securely plug the power cord into the power receptacle. Insecure connection may

cause ﬁ re.

When installing the camera, fasten it securely and ﬁ rmly. The fall of camera may cause

personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or

containers ﬁ lled with water on top of the camera. Doing so may cause personal injury due to ﬁ re, electric shock, or falling objects.

2_ overview

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause ﬁ re or

electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In such

case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause ﬁ re or electric shock.

If this product fails to operate normally, contact the nearest service center. Never

disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modiﬁ cations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. Doing so may

10.

cause ﬁ re or electric shock

Do not expose the product to the direct airﬂ ow from an air conditioner.

11.

Otherwise, it may cause moisture condensation inside the Clear Dome due to temperature difference between internal and external of the dome camera.

If you install this product in a low-temp area such as inside a cold store, you must seal

12.

up the wiring pipe with silicon, so that the external air can not ﬂ ow inside the housing. Otherwise, external high, humid air may ﬂ ow inside the housing, pooling moisture or vapor inside the product due to a difference between internal and external temperature.

● OVERVIEW

English _3

overview

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a

location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause ﬁ re or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause ﬁ re or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁ re.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10.

When using the camera outdoors, moisture may occur inside the camera due to temperature difference between indoors and outdoors. For this reason, it is recommended to install the camera indoors. For outdoor use, use the camera with builtin fan and heater.

4_ overview

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.

● OVERVIEW

English _5

overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

10.

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

11.

Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by

12.

the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

13.

long periods of time.

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the

14.

apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

6_ overview

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus

CONTENTS

OVERVIEW

INSTALLATION & CONNECTION

CAMERA SETUP

NETWORK CONNECTION

AND SETUP

6 important safety instructions 9 Product Features 9 Recommended PC Speciﬁ cations 10 What’s Included 11 At a Glance

13 Mounting the lens 15 Connecting with other Device

17 How to use the keyboard

controller

18 Main Menu 18 Proﬁ le 19 Camera Setup 23 Privacy Zone 24 Others 25 System Info 25 Language

26 Connecting the Camera to an

IP Router With The xDSL/Cable Modem

27 Connecting the Camera to

an IP Router With Local Area Networking

28 Connecting the Camera Directly

to a DHCP-Based xDSL/Cable Modem

29 Connecting the Camera Directly

to Local Area Networking

30 IP Address Setup 31 Static IP Setup 34 Dynamic IP Setup 35 Port Range Forward (Port

Mapping) Setup

35 Connecting to the camera from a

shared local PC

36 Connecting to the camera from a

remote PC via the Internet

● OVERVIEW

English _7

overview

WEB VIEWER

SETUP SCREEN

APPENDIX

37 Connecting to the camera 38 Login 39 Installing ActiveX 40 Using the Live Screen 41 Backup

43 Accessing the Setup screen 44 Default Setup 48 System Setup 51 Overlay Setup 52 Event Setup 57 Network Setup

59 Proﬁ le 60 Terminology 61 Speciﬁ cations 65 Frame Rate (NTSC) 71 Frame Rate (PAL) 77 Troubleshooting

8_ overview

PRODUCT FEATURES

Support various communication protocols

Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various internet protocols such as ARP, HTTP, HTTPS and DHCP.

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

Automatic Local IP Setup

Even a network novice can install it with minimum operations.

Alarm

If the camera equipped with an alarm sensor senses any motion, it will send a notiﬁ cation to a user FTP/email account (SMTP) or send the corresponding signal to the Alarm Out terminal.

Motion Detection

If the camera with a speciﬁ ed motion area detects a motion in that area, it will send a notiﬁ cation to a user FTP/email account (SMTP) or send the corresponding signal to the Alarm Out terminal.

RECOMMENDED PC SPECIFICATIONS

CPU : Pentium4 / 2.4GHz or higher

Operating System : Windows XP(Service Pack2, Service Pack3) / Windows Vista

Resolution : 1024X768 pixels or higher

RAM : 512MB or higher

Web Browser : Internet Explorer 6.0 or higher

Video Card : Radeon, Nvidia

Video Memory: 128MB

DirectX 8.1 or higher

Compatible IP Routers

Linksys

D-Link

Netgear

Compatible PoE Switches

Linksys SRW224G4P

D-Link DES-1316

SMC SMCPWR-INJ3

● OVERVIEW

English _9

overview

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera C Mount Adaptor

User Manual/

IP INSTALLER CD

Lens Options

CS Lens C Lens

Camera Holder (Mount)

& Screws (2EA)

User Manual

10_ overview

AT A GLANCE

Front Side

Item Description

● OVERVIEW

Camera Holder (Mount) Holes

Auto Iris Lens (Optional)

Auto Iris Lens Connector



Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied

ethanol.

Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket.

Installed on the lens adaptor.

Used to supply power and output signal to control the iris of the lens.

English _11

overview

Rear Side

VIDEO

1 2 3 4 5

SYSTEM POWER

RESET

NETWORK

Video Out Port Video signal output port connected to the monitor.

System, Power Indicators

Reset Button

Power Port Used to plug the power cable.

Network Port Used to connect to the Network cable.

I/O Port

12_ overview

1,2 : ALARM IN 1,2 3 : GND 4,5 : ALARM OUT 1,2

ACT

LINK

AC 24V DC 12V

GND

Item Description

ON: The camera is turned on and connected to the network properly.

SYSTEM

Blinking: During DDNS setup, or in case of setup failure, or in a state of unstable network connection

OFF: When the system is rebooting, or turned off

POWER

ON: While the power is on OFF: If the power is off

Resets the camera settings to the default. Press and hold it for about 3 seconds to turn off the system indicator and restart the system.

ALARM IN 1,2

Used to connect the alarm input signal.

GND Used for earth-grounding.

ALARM OUT 1,2

Used to connect the alarm output signal.

installation & connection

MOUNTING THE LENS

Disconnect the power before proceeding.

Mounting the CS lens

Turn the optional CS lens clockwise to insert it.

Mounting the C lens

Turn the C mount adaptor clockwise to insert it and do the same with the C lens.

● INSTALLATION & CONNECTION

CS Lens

C Lens

English _13

installation & connection

Connecting the Auto Iris Lens connector

Insert the lens connector into the corresponding hole of the camera.

Focusing

Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.

14_ installation & connection

CONNECTING WITH OTHER DEVICE

Monitor

1 2 3 4 5

1,2 : ALARM IN 1,2 3 : GND 4,5 : ALARM OUT 1,2

SYSTEM POWER

NETWORK

ACT

RESET

LINK

AC 24V DC 12V

GND

VIDEO

Power

Network

Connecting to the monitor

Connect the [VIDEO] port of the camera to the video input port of the monitor.

Network Connection

Connect the Network cable to the local network or to the Internet.

Power Supply

Use the screwdriver to connect each line of the power cable to the corresponding port of the camera.

Be careful not to reverse the polarity when you connect the power cable.



You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.

● INSTALLATION & CONNECTION

English _15

installation & connection

Connecting to the I/O port box

Connect the Alarm I/O signal to the corresponding port of the rear port box.

1 2 3 4 5

VIDEO

1 2 3 4 5

1,2 : ALARM IN 1,2 3 : GND 4,5 : ALARM OUT 1,2

ALARM IN 1, 2 : Used to connect the alarm input signal.

GND : Used for earth-grounding.

ALARM OUT 1, 2 : Used to connect the alarm output signal.

1,2 : ALARM IN 1,2 3 : GND 4,5 : ALARM OUT 1,2

Alarm I/O Wiring Diagram

External Relay

ALARM IN 1

ALARM IN 2

ALARM OUT 1

ALARM OUT 2

GND

SYSTEM POWER

NETWORK

ACT

GND

LINK

RESET

AC 24V DC 12V

16_ installation & connection

camera setup

You can configure the camera settings using the Web Viewer.

For accessing the Web Viewer, refer to "Network Connection and Setup". (page 26)



HOW TO USE THE KEYBOARD CONTROLLER

Follow the steps below if you run the Web Viewer for setting the menus.

Launch the Web Viewer.

From the [Camera OSD] menu in the left

pane, click [Menu]. The <MAIN MENU> screen appears.

Click the Up/Down (▲▼) buttons to move to a

desired item.

Click

the four direction (

To change the value of a selected item, click the Left/Right (

Click [

Your changes will be applied.

: Exits the menu setup screen.

Before exiting the setup screen, select [SAVE] to save your settings, or [QUIT] to cancel them.

: Saves your settings and returns to the previous screen.

: Returns to the main menu.

: Use this icon if you want to save your settings after you specified the mask area and

privacy area, etc. Once you saved your settings, the changes remain intact even if you select [QUIT] on exit.

: Use this icon if you want to delete a mask, or privacy area, etc.

Once you deleted your settings, the deletions remain valid even if you select [QUIT] on exit.

: This arrow appears next to a menu that contains sub items.

▲▼◄ ►

) buttons to navigate through the menu items.

◄ ►

) buttons.

● CAMERA SETUP

For the items with the "*" mark on the right, You can get help from "Terminology". (page 60)

English _17

camera setup

MAIN M ENU

CAMERA SET

PRIVACY ZONE

OTHER S ET

SYSTEM INFO

LANGUAG E

STANDARD

ITS

BACKLIG HT

DAY/NIGHT

GAMING

CUSTOM

MAIN MENU

You can configure the camera settings to your preference.

PROFILE

You can select a mode that is appropriate to the camera installation environment.

CAMERA SET

Conﬁ gure the camera functions and settings.

PRIVACY ZONE

You can conﬁ gure the privacy settings.

OTHER SET

You can conﬁ gure more settings including FACTORY DEFAULTS.

SYSTEM INFO

Shows the camera version and type.

LANGUAGE

Select a preferred one from the supported languages.

PROFILE

You can select one from the pre-determined modes as appropriate to your specific camera installation environment.

Your selection on each item in PROFILE will affect all other settings of the camera. For the setting, refer to "PROFILE". (page 59)

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

STANDARD

Automatically optimizes the camera settings to the normal environment.

ITS

This setting enables you to analyze the trafﬁ c situation and take the trafﬁ c information at a glance.

BACKLIGHT

This setting enables you to view a sharp background and object even in a severe backlight scene.

DAY/NIGHT

Automatically optimizes the camera settings to the day and night scene.

GAMING

This automatically conﬁ gures the settings so that you can work in a stable illumination condition as indoors.

CUSTOM

Your change to any of the PROFILE settings will switch the display to CUSTOM.

18_ camera setup

MAIN MENU

PROFILE

CAMERA SET

PRIVACY ZONE

OTHER SET

SYSTEM INFO

LANGUAGE

◄

PROFILE

STANDARD

ITS

BACKLIGHT

DAY/NIGHT

GAMING

CUSTOM

►

CAMERA SETUP

CAMERA ID

BCD EFG HIJKLMNO PQR STU VWXYZO

123 456 789

: ?

*() /

SP►► ◄◄ SP LOCATION

- - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - -

ALC

LEVEL

[

]

----

BACKLIG HT OFF

You can configure the general settings of the camera module. Use the four direction (

CAMERA ID

Provide the ID and position for a camera that displays on the screen.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

Select <CAMERA SET> - <CAMERA ID>.

Use the four direction (

select a desired character. In the lower input box of the screen, the selected character will be entered.

You can enter up to 54 characters including alphabets,



numbers and special characters.

When done, continue to select <LOCATION>

to specify the display position of the camera ID.

IRIS

You can set the iris to control the intensity of radiation incoming to the camera.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

Select <CAMERA SET> - <IRIS>.

Use the left/right (

2. <ALC> or <ELC>.

ALC : Controls the luminance automatically.

ELC : Controls the level electronically.

▲▼◄ ►

) buttons to select a desired item.

▲▼◄ ►

) buttons to

◄ ►

) buttons to select either

CAMERA ID

BCDEFGHIJKLMNOPQRSTUVWXYZO

123456789

SP►► ◄◄ SP LOCATION

- - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - -

LENS DC

LEVEL BACKLIGHT OFF

: ?

ALC

LENS : Select a lens to use.

LEVEL : Select an overall brightness level. BACKLIGHT : Specify an area to

compensate for the backlight. With <AREA> set to <USER>, you can specify the position and size.

*()/

[

● CAMERA SETUP

]

----

If the iris is set to <ALC>, ﬁ xing the iris is your priority when you adjust AE and the shutter speed.



English _19

camera setup

CAMERA ID ON IRIS ALC MOTION (F.FAST)

--DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKER LESS OFF XDR MID DIS OFF

WHITE B AL DIGITAL ZOOM OFF DETAIL

[

] AGC COL OR SUP MID REVERSE OFF POSI/NE GA + PIP OFF

MOTION

You can specify a level of AGC for controlling the camera motion. Select F.FAST if you want to monitor a very fast moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same condition. As long as DAY/NIGHT is set to AUTO, the

◄

CAMERA SET

CAMERA ID ON IRIS ALC MOTION (F.FAST) DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS OFF XDR MID DIS OFF

►

---

<MOTION> menu is not available.

DNR

Reduces the noise on the screen. This is useful, especially for a noisy screen. Set it to <USER>, you can specify the level.

SHUTTER

The SHUTTER menu is used to set the fixed fast electronic shutter or auto fast electronic shutter.

DAY/NIGHT AUTO

WHITE BAL DIGITAL ZOOM OFF DETAIL AGC COLOR SUP MID REVERSE OFF POSI/NEGA + PIP OFF

[

]

SENS-UP

If the brightness of the video signal is too low, the Slow Shutter function will be activated. Slow Shutter can collect the individual max frame rate to adjust the setting.

FLICKERLESS

If set to <ON>, the shutter speed will be fixed to 1/100 second. This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.

If IRIS is set to ELC / SHUTTER to AUTO, FIX, EXT mode / SENSE UP to FIX / AGC to FIX, the <DIS> menu



will be disabled.

XDR

This will correct a brightness difference between different scenes for the optimal visibility. The higher the value is, the higher the correction level is.

DIS

Automatically compensates for the flicker on the screen. If set to <ON>, the image will be enlarged with digital zoom as much area as compensated.

20_ camera setup

DAY/NIGHT

AUTO

DAY

NIGHT BRIGHTN ESS MID DWELL TI ME 2S

NIGHT

DAY BRIGHTN ESS MID DWELL TI ME 5S

MASK AREA 1 2

WHITE BAL

MODE ATW2

RED

[

]

----

BLUE

[

]

----

MASK AREA

You can specify a recording mode according to the scene.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

Select <CAMERA SET> - <DAY/NIGHT>.

Select a screen transition mode according to the

illumination, and set options as appropriate.

DAY : Fixed to DAY mode, regardless of the scene.

NIGHT : Fixed to NIGHT mode, regardless of the scene. If BURST is set to <ON>, the burst signal will

BURST OFF

DAY

NIGHT

MASK AREA 1 2

AUTO

NIGHT BRIGHTNESS MID DWELL TIME 2S

DAY BRIGHTNESS MID DWELL TIME 5S

output.

AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice versa.

DAYNIGHT / NIGHTDAY : If set to <AUTO>, you can specify the brightness level triggering the mode switch between

MASK AREA

<SIZE>

DAY and NIGHT as well as the interval.

MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed. Any excessively bright area in a night scene will be masked.

WHITE BAL

If you need to adjust the screen brightness, use the WHITE BALANCE function.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

Select <CAMERA SET> - <WHITE BAL>.

Select a mode where you set the balance.

DAY : You can set the RED, and BLUE value in DAY mode.

NIGHT : You can adjust the <WHITE BAL> according to the ambient luminance.

WHITE BAL

DAY/NIGHT DAY

MODE ATW2

[

RED

[

BLUE

]

----

]

----

● CAMERA SETUP

English _21

camera setup

WHITE BAL

DAY/NIGHT NIGHT BRIGHTNE SS MID

RED

[

]

----

BLUE

[

]

----

R-GAIN

[

0040

]

B-GAIN

[

0133

]

According to the speciﬁ ed recording mode,

select a WHITE BAL mode with necessary options.

BRIGHTNESS : Specify a brightness level triggering the switch from DAY to NIGHT mode.

MODE : According to the selected mode, you can adjust the RED and BLUE color level.

RED : Adjust the strength of the red color.

BLUE : Adjust the strength of the blue

color.

R-GAIN/B-GAIN : Specify the current color temperature manually.



You can set the R-GAIN, and B-GAIN value only in AWC mode.

DIGITAL ZOOM

You can set the digital zoom factor and position. When the zoom factor and position are defined, the digital zoom function will operate.

If you set the digital zoom to a larger factor than the actual enlargement for compensation, the DIS



function will be disabled.

DETAIL

You can adjust the vertical and horizontal sharpness, respectively.

AGC COLOR SUP

This will adjust the color scheme according to the AGC value.

REVERSE

This will reverse the signal left to right, top to bottom, or a combination of the preceding.

POSI/NEGA

This will display the video brightness signal either normally or reversely.

PIP

You can view a main image with a sub image on the same screen.

WHITE BAL

DAY/NIGHT NIGHT BRIGHTNESS MID

MODE AW C

[

RED

[

BLUE R-GAIN B-GAIN

00 00

[

0040

[

0133

] ]

----

---] ]

----

22_ camera setup

PRIVACY ZONE

1 2 3 4 5 6

7 8 9 10 11 12

PRIVACY SET

STYLE

MOSAIC1

PRIVACY ZONE SET 1

You can set up to 12 privacy zones that will be hided for privacy of the subject when recording.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

ZONE SETUP

Select <MAIN MENU> - <PRIVACY ZONE>.

Use the four direction (

▲▼◄ ►

) buttons to select a desired number. The Zone setup screen appears.

Select the <PIXEL LEVEL>.

Specify the pixel unit level for the POSITION setting.

Select <POINT>.

You will see dots on the screen.

Use the four direction (

▲▼◄ ►

) buttons to specify

the position for each of the four dots.

Select <POSITION> and use the four direction

▲▼◄ ►

) buttons to specify the position for each

( of the four dots.

Save the changes and move to the previous screen and select the <STYLE>.

7. Select <COLOR> and pick a desired color.



Setting one or more privacy zone and enabling privacy function will disable the PIP function.

◄

PRIVACY ZONE

1 2 3 4 5 6

7 8 9 10 11 12

PRIVACY SET STYLE

PRIVACY ZONE SET 1

PIXEL LEVEL

[4]

►

MOSAIC1

● CAMERA SETUP

English _23

camera setup

FACTORY DEFAULTS OSD COL OR BW

FACTORY DEFAULTS

OTHERS

You can reset the camera, or select the OSD font color to your preference.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

FACTORY DEFAULT

Select <MAIN MENU> - <OTHER SET>

- <FACTORY DEFAULTS>.

The FACTORY DEFAULTS setup screen appears.

Select <OK>.

All the settings will be restored to the factory default. However, the language setting will not be restored.

◄

OTHER SET

FACTORY DEFAULTS OSD COLOR BW

FACTORY DEFAULTS

CANCEL

►

OSD COLOR

You can set the font color of the user interface.

24_ camera setup

SYSTEM INFO

TYPE 3

IPB

CAMERA VER. v1.00_090724

ENGLISH

FRANÇAI S

DEUTSCH ESPAÑOL ITALIANO

You can check the system information.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

Select <MAIN MENU> - <SYSTEM INFO>.

The current system information is displayed.



The camera type may different, depend on the video

signal.

◄

SYSTEM INFO

TYPE 3 CAMERA VER. v1.00_090724

LANGUAGE

You can select a language to your preference.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 17)

Select <MAIN MENU> - <LANGUAGE>.

Select your preferred language using the

up/down (▲▼) buttons.



Supported language may different.

◄

LANGUAGE

ENGLISH

FRANÇAIS

DEUTSCH ESPAÑOL ITALIANO

►

IPB

● CAMERA SETUP

►

English _25

network connection and setup

You can set up the network settings according to your network configurations.

CONNECTING THE CAMERA TO AN IP ROUTER WITH THE XDSL/CABLE MODEM

This is for a small network environment such as homes, SOHO and ordinary shops.

SNC-B2331

INTERNET

kzsG❄⏈G

xDSL or

SNC-B2331

Local PC

⦐䀠wj

pwḩ㡔ὤ

IP Router

jG⯜⒴

Cable Modem

kkuzG㉐ⶸ

DDNS Server

OkGjSGrvylhP

(Data Center, KOREA)

Configuring the network settings of the local PC connected to an IP router

Configuring the network settings of the local PC connected to an IP router, follow the instructions below.

Select : <Network Neighborhood>  <Properties>  <Local Area Connection>



<Obtain an IP address automatically> or <Use the following IP address>.



Follow the instructions below if you select <Use the following IP address>: ex1) If the address (LAN IP) of the IP router is 192.168.1.1

IP address: 192.168.1.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1

ex2) If the address (LAN IP) of the IP router is 192.168.0.1

IP address: 192.168.0.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.1

ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1

IP address: 192.168.xxx.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.xxx.1

For the address of the IP router, refer to the product’s documentation.



kzsG❄⏈G

xDSL or

jG⯜⒴

Cable Modem

㞬⺴G㠄󰵾Gwj

External Remote PC

26_ network connection and setup

Checking if the IP router is connected to the xDSL/Cable modem properly

Select <Status> from the Settings menu of the IP Router

If it is properly connected, <IP Address>, <Subnet Mask> and <Gateway> provided by your ISP are displayed. Please remember these values because they are required so that an external remote computer of the IP router connects to the camera. However, note that certain ISPs change the settings of <IP Address>, <Subnet Mask> and <Gateway> on a regular basis

If the IP router is not properly connected, press the [Connect] button to try to reconnect or check if the settings of the IP router are correct.

●

NETWORK CONNECTION AND SETUP

CONNECTING THE CAMERA TO AN IP ROUTER WITH LOCAL AREA NETWORKING

This is for a large network environment such as corporate office, building, public office and factory.

SNC-B2331

⦐䀠Gwj

Local PC

pwGḩ㡔ὤ

IP Router External Remote PC

ḩ㡔ὤG㞬⺴Gwj

Local PC

Switch

HUB

Firewall

ⵝ䞈ⷱ

(Data Center, KOREA)

INTERNET

kkuzG㉐ⶸ

DDNS Server

OkGjSGrvylhP

㞬⺴G㠄󰵾Gwj

Configuring the network settings of the local PC connected to an IP router

Configuring the network settings of the local PC connected to an IP router, follow the instructions below.

Select : <Network Neighborhood>  <Properties>  <Local Area Connection>



<Obtain an IP address automatically> or <Use the following IP address>.



Follow the instructions below if you select <Use the following IP address>: ex1) If the address (LAN IP) of the IP router is 192.168.1.1

IP address: 192.168.1.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1

ex2) If the address (LAN IP) of the IP router is 192.168.0.1

IP address: 192.168.0.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.1

English _27

network connection and setup

ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1

IP address: 192.168.xxx.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.xxx.1

For the address of the IP router, refer to the product’s documentation.



CONNECTING THE CAMERA DIRECTLY TO A DHCPBASED XDSL/CABLE MODEM

INTERNET

kkuzG㉐ⶸ

DDNS Server

OkGjSGrvylhP

(Data Center, KOREA)

SNC-B2331

kzsG❄⏈

xDSL or

jG⯜⒴

Cable Modem

Setting the IP Router

This is enabled for a modem using DHCP.

Set the Static or Dynamic IP address. (pages 31~36)

Launch an Internet browser on the local PC connected to the IP Router.

Enter the IP Router’s address in the address bar of the browser.

ex) http://192.168.1.1, http://192.168.0.1

or http://192.168.xxx.1

For the DDNS URL address, refer to "To check the DDNS address". (page 38)



When the IP Router is connected, the login window appears and prompts you to

enter the password.

For the login IP and the password, refer to the IP router’s documentation.



When done, you will see the setup window of the IP router. In the setup menu, select “Automatic Conﬁ guration-DHCP” for Internet Connection Type.

For the menu location of Internet Connection Type or DHCP selection, refer to the IP router’s



documentation.

When done, click the [Save] or [Apply] button to save the settings.

28_ network connection and setup

㞬⺴G㠄󰵾Gwj

External Remote PC

CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING

Connecting to the camera from a local PC in the LAN

Launch an Internet browser on the local PC.

Enter the IP address of the camera in the address bar of the browser.

SNC-B2331

Switch

HUB

ⵝ䞈ⷱ

Firewall

INTERNET

External Remote PC

㞬⺴G㠄󰵾Gwj

●

NETWORK CONNECTION AND SETUP

⦐䀠Gwj

Local PC

A remote PC in an external Internet out of the LAN network may not be able to connect to the



camera installed in the intranet if the port-forwarding is not properly set or a ﬁ rewall is set.

kkuzG㉐ⶸ

DDNS Server

OkGjSGrvylhP

(Data Center, KOREA)

In this case, to resolve the problem, contact your network administrator.

English _29

network connection and setup

IP ADDRESS SETUP

Buttons used in IP Installer

Item Description

Device Name

Mode

MAC(Ethernet) Address

IP Address

Protocol

UPnP Status This function is not currently implemented.

Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search.

Displays either <Static> or <Dynamic> for the current network connection status.

Ethernet address for the connected camera. Click the column to sort the list by Ethernet address. However, search will be stopped if clicked during the search.

IP address. Click the column to sort the list by IP address. However, search will be stopped if clicked during the search. The factory default is "192.168.1.200".

Network setting for the camera. The factory default is "IPv4". Cameras with the IPv6 setting will be displayed "IPv6".

30_ network connection and setup

+ 72 hidden pages