Samsung SCZ-2250 User Manual

SCZ-3250PD(ND)
SCZ-2250PD(ND)

SCZ-2250P(N)
SCZ-3250P(N)

Power Zoom Camera

User Manual

imagine the possibilities

Thanks you for purchasing this Samsung product.
To receive a more complete service, please visit
our website
www.samsungsecurity.com

overview

CAUTION

RISK OF ELECTRIC SHOCK.DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

•

RAIN OR MOISTURE.
TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL

•

IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
IF THIS POWER SUPPLY IS USED AT 240V AC, A SUITABLE PLUG ADAPTER SHOULD BE USED.

•

WARNING

BE SURE TO USE ONLY THE STANDARD ADAPTER THAT IS SPECIFIED IN THE SPECIFICATIO

1.
USING ANY OTHER ADAPTER COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE TO THE PRODUCT.

INCORRECTLY CONNECTING THE POWER SUPPLY OR REPLACING BATTERY MAY CAUSE EXPLOSION,

2.
FIRE, ELECTRIC SHOCK, OR DAMAGE TO THE PRODUCT.

DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY

3.
CAUSE ABNORMAL HEAT GENERATION OR FIRE.

SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY

4.
CAUSE FIRE.

WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY. THE FALL OF CAMERA MAY

5.
CAUSE PERSONAL INJURY.

DO NOT PLACE CONDUCTIVE OBJECTS (E.G. SCREWDRIVERS, COINS, METAL PARTS, ETC.) OR

6.
CONTAINERS FILLED WITH WATER ON TOP OF THE CAMERA. DOING SO MAY CAUSE PERSONAL
INJURY DUE TO FIRE, ELECTRIC SHOCK, OR FALLING OBJECTS.

DO NOT INSTA

7.
FIRE OR ELECTRIC SHOCK.

IF ANY UNUSUAL SMELLS OR SMOKE COME FROM THE UNIT, STOP USING THE PRODUCT. IN

8.
SUCH CASE, IMMEDIATELY DISCONNECT THE POWER SOURCE AND CONTACT THE SERVICE
CENTER. CONTINUED USE IN SUCH A CONDITION MAY CAUSE FIRE OR ELECTRIC SHOCK.

LL THE UNIT IN HUMID, DUSTY, OR SOOTY LOCATIONS. DOING SO MAY CAUSE

N SHEET.

2_ overview

IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE

9.
CENTER. NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG
IS NOT LIABLE FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR
ATTEMPTED REPAIR.)

WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT. DOING

10.

SO MAY CAUSE FIRE OR ELECTRIC SHOCK.

CAUTION

DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY

1.
FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE.

2.

DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 140°F), LOW
TEMPERATURE (BELOW -14°F), OR HIGH HUMIDITY. DOING SO MAY CAUSE FIRE OR
ELECTRIC SHOCK.
IF YOU WANT TO RELOCATE THE ALREADY INSTALLED PRODUCT, BE SURE TO TURN OFF

3.
THE POWER AND THEN MOVE OR REINSTALL IT.
REMOVE THE POWER PLUG FROM THE OUTLET WHEN THERE IS A LIGHTING STORM.

4.
NEGLECTING TO DO SO MAY CAUSE FIRE OR DAMAGE TO THE PRODUCT.
KEEP OUT OF DIRECT SUNLIGHT AND HEAT RADIATION SOURCES. IT MAY CAUSE FIRE.

5.
INSTALL IT IN A PLACE WITH GOOD VENTILATION.

6.
AVOID AIMING THE CAMERA DIRECTLY TOWARDS EXTREMELY BRIGHT OBJECTS SUCH AS

7.
SUN, AS THIS MAY DAMAGE THE CCD IMAGE SENSOR.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS

8.
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

9.

THE MAINS PLUG IS USED AS A DISCONNECT DEVICE AND SHALL STAY READILY OPERABLE AT ANY TIME.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS :

1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.

Caution

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE
PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMER­CIAL ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT
INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL IN­TERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT
THE INTERFERENCE AT HIS OWN EXPENSE.

IC COMPLIANCE NOTICE

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE.-CAUSING EQUIPMENT REGULATIONS OF ICES-003.

English _3

overview

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS :

1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

2)

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.

Caution

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE
PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMER­CIAL ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT
INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL IN­TERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT
THE INTERFERENCE AT HIS OWN EXPENSE.

IC COMPLIANCE NOTICE

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE.-CAUSING EQUIPMENT REGULATIONS OF ICES-003.

4_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

1.

Keep these instructions.

2.

Heed all warnings.

3.

Follow all instructions.

4.

Do not use this apparatus near water.

5.

Clean only with dry cloth.

6.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7.

Do not install near any heat sources such as radiators, heat registers, or other apparatus (including

8.

amplifi ers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

9.

blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fi t into
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience

10.

receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specifi ed by the manufacturer.

11.

Use only with cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or

12.

sold with the apparatus.

Unplug this apparatus when a card is used. Use caution when moving the cart/

13.

apparatus combination to avoid injury from tip-over.

14.

Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been

damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects
fi lled with liquids, such as vases, shall be placed on the apparatus

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of
with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are
not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.

(Waste Electrical & Electronic Equipment)

English _5

overview

CONTENTS

OVERVIEW

2

INSTALLATION &

CONNECTION

12

SETUP

15

APPENDIX

4

34

5 Important Safety Instructions
6 Contents
7 Features
8 What’s Included
8 At a Glance

12 Preparing Installation
12 Connecting the Cables

15 Main Menu
16 Profi le
18 Camera Set
27 Intelligent Video
29 Privacy Zone
30 Preset
31 Other Set
32 Communication
33 System Info

34 Shortcut Keys
35 Specifi cations

6_ overview

FEATURES



With the state-of-the-art digital signal processing technology, full digital image
proces sing and special algorithm of 600 -line high resolution implemented.



High Sensitivity: It implements images of high sensitivity using the up-to-date
Super-HAD IT CCD( / )/ExView-HAD PS CCD(
).

SCZ-3250P(N)

/



VPS(Vir tual Progressive Scan): This is an advanced technology that reproduces

SCZ-2250PD(ND)

SCZ-2250P(N)

a sharp progressive image. This is appropriate to high quality recording and fi le
transfer via the Internet. ( /



High performance sur veillance camera, equipped with x25 zoom lens and digital

SCZ-3250PD(ND)

SCZ-3250P(N)

only

)

zoom IC, enabling monitoring up to 400 times



WDR extends the contrast range as it takes a picture of each of dark and bright areas
before compositing the two, which is useful if you take a picture of windows inside
a building. Namely, it improves the picture quality of the outdoor scenery as well as

SCZ-3250PD(ND)



Low Illumination : It uses the digital signal technologies such as low illumination and

SCZ-3250P(N)

/

)indoor.(

Day/Night functions that make your camera identify objects even in the worst envi­ronment.



XDR (eXtended Dynamic Range): Actively controls the gamma compensation in the
way it operates the ambient luminance contrast in a certain pixel unit to determine
the optimal visibility.



Digital Power Synchronization: The full digital Line Lock function directly adjusts the
vertical camera synchronization to enhance the operationability and reliability of this
camera.(



SCZ-2250PD(ND)

DAY/NIGHT:

only )

SCZ-3250PD(ND)

/

This function can make the IR Cut fi ltering function inactive under the illumina-

tion below the normal value.



White Balance to control the brightness to the illumination



Supe rior Back light Adju stment:When an object has a bright illumination or sunlight
behind it, this camera automatically improves the shaded object picture quality.



Auto Focus to automatically adjust the focus to the subje ct movement



Privacy zone to hide a specifi c area for personal privacy.

SCZ-3250PD(ND)

English _7

overview

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Camera

AT A GLANCE

SIDE VIEW

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you



M

have applied ethanol.

8_ overview

Camera Holder

(Mount Adaptor)

2 Screws

User's Manual

Mount Adapter
Fixing Grooves

Camera Lens

Rear Panel

SCZ-2250P(N)

















SCZ-2250PD(ND)

















SCZ-3250P(N)

SCZ-3250PD(ND)

 Input/Output Connector

This connector has input and output ports for RS-485 control signals,
DAY/NIGHT switching, and alarm output signals.









SCZ-3250PD(ND)

SCZ-3250P(N)

/

SCZ-2250PD(ND)

/

SCZ-2250P(N)

English _9

overview

1. ALARM OUT
Alarm out jack for motion detection. (Open Collector, On Gnd)

2. GND
Grounding jack.

3. TRIGGER IN ( /

SCZ-3250PD(ND)

SCZ-3250P(N)

Displays the current still image when it receives the Trigger signal. (Normal
Open Type)

4.5.6 FOCUS, COM, ZOOM

This port is used for ZOOM/FOCUS, MENU CONTROL, HOME
RETURN, and ONEAF by using an external controller.
Depending on the input condition, 4 modes, A, B, C, and D are
available. (SPECIAL - CTRL TYPE)
(Operation Voltage Range : +3V~+13V, -3V~-13V)

1) When the voltage is supplied to either ZOOM or FOCUS port

Function
*1

Code

*1: During MENU OFF, controls ZOOM/FOCUS and during MENU ON,

changes the direction, Up/Down/Left/Right SETUP switch.

2) When the voltage is supplied to both ports

Function

Code

Tele(Up)

A -6V +6V -6V +6V

B -6V +6V +6V -6V
C +6V -6V -6V +6V
D

ZOOM Port

A -6V -6V +6V +6V
B -6V +6V +6V -6V
C +6V -6V -6V +6V
D

Wide(Down)

ZOOM Port FOCUS Port

+6V -6V +6V -6V

ENTER/AF *2 HOME RETURN *3

FOCUS Port

+6V +6V -6V -6V

)

Near(Left) Far(Right)

ZOOM Port

FOCUS Port

10_ overview

* 2 : For short voltage supply during MENU OFF, executes ONEAF and for

more than 2 second

* 3 : For more than 2 second long voltage supply, moves to the PRESET

0(HOME) position.

7. 5V OUT
Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.

8. DAY/NIGHT IN
This is a function to receive the external DAY/NIGHT signal from the
sensor(option) and convert the signal into BW.

9. RS-485 DATA­Jack for connection to RS-485 DATA- signal line.

10. RS-485 DATA+
Jack for connection to RS-485 DATA+ signal line.

 SETUP Switch

This switch is used to set the function or property. When this switch is pressed
for at least 2 seconds, the MAIN MENU appears.

ef (Left/Right)

cd

(Up/Down) :

 : When you press this switch in the menu, the selected function is confi rmed.

To enter a submenu, press this button.

: By pressing this switch left or right, you can move left or right

on the menu or change the displayed value.

By pressing this switch up or down, you can move up or down on
the menu.

 Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the
Video signals.

 GND

This is a grounding port.

 Power Connection Port

This is connected to the Power cable.

 Power Display LED

When the power is normally connected, the red LED lights.

English _11

installation & connection

PREPARING INSTALLATION



To install and use the camera, fi rst prepare the following cables.

Power Adapter Cable (sold separately)



The requirements for the power adapter, which connects to the camera’s

POWER IN terminal, are as follows:

SCZ-3250PD(ND)

- : DC 12V 600mA

- :

SCZ-2250P(N)

Video Cable(sold separately)



Use a BNC cable, such as the one shown below, to connect the camera’s VIDEO
OUT to the monitor.

SCZ-2250PD(ND)

/

SCZ-3250P(N)

/

AC 24V 300mA
DC 12V 600mA

CONNECTING THE CABLES

1. Connect one end of the BNC cable(not included) to the VIDEO OUT.

2. Connect the other end of the BNC cable (not included) to the VIDEO IN of the
monitor.

12_ installation & connection