Samsung SMX-C10, SMX-C10GN, SMX-C14, SMX-C14RN, SMX-C13 User Manual

...

Memory Camcorder

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

SMX- C10RN/SMX- C10LN/ SMX- C10GN/SMX- C13RN/ SMX- C13LN/SMX-C13GN/ SMX-C14RN/SMX-C14LN/

SMX-C14GN

key features of your memory camcorder

High-resolution Color Widescreen LCD (2.7” WIDE TFT LCD)

Samsung memory camcorder utilizes a 2.7-inch 230k pixel Widescreen LCD which allows bright and clear monitoring. In addition, the LCD Enhancer adjusts color and brightness to the screen lighting conditions for better monitoring under strong sunlight.

H.264/AVC (MPEG4 part 10/Advanced Video Coding) Encoding

latest video compression technology, H.264, uses a high compression rate to sharply increase the recordable time with the same size storage.

Simple & Easy User Interface

Designed to provide optimized and easy use with an ergonomic design. An improved Graphics User Interface offers a new and fresh look as well as an easy operation.

High-capacity embedded Flash Memory (8GB (SMX-C13 only), 16GB (SMX-C14 only))

The camcorder has a built-in high capacity ﬂash memory that allows you to record movie (or photo) images.

User-friendly Functions

User-friendly EASY Q optimises your memory camcorder to the recording conditions automatically, providing beginners with the best performance.

Twice the memory options (8GB (SMX-C13 only), 16GB (SMX-C14 only))

The memory camcorder’s external memory slot accepts both high capacity SDHC and MMCplus cards. Play and transfer videos quickly and easily using the memory type of your choice. In addition to

{

this slot, the memory camcorder has built-in ﬂash memory.

High-resolution image through Mobile DNIe

The Samsung memory camcorder has 3DNR (3-dimensional noise reduction), high-sensitivity color expression (intelligent color expression), High performance Anti-Shake (Hyper DIS), and automatic face detection (Face Detection) features.

Capture Visions farther than the eye can see (10x Optical/1200x Digital Zoom)

Samsung's powerful optical zoom lenses bring the world closer without losing image quality. In addition, Digital Zoom Interpolation enables clearer digital zooming, with less distortion than previous types of digital zooms.

ii_English

~GGGG{

Various Recording Features

English_iii

The memory camcorder supports Anti-Shake (HDIS), Digital Effect and a wide range of other functions that you can select according to the scene you are recording. ²pages 56~70

Capturing Photo Image (8GB (SMX-C13 only), 16GB (SMX-C14 only))

Captures a moving subject instantly and saves the scene as a photo image.

Comfortable, Ergonomic Design

This camcorder is designed for comfort when making long recordings. With this ergonomic design, you can shoot subjects comfortably from any position.

Time Lapse Recording Catches the Moment

You can record a long scene in short intervals. Record artistic, documentary videos including the passage of clouds, blooming ﬂ owers etc. Use this function to make UCC (user created contents) videos, educational programs or for other purposes.

Direct upload of your videos to the Web!

The built-in editing software Intelli-studio installs directly from this camcorder to your PC, when you simply connect your camcorder to a PC via USB cable. Intelli-studio also allows direct uploading of your contents to YouTube or Flickr with the press of a button. Sharing the contents with your friends is simpler

{

~GGG

than ever before.

Make a digest of your movie! Storyboard printing!

This function captures 16 still images arbitrarily from the selected movie and saves them into the storage media. It presents a quick overview of your movie, helping you to understand the overall topic.

safety warnings

What the icons and signs in this user manual mean :

WARNING

CAUTION

These warning signs are here to prevent injury to you and others. Please follow them explicitly. After reading this section, keep it in a safe place for future reference.

Death or risk of serious personal injury.

Potential risk of personal injury or material damage.

To reduce the risk of ﬁre, explosion, electric shock, or personal injury when using your camcorder, follow these basic safety precautions:

Hints or referential pages that may be helpful when operating the camcorder.

precautions

Warning!

•

This camcorder should always be connected to an AC outlet with a protective grounding connection.

•

Batteries should not be exposed to excessive heat such as sunshine, ﬁre or similar.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

If this power supply is used at 240V ac, a suitable plug adaptor should be used.

iv_English

Caution

BEFORE USING THIS CAMCORDER

English_v

•

This camcorder is designed exclusively for use wth the high-capacity built-in ﬂash memory (8GB (SMX-C13 only), (16GB (SMX-C14 only)) and an external memory card.

•

This camcorder records video in H.264/AVC (MPEG4 part 10/Advanced Video Coding) format compliant with the Standard resolution (SD-VIDEO) format.

•

Please note that this camcorder is not compatible with other digital video formats.

•

Before recording important video, make a trial recording.

- Play back your trial recording to make sure the video and audio have been recorded properly.

•

The recorded contents cannot be compensated for:

- Samsung cannot compensate for any damages caused when recording is not made normally or recorded contents cannot be played back because of a defect in the camcorder or memory card. Also, Samsung cannot be held responsible for your recorded video and audio. Recorded contents may be lost due to an error when handling this camcorder or memory card, etc.Samsung

- shall not be held responsible for the loss of recorded contents, and cannot compensate for any damages.

•

Make a backup of important recorded data.

- Protect your important recorded data by copying the ﬁles to a PC. We recommend copying the data to your PC or other recording media for storage. Refer to the software installation and USB connection guide.

•

- Data recorded on a card in this camcorder from other digital/analog media or devices is protected by the copyright act and cannot be used without permission of the copyright owner except for personal enjoyment. Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.

important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSID

EREFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

Warning

To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.

Caution

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachment/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipping over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

vi_English

15. Apparatus shall not be exposed to dripping or

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

English_vii

splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

16. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered.Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register. This CAMCORDER should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

17. POWER SOURCES: The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions.

18. GROUNDING OR POLARIZATION: This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to ﬁt, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug.

19. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.

20. OUTDOOR ANTENNA GROUNDING:CAMCORDER, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA No.

70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See ﬁgure below.

21.

LIGHTNING: For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and powerline surges.

important safety instructions

22. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

23.

OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of ﬁre or electric shock.

24. OBJECTS AND LIQUIDS: Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a ﬁre or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use.

25. SERVICING: Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁed service personnel.

26. DAMAGE REQUIRING SERVICE: Unplug this CAMCORDER from the wall outlet and refer servicing to qualiﬁed service personnel under the following conditions:

viii_English

a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have

fallen into the CAMCORDER.

c. If the CAMCORDER has been exposed to rain or

water.

d. If the CAMCORDER does not operate normally

by following the operating instructions, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualiﬁed technician to restore the CAMCORDER to its normal operation.

e. If the CAMCORDER has been dropped or the

cabinet has been damaged.

f. When the CAMCORDER exhibits a distinct

change in performance, this indicates a need for service.

27.

REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts speciﬁed by the manufacturer and has the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock or other hazards.

28. SAFETY CHECK: Upon completion of any service or repairs to this CAMCORDER, ask the service technician to perform safety checks to determine that the CAMCORDER is in safe operating order.

English_ix

29. To prevent damage which may result in ﬁre or shock

hazard, do not expose this appliance to rain or moisture.

30. If this power supply is used at 240V ac, a suitable plug adaptor should be used.

31. This product is covered by one or more of the following U.S. patents: 5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455 6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853 6,765,853 6,771,890 6,771,891 6,775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201 6,862,256 6,868,054 6,894,963 6,937,552

USER INSTALLER CAUTION: Your authority to operate this FCC certiﬁed equipment could be voided if you make changes or modiﬁcations not expressly approved by this party responsible for compliance to part 15 FCC rules.

NOTE: Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY

AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung (7267864)

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA “ Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help and for additional suggestions. The user may ﬁnd the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This Booklet is available from the U.S. Government Printing Ofﬁce, Washington, D.C. 20402, Stock No. 004-000-00345-4.

FCC Warning

The user is cautioned that changes or modiﬁcations not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

important information on use

IMPORTANT NOTE

•

Handle the liquid crystal display (LCD) with care:

- The LCD is a very delicate display device: Do not press its surface with excessive force, hit it or prick it with a sharp object.

- If you push the LCD surface, display uneveness may occur. If unevenness does not disappear, turn the camcorder off, wait for a few moments, and then turn it on again.

- Do not place the camcorder with the open LCD screen down.

- Close the LCD monitor when not using the camcorder.

•

Liquid crystal display:

- The LCD screen is a product of high precision technology. Out of the total pixels (approx. 230,000 pixels of an LCD monitor ), 0.01% or less pixels may be out (black dots) or may remain lit as colored dots (red, blue, and green). This shows the limitations of the current technology, and does not indicate a fault that will interfere with recording.

- The LCD screen will be slightly dimmer than usual when the camcorder is at low temperature, as in cold areas, or right after the power is turned on. Normal brightness will be restored when the temperature inside the camcorder rises. Note that this will have no effect on the image in a storage media, so there is no cause for concern.

•

Hold the camcorder correctly:

- Do not hold the camcorder by the LCD monitor when lifting it: the LCD monitor could detach and the camcorder may fall.

•

Do not subject the camcorder to impact:

- This camcorder is a precision machine. Take great care that you do not strike it against a hard object or let it fall.

- Do not use the camcorder on a tripod in a place where it is subject to severe vibrations or impact.

•

No sand or dust!

- Fine sand or dust entering the camcorder or AC power adaptor could cause malfunctions or defects.

•

No water or oil!

- Water or oil entering the camcorder or AC power adaptor could cause electric shock, malfunctions or defects.

•

Heat on surface of product:

- The surface of the camcorder will be slightly warm when used, but this does not indicate a fault.

x_English

English_xi

•

Be careful of unusual ambient temperature:

- Using the camcorder in a place where the temperature is over 104°F (40°C) or lower than 32°F (0°C) may result

in abnormal recording/playback.

- Do not leave the camcorder on a beach or in a closed vehicle where the temperature is very high for a long

time: This could cause a malfunction.

•

Do not point directly at the sun:

- If direct sunlight strikes the lens, the camcorder could malfunction or a ﬁre could occur.

- Do not leave the camcorder with the LCD screen exposed to direct sunlight: This could cause a malfunction.

•

Do not use the camcorder near TV or radio:

- This could cause noise to appear on the TV screen or in radio broadcasts.

•

Do not use the camcorder near strong radio waves or magnetism:

- If the camcorder is used near strong radio waves or magnetism, such as near a radio transmitter tower or

electric appliances, noise could enter video and audio that are being recorded. During playback of normally recorded video and audio, noise may also be present in picture and sound.

•

Do not expose the camcorder to soot or steam:

- Thick soot or steam could damage the camcorder case or cause a malfunction.

•

Do not use the camcorder near corrosive gas:

- If the camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel engines,

or corrosive gas such as hydrogen sulphide, the external or internal terminals could corrode, disabling normal operation, or the battery connection terminals could corrode, so that power will not turn on.

•

Do not use the camcorder near an ultrasonic humidiﬁer:

- Calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere to the

optical head of the camcorder, which could cause it to operate abnormally.

•

Do not clean the camcorder body with benzene or thinner:

- The coating of exterior could peel off or the case surface could deteriorate.

- When using a chemical cleaning cloth, follow the instructions.

•

Keep the memory card out of reach of children to prevent swallowing.

•

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

important information on use

ABOUT THIS USER MANUAL

•

This User Manual covers models SMX-C10RN, SMX-C10LN, SMX-C10GN, SMX-C13RN, SMX-C13LN, SMXC13GN, SMX-C14RN, SMX-C14LN, and SMX-C14GN. The SMX-C13RN, SMX-C13LN and SMX-C13GN have a 8GB built in ﬂash memory respectively, but also use memory cards. The SMX-C14RN, SMX-C14LN and SMXC14GN have a 16GB built in ﬂash memory respectively, but also use memory cards. The SMX-C10RN, SMXC10LN, SMX-C10GN does not have built-in ﬂash memory and uses memory cards exclusively. Although some features of SMX-C10RN, SMX-C10LN, SMX-C10GN, SMX-C13RN, SMX-C13LN, SMX-C13GN, SMX-C14RN, SMX-C14LN, and SMX-C14GN are different, they operate in the same way.

•

Illustrations of model SMX-C10N are used in this user manual.

•

The displays in this user manual may not be exactly the same as those you see on the LCD screen.

•

Designs and speciﬁcations of storage media and other accessories are subject to change without any notice.

•

In this user manual’s function descriptions, the icon on the on-screen display section means that it will appear on the screen when you set the corresponding function. Ex) Submenu item of “Video Resolution”¬ page 58

item contents on-screen display

"TV Super Fine" Videos recorded in 720x480(60i) resolution at super-ﬁne image quality.

(If set, corresponding icon ( ) will appear on the screen.)

•

Descriptions of the “Photo” and “built-in memory” in this user manual apply only to the following models: SMX-C13, SMX-C14

NOTES REGARDING TRADEMARK

•

All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders.

•

Windows countries.

•

Macintosh is trademark of Apple Inc.

•

YouTube® is a trademark of Google Inc.

•

Flickr® is a trademark of Yahoo.

•

All the other product names mentioned herein may be the trademark or registered trademarks of their respective companies.

•

Furthermore, “TM” and “®” are not mentioned in each case in this manual.

xii_English

is registered trademark or trademark of Microsoft Corporation, registered in the United States and other

English_xiii

precautions during use

The safety precautions illustrated below are to prevent personal injury or material damage. Heed all instructions carefully.

Death or risk of serious personal injury.

Unplug from power supply.Do not touch product.Prohibited action.WARNING

Means that there is a potential risk of personal injury or material damage.

WARNING

Do not overload outlets or extension cords as this may result in abnormal heat or ﬁre.

LIO

~GGGG{

{

No oil! Oil entering the camcorder or AC power adaptor could cause electric shock, malfunctions or defects.

{

Using the camcorder at temperatures over 140°F (60° C) may result in ﬁre. Keeping the battery at a high temperature may cause an explosion.

Do not aim the LCD screen directly into the sun. Doing so could cause eye injuries, as well as lead to malfunctioning of internal parts of the

~GGGG{

{

~GGGG{

product.

This precaution must be kept.Do not disassemble product.CAUTION

{

Do not allow water or metal and inﬂammable matter to enter the camcorder or AC power adaptor. Doing so may pose a ﬁre hazard.

Do not bend the power-cord or damage the AC power adaptor by pressing on it with a heavy object. There may be a risk of ﬁre or electric shock.

~GGGG{

{

No sand or dust! Fine sand or dust entering the camcorder or AC power adaptor could cause malfunctions or defects.

Do not disconnect the AC adaptor by pulling on its power-cord, as this could damage the power-cord.

SAND

precautions during use

Do not use the AC adaptor if it has damaged, split or broken cords or wires. Doing so may cause ﬁre or electric shock.

i u lf

n i n

e l c

~GGGG{

{

Never use cleaning ﬂuid or similar chemicals. Do not spray cleaners directly on the camcorder.

Do not attempt to disassemble, repair, or reform the camcorder or the AC adaptor to avoid a risk of ﬁre or electric shock.

When cleaning the AC adaptor, unplug the power-cord to avoid a risk of a malfunction or electric shock.

xiv_English

Do not connect the AC adaptor unless the plug can be fully inserted with no part of the blades exposed.

Keep the camcorder away from water when used near the beach or pool or when it rains. There is a risk of malfunction or electric shock.

Do not plug or unplug the power cord with wet hands. There is a risk of electric shock.

If the camcorder makes an abnormal sound, or smells or smokes, unplug the power-cord immediately and request service from a Samsung service center. There is a risk of ﬁre or personal injury.

Do not dispose of battery pack in a ﬁre as it may explode.

Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by children, consult a physician immediately.

Keep the power-cord unplugged when not in use or during lightning storms to prevent ﬁre hazard.

If the camcorder malfunctions, immediately detach the AC adaptor or battery from the camcorder immediately to avoid ﬁre or injury.

English_xv

CAUTION

{

~GGGG{

{

~GGGG

Do not press the surface of the LCD with force, or hit it with a sharp object. If you push the LCD surface, display unevenness may occur.

Do not use the camcorder in direct sunlight or near heating equipment. This will especially shorten the operation range of the remote control which uses infrared rays.

Do not expose the camcorder to soot or steam. Thick soot or steam could damage the camcorder case or cause a malfunction.

Do not drop or expose the camcorder, battery pack, AC adaptor or other accessories to severe vibrations or impact. This may cause a malfunction or injury.

Do not expose the camcorder to sand or water when recording at the beach or pool, or recording on a rainy day. Doing so may cause a malfunction or electric shock.

Do not use the camcorder near dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulphide. Doing so may corrode the external or internal terminals, disabling normal operation.

Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact.

Do not leave the camcorder in a closed vehicle where the temperature is very high for a long time.

E D I C I T C E

SN I

Do not expose the camcorder to insecticide. Insecticide entering the camcorder could cause the product to operate abnor mally. Turn the camcorder off and cover it with vinyl sheet, etc. before using insecticide.

precautions during use

Do not expose the camcorder to sudden changes in temperature or a humid places. There is also a risk of defect or electric shock when using outdoors during lightning storms.

Do not place the camcorder with the open LCD screen down.

Do not wipe the camcorder body with benzene or thinner. The exterior coating could peel off or the case surface could

deteriorate.

Do not leave the LCD monitor open when not using the camcorder.

Do not use the camcorder near strong radio waves or magnetism such as speakers or large motors. Noise could enter video or audio that are being recorded.

Keep important data separately. Samsung is not responsible for data loss.

xvi_English

Do not hold the camcorder by the LCD monitor when lifting it. The LCD monitor could detach and the camcorder may fall.

Use Samsung-approved accessories only. Using products from other manufacturers may cause overheating, ﬁre, explosion, electric shock or personal injuries due to abnormal operation.

Do not use the camcorder near TV or radio. This could cause noise on the TV screen or to radio broadcasts.

Place the camcorder on a stable surface and a place with ventilation openings.

QUICK START GUIDE

GETTING TO KNOW YOUR

CAMCORDER

PREPARATION

ABOUT THE STORAGE MEDIA

RECORDING

07 You can record videos in H.264 format!

11 What's included with your camcorder

12 Front & left view 13 Rear & bottom view

14 Using the hand strap 14

Adjusting the LCD screen

Basic camcorder positioning

Connecting a power source

Basic operation of your camcorder 25 LCD screen indicators 31

Turning the screen indicators on/off ( 33

Shortcut menu (OK GUIDE) 35

Initial setting : Time Zone, Date And Time & OSD Language

38 Selecting the storage media (SMX-C13/C14 only) 39

Inserting / ejecting the memory card 40

Selecting a suitable memory card 43

Recordable time and capacity

45 Recording movie images 46 Recording with ease for beginners (EASY Q Mode) 47 Taking photo images (SMX-C13/C14 only) 48 Zooming in and out

)

English_03

contents

RECORDING OPTIONS

PLAYBACK OPTIONS

04_English

PLAYBACK

49 54

49 Changing the playback mode (SMX-C13/C14 only) 50 Playing movie images 53 Viewing photo images (SMX-C13/C14 only)

54 Changing the menu settings 56 Menu items 57 Using the recording menu items 57 iSCENE 58 Video resolution 59 Photo resolution 59 16:9 Wide 60 EV (Exposure Value) 61 Back light 62 Focus 62 Face detection 64 Anti-Shake (HDIS) 65 Digital effect 66 Fader 66 Wind cut 67 Digital zoom 68 Time lapse REC 70 Guideline

71 Menu items 72 Play option 73 Delete 74 Protect 75 Story-board print 76 Copy 78 Divide 80 Combine 81 82 Slide show 83 File info

(SMX-C13/C14 only)

mark

(SMX-C13/C14 only)

SETTINGS OPTIONS

English_05

84 Changing the menu settings in "Settings" 85 Menu items 86 Using the settings menu items 86 Storage (SMX-C13/C14 only) 86 Storage Info 87 Format 87 File No. 88 Time Zone 90 Date/Time Set 90 Date Type 90 Time Type 91 Date/Time Display 91 LCD Brightness 91 LCD Color 92 LCD Enhancer 92 Auto LCD Off 92 Menu Design 92 Transparency 93 Beep Sound 93 Shutter Sound (SMX-C13/C14 only) 93 Auto Power Off 94 PC Software 94 TV Display 94 Default Set 95 Version 95 Language 95 Demo

USING WITH A WINDOWS

COMPUTER

96 Checking your computer type 97 What you can do with a Windows computer 98 Using the Intelli-studio program 105 Transferring videos/photos from the camcorder to your

computer

contents

CONNECTING TO OTHER

DEVICES

107

MAINTENANCE & ADDITIONAL

INFORMATION

110

TROUBLESHOOTING

SPECIFICATIONS

107 Connecting to a TV 108 Viewing on a TV screen 109

Recording (dubbing ) images on a VCR or DVD/HDD recorder

110 Maintenance 111 Additional information 113 Using your camcorder abroad

114 Troubleshooting

127 Specifications

06_English

quick start guide

English_07

+

This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information.

You can record videos in H.264 format!

You can record videos in H.264 format, which enables you to conveniently email and share videos with your friends and family. You can also take photos with your camcorder (SMX-C13/C14 only).

Step1: Get ready

1. Insert a memory card. ¬page 39

• You can use commercially available SDHC (SD High Capacity) or MMC plus cards with this camcorder.

• Set the appropriate storage media. (SMX-C13/C14 only)

2. Insert the battery into the battery slot. ¬page 16

• Gently slide the Battery

pack release switch in the direction as shown in the ﬁ gure.

[Battery pack release] Switch

󱈢

quick start guide

Step 2: Record with your camcorder

LCD screen

{

Zoom lever

~GGGG{

PHOTO ( ) button (SMX-C13/C14 only)

CHG indicator Recording start/stop button

RECORDING VIDEOS WITH H.264 FORMAT

Your camcorder uses advanced H.264 compression technology to realise the clearest video quality.

page 106

1. Open the LCD screen.

2. Press the Power (

) button.

RECORDING PHOTOS (SMX-C13/C14 ONLY)

1. Open the LCD screen.

2. Press the Power (

3. Press the PHOTO (

ready.

) button.



) button fully when you are

3. Press the Recording start/stop button.

• To stop recording, press the Recording start/stop button.

0:00:00 [245Min]

• Your camcorder is compatible with H.264 recording format, which achieves efﬁ cient coding of high quality video with less capacity.

• You can record videos in SD(standard deﬁ nition). The default setting is “TV Fine (720x480/60i)”.¬ page 58

• You can not take photos while you are recording videos.

08_English

Step 3: Play back videos or photos

English_09

~GGGG{

{

VIEWING THE LCD SCREEN OF YOUR CAMCORDER

You can ﬁ nd your desired recordings quickly by using the thumbnail index view.

1. Press the Mode ( ) button to select the Play mode.

• The thumbnail index view appears. The thumbnail of the latest created or played ﬁ le is highlighted.

2. Set the Play Mode to “Video” or “Photo”. (SMX-C13/C14 only)

• Press the MENU button. Use the Control button to select “Play Mode”



“Video” or “Photo”.

3. Use the Control button to select a desired video or photo, and then press the Control button (OK).

• Setting the Play Mode menu is available in thumbnail view only. (SMX-C13/C14 only)

• The photo function is available with model SMX-C13/C14 only.

VIEWING ON A TV

• You can enjoy detailed, brilliant quality videos on a connected TV. ¬page 108

Step 4: Save recorded videos or photos

Simple and fun! Enjoy the various features of Intelli-studio on your Windows computer.

Using the Intelli-studio program built in your camcorder, you can import videos/photos into your computer, edit or share the videos/photos with your friends. For details, see page 98.

Video

Play Mode

Video

Photo

Exit

(SMX-C13/C14 only)

quick start guide

IMPORTING AND VIEWING VIDEOS/PHOTOS FROM THE CAMCORDER TO YOUR PC

1. Launch the Intelli-studio program by connecting the camcorder to your

PC via the USB cable.

• A new ﬁ le saving screen appears with the Intelli-studio main window. Click “Yes”, the uploading procedure will start.

2. Click “Import folder” to import the videos or photos from the PC to the Intelli-studio, you will see the ﬁ les location on the Intelli-studio browser.

3. You can double-click on the ﬁ le you would like to start playing.

Folders directory on your PC

“Import folder” button

Imported Files

SHARING VIDEOS/PHOTOS ON YouTube/Flickr

Share your contents with the world, by uploading photos and videos directly to a web site with a single click. Click on the “Share” “Upload to Share Site” tab on the browser. ¬ page 101

The Intelli-studio runs automatically once the camcorder is connected to a Windows computer (when you specify “PC Software: On”).¬ page 94

Step 5: Delete videos or photos

If the storage media is full, you cannot record new videos or photos. Delete videos or photos data that have been saved on a computer from the storage media. Then you can record new videos or photos on newly freed-up space.

Press the Mode ( ) button to switch the Play mode Press the MENU buttonControl button (S/T /W/X/OK) to select "Delete." ¬page 73

The photo function is available with models SMX-C13/C14 only.

10_English

getting to know your camcorder

WHAT'S INCLUDED WITH YOUR CAMCORDER

Your new camcorder comes with the following accessories. If any of these items are missing from your box, call Samsung’s Customer Care Center.

The exact shape of each item may vary by model.

Battery pack

(IA-BH130LB)

AD43-00190A

Hand strap

AD63-04220A

•

The contents may vary depending on the sales region.

•

Parts and accessories are available for purchase at your local Samsung dealer. SAMSUNG is not responsible for reduced battery life time or malfunctions caused by any unauthorized use of accessories such as the AC adaptor or the batteries.

•

A memory card is not included. See page 40 for memory cards compatible with your camcorder.

•

Your camcorder includes a user manual CD and a quick start guide (printed).

•

* : This is an optional accessory. To buy one, contact your nearest Samsung dealer.

AC power adaptor

(AA-MA9 type) AD44-00151A

Quick start guide

AD68-03824A

Audio/Video Cable

AD39-00168A

User manual CD

AD46-00256A

USB Cable

AD39-00169A

Carrying Case*

English_11

~GGGG{

{

getting to know your camcorder

FRONT & LEFT VIEW

1 2

7 9 10 11

53 4 6 13

Internal microphone USB jack ( )

Lens Display (

Recording start/stop button Mode ( ) button

Control button (S/T/W/X/ OK), Zoom(W/T) button EASY Q button

MENU button Hand strap hook

LCD screen PHOTO (

Power

( )

Built-in speaker Share (

CAUTION

button Zoom lever (W/T)

Be careful not to cover the internal microphone and lens during recording.

12_English

(SMX-C13/C14 only)

~GGGG{

) button

) button (SMX-C13/C14 only)

) button

REAR & BOTTOM VIEW

English_13

Charging indicator (CHG) Memory card slot

Recording start/stop button Battery pack slot

AV cable jack (AV) Jack/ Battery pack/ Memory card cover

DC IN jack (DC IN) Tripod receptacle

Battery pack release switch

Usable Memory Cards

(32GB Max)

SDHC

MMCplus

preparation

~GGGG{

{

vwlu

This section provides information that you should know before using this camcorder; such as how to use the provided accessories, how to charge the battery, and how to setup the operation mode and initialise setup.

USING THE HAND STRAP

Attach the strap and place your hand through the loop to prevent the camcorder from damage by being dropped.

ADJUSTING THE LCD SCREEN

The wide LCD screen on your camcorder offers high quality image viewing.

1. Open the LCD screen with your ﬁ nger.

• The screen opens up to 90°.

2. Rotate the LCD screen towards the lens.

• You can rotate it up to 180° towards the lens and up to 90° backward. To view recordings more conveniently, rotate the screen by 180° towards the lens, then fold it back to the body.

WARNING

Excessive rotation may damage the connective hinge between the screen and the camcorder.

• Remove ﬁ ngerprints or dust on the screen with a soft cloth.

• When the LCD screen is rotated by 180° toward the lens, the left and the right sides of the subject are shown in reverse as if you were looking at a mirror. This is not a problem and does not affect the image being recorded.

14_English

English_15

BASIC CAMCORDER POSITIONING

Use both hands while taking a video or picture to prevent the camcorder from shaking. Try to avoid any slight movement while shooting.

Adjusting the shooting angle

Aim the camcorder as shown in the illustration.

1. Hold the camcorder with both hands.

2. Hook up the hand strap to ﬁt to hand.

3. Make sure your footing is stable and there is no danger of colliding

with another person or object.

4. Aim and focus as shown in the illustration.

• This camcorder lens shooting angle is approx. 25˚ higher than the rest of the camcorder body. Make sure the camcorder lens is angled for proper shooting.

• It is recommended to keep the sun behind you while shooting.

preparation

CONNECTING A POWER SOURCE

•

Be sure to charge the battery pack before you start using your camcorder.

•

Use the IA-BH130LB battery pack only.

•

The battery pack may be charged a little at the time of purchase.

Battery pack insertion/ejection

It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.

Inserting the battery pack

1. Slide and open the battery slot cover as shown in the ﬁ gure.

2. Insert the battery pack into the battery slot until it locks.

•

Make sure that the SAMSUNG logo is facing left while

the battery pack is placed as shown in the ﬁ gure.

3. Slide and close the battery slot cover.

Ejecting the battery pack

1. Slide and open the battery slot cover and push the Battery pack release switch.

•

Gently push the Battery pack release switch in the direction

as shown in the ﬁ gure to eject the battery.

2. Pull the ejected battery out in the direction as shown in the ﬁ gure.

3. Slide and close the battery slot cover.

•

Remove the battery pack separately from the camcorder while not in use.

•

It is recommended to prepare an additional battery pack for prolonged outdoor use.

•

Additional battery packs can be purchased from samsungparts.com.

Insert

Eject

[Battery pack release] Switch

16_English

+ 113 hidden pages