Samsung SND-7082F, SND-7082, SNV-7082, SNB-7002 User Manual

NETWORK CAMERA

User Manual

SNB-7002/SND-7082/

SND-7082F/SNV-7082

Network Camera

User Manual

ade ma rk

The name of thi s product is the reg istered tradema rk of Samsung Techwin C o., Ltd. Other trad emarks mention ed in this manual are th e registered trad emark of their resp ective company.

Restriction

Samsung Techwi n Co., Ltd shall reser ve the copyrigh t of this document. U nder no circumst ances, this docu ment shall be reproduc ed, distribute d or changed, par tially or wholly, wit hout formal auth orization of Sa msung Techwin.

Disclaimer

Samsung Techwi n makes the best to ver ify the integri ty and correct ness of the conten ts in this document , but no formal guar antee shall be provi ded. Use of this do cument and the subse quent results sha ll be entirely on the u ser’s own responsib ility. Samsung Techwi n reserves the ri ght to change the con tents of this docum ent without pri or notice.

Design an d specificat ions are subjec t to change wit hout prior not ice.

The defau lt password c an be exposed to a h acking thread s o it is recommen ded to change th e password

after in stalling the pr oduct. Note that t he security a nd other relat ed issues caus ed by the unchan ged password s hall be respon sible for the user.

is the regist ered logo of Samsun g Techwin Co., Ltd.

overview

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings, Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

● OVERVIEW

English _3

overview

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance with the installation instructions.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

4_ overview

Class construction

An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location.

When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed.

CAUTION

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

The BNC Out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product.

Please use the input power with just one camera and other devices must not be connected.

● OVERVIEW

English _5

overview

Please read the following recommend safety precautions carefully.

Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near

heating equipment or heavy cold area. Do not place this apparatus near conductive material. Do not attempt to service this apparatus yourself. Do not place a glass of water on the product. Do not install near any magnetic sources. Do not block any ventilation openings. Do not place heavy items on the product.

User’s Manual is a guidance book for how to use the products.

The meaning of the symbols are shown below.

Reference : In case of providing information for helping of product’s usages Notice : If there’s any possibility to occur any damages for the goods and

human caused by not following the instruction

 Please read this manual for the safety before using of goods and keep it in

the safe place.

6_ overview

CONTENTS

OVERVIEW

INSTALLATION &

CONNECTION

NETWORK CONNECTION

AND SETUP

3 Important Safety Instructions 9 Product Features 10 Recomended PC Specifications 10 Recomended SD/SDHC Memory

Card Specifications

11 What’s Included 14 At a Glance (SNB-7002)

At a Glance (SND-7082)

18 22 At a Glance (SND-7082F) 25 At a Glance (SNV-7082)

28 Mounting the Lens (SNB-7002) 30 Installation (SND-7082) 32 Installation (SND-7082F) 34 Installation (SNV-7082) 39

Inserting/Removing a SD Memory Card

43 Memory Card Information

(Not Included)

44 Connecting with other Device

50 Connecting the Camera Directly

to Local Area Networking

51 Connecting the Camera Directly

to a DHCP Based DSL/Cable Modem

52 Connecting the Camera Directly

to a PPPoE Modem

53 Connecting the Camera to a

Broadband Router with the PPPoE/Cable Modem

54 Buttons used in IP Installer 55 Static IP Setup 59 Dynamic IP Setup 60 Port Range Forward (Port

Mapping) Setup

62 Connecting to the Camera from

a Shared Local PC

62 Connecting to the Camera from

a Remote PC via the Internet

● OVERVIEW

English _7

overview

WEB VIEWER

SETUP SCREEN

APPENDIX

123

63 Connecting to the Camera 64 Login 65 Installing Silverlight Runtime 69 Installing STW WebViewer Plugin 70 Using the Live Screen 72 Search and play by event 73 Search and play by time

75 Setup

75 Video & Audio Setup

91 Network Setup 100 Event Setup 116 System Setup

123 Specification 129 Product Overview 133 Troubleshooting 135 Open Source Announcement

8_ overview

PRODUCT FEATURES

• Full HD Video Quality

Multi-Streaming

•

This network camera can display videos in different resolutions and qualities simultaneously using different CODECs.

• Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

• Alarm

If an event occurs, the event-related video will be transferred to the FTP/email specified by the user or saved to the SD memory port.

• Tampering Detection

Detects tempering attempts on video monitoring.

• Motion Detection

Detects motion from the camera’s video input.

• Intelligent Video Analysis

Analyzes video to detect logical events of specified conditions from the camera’s video input.

• Face Detection

Detects faces from the camera’s video input.

• Smart Codec

Adaptively applies codecs for a portion of the camera’s field of view to improve the quality of such area specified by user.

• Audio Detection

Detects sound louder than a certain level specified by user.

Auto Detection of Disconnected Network

•

Detects network disconnection before triggering an event.

• ONVIF Compliance

This product supports ONVIF. For more information, refer to www.onvif.org.

, or the event signal will be sent to the Alarm Out

● OVERVIEW

English _9

overview

RECOMENDED PC SPECIFICATIONS

• CPU : Intel Core 2 Duo 2.4GHz or higher

• Operating System : Windows XP

• Resolution : 1280X1024 pixels or higher (32 bit color)

• RAM : 2GB or higher

eb Browser : Internet Explorer 7 or Higher, Firefox 9 or Higher, Chrome 15 or Higher,

• W

Neither a beta test version unlike the version released in the company website nor the developer version will



be supported.

It is recommended to connect to IPv6 in Windows 7.



• Video Memory : 256MB or higher

Safari 5.1 or Higher

If the driver of the video graphic adapter is not installed properly or is not the latest version, the



video may not be played properly.

For a multi-monitoring system involving at least 2 monitors, the playback performance can be



deteriorated depending on the system.

RECOMENDED SD/SDHC MEMORY CARD SPECIFICATIONS

• 4GB ~ 32GB

ecommended to use memory cards of at least class 6 speed.

• It is r

, VISTA, 7, Mac OS

10_ overview

WHAT’S INCLUDED

UNLOCK

Please check if your camera and accessories are all included in the product package.

Appearance Item Name

Quantity

Description Model Name

● OVERVIEW

Camera

SNB-7002 or SND-7082 or

SND-7082F or

SNV-7082

Instruction book,

Installer S/W CD,

CMS S/W DVD

SNB-7002/

Quick Guide

(Optional)

SND-7082/

SND-7082F/

SNV-7082

Cable for the testing

monitor

Used to test the camera

connection to a portable display

device

English _11

overview

Appearance Item Name

C Mount Adapter,

Auto Iris Lens Connector

Camera Holder (Mount) 1

Camera Holder (Mount)

Screws

6-position Terminal Block

5-position Terminal Block

Iron Screw 3 Used for fixing to an iron plate

Template

Jack Modular 1 LAN cable gender

Quantity

2 Used to install the mount

Description Model Name

Used to install the C Mount

camera lens

Used to install the camera

holder

Used for alarm in/out terminals

Product installation guide

SNB-7002

SND-7082/

SND-7082F/

SNV-7082

SND-7082/ SND-7082F

SND-7082F/

SNV-7082

12_ overview

Dustproof Plate 1

Prevents dust ingress into the

wiring connection part.

SND-7082

Appearance Item Name

Tapping Screw 1 Used to fix the safety bracket

Bracket Safety 1 Safety Bracket

Quantity

Description Model Name

SND-7082F

● OVERVIEW

ASSY-Tapping Screw

L Wrench

Plastic Anchor

Machine Screws 4

Lens Options (not included)

CS/C Lens

Used for installation on the wall

or ceiling

Used to remove/

fix the dome cover

For fixing a screw,

Inserted in a hole

(reinforced anchoring force)

Used for assembling the dome

case when installing the product

on the pipe, wall mount, etc. or

blocking a hole.

Optional lens to be inserted in

a camera

SNV-7082

SNB-7002

English _13

overview

AT A GLANCE (SNB-7002)

Front Side





Item Description

Camera Holder



(Mount) Holes

Mounting Bracket

Screw Hole

Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket.

Used to fix the camera on a bracket or mounting bracket.

The screw size : use this screw to fix the mounting bracket.



1/4" - 20UNC (20THREAD) L : 4.5mm±0.2mm (ISO Standard) or 0.197" (ASA Standard)

14_ overview

Item Description

Auto Iris Lens

(Optional)

Auto Iris Lens



Connector

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied



ethanol.

Mounting Bracket is not included.



For more information to use mounting bracket, refer to the product’s documentation.

Installed on the lens adaptor.

Used to supply power and output signal to control the iris of the lens.

● OVERVIEW

English _15

overview

Rear Side





Item Description

SD Memory Card



Compartment

Audio terminal

SD, Power Indicators

 b

c 

 



Compartment for the SD memory card.

AUDIO OUT Used to connect to speakers.

AUDIO IN Used to connect to a microphone.

ON : A memory card is inserted and operates normally.

Flashing :

POWER

Failed to record, insufficient space, or inserted

abnormally.

OFF : Camera is off, camera is restarting, memory card is

not in place, or when record is off.

ON : While the power is on

OFF : If the power is off

16_ overview

Item Description

The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system.

If you reset the camera, the network settings will be adjusted so that

Reset Button



Focus Adjustment



Button

Power Port Used to plug the power cable.



Lightning protective



grounding port

Network Port Used to connect the PoE or Ethernet cable for network connection.



Alarm I/O Port



Test Monitor Out



DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to change the basic network settings such as IP address, Subnet mask, Gateway, etc., before you can connect to the network.

The button adjusts the focus of image automatically.

Used to discharge the lightning current safely outside in order to protect the camera.

ALARM IN Used to connect the alarm input signal.

ALARM OUT

GND Used for earth-grounding.

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

Used to connect the alarm output signal.

● OVERVIEW

English _17

overview

UNLOCK

AT A GLANCE (SND-7082)

Appearance



Item Description



Top cover

Case cover used to protect the lens and the main unit.

c  

 

Camera Case

18_ overview

Housing part that covers the camera body.

Item Description



Power Port

Test Monitor Out

Used to plug the power cable.

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

● OVERVIEW

  

Network Port

Audio In Jack

Audio Out Jack

Used to connect the PoE or Ethernet cable for network connection.

Used to connect to a microphone.

Used to connect to speakers.

English _19

overview

UNLOCK

Components



20_ overview

UNLOCK

 







Item Description

Lens Lens for the camera.



ALARM IN Used to connect the alarm input signal.

Alarm I/O Port

Reset Button

Test Monitor Out



Focus Adjustment



Button

SD Memory Card



Compartment

Lock Release Lever



Bracket Used to install the camera on the wall or ceiling with the screws.



Wiring Cover



Release Lock



ALARM OUT Used to connect the alarm output signal.

GND Used for earth-grounding.

The button restores all camera settings to the factory default.

Press and hold for about 5 seconds to reboot the system.

If you reset the camera, the network settings will be adjusted so that

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

The button adjusts the focus of image automatically.

Compartment for the SD memory card.

Press the <UNLOCK> levers on both ends to separate camera module from the body.

If you drill a hole in the wiring cover for wiring, remove the cover and attach the provided dustproof plate to it, and arrange the cables through the plate.

If you want to remove the bracket from the main unit or remove the camera from the bracket, push this out and turn the main unit in the <UNLOCK> direction.

● OVERVIEW

English _21

overview

AT A GLANCE (SND-7082F)

Appearance



Item Description



Top cover

Case cover used to protect the lens and the main unit.

c    

Camera Case

Power Port

Test Monitor Out



Network Port



Audio In Jack



Audio Out Jack



22_ overview

Housing part that covers the camera body.

Used to plug the power cable.

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

Used to connect the PoE or Ethernet cable for network connection.

Used to connect to a microphone.

Used to connect to speakers.

Components

 b

c 

Item Description

Network Port Used to connect the PoE or Ethernet cable for network connection.



ALARM IN Used to connect the alarm input signal.



Alarm I/O Port

Test Monitor Out

Reset Button

ALARM OUT

GND Used for earth-grounding.

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

The button restores all camera settings to the factory default.

Press and hold for about 5 seconds to reboot the system.

If you reset the camera, the network settings will be adjusted so that

Used to connect the alarm output signal.

● OVERVIEW

English _23

overview

Item Description

Lock Release Lever



Lens Lens for the camera.



Focus Adjustment



Button

SD Memory Card



Compartment

 

 

Press the <UNLOCK> levers on both ends to separate camera module from the body.

The button adjusts the focus of image automatically.

Compartment for the SD memory card.

24_ overview

AT A GLANCE (SNV-7082)

Appearance



Item Description



Top cover

Case cover used to protect the lens and the main unit.

● OVERVIEW

c   



b c



  

Camera Case

Power Port

Test Monitor Out

Network Port

Audio In Jack

Audio Out Jack

Housing part that covers the camera body.

Used to plug the power cable.

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

Used to connect the PoE or Ethernet cable for network connection.

Used to connect to a microphone.

Used to connect to speakers.

English _25

overview

Components

Item Description

Network Port Used to connect the PoE or Ethernet cable for network connection.



Alarm I/O Port

Test Monitor Out

Reset Button



 b

c 

ALARM IN Used to connect the alarm input signal.

ALARM OUT

GND Used for earth-grounding.

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

The button restores all camera settings to the factory default.

Press and hold for about 5 seconds to reboot the system.

If you reset the camera, the network settings will be adjusted so that

DHCP can be enabled. If there is no DHCP server in the network, you

must run the IP Installer program to change the basic network settings such as IP address, Subnet mask, Gateway, etc., before you can connect to the network.

Used to connect the alarm output signal.

26_ overview

 



Item Description

Lock Release Lever



Lens Lens for the camera.



Focus Adjustment



Button

SD Memory Card



Compartment

Release Lock



Press the <UNLOCK> levers on both ends to separate camera module from the body.

The button adjusts the focus of image automatically.

Compartment for the SD memory card.

If you want to remove the bracket from the main unit or remove the camera from the bracket, push this out and turn the main unit in the <UNLOCK> direction.

● OVERVIEW

 

English _27

installation & connection

MOUNTING THE LENS (SNB-7002)

Disconnect the power before proceeding.

The C lens and CS lens are not included in the product package.



It is recommended that megapixel lens are use on this camera to optimise performance.

Mounting the CS lens on a camera

Turn the optional CS lens clockwise to insert it.

Mounting the C lens on a camera

Turn the C mount adaptor clockwise to insert it and do the same with the C lens.

CS Lens

28_ installation & connection

C Lens

Connecting the Auto Iris Lens connector

Insert the lens connector into the corresponding hole of the camera.

● INSTALLATION & CONNECTION

Focusing

Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.

English _29

installation & connection

Precautions before installation

Ensure you read out the following instructions before installing the camera:

• When installing on a ceiling or wall, desir

times of the camera’s weight.

• Stuck-in or peeled-off cables can cause damage to the product or a fire.

• For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

INSTALLATION (SND-7082)

Disassembling

1. Take the camera body with one hand

and take the top cover with the other hand. Then, turn the cover counter clockwise to remove it.

ess the <UNLOCK> levers on both ends

2. Pr

to separate camera module from the body.

ed spot must be capable of supporting at least 5

Top cover

Camera Body

UNLOCK

30_ installation & connection

+ 128 hidden pages