Samsung SMT-3211PVM-PIP, SMT-3211PVM User Manual
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124
www.hanwhasecurity.com
PUBLIC VIEW MONITOR
User Guide
SMT-3211PVM-PIP & SMT-3211PVM
Public View Monitor
User Guide
Copyright
©2018 Hanwha Techwin Co.,Ltd.Allrightsreserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Hanwha Techwin reserves the right to change the contents of this document without prior notice.
Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
Equipment shall be installed in accordance with the latest local/national codes of practice, and standards eg :- UL 1203 Edn. 5, CSA22.2 No30-M1986 Edn1 rea rmed 2012, CSA C22.2 No25-1966 rea rmed 2014, CSA C22.2 No 60065-03 Edn. 1, UL60065 Edn. 7,
contents |
mechanical |
|
CABINET |
GENERAL |
1.1 |
Scope |
4 |
|
4 |
1.2 |
Safety Precautions |
4 |
|
1.3 |
Before You Begin |
5 |
||
FUNCTIONAL |
2.1 |
Functional Specifications |
7 |
|
SPECIFICATIONS |
|
|
|
|
7 |
|
|
|
|
CONTROLS AND |
3.1 |
Connectors |
8 |
|
INDICATORS |
3.2 |
Control Buttons (on the back) |
9 |
|
3.3 |
Bottom Panel View (PIP model only) |
10 |
||
8 |
||||
3.3 |
LED Indication |
10 |
||
|
3.4 |
Remote Control |
11 |
|
|
3.5 |
Accessories |
11 |
Material: Metal. Finish: Black |
|
|
|
|
DIMENSIONS |
|
|
|
MECHANICAL |
Unit: mm(inch) |
|
|
|
|
|
|
|
|
|
30.12” |
|
2.31” |
18.58” |
|
|
|
|
||
|
|
|
|
|
27.56” |
|
1.26” |
7.87” |
|
|
|
|
||
|
|
|
3.94” |
|
15.53” |
20.26” |
|
|
3.94” |
|
|
|
|
M4X8L(8pcs) |
|
|
1.84” |
|
|
Net Weight: 13.6Kg /30 lbs.
Shipping Weight: 17.19Kg / 37.91lbs.
Packing Dimension (W x H x D): 896x666x214mm / 35.31 x 26.25 x 8.46 inch
VESA MOUNTING
MTBF shall be 30,000 hours minimum at 90% confidence level and 100% duty cycle continuous |
o |
|
operation at 25 C. The calculation does not include LCD panel. |
|
|
VESA |
Spec. of screw hole |
|
100x100 mm |
M4 x 8mm |
|
200x100 mm |
|
|
Use appropriate screws to mount VESA bracket (Screw hole: M4 x 5mm), failure to do so may cause serious injury.
Ensure that the VESA bracket has an adequate size mounting plate, screws and/or fixings to support the weight of the monitor and bracket to the surface to which it is being attached. Failure to do so may cause serious injury.
If there is any doubt of the suitability of a mount or fixing method, a qualified technician should be consulted.
Caution
This 21.5” / 27” PVM is intended to be fixed to a surface during use. Use a bracket rated for the weight of the unit. Follow the bracket instructions for fixing to a surface.
19
Loading...