![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg1.png)
8. Level 3 Repair
8-1. Components Layout
Samer AL Bairakdar
Samer AL Bairakdar
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg2.png)
8. Level 3 Repair
8-2. Block Diagram
Samer AL Bairakdar
Samer AL Bairakdar
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg3.png)
8. Level 3 Repair
Samer AL Bairakdar
Samer AL Bairakdar
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg4.png)
TP_TDMB_SPI_MISO
TP_TDMB_SPI_MOSI
8. Level 3 Repair
Samer AL Bairakdar
Samer AL Bairakdar
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg5.png)
8. Level 3 Repair
8-3. Flow Chart of Troubleshooting
Samer AL Bairakdar
Samer AL Bairakdar
Oscilloscope Digital Multimeter
Power Supply + driver, ESD Safe Tweezer
8960 & Spectrum Analyzer Soldering iron
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg6.png)
8. Level 3 Repair
8-4. Power On
Mobile phone does not power on.
Check the Battery
Is it more than 3.8V?
Voltage.
Yes
Power-on the phone and
check the power-on sound
or motor Vibration.
Sound or Vibration is ok?
Check the voltage level at
ANT6002 or R6015 while pressing
power key. Is the voltage high?
Yes
Check the signal of
PMIC_PWR_HOLD =
Check the Clock OSC5000
Is the frequency 24Mhz?
check the initial operation
1.8V
END
Yes
Yes
No
Yes
Samer AL Bairakdar
Samer AL Bairakdar
No
If its voltage level is extremely low(under 3.0V),
Yes
Charging the battery by TA.
Change the battery.
Change the FRONT-LCD ASSY
Abnormal
Replace the POWER KEY FPCB.
No
No
Check the output voltage of U5004
(L5002 = 0.8V, L5004 = 0.8V, L5003 = 0.8V, L5005 = 1.35V,
L5006 = 2.0V, C5006 = 1.8V and other LDO Voltage.)
If the output voltage is not normal, Change the U5004.
※ Each volta
Replace the OSC5000.
e level has ±10% margin.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg7.png)
8. Level 3 Repair
8-4-2. Initial
Initial Failure.
Yes
Re-download latest
SW on the mobile
Re Check "8-4-1 Power on"
Trouble shooting process
Change UCP400
Change PBA
phone.
END
Abnormal
Normal
Abnormal
Abnormal
Samer AL Bairakdar
Samer AL Bairakdar
Check the OSC5000 (Crack, open etc.)
Check the U5004(Crack etc
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg8.png)
8. Level 3 Repair
8-4-3. No Service
Check menu setting
Settings → Mobile networks → Network mode → Is setting auto connect ?
No service
Yes
Home screen → Phone → Keypad
→ *#1234# → check Phone version
→ CP : T285XXXX or unknown
CP : unknown
Check the voltage level
C2049 = 1.8V C2050 = 1.2V
C2050 = 1.2V C2052 = 1.2V
C2054 = 1.2V C2057 = 1.2V
C2036 = 1.8V C2059 = 1.8V
Yes
Check TCX2000
Frequency = 26MHz
Yes
Replace UCP400
Yes
END
Samer AL Bairakdar
Samer AL Bairakdar
CP : J710XXX
Check the connection of RF coaxial cable
No
No
Replace the TCX2000
Replace the U2002
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bg9.png)
8. Level 3 Repair
8-4-4. Sim Part(SIM1)
Insert SIM card
Change to the new
SIM card. Work
nomal?
Is SIM socket ok?
Check the SIM
Voltage.
C5098 >= 1.8 or
3.0 V
Check that SIM
RST/IO/CLK.
(ZD5001,ZD5002,
ZD5007)
has signal
END
Yes
No
Yes
Yes
Yes
Samer AL Bairakdar
Samer AL Bairakdar
Yes
END
No
Resoldering SIM socket pad
No
Check the U3003 and U5004
No
Check the UCP400 (Crack etc)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bga.png)
8. Level 3 Repair
8-4-4. Sim Part(SIM2)
Insert SIM card
Change to the new
SIM card. Work
nomal?
Is SIM socket ok?
Check the SIM
Voltage.
C5053 >= 1.8 or
3.0 V
Check that SIM
RST/IO/CLK.
(C5085, ZD5005,
C5084)
has signal
END
Yes
No
Yes
Yes
Yes
Samer AL Bairakdar
Samer AL Bairakdar
Yes
END
No
Resoldering SIM socket pad
No
Check the U5004
No
Check the UCP400 (Crack etc)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bgb.png)
8. Level 3 Repair
8-4-5. Charging Part
TA / USB Insert
Yes
Charging Sequence Start
VBUS_IF_5P0(C5000) = 5V
Yes
Battery is Charging?
Yes
END
Samer AL Bairakdar
Samer AL Bairakdar
No
No
Check the U5000 (Crack etc)
Check the U5000 (Crack etc)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bgc.png)
8. Level 3 Repair
8-4-6. OTG
Check VBUS_IF_5P0(C5000) = 5V
Check the LXCHG(L5000) = 5V
END
END
Yes
Yes
Yes
Samer AL Bairakdar
Samer AL Bairakdar
No
Check the U5000 (Crack etc)
No
Check the U5000 (Crack etc)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bgd.png)
8. Level 3 Repair
8-4-7-2. Proxy Sensor
Proxy Sensor does not work.
Yes
Check Short
ZD6001, ZD6002
No
CHECK PROXY_INT
R6022
CHECK PROXY_SCL, SDA
R4050 R4051
END
Samer AL Bairakdar
Samer AL Bairakdar
YES
NO
NO
REPLACE ZD6001, ZD6002
REPLACE U6004
CHANGE PBA
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
![](/html/11/118f/118f2b67a42a04f81fd5c390d3ed0fac051b0431de7e452ed7d728d508228501/bge.png)
8. Level 3 Repair
8-4-7-3. Accel Sensor
Accel sensor does not work
Yes
Check voltage 1.8V
C6032 C6060
Yes
Check ACC_INT
TP6000
Check SENSOR_SCL,
SDA
R4048 R4049
END
YES
Samer AL Bairakdar
Samer AL Bairakdar
no
no
REPLACE C6032 C6060
REPLACE U6003
no
CHANGE PBA
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.