7-1. Pre-requisite
Tweezers / Disass'y Stick / Screw Driver
Anti-static Mat
A OCTA Disassembly Holder
Anti-statoc Gloves
Hot Plate
Confidential and pr oprietary-the c ontents in this ser vice guide subject to change wi thout prior noti ce
Distribution, t ransmissio n, or infrin gement of an y c ontent or data from this d ocument without Samsung’s written authorization is strict ly prohibited.
Ethyl Alcohol Cotton Swab
7-2. Parts which must be changed after repair
BOM Description Picture Remarks
A/S-SVC TAPE MAIN WIN
[GH81-14126A]
CONDUCTIVE GASKET-LCD
TAPE
[GH02-13551A]
A/S-MEN U ,BACKE Y TO P
TAPE
[GH81-14157A]
Replace when
repair LCD part
Confidential and pr oprietary-the c ontents in this ser vice guide subject to change wi thout prior noti ce
Distribution, t ransmissio n, or infrin gement of an y c ontent or data from this d ocument without Samsung’s written authorization is strict ly prohibited.
1) Put the device in the chamber for
Remove LCD CONNECTER CAP.
Detach bracket assy and Rear.
7-3. Disassembly
※ Caution
1) Be care of scratch and time.
10 minutes under 60℃
※ Caution
1) Be care of scratch
2) Be care of LCD FPCB CONNECTOR
※ Caution
1) Be care of scratch
※ Caution
1) Be care of REAR damage
Confidential and pr oprietary-the c ontents in this ser vice guide subject to change wi thout prior noti ce
Distribution, t ransmissio n, or infrin gement of an y c ontent or data from this d ocument without Samsung’s written authorization is strict ly prohibited.