in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the limit established by the FCC.
Tests are performed in positions and locations (e.g. at
the ear and worn on the body) as required
by the FCC.
The tests are performed in positions and
locations(e.g., at the ear and worn on the body) as
required by the FCC for each model.
The highest SAR values for this model phone as
reported to the FCC are:
CDMA Mode(Part 22) Head: 1.06 W/Kg.
Body-worn: 0.907 W/Kg.
PCS Mode(Part 24) Head:1.34 W/Kg.
Body-worn:0.94 W/Kg.
For body worn operations, this model phone has been
tested and meets the FCC RF exposure guidelines
when used with a Samsung accessory designated for
this product or when used with an accessory that
contains no metal and that positions the handset a
minimum 1.5 cm from the body.
Non-compliance with the above restrictions may
in violation of FCC RF exposure guidelines.
SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section
of http://www.fcc.gov/oet/fccid after searching on
FCC ID A3LSCHU490.
*In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg) averĀaged over one gram of tissue. The standard incorporates a subĀstantial ma gin of safety togive additional protection for the
public and to account for any variations in measurements.
*
Health and safety information
result
27