All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein Street
Richardson, TX 75082Plano, TX 75074
2007 Samsung Telecommunications America, L.L.C. Samsung is a registered
trademark of Samsung Electronics Co., Ltd. and its related entities.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5,
107, 225; 5, 109, 390.
GH68-13024A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark of RSA Security, Inc.
The Alltel SnapTM is a Trademark of Alltel Communications, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Samsung Mobile Products and Recycling ..............................................................155
Care and Maintenance ..........................................................................................155
Warranty Information ..............................................................................157
Standard Limited Warranty ...................................................................................158
Index .........................................................................................................162
6
Section 1: Getting Started
Topics Covered
• Understanding this User Manual
• Activating Your Phone
• Charging the Battery
• Setting Up Your Voice Mail
This section explains how to start using your phone by activating your service, setting
up your voice mail, or getting an understanding of how this manual is put together.
Getting Started7
Understanding this User Manual
The chapters of this guide generally follow the same order as the menus and submenus in your phone. A robust index for quick reference to most features begins on
page 162.
Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the guide, beginning on page
139.
Notes and tips
Throughout this guide are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or sub menu.
• Tips: Provide quick or innovative methods for performing functions related to the
subject at hand.
• Important: Points out important information about the current feature that could
affect performance, or even damage your phone.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel
adapter.
Important!: You must fully charge the battery the first time you use your phone, otherwise you could
damage the battery.
1. Insert the top end of the battery first,
matching the gold contacts on the top end of
the battery to those inside of the phone.
2. Press the bottom end of the battery down into
the phone.
8
Activating Your Phone
3. Place the battery cover over the battery and slide
the cover upward into place.
Turn Your Phone On
1. Open the folder on your phone, as shown.
2. Press the key.
END
3. The phone begins searching for a network signal.
4. Once the phone finds a signal, the time, date and
day appear in the bottom of the display.
5. You’re now ready to place and receive calls.
Press
Tip: Your phone has an internal antenna. Do not touch the phone
case over the antenna while using your phone as this can
affect call quality and can cause the phone to operate at a
higher power level than is necessary.
Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon () appears at
the top of the phone’s display. If you cannot place or receive calls, try later when service is available,
or at another location.
Antenna
Turn Your Phone Off
䡲 Press and hold the key for two or more seconds. Your phone powers
off.
Note: If your phone is on and you press for less than one second, the phone will not power off. This
prevents your phone from being turned off accidentally.
END
END
Getting Started9
Remove the Battery
Important!: You must unplug the Travel Adapter (if it is connected) before removing the battery from the
phone during charging to avoid damage.
1. Press and hold the key to turn off the phone (if on).
END
2. Press the battery cover at point (1) and
slide the cover (2) toward the bottom end
of the phone.
3. Lift the battery cover up and away from
the phone, bottom end first.
4. Lift the battery (3) up and away from the
3
phone, bottom end first.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your
warranty and may cause damage.
Use the Travel Adapter
The travel adapter included with your phone is a
convenient, light-weight charger that rapidly
charges your phone from any 120/220 VAC
outlet.
1. Plug the large end of the Travel
Adapter into a standard 120 VAC or 220 VAC wall outlet.
Note: For connection to an electrical supply not located in North America, you must use an adaptor of the
proper configuration for the power outlet. Use of the wrong adapter could damage your phone and
void your warranty.
10
Setting Up Your Voice Mail
2. Insert the smaller end of the Travel Adapter
into the charger/accessory connector at the
bottom end of your phone.
Note: With the phone turned OFF, a discharged battery recharges fully in approximately 4 hours.
Low battery indicator
The battery indicator () in the upper-right corner of the display indicates power
level. Monitor the battery strength and ensure your battery is adequately charged.
• Three bars () indicate a full charge.
• An empty battery icon () indicates a near empty battery.
• A blinking empty battery icon () and a tone sounding indicate you have two to
three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone shuts
down.
Setting Up Y our Voice Mail
Voice mail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your voice mail account has been set up, you can use the Voice Mail folder (under the Message
menu) to view details of voice messages in your voice mail box.
1. In idle mode, press and hold the key or dial your own mobile
@
number to dial voice mail.
2. Follow the prompts in the new user tutorial to setup your mail box.
Listen to voice mail
1. In idle mode, press and hold the key or dial your own mobile
@
number to dial voice mail.
2. After connecting, you are prompted to enter your password.
Getting Started11
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Closed View of Your Phone
• Open View of Your Phone
• Command Keys
• Understanding the Display Screen
• Your Phone’s Modes
This section outlines some key features of your phone. This section also explains the
screen and the icons that are displayed when the phone is in use.
Features of Your Phone
• High speed data (CDMA 2000 1X Technology)
• Global Positioning Technology (GPS)
• Personal Information Management (PIM) functions (Scheduler, To Do List, and so
on)
• Text Messaging
• Picture Messaging (including Handwritten and Postcard messaging)
• E-mail Messaging
• VGA (300K Pixel) Camera
• Advance Speech Recognition
• Speakerphone
• Phone Memory Storage
12
Closed View of Your Phone
Closed View of Your Phone
1. Headset Connector
2. Volume Key
3. External LCD
4. Speaker
1. Headset Connector
2. Volume Key
7. Camera Lens
6. Camera Key
5. Speakerphone Key
6. Camera Key
5. Speakerphone Key
Command Keys and Features
1. Headset Connector — Used for handsfree, Teletypewriter (TTY), and
Telecommunication Device for the Deaf (TDD) equipment.
2. Volume Key — Lets you adjust the ringer volume in standby mode (with
the folder open) or adjust the voice volume during a call. To mute the ringer
during an incoming call, press the volume key up or down.
3. External LCD — Indicates when you have an incoming call or a message.
4. Speaker — The speaker, on the front of the folder, plays sounds such as
ring tones and alerts.
Understanding Your Phone13
5.
Speakerphone Key — Lets you enable and disable speakerphone mode.
6. Camera Key — With the phone open and in standby mode, launches the
camera.
In camera mode, takes a picture.
7. Camera Lens — The lens of your built-in camera.
Open View of Your Phone
15. Earpiece
14. Internal Display
13. Navigation Key
1. Left Soft Key
2. SEND Key
3. Clear Key
4. Voice Mail Hot Key
12. Right Soft Key
11. OK Key
10. END/Power/Menu Exit Key
9. Alpha-numeric Keys
5. Special Function Keys
6. Power/Accessory
Connector
8. Microphone
7. Voice Recognition Key
Command Keys and Features
1. Left Soft Key — Performs the functions indicated by the screen text on the
bottom of the internal display.
2. SEND Key — This key is used to initiate your calls.
14
Command Keys
3. CLR (clear) Key — Deletes characters from the display when you are in
text entry mode. When in a menu, press to return to the previous menu.
4. Voice Mail Hot Key — Press and hold to automatically di al your voicem ail.
5. Special Function Keys — Enter special characters. Perform various
functions.
6. Power/Accessory Connector — Used to plug in the Travel Charger and to
connect any available accessory cable.
7. Voice Recognition Key — Lets you access your phone’ s voice re cognitio n
features.
8. Microphone — The microphone used during phone calls and voice memo
recordings.
9. Alpha-numeric Keys — Use these keys to enter numbers, letters, and
characters.
10. END/Power/MENU Exit Key — Ends a call. Press and hold this key for a
few seconds to turn your phone On or Off. When you receive an incoming
call, press to mute the ringer and send the call to Voice Mail.
11. OK Key — Pressing when navigating through a menu accepts the
highlighted choice in the menu.
12. Right Soft Key — Performs the functions indicated by the screen text on
the bottom of the display.
13. Navigation Key — In menu mode, lets you browse and highlight menu
options.
14. Internal Display — Displays the numbers, messages, and icons you need
to operate your phone.
15. Earpiece — Plays sounds such as caller voices and call progress tones.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key and the right soft key .
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press the MENU (left) soft key () to open the main menu.
• When the left soft key function is Option, press the Option (left) soft key () and
a pop-up menu appears.
Understanding Your Phone15
•
When the left soft key function is Edit, press the Edit (left) soft key () to edit a
Contact.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the MESSAGE (right) soft key () to open the Messages
menu.
• When the right soft key function is Back, press the Back (right) soft key () to
back up one menu level.
OK Key
• In a menu, press the OK key () to accept the highlighted selection.
• When the OK key function is Edit, press the Edit (OK) key () to edit a Draft
OK
OK
message.
Clear Key
The CLR key () is used to erase or clear numbers, text, or symbols from the
display. You can also use the key to return to a previous menu or to return to
BACK
BACK
standby mode from any menu.
1. If you enter an incorrect character, briefly press to backspace (and
BACK
delete) the character.
2. To erase the entire sentence, press and hold .
3. To back up one menu level, briefly press .
4. To return to standby mode, press and hold until you return to
BACK
BACK
BACK
standby mode.
End Key
1. Press and hold the End key to turn your phone on or off.
2. Briefly press once to disconnect a call.
3. Press to return to standby mode from any menu, or to cancel the last
END
END
END
input.
Send Key
S
The Send key is used to answer calls, dial calls, and to recall the last
E
N
D
number(s) dialed, received, or missed.
S
1. Press once to answer calls.
2. Enter a number and briefly press to make a call.
E
N
D
S
E
N
D
16
Understanding the Display Screen
3. Briefly press in standby mode to display a list of recent calls to and
SEND
from your phone.
4. Press twice in standby mode to call the most recent number.
5. Press to pick up a waiting call. Press again to switch back to
SEND
SEND
SEND
the other call.
Navigation Key
Use the directional keys on the navigation key to browse menus, sub menus,
OK
and lists. Each key also acts as a shortcut to launch applications.
Speakerphone Key
Use the speakerphone key () — located on the right side of your phone — to
switch from using the earpiece to the speakerphone before or during a call. Use the
volume keys () — located on the left side of your phone — to adjust the
volume. Press and hold the speakerphone key to enable and disable the
speakerphone option.
Understanding the Display Screen
The top line of your phone’s display contains icons
that indicate network status, battery power, signal
strength, connection type, and more. The following
list contains icons that may appear in your display.
Display screen icons
Signal strength — Always appears when your phone is on and
indicates the current signal strength. More lines indicate higher
signal strength.
Service indicator — Indicates a call in progress. When dialing
a number, this icon flashes until the call connects.
No service indicator — Indicates your phone cannot find a
signal because you’re outside a service area. You cannot make
or receive calls. Wait f o r a signal or move into an open area t o
try and find a signal. The no service indicator always appears
when you turn on your phone and disappears once service is
located.
Understanding Your Phone17
Analog mode indicator — Indicates your phone is operating
in an analog service area or that digital service has been
interrupted. Also indicates that some network features are not
available. Also, you may need to recharge your phone’s battery
more often while in an analog service area.
Roam — Extended roaming indicator. Roaming occurs when
you use your phone outside your home area. While roaming, a
wireless provider other than yours handles your call, so the
service rate for the call may be higher than for calls made
within your home area. Please refer to information from your
Wireless Provider on roaming rates.
New Message — Indicates that you’ve received a new text,
page, or web alert message. You’re also notified by a visual and
audible alert.
Voicemail — Indicates that you’ve received a new voicemail.
1X Protocol — Indicates your phone is using the 1X protocol.
Battery strength — Indicates the battery charge level. The
more black bars, the greater the charge. When the battery
becomes very low, a flashing empty battery icon displays and
the phone sounds an audible alert, which indicates your phone
is about to shut down.
Alarm clock — The alarm clock is set.
GPS (911 only) — This icon represents Global Positioning
Service (GPS) for 911.
GPS — Indicates GPS is on for location.
Vibrate plus Ring — Your phone is in vibrate plus ring mode.
When you receive a call, the phone vibrates and rings.
18
Understanding the Display Screen
Ring — Your phone is in ring mode. When you receive a call,
the phone rings.
1 Beep — Y our phone is in 1 Beep mode . When you recei ve a
call, the phone rings a single beep.
Vibrate mode — Your phone is in vibrate mode. When you
receive a call, the phone vibrates instead of ringing.
Ringer off — The ringer is in Ringer off mode. When you
receive a call, it is only indicated in the displays.
Silent mode — Indicates your phone is in silent mode. Ringer
is silenced for all alerts, incoming calls, and incom ing
messages. The phone alerts you of incoming calls, alerts, and
messages by vibration and a message in the displays.
TTY mode — Indicates your phone is in TTY mode (For more
information see “TTY Mode” on page 131).
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low memory. Dialogue boxes and their definitions are outlined below.
• Choice
• Example: “Save to draft?”
• Reconfirm
• Example: “Erase all inbox msgs?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “Message Saved”
• Information
• Example: “New Message”
• Error
• Example: “System Error!”
Understanding Your Phone19
•
wxyz
def
Warning
• Example: “Battery Low,” “Memory Full!”
Backlights
Backlights illuminate the internal and external displays and the keypad. When you
press any key or open the phone, the backl ights come on. They go off when no keys
are pressed within a period of time set in the Backlight menu.
Note: During a phone call, the display backlights dim and turn off after one minute to conserve battery
power, regardless of the Backlight setting.
See “Backlight” on page 122 for more information.
External Display
Your phone has an external display on the outside of the folder. When you close the
phone, the external display shows a digital clock.
Icons that appear in the external display indicate the following:
• Signal strength
• Service protocol 1x
• Digital roaming service
• Incoming calls and messages
• Alarms and alerts
• Ringer/sound mode
• Battery charge level
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the MENU (left) soft key (), then press
(for Settings), (for Call Options), and for Call Answer. The
def
@
following call answer options appear in the display:
S
•Send Key — Only pressing answers a call.
• Folder Open — Opening the phone’s folder or pressing answers a call.
•Any Key — Pressing any key except the key or key answers a
call.
E
N
D
END
S
E
N
D
2. Use the navigation keys to highlight an option.
3. Press the key to select the method for answering calls.
OK
wxyz
20
Your Phone’s Modes
Input mode
Input mode determines how you enter text, numbers and symbols. While at any text
entry screen, press the Option (left) soft key (), then choose the input mode
from the pop-up menu using the navigation keys. Optional input modes are T9 Word, Alpha, Symbol, Number, and Quick Text. (See “Entering Text” on page 46
for more information.)
Tip: You can also cycle between T9 Word, Alpha, and Number by repeatedly pressing and holding .
Lock Mode
When the phone is in Lock Mode, restrictions are placed on phone use. You can
receive calls and messages, but cannot place outgoing calls (except for emergency
numbers) until you unlock the phone.
Lock Mode also restricts access to menus and the volume key . Unlock your phone by
entering the lock code when prompted. (See “Lock Phone” on page 133 for more
information.)
Standby Mode
Standby mode is the state of the phone once it has found service and is idle. The
phone goes into standby mode:
• After you power the phone on.
• When you press after a call or from within a menu.
END
In standby mode, you will see the time, day, and date as well as all phone status
icons.
S
1. While in standby mode, enter a phone number, and press to place a
E
N
D
call.
2. Press to return to standby mode.
END
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds and a notification
message appears in the display when a new message arrives.
• Press the View (right) soft key () to view now.
• Press the Ignore (left) soft key () to view later.
Understanding Your Phone21
Talk Mode
wxyz
You can place and receive calls only when your phone is on. While in a call your
phone is in talk mode. Press the MENU (left) soft key () to display a list of menu
options. See “In Use Menu Outline” on page 39 for more information.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
• In standby mode, press and hold . Entering Silent Mode briefly appears in
the display and your phone does not play ring tones for incoming calls or sound
alert tones.
• While in Silent mode and standby mode, press and hold . Exit Silent Mode
briefly appears in the display and your phone returns to standby mode.
Vibrate Mode
䊳 In standby mode, repeatedly press the volume key () down until
Vibrate appears in the display. Your phone will now vibrate when you
receive a call, but will play tones for alerts.
The volume key is on the left side of phone, near the Send key ().
S
E
N
D
Adjust the Ringer
1. In standby mode, press the volume key () on the left side of the
phone up or down. Options are:
• Ringer off • Level 3
• Vibrate • Level 4
• 1 Beep • Level 5
• Level 1 • Vib+Ring
• Level 2
2. When you are satisfied with the setting, press the key. Your phone
OK
returns to standby mode.
Tip: Y ou can also enter the Calls option by pressing the MENU (left) soft key (), then pressing the ,
abc
, , and keys. Use the Volume key on the left side of your phone to adjust the ringer
@@
setting.
wxyz
Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode. The Vibrate plus
Ring icon () appears in the display when the phone is in or Vib+Ring mode.
22
Section 3: Call Functions
Topics Covered
• Making a Call — Number Entry Dialing
• Making a Call — Speed Dialing
• Making a Call — Voice Dialing
• Answering a Call
• Rejecting a Call
• Adjusting the Call Volume
• Calls Log
• Phone Modes
• Roaming
This section explains how to make or answer a call. This section also includes the
features and functionality associated with making or answering a call.
Call Functions23
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using the keypad.
S
2. Press the key to place the call.
E
N
D
Dialing Emergency Numbers
You can dial any of the numbers 911, *911, or #911 to place an emergency call.
S
If you dial 911, *911, or #911 and press the key, your phone dials the
E
N
D
emergency number 911, automatically.
Important!: Emergency number 911 is hard-coded into your phone. You can dial this number almost any
time, even when the phone is locked or restricted.
If you call 911 an audible tone is heard and an Emergency prompt appears in the display for
the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Dialing International Numbers
Call another country from the U.S.
1. In standby mode, enter the three-digit exit code (011) for the United States.
2. Enter the country code for the country that you are calling.
S
3. Enter the number that you wish to call, then press the key.
Note: Puerto Rico and Canada are on the North American dialing plan. When making calls to Puerto Rico
and Canada it is similar to making calls within the United States, no unique country codes are
necessary.
E
N
D
Placing calls when outside the U.S. — Mexico
• Calling locally within Mexico: Dial the seven or eight-digit number.
• Calling long distance within Mexico: Dial 01, plus the ten-digit number (includes
area code).
• Calling to the U.S. or Canada from Mexico: Dial 001, plus the ten-digit number
(includes area code).
24
Making a Call — Speed Dialing
def
• Calling Voicemail from Mexico: Dial 001, plus your ten-digit wireless number.
Once you hear the recorded prompt, press and enter your passcode.
Manual Pause Calling
When you call automated systems (like banking services), you are often required to
enter a password or account number. Instead of manually entering the numbers
each time, you can store the n umbers in your Co ntact s al ong wi th sp ecial c hara cters
called pauses.
S
• P pause — A hard pause stops the calling sequence until you press the key.
E
N
D
• T pause — A two-second pause stops the calling sequence for two seconds and
then automatically sends the remaining digits.
To manually call a number with pause(s) without storing it to your Contacts:
1. Enter the number you wish to call.
2. Press the Option (left) soft key (). A pop-up menu containing the
following options appears in the display:
•P pause — a hard pause (awaits input from you).
•T pause — a two-second pause.
3. Use the navigation keys to highlight the desired pause option.
4. Press to enter the highlighted pause into your number sequence.
5. Press to call the number.
OK
S
E
N
D
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s Contacts list.
Speed Dialing lets you quickly and easily dial any contact in your Contacts list by
using that contact’s location number in the list. You can assign and change location
(speed dial) numbers for your contacts. (See “Assigning Speed Dial Numbers” on
page 60 for more information.)
One-Touch Dialing
Memory locations 002 through 009 are special One-Touch dialing locations. You can
call the phone numbers stored in your phone’s Contacts list from 002 through 009 by
pressing and holding a single key.
Example: For location number 003, press and hold the key until the name and number appear in the
display and the number is dialed.
def
Call Functions25
Two-Touch Dialing
def
def
Memory locations 010 through 099 are special Two-Touch dialing locations.
Example: For location number 013, briefly press the key, then press and hold the key until the
name and number appear in the display and the number is dialed.
@
def
Three-Touch Dialing
Memory locations 100 through 495 are special Three-Touch dialing locations.
Example: For location number 113, briefly press the key, briefly press the key again, then press
and hold the key until the name and number appear in the display and the number is
dialed.
def
@@
Pause Dialing From a Conta cts En try
• If you speed dial a contact that contains (two-second) T pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) P pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Making a Call — Voice Dialing
The Alltel Snap mobile phone includes state-of-the-art voice recognition software
that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your Contacts list by
saying the name of the contact (Name Dialing). You can also use Voice Dial to dial
any valid telephone number, even numbers not stored in your contact list, by
speaking the individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
earpiece.
26
Making a Call — Voice Dialing
2. Say, “Voice Dial”.
You are prompted to “Say the name or number”.
3. Speak clearly and say the name of a person in your Contacts list, first name
followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with “Did you say?” followed by the first
name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See see "Choice Lists
Settings" on page 108, for more information.)
• Press the Repeat (right) soft key () to say the name again.
• Press the Settings (left) soft key () and press the Cancel right soft key
() to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it (that is, Mobile,
Office, Home, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5. Say one of the following number types:
•Home
•Work
• Mobile
• My Circle
•Fax
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Voice Dial”.
VoiceSignal prompts you to “Say the name or number.”
Call Functions27
3.
Speak clearly and say the tel ephone numb er of the per son you want t o call.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials the number. If
Voice Dial is not sure it has recognized the number , it displays a choice list
of up to three numbers and prompts you with “Did you say?” followed by
the first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next one, or use the
keypad to select the correct number from the list. (See see "Choice Lists
Settings" on page 108, for more information.)
• Press the Repeat (right) soft key () to say the name again.
• Press the Settings (left) soft key () and press the Cancel right soft key
() to exit V oice Dial without dialing.
Pause Dialing From a Conta cts En try
• If you voice dial a contact that contains (two-second) T pause(s) simply wait for the
pauses to pass and the dialing to complete.
• If you voice dial a contact that contains (hard) P pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides: nine ring
volume settings including 1- beep, Vibrate, Ringer Off, or Vibrate+Ring, and/or
different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in the displa y (If
the caller’s number and name are stored in your Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from restricted
number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following events
occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voicemail.
28
Rejecting a Call
def
ghi
mno
Answering an Incoming Call
S
䊳 Press the key. The ring tone and/or vibration stop and the caller’s
voice can be heard in the earpiece.
Tip: You can set your phone to answer calls when you open the folder, when you press any key but the
key, or automatically. (See see "Call Options" on page 129 for more information.
END
E
N
D
Rejecting a Call
When you reject an incoming call, the call is immediately forwarded to your voice
mail.
䊳 During an incoming call, press the Reject (right) soft key (). The
caller is immediately forwarded to your voice mail.
Tip: You can mute the ringer to ignore an incoming call by closing the folder or by pressing the volume key.
Adjusting the Call Volume
In standby mode, repeatedly press the Volume key () down until the desired
Call Volume Level appears in the displa y. The Volume key is on th e left si de of p hone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and Missed calls. You
can also view times for your last call and the time totals for all calls.
Review the Calls Log
1. In standby mode, press the MENU (left) soft key (). The Main Menu
appears in the display.
2. Press the key (for Calls).
jkl
3. Press the number key associated with the Calls log that you wish to review
or the function you wish to access:
@
• Press for Outgoing calls.
• Press for Incoming calls.
• Press for Missed calls.
• Press for Erase Logs.
• Press for Call Timer .
• Press for Data Counter.
Note: In cases where there is a Contacts match for a Calls log entry, the name associated with the number
appears in the display instead of the number.
abc
def
ghi
jkl
mno
Call Functions29
Outgoing Calls
Your phone retains information about the last 20 outgoing calls and stores them in
the Outgoing calls log. You can review the Outgoing calls log for the time and date of
a call, as well as other information.
Note: To quickly view your most recent calls, briefly press in standby mode. Up to 20 of your most
recent outgoing, incoming, and missed calls appear in the display.
SEND
1. In standby mode, press the MENU (left) soft key () then press
(for Calls) and for Outgoing. A list of your outgoing calls appears in
@
the display.
2. Use the navigation keys to highlight a call, then press to view further
OK
information about the call.
3. Press the Option (left) soft key (). A pop-up menu containing the
following options appears in the display:
•Talk — Call the selected number.
•Save — Save the number to your Contacts.
• Prepend — Add a prefix to the number.
•Erase — Erase the selected call from your Outgoing call log. (If this is a recent
call, it will no longer appear in the Recent Calls list.)
4. Use the navigation keys to highlight an option.
5. Press the key to perform the highlighted option’s function.
OK
Incoming Calls
Your phone retains information about the last 20 Incoming calls and stores them in
the Incoming call log. You can review the Incoming call log for the time and date of
the call, as well as other information.
1. In standby mode, press the MENU (left) soft key () then press
(for Calls) and for Incoming. A list of your Incoming calls appears in
abc
the display.
2. Use the navigation keys to highlight a call, then press the key to view
OK
further information about the call.
3. Press the Option (left) soft key (). A pop-up menu containing the
following options appears in the display:
•Talk — Call the selected number.
•Save — Save the number to your Contacts.
• Prepend — Add a prefix to the number.
30
jkl
jkl
Loading...
+ 136 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.