Samsung SGHI307 Users Manual

SGH-I307 Installation Guide and User manual

Installation Guide

SGH-I307

And User Manual

SGH-I307 Installation Guide and User manual

for devices over several radio frequency bands

Band 4 (AWS)(1700/2100MHz)

•

Band

5 (850MHz)

1. Introduction

The SGH-I307 Module is a module on board(MOB) that provides LTE and HSPA+ connectivity

The SGH-I307 will be AT&T-certified, and Windows 8 Mobile Broadband Interface Model(MBIM) compliant.

Supported RF bands

The modem, based on Qualcomm’s MDM9200 baseband processor, Supports data operation on LTE and HSPA+ networks.

Table. Supported RF bands

Technology Bands Notes

LTE

HSPA+

GNSS

•

• Band 17 (700MHz)

• Band 1 (2100MHz)

• Band 2 (1900MHz)

• GPS (1575.42MHz)

• GLONASS (1602MHz)

MISO support

Diversity support

SGH-I307 Installation Guide and User manual

Physical features

• SGH-I307 : 50mm X 30mm X 2.7mm

• Operating temperature range : -20 to 60 Celsius temperature

Modem features

SGH-I307 Installation Guide and User manual

PSS/SSS/MIB d

initiated dedicated bearer

Network

initiated detach followed by connection release

LTE features

• Basic cell selection and system acquisition

- SIB1-SIB8, SIB10, SIB11 decoding

• NAS/AS security procedures

- Snow 3G/AES security

• CQI/RI/PMI reporting

• Paging procedures

- Paging in idle and Connected mode

• Dedicated bearer

- Network-initiated dedicated bearer

• Connected mode intra-LTE mobility

• iRAT between LTE/3G for idle and connection release with redirection

• Detach procedure

- Network-initiated detach with reattach required

ecode

SGH-I307 Installation Guide and User manual

pyq g

Position location (GNSS)

• Concurrent standalone GPS and GLONASS

• Assisted GPS ( A-GPS) SUPL1.0

• Assisted GNSS ( A-GPS) SUPL2.0

• gpsOneXTRA2.0 with GPS + GLONASS support

Standards Compliance

The SGH-I307 Module complies with the mandatory requirements described in the following standards. The exact set of requirements supported is carrier-dependent.

+ 13 hidden pages