MANUAL SERVICE
80-SDC
© Samsung Electronics Co.,Ltd. Jan. 2000
Printed in Korea
AD68-00079L
DIGITAL CAMERA
SDC-80
SERVICE Manual
DIGITAL CAMERA |
|
CONTENTS |
1. Introduction
2. Specifications
3. Disassembly and Reassembly
4. Exploded View and Parts List
5. Adjustment
6. Electrical Parts List
7. PCB Diagrams
8. Wiring Diagram
9. Schematic Diagrams
UPDATE LOG SHEET
Application Data |
Page |
Part # |
Note(Cause & Solution) |
S/Bulletin # |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this page to keep any special servicing information. (Service Bulletin, etc.) If only parts number changes, Just change parts number directly on parts list. And if you need more information, please see the service bulletin
1. Introduction
1-1. Camera Adjustment Program
1-1-1. About the Program
The program is to adjust a camera and diagnose a fault when the unit is serviced. The program isn't provided for customers and only service center to check the camera setting without disassembling and read/modify the camera control value. Some functions not required in service center aren't used.
1. Provision for program
The program isn't provided with the additional disc and must be downloaded from Single.
2.System Requirements
1.IBM compatible PC (pentium standard)
2.Windows 95 & Mouse
3.Video Card supported more than 256 color
4.5MB Hard disk space
3.Program Functions
1.SSFDC(SMART MEDIA) FORMAT, DELETE ALL
2.FUNCTION KEY TEST
3.LCD PIXEL TEST
4.LOGO TEST
5.CONTROL LED TEST, LCD PANEL TEST
6.MACRO MODE CHECK, VIDEO JACK TEST, STROBO (FLASH) JACK CHECK
7.OSD (ON SCREEN DISPLAY) OFF
8.PC SHOT, SELF TIMER SHOT
9.AE ADJUSTMENT
10.3100K, 5100K WHITE BALANCE ADJUSTMENT
11.JPEG, THUMBNAIL DOWN LOAD
12.BACK FOCUS ADJUSTMENT MODE
13.POWER CONSTANT ON
14.RS-232C CHANGER TEST
15.NTST, PAL CONVERT ADJUSTMENT
4.Installing Program
1.Unzip the Dscstudi.zip file downloaded from Single in a folder.
2.Execute the Setup.exe file in the unzipped files.
3.Install as dialog box's message.
4.After completing the installation, check to run the DSCStudio.exe file in the folder where program is installed.
* Generally, it is created in C:\Program files\Samsung\DSCStudio.
Samsung Electronics |
1-1 |
Introduction
1-1-2. DSCStudio Description
• Program start : Turn on PC for Windows Connect PC with camera
Power on camera
Execute DSCStudio.exe in Windows
Start DSC |
|
Set up Communication |
|
|
studio. |
|
port and communication |
|
|
|
|
speed.(see Figure 4) |
|
|
(Figure 1) Initial screen dialog box |
(Figure 2) Choice screen dialog box |
TAP
(Figure 3) Basic communication dialog box |
|
||
About TAP : • Camera Adjustment I |
: (see Figure 5) |
•Camera Adjustment II : (see Figure 6) |
|
• View Graphic File |
: (see Figure 7) |
•Test Options |
: (see Figure 8) |
• PGM for Manufacturing : (see Figure 9)
1-2 |
Samsung Electronics |
Introduction
(Figure 5) Camera Adjustment I
•Describe the relevant things only in (Figure 4).
1.In the DCAM_PARAMETER, the DTL_Glain value is used for HeXa value.
For instance, if DTL_Gain=2631720 is translated into HeXa, it means 0x282828. So y=0x28, Cr=0x28 and Cb=0x28.
2.In the LCD_Control, the settings are EVR value and also affect LCD output.
3.The Color Bar ON/OFF option can be used to display color bar with LCD and VIDEO OUT.
4.The Update option can be used to write the currently displayed number with EEPROM.
5.The Restore option can be used to restore to the first loaded value (EEPROM value before updating).
6.The Format option can be used to write the EEPROM default value saved in dscdtuio007.ini. of the window folder.
("0xff" is the initially empty EEPROM value.)
Note) The Format is similar to the Format with LCD option without LCD control value.
7.The Reload option can be used to display the currently recorded EEPROM value on the screen.
*Note
-The model set value is 007 in the PGM mode. However, error occurred when 80 sets are connected to adjust.
-Make sure that the testing model is the same with the running model in program.
1-4 |
Samsung Electronics |
Introduction
(Figure 7) View Graphic File
•The JPEG image can be displayed without any image edit program.
1.Click the Open button to display the file saved as a JPEG format.
2.Click the Slid Show button to display the file containing in the option at an specified interval.
1-6 |
Samsung Electronics |
Introduction
11.Black Level Adj:
12.AE Adjustment: Adjust the Hall value automatically.
13.3100K W/B test : Set 3100K(incandescent light temperature) white balance. 14.5100K W/B test : Set 5100K(fluorescent light temperature) white balance. 15.Thumbnail Down load : Transfer thumbnail image in the smart media card into PC. 16.JPEG Down Load : Transfer image in the smart media card into PC.
17.Shot 0: Function SHUTTER in camera photo mode. 18.Shot 0: Function SHUTTER in camera photo mode. 19.Shot 0: Function SHUTTER in camera photo mode.
(Figure 9) PGM for Manufacturing
•Run the PI program.
The settings of the Test Options (see Figure 7) are applied as a sequence. Click the START button to run.
The edit function is enabled when Vs appear in the check boxes of Enable Scroll Inspect Item Window and Enable Scroll Information Window.
1-8 |
Samsung Electronics |
2. Specifications
System |
Specifications |
||
CCD |
|
Progressive 0.85M pixel |
|
Number of pixels |
|
1024 x 768 pixel (XGA) |
|
Color Depth |
|
24 bits True Color |
|
Memory capacity |
|
Extra (smart media card 4MB/3.3V) |
|
Image Capacity |
|
Standard (quality-about 20/high quality-about 10) |
|
Lens |
|
Dual fixed focus F:2.8f = 6.6 |
|
Focus Length |
|
Normal (50cm ~ ) Macro (5 ~ 50cm) |
|
View Finder |
|
OVF (optical view finder) & color LCD |
|
Shutter Speed |
|
Electric Shutter (1/8 ~ 1/2000) |
|
Exposure |
|
Auto / Manual |
|
White Balance |
|
Auto |
|
Video Out |
|
Both NTSC type & PAL type |
|
Power Source |
|
5.0V:A type battery, 3.6V:Li-ion charger |
|
PC Interface |
|
Serial Transmission (RS 232C : Max 115.2kbps) |
|
Compression |
|
Standard JPEG |
|
Support O/S |
|
MS-Windows 95, 98 |
|
S/W |
|
CD-Rom (TWAIN Driver, iPhotoExpress) |
|
Dimensions |
|
102 x 75 x 40 (Length x Height x Width) |
|
Net Weigh |
|
Less than 199g (not including battery pack) |
|
Basic Shooting |
Standard Shooting |
Full Size Shooting : 1152 x 864 (SQ/HQ) |
|
General Shooting |
VGA Size Shooting : 640 x 480 (SQ/HQ) |
||
Mode |
|||
B/W Shooting |
Full Size B/W : 1152 x 854 (SQ/HQ) |
||
|
|||
|
Multi Shooting |
Full Size Division : 1152x 864 (SQ/HQ) |
|
Special Shooting |
- 4 ~ 16 Images Division |
||
|
|||
Mode |
Continuous |
VGA Size continuation : 640 x 480 (SQ/HQ) |
|
|
Shooting |
- 3 ~ 6 Images Division |
|
|
Normal Playback |
One Image at a time, full size playback |
|
Play Mode |
Magnified Playback |
4 times magnified playback by parts |
|
Multi Playback |
6 images-divided multi playback |
||
|
|||
|
Automatic Playback |
Automatic interval playback |
|
|
Selective Erase |
Erase selected images among divided images |
|
Erase Mode |
Full Erase |
Erase all the memories |
|
|
Erase Prevention |
Prevent accidental erase of precious images |
|
Setting Mode |
|
Menu bar type control for each status |
|
Transmission Mode |
|
PC interfacing only mode |
|
Others |
|
- Direct interfacing mode |
|
|
- Manual adjust mode : adjusting exposure |
||
|
|
- Navigation key control : 4-direction movement and selection |
|
|
|
|
The technical specifications and design may be changed without notice.
Samsung Electronics |
2-1 |
Specifications
MEMO
2-2 |
Samsung Electronics |
3. Disassembly and Reassembly
3-1. Cabinet Disassembly
3-1-1. Ass’y CASE-TOP Removal
Remove the INLAY.
Remove the CASE-TOP.
Remove 2 screws.
Remove 1 screw.
Remove the INLAY.
Fig. 3-1 Ass’y CASE-TOP Removal
Samsung Electronics |
3-1 |
Disassemblr and Reassembly
3-1-2. Ass’y CASE-BOTTOM Removal
Remove the CASE-BOTTOM.
Remove 1 screw.
Remove 3 screws.
Fig. 3-2 Ass’y CASE-BOTTOM Removal
3-2 |
Samsung Electronics |
Disassemblr and Reassembly
3-1-4. Ass’y CASE-FRONT Removal
Remove 2 screws.
Remove the CASE-FRONT.
* Be careful to assemble MACRO-LEVER with LENS-MACRO when assembling the case-front.
Fig. 3-4 Ass’y CASE-FRONT Removal
3-4 |
Samsung Electronics |
Disassemblr and Reassembly
3-1-6. Ass’y MAIN Removal
Remove the ASSY-MAIN.
Remove the
3screws.
Remove the FPC-MAIN from MAIN-PCB.
Fig. 3-6 Ass’y MAIN Removal
3-6 |
Samsung Electronics |
Disassemblr and Reassembly
3-3. Connector Diagrams
¡¨BATT + ¡¨
¡¨BATT - ¡¨
Fig. 3-9 Connector Diagrams
|
NO. |
CONNECTOR |
DIRECTION |
|
CONNECTOR |
NO. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
CN02 |
MAIN BOARD |
|
|
|
DC-BOARD |
CNP03 |
2 |
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
CN02 |
MAIN BOARD |
|
|
|
JACK BOARD |
CNJ02 |
3 |
||
|
|
||||||||||
4 |
|
CN03 |
MAIN BOARD |
|
|
|
ASSY-LENS |
LENS-FPC |
5 |
||
|
|
||||||||||
10 |
|
CN05 |
MAIN BOARD |
|
|
|
REAR BOARD |
CNB01 |
11 |
||
|
|
||||||||||
12 |
|
CN04 |
MAIN BOARD |
|
|
|
FUNT-BOARD |
CNF01 |
13 |
||
|
|
||||||||||
14 |
|
CNL01 |
MAIN BOARD |
|
|
|
TFT-LCD |
LCD-FPC |
15 |
||
|
|
||||||||||
16 |
|
CNF03 |
FUNT-BOARD |
|
|
|
ASSY-STROBO |
STROBO |
|
||
|
|
|
|||||||||
6 |
|
CNP02 |
DC-BOARD |
|
|
|
JACK-BOARD |
CNJ03 |
9 |
||
|
|
||||||||||
6 |
|
CNP02 |
DC-BOARD |
|
|
|
BATTERY +, - |
BATTERY |
7 8 |
||
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
||
6 |
|
CNB02 |
REAR-BOARD |
|
|
|
LCD-B/L |
HBL |
18 |
||
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
3-8 |
Samsung Electronics |
4. Exploded View and Parts List
4-1. |
Cabinet Assembly |
4-2 |
4-2. |
Parts List |
4-3 |
Samsung Electronics |
4-1 |