All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
2005 Samsung Telecommunications America, L.P. is a
registered trademark of Samsung Electronics America, Inc. and
its related entities.
GH68-08398A
Printed in Korea
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Section 1: Getting Started ................................. 5
Activating Your Phone ......................................................6
Powering On or Off the Phone ........................................10
Setting Up Your Voice Mail .............................................11
Section 2: Understanding Your Phone ............ 13
Features of Your Phone .................................................. 14
Open View of Your Phone ............................................... 15
Front View of Your Phone ...............................................17
Care and Maintenance ................................................. 161
Table of Contents
Table of Contents3
Section 12: Warranty Information .................163
Standard Limited Warranty ...........................................164
Index ..............................................................203
Tab l e of Co n t ents
4
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Powering On or Off the Phone
• Setting Up Your Voice Mail
This section describes how to start using your phone
by activating your service and setting up your voice
mail.
Section 1: Getting Started5
Section 1
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM
card is provided loaded with your subscription details,
such as your PIN and other optional services available.
Removing the Battery
1. If necessary, power-off the phone by holding down the
key until the power-off image displays.
2. Remove the battery by sliding the battery lock up and
holding it in position, then lift the battery away, as
shown.
Section 1
6
Activating Your Phone
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratches or bending. Use caution when inserting or removing the card
and keep all SIM cards out of reach from children.
Make sure the gold contacts of the card face into the
phone, then slide the SIM card into the socket.
Removing the SIM Card
To rem ove the SIM card, s lid e it awa y from t he c ross-ba r.
See the following illustration.
Section 1
Section 1: Getting Started7
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the
phone.
2. Press the battery down until it clicks into place. Make
sure that the battery is properly installed before
switching on the phone.
Section 1
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
Use the travel adapter to charge the battery, and use only
Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately
200 minutes. You can use the phone while the battery is charging, but this
causes the phone to charge more slowly.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
8
Activating Your Phone
2. Plug the adapter into a standard AC wall outlet. When
charging is finished, unplug the adapter from the power
outlet.
3. Press the buttons on both sides of the connector (1) and
(2) pull the connector out.
Note: You must unplug the adapter before removing the battery from the
phone during charging to avoid damage.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Warning
Section 1: Getting Started9
Section 1
Low Battery” message repeats at regular intervals on the
display. The backlight turns off to conserve the remaining
battery power.
When the battery level becomes too low, the phone
automatically turns off.
Powering On or Off the Phone
1. Open the phone.
2. Press and hold the key until the phone power-on
screen displays.
3. If the phone is locked, enter the phone password and
press the OK soft key or the key. The password is
Section 1
Note: The display language is preset to Automatic at the factory. To change
the language, use the Language menu. For further details, see
“Language” on page 89.
preset to “00000000” at the factory. For further details,
see “Change Password” on page 104.
4. If the phone asks for a PIN, enter the PIN and press the
OK soft key or the key. For further details, see “PIN
Check” on page 103.
The phone searches for your network and after finding it,
the Idle screen displays. Now, you can make or receive
calls.
5. When you wish to switch off the phone, press and hold
the key until the power-off image displays.
10
Setting Up Your Voice Mail
Setting Up Your Voice Mail
To access you voice mail from your keypad, use the
following steps:
1. Open the phone to access your keypad.
2. From an Idle screen, press and hold the key.
3. Follow the voice mail prompts to access messages.
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Recent Calls and press the key.
3. Highlight Voice Mail and press the key.
4. Highlight Connect to Voice Mail and press the OK soft
key or the key.
5. Voicemail appears in the display.
6. Press the OK soft key or the key to dial your phone
specified voice mail number.
7. When connected, follow the voice prompts from the
voice mail center.
Changing the Voice Mail Number
Your SIM card gives you default service number of the
voice mail center. However, you may need to change the
number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Recent Calls and press Select soft key or the
key.
Section 1: Getting Started11
Section 1
3. Highlight Voice Mail and press the Select soft key or the
key.
4. Highlight Voice Server Number and press the OK soft
key or the key.
5. Highlight Voicemail and press the OK soft key or the
key.
6. Press the Edit soft key to modify the number.
Note: Pressing the key takes you directly into Edit mode.
7. Enter your new Voice Server number and press the OK
soft key to save.
Section 1
8. Press the key to return to Idle mode.
12
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Front View of Your Phone
• Side View of Your Phone
• Display Layout
• Selecting Functions and Options
• Command Keys
This section outlines some key features of your phone.
It also displays the screen and the icons that are
displayed when the phone is in use.
Section 2
Section 2: Understanding Your Phone13
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of
the features included in your phone.
User friendly, menu driven access to features and options.
• Instant Messaging capability
• Multimedia capability
• Speakerphone capability
• Featured applications provide alarms, calendar, calculator,
record audio, converter, timer, stopwatch, and world time.
Section 2
14
Open View of Your Phone
Open View of Your Phone
The following illustrations show the main elements of
your phone:
Keys
The following list correlates to the open and front view
illustrations.
1. Display: This screen displays all the information needed
to operate your phone.
2. Soft key: Performs the functions indicated by the screen
text on the bottom of the display.
3. Send key: Allows you to place or receive a call. In
standby mode, press the key once to access the Recent
Call log. If you press and hold the key down, you will
initiate the most recent call from the Recent Call log.
Section 2: Understanding Your Phone15
Section 2
Section 2
16
4. Clear key: Deletes characters from the display when you
are in text entry mode. When in a main menu, press to
return to the previous menu.
5. Voicemail key: Press and hold to automatically dial your
voicemail.
] character for calling
6. Asterisk/Shift key: Enters the
features. In text mode, press to change the character
input type.
7. Power Interface Connector: The power interface
connector is used to plug in the charging accessories.
8. Microphone: The Microphone allows the other callers to
hear you clearly when you are speaking to them.
9. Pound/Space/Quiet Mode key: Enters the pound
character for calling features. In text entry mode, press
to enter a space between characters. Press and hold to
place handset in Quiet mode.
10. Alphanumeric keypad: Use these keys to enter
numbers, letters and characters.
11. WAP Browser/Menu confirm key: When navigating
through a menu accepts the highlighted choice in the
menu. If you press once in Idle mode, the WAP browser
will launch.
12. End key: Ends a call. Press and hold this key for a few
seconds to power your phone On or Off. While in the
main menu, it returns the phone to standby mode and
cancels you input. When you receive an incoming call,
press to reject call.
13. Navigation key: This key allows you to scroll through
phone menu options and provides a shortcut to phone
functions from standby mode.
[
*
[#]
Front View of Your Phone
14. Earpiece: The earpiece allows you to hear the other
caller.
Front View of Your Phone
Keys
The following list correlates to the open and front view
illustrations.
1. Headset Connector: Allows you to plug in a headset for
safe, convenient, hands-free conversations.
1. Volume/Menu Navigation key: Allows you to adjust the
ringer volume in standby mode or adjust the voice
volume during a call. The volume key can also be used
to scroll up or down to navigate through the different
menu options. To mute the ringer during an incoming
call, press the volume key up or down.
2. Front LCD: Your phone has an external display on the
front of the phone. It indicates when you have an
incoming call or message. It also displays date, time,
reception, battery power, and any icons associated with
alerts, such as messages, or a set alarm.
3. Antenna: Used to obtain maximum reception.
Section 2
Section 2: Understanding Your Phone17
Back Light
A back light illuminates the display and the keypad when
you press any key or open the phone. It turns off when no
keys are pressed within a given period of time, and/or
dims the light, depending on the settings in the Back Light menu.
Internal Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the
Section 2
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified time.
For details, see page “Alarm” on page 128.
Appears when you there is no network coverage available.
18
Selecting Functions and Options
Appears when a call is in progress.
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For
details, see page “Call Forwarding” on page 113.
Appears when incoming call Alert Type is set to Vibration.
Appears when an incoming call Alert Type is set to
Vibration then Melody.
Appears when Quiet Mode, Silent All is active.
Appears when Quiet Mode, Vibration All is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Selecting Functions and Options
Your phone offers a set of functions that can be
customized for your ease and specific needs. These
functions are arranged in menus and sub-menus,
accessed using the two soft keys. Each menu and submenu allows you to view and alter the settings of a
particular function.
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key or the
key.
When you access a list of options, your phone highlights
the currently active option. If, however, there are only two
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
Section 2
Section 2: Understanding Your Phone19
Selecting Options
To view the various functions and options available and
to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press
the Select soft key or the key.
• To view the next function or highlight the next option on a list,
press the Down key or the key on the left side of the phone.
• To move back to the previous function or option on a list, press
the Up key or the key on the left side of the phone.
• To move back up one level in the menu structure, press the Left
navigation key or the Back soft key.
• To exit the menu structure without changing the settings, press
the key.
Command Keys
Functions for the soft keys are defined by what appears
above each in the display. There are two soft keys, the left
soft key and the right soft key .
Soft Keys
Section 2
The roles of the soft keys vary depending on the function
you are currently using; the labels on the bottom line of the
display just above each key indicate their current role.
20
Command Keys
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key to open
the Menu screen.
• When in a menu mode the left soft key function is Select.
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the IM (right) soft key to open the
Instant Message Menu screen.
• When in a menu mode the right soft key function is Back.
Clear Key
The CLR key is used to erase or clear numbers, text, or
symbols from the display. You can also use to return
to a previous menu or to return to standby mode from any
menu.
• If you enter an incorrect character, briefly press to
backspace (and delete) the character.
Section 2: Understanding Your Phone21
Section 2
• To erase the entire sentence, press and hold .
• To back up one menu level, briefly press .
End Key
The End key is used to turn on/off your phone,
disconnect calls, and return to the standby mode.
• Press and hold the End key to turn on your phone.
• Briefly press once to disconnect a call.
• Press to return to standby mode from any menu, or to
cancel the last input.
Send Key
The Send k ey i s u s ed t o a n s we r ca l l s, d ia l ca l l s, a nd t o
recall the last number(s) dialed, received, or missed.
• Press once to answer calls.
• Enter a number and briefly press to make a call.
• Briefly press in standby mode to display a list of recent
calls to and from your phone.
• Press twice in standby mode to call the most recent
number.
Section 2
• Press to pick up a waiting call. Press again to switch
back to the other call.
Navigation Key
Use the directional keys on the navigation key to browse
menus, sub menus, and lists. Press the up or down
navigation when jumping to highlighted links on the
web.
Each key also acts as a shortcut to launch applications. All
navigation keys are setup as *User-Defined Shortcut
22
Command Keys
Keys. To set the shortcut key functions see “Using
Shortcuts” on page 39.
Speakerphone Key
During a call, use the speakerphone key in conjunction
with the left soft key to activate the speakerphone
operation. Use the volume keys (located on the left side of
your phone) to adjust the volume.
Section 2
Section 2: Understanding Your Phone23
Section 2
24
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Recent Calls
•Quiet Mode
• Options During a Call
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3: Call Functions25
Section 3
Making a Call
When the Idle screen displays, enter the area code and
phone number, and press the key.
Note: When you activate the Auto Redial option in the Extra Settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone. See page “Extra Settings”
on page 90 for further details.
Making an International Call
1. Press and hold the key. The + character appears.
2. Enter the country code, area code, and phone number.
Press the key.
Correcting a Dialed Number
Use the following steps to correct a mis-typed entry when
dialing.
1. After dialing a number
䢇 To clear the last digit displayed, press the key.
䢇 To clear another digit in the number, press the Left or Right
navigation key until the cursor is immediately to the right of the
digit to be cleared. Press the key.
䢇 To enter a missing digit press the Left or Right navigation key
until the cursor is in position and enter the digit.
䢇 To clear the whole display, press and hold the key. The
Idle screen displays.
2. Press the key to return to the Idle screen.
Ending a Call
Section 3
When you want to finish your call, briefly press the key.
26
Loading...
+ 148 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.