Thank you for purchasing this Samsung mobile device.
This device will provide you with high quality mobile
communication and entertainment based on Samsung’s
exceptional technology and high standards.
This user manual has been specially designed to guide you
through the functions and features of your device.
Read me rst
Please read all safety precautions and this manual •
carefully before using your device to ensure safe and
proper use.
The descriptions in this manual are based on the default
•
settings of your device.
Images and screenshots used in this user manual may
•
dier in appearance from the actual product.
Using this manual
2
Content in this user manual may dier from the product,
•
or from software provided by service providers or
carriers, and is subject to change without prior notice.
Refer to www.samsungmobile.com for the latest version
of the user manual.
Available features and additional services may vary by
•
device, software, or service provider.
Formatting and delivery of this user manual is based
•
on Google Android operating systems and may vary
depending on the user’s operating system.
Applications and their functions may vary by country,
•
region, or hardware specications. Samsung is not
liable for performance issues caused by third-party
applications.
Samsung is not liable for performance issues or
•
incompatibilities caused by user editing of registry
settings.
You may upgrade your mobile device’s software by
•
accessing www.samsungmobile.com.
Page 3
Sound sources, wallpapers, and images provided in this •
device are licenced for limited use between Samsung
and their respective owners. Extracting and using
these materials for commercial or other purposes is an
infringement of copyright laws. Samsung is not liable for
such copyright infringement by the user.
Please keep this manual for future reference.
•
Instructional icons
Before you start, familiarise yourself with the icons you will
see in this manual:
Warning—situations that could cause injury to
yourself or others
Caution—situations that could cause damage to
your device or other equipment
Note—notes, usage tips, or additional
information
Refer to—pages with related information; for
►
example:
► p.12 (represents “see page 12”)
→
Followed by—the order of options or menus
you must select to perform a step; for example:
In Idle mode, open the application list and select
This user manual is protected under international
copyright laws.
No part of this user manual may be reproduced,
distributed, translated, or transmitted in any form or by any
means, electronic or mechanical, including photocopying,
recording, or storing in any information storage and
retrieval system, without the prior written permission of
Samsung Electronics.
Using this manual
4
Trademarks
SAMSUNG and the SAMSUNG logo are registered •
trademarks of Samsung Electronics.
The Android logo, Google Search
•
Google Mail
Google Talk
Bluetooth
•
SIG, Inc. worldwide.
Oracle and Java are registered trademarks of Oracle and/
•
or its aliates. Other names may be trademarks of their
respective owners.
Wi-Fi
•
registered trademarks of the Wi-Fi Alliance.
All other trademarks and copyrights are the property of
•
their respective owners.
, YouTube™, Android Market™, and
™
are trademarks of Google, Inc.
™
is a registered trademark of the Bluetooth
®
, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
Battery•
Travel adapter (charger)•
User manual•
Use only Samsung-approved software. Pirated or
illegal software may cause damage or malfunctions
that are not covered by your manufacturer's
warranty.
The items supplied with your device may vary •
depending on the software and accessories
available in your region or oered by your service
provider.
You can obtain additional accessories from your
•
local Samsung dealer.
The supplied accessories perform best for your
•
device.
Accessories other than the supplied ones may not
•
be compatible with your device.
Install the RUIM card and battery
When you subscribe to a cellular service, you will receive
a Removable User Identity Module (RUIM) card, with
subscription details, such as your personal identication
number (PIN) and optional services.
Assembling
9
Page 10
To install the RUIM card and battery,
If the device is on, press and hold [
1
Power o to turn it o.
Remove the back cover.
2
Be careful not to damage your ngernails when you
remove the back cover.
Assembling
10
] and select
Insert the RUIM card.
3
Place the RUIM card into the device with the gold-•
coloured contacts facing down.
If you do not insert a RUIM card, you can only use
•
your device’s non-network services and some
menus.
Page 11
Insert the battery.
4
Replace the back cover.
5
Charge the battery
Before using the device for the rst time, you must charge
the battery.
You can charge the device with the provided travel adapter
or by connecting the device to a PC with a PC data cable.
Use only Samsung-approved chargers and cables.
Unauthorised chargers or cables can cause batteries
to explode or damage your device.
When your battery is low, the device will emit a
warning tone and display a low battery message.
The battery icon
battery level becomes too low, the device will
automatically power o. Recharge your battery to
continue using your device.
will also be empty. If the
Assembling
11
Page 12
Charge with the travel adapter
›
Open the cover to the multifunction jack on the top of
1
the device.
Plug the small end of the travel adapter into the
2
multifunction jack.
Improperly connecting the travel adapter can cause
serious damage to the device. Any damage caused
by misuse is not covered by the warranty.
Assembling
12
Plug the large end of the travel adapter into a power
3
outlet.
You can use the device while it is charging, but it •
may take longer to fully charge the battery.
While the device is charging, the touch screen may
•
not function due to an unstable power supply. If
this happens, unplug the travel adapter from the
device.
While charging, the device may heat up. This
•
is normal and should not aect your device’s
lifespan or performance.
If your device is not charging properly, bring your
•
device and the charger to a Samsung Service
Centre.
Page 13
When the battery is fully charged (the battery icon is
4
no longer moving), unplug the travel adapter from the
device and then from the power outlet.
Do not remove the battery before removing the
travel adapter. Doing this may cause damage to the
device.
To save energy, unplug the travel adapter when not
in use. The travel adapter does not have a power
switch, so you must unplug the travel adapter from
the outlet to interrupt the power supply. The travel
adapter should remain close to the socket when
in use.
Charge with the PC data cable
›
Before charging, ensure that your PC is turned on.
Open the cover to the multifunction jack on the top of
1
the device.
Plug one end (micro-USB) of the PC data cable into the
2
multifunction jack.
Plug the other end of the PC data cable into a USB port
3
on a PC.
Depending on the type of PC data cable you are
using, it may take some time before charging
begins.
When the battery is fully charged (the battery icon is
4
no longer moving), unplug the PC data cable from the
device and then from the PC.
Insert a memory card (optional)
To store additional multimedia les, you must insert
a memory card. Your device accepts microSD
microSDHC
of 32 GB (depending on memory card manufacturer and
type).
memory cards with maximum capacities
™
or
™
Assembling
13
Page 14
Samsung uses approved industry standards for
memory cards, but some brands may not be fully
compatible with your device. Using an incompatible
memory card may damage your device or the
memory card and can corrupt data stored on the
card.
Your device supports only the FAT le structure for •
memory cards. If you insert a card formatted with
a dierent le structure, your device will ask you to
reformat the memory card.
Frequent writing and erasing of data will shorten
•
the lifespan of memory cards.
When you insert a memory card in your device,
•
the le directory of the memory card will appear
in the sdcard folder.
Assembling
14
Open the cover to the memory card slot on the side of
1
the device.
Insert a memory card with the gold-coloured contacts
2
facing down.
Push the memory card in the memory card slot until it
3
locks in place.
Close the cover to the memory card slot.
4
Page 15
Remove the memory card
›
Before removing a memory card, rst unmount it for safe
removal.
In Idle mode, select
1
phone storage
Open the cover to the memory card slot on the side of
2
the device.
Push the memory card gently until it disengages from
3
the device.
Pull the memory card out of the memory card slot.
4
Close the cover to the memory card slot.
5
Do not remove a memory card while the device is
transferring or accessing information, as this could
result in loss of data or damage to the memory card
or device.
→ Settings → SD card and
→
Unmount SD card → OK.
Format the memory card
›
Formatting your memory card on a PC may cause
incompatibilities with your device. Format the memory
card only on the device.
In Idle mode, select
→
storage
Format SD card
Unmount SD card → OK → Format SD card →
Before formatting the memory card, remember to
make backup copies of all important data stored on
your device. The manufacturer’s warranty does not
cover loss of data resulting from user actions.
→ Settings → SD card and phone
→
Eraseeverything.
Assembling
15
Page 16
Attach a hand strap (optional)
Remove the back cover.
1
Slide a hand strap through the slot and hook it over
2
the small projection.
Replace the back cover.
3
Assembling
16
Page 17
Getting started
Turn your device on and o
To turn on your device,
Press and hold [
1
If you turn on your device for the rst time, follow the
2
on-screen instructions to set up your device.
To turn o your device, press and hold [
Power o.
Follow all posted warnings and directions from •
ocial personnel when in areas where the use of
wireless devices is restricted, such as aeroplanes
and hospitals.
To use your device's non-network services only,
•
switch to Airplane mode. Press and hold [ ] and
select Airplane mode.
].
] and select
Get to know your device
Device layout
›
Proximity sensor
Volume key
Menu key
Earpiece
Touch screen
Home key
Back key
Mouthpiece
Getting started
17
Page 18
Headset jack
Power/Lock key
Memory card slot
Speaker
Getting started
18
Multifunction jack
Camera lens
Back cover
Internal antenna
Keys
›
KeyFunction
Turn on the device (press and
Power/
Lock
Menu
Home
BackReturn to the previous screen.
VolumeAdjust the device’s volume.
hold); Access the quick menus
(press and hold); Lock the touch
screen.
Open a list of options available on
the current screen.
Return to the idle screen; Open
the list of recent applications
(press and hold).
Page 19
Indicator icons
›
Icons shown on the display may vary depending on
your region or service provider.
IconDenition
No signal
Signal strength
WLAN activated
Bluetooth activated
Bluetooth headset connected
GPS activated
Call in progress
IconDenition
Speakerphone activated
Missed call
Synchronised with the web
Uploading data
Downloading data
Connected to PC
Mobile AP activated
No RUIM card
New text or multimedia message
New email message
Getting started
19
Page 20
IconDenition
Alarm activated
Event notication
Roaming (outside of normal service area)
Silent mode activated
Airplane mode activated
Vibration mode activated
Music playback in progress
FM radio turned on in the background
Error occurred or caution required
Battery power level
10:00
Current time
Getting started
20
Use the touch screen
Your device’s touch screen lets you easily select items or
perform functions. Learn basic actions to use the touch
screen.
To avoid scratching the touch screen, do not use •
sharp tools.
Do not allow the touch screen to come into
•
contact with other electrical devices. Electrostatic
discharges can cause the touch screen to
malfunction.
Do not allow the touch screen to come into
•
contact with water. The touch screen may
malfunction in humid conditions or when
exposed to water.
Page 21
For optimal use of the touch screen, remove the •
screen protection lm before using your device.
Your touch screen has a layer that detects small
•
electrical charges emitted by the human body.
For best performance, tap the touch screen with
your ngertip. The touch screen will not react to
touches of sharp tools, such as a stylus or pen.
Control your touch screen with the following actions:
Tap: Touch once with your nger to select or launch a
•
menu, option, or application.
Tap and hold: Tap an item and hold it for more than 2
•
seconds to open a pop-up option list.
Drag: Tap and drag your nger up, down, left, or right to
•
move to items on lists.
Drag and drop: Tap and hold your nger on an item, and
•
then drag your nger to move the item.
Double-tap: Tap twice quickly with your nger to zoom •
in or out while viewing photos or web pages.
Your device turns o the touch screen when you •
do not use the device for a specied period.
You can adjust the backlight time. In Idle mode,
•
open the application list and select Settings →
→
Display
Screen timeout.
Lock or unlock the touch screen
and keys
You can lock the touch screen and keys to prevent any
unwanted device operations.
To lock, press [
right until it reaches the dot.
]. To unlock, turn on the screen and drag
Getting started
21
Page 22
Get to know the idle screen
When the device is in Idle mode, you will see the idle
screen. From the idle screen, you can view your device’s
status and access applications.
The idle screen has multiple panels. Scroll left or right to a
panel of the idle screen.
Add items to the idle screen
›
You can customise the idle screen by adding shortcuts to
applications or items in applications, widgets, or folders. To
add items to the idle screen,
Press [
1
2
22
] → Add or tap and hold the empty area on
the idle screen.
Select the item category
•: Add widgets. Widgets are small
Widgets
applications that provide convenient functions and
information on your idle screen.
Getting started
→
an item:
Shortcuts•: Add shortcuts to items, such as
applications, bookmarks, and contacts.
Folders
•: Create a new folder or add folders for your
contacts.
Wallpapers
•: Set a background image.
Move items on the idle screen
›
Tap and hold an item to move until the item appears
1
gre y.
Drag the item to the location you want.
2
Remove items from the idle screen
›
Tap and hold an item to remove.
1
The trash bin appears at the bottom of the idle screen.
Drag the item to the trash bin.
2
When the item turns red, release the item.
3
Page 23
Use the shortcuts panel
›
In Idle mode or while using an application, tap the
indicator icons area and drag your nger down to open
the shortcuts panel. You can activate or deactivate wireless
connection features and access a list of notications, such
as messages, calls, events or processing status. To hide the
list, drag the bottom of the list up.
From the shortcuts panel, you can use the following
options:
Wi-Fi
•: Activate or deactivate the WLAN connection
feature.
► p. 83
Bluetooth
•: Activate or deactivate the Bluetooth wireless
connection feature.
GPS
•: Activate or deactivate the GPS feature.
Silent
•: Activate or deactivate Silent mode.
Auto rotation
•: Activate or deactivate the auto rotation.
Available options may vary depending on your
region or service provider.
► p. 81
Add or remove panels to the idle screen
›
You can add or remove panels of the idle screen to
organise widgets according to your preferences and needs.
In Idle mode, press [
1
You can also place your two ngers on the screen and
pinch to switch to Edit mode.
Add or remove panels by using the following features:
2
To remove a panel, tap and hold the thumbnail of a •
panel and drag it to the trash bin at the bottom of
the screen.
To add a new panel, select
•.
•
To change the order of the panels, tap and hold the
thumbnail of a panel and drag it to the location you
want.
When you are nished, press [
3
] → Edit.
].
Getting started
23
Page 24
Access applications
To access your device’s applications,
In Idle mode, select
1
Scroll left or right to another application screen.
2
Select an application.
3
When you use applications provided by Google, •
you must have a Google account. If you do not
have a Google account, sign up for a Google
account.
You can add a shortcut to an application by
•
tapping and holding the application icon from
the application list. You can move the icon to the
location you want on the idle screen.
Getting started
24
to access the application list.
Press [4 ] to return to the previous screen; Press the
Home key to return to the idle screen.
Your device has a built-in motion sensor that detects
its orientation. If you rotate the device while using
some features, the interface will automatically
switch to landscape view. To set the interface to
keep the orientation when you rotate the device,
select Settings
Organise applications
›
You can reorganise the applications in the application list
by changing their order or grouping them into categories
to suit your preferences and needs.
In the application list, press [
1
Tap and hold an application.
2
→
Display → Auto-rotate screen.
] → Edit.
Page 25
Drag the application icon to the location you want.
3
You can move an application icon to another
main menu screen. You can also move most-used
applications next to
Press [
4
To change the order of the main menu screens,
1
2
›
1
2
] → Save.
In the application list, place your two ngers on the
screen and pinch.
Tap and hold the thumbnail of a screen and drag it to
the location you want.
Access recent applications
Press and hold the Home key to open the list of
applications you have accessed recently.
Select an application to access.
.
Use the task manager
›
Your device is a multitasking device. It can run more than
one application at the same time. However, multitasking
may cause hang-ups, freezing, memory problems, or
additional power consumption. To avoid these problems,
end unnecessary programs using the task manager.
In Idle mode, open the application list and select
1
2
→
manager
The list of all the applications currently running on
your device appears.
To close an application, select
To close all active applications, select Endall.
Active applications.
End.
Task
Getting started
25
Page 26
Customise your device
Get more from your device by customising it to match your
preferences.
Set the current time and date
›
In Idle mode, open the application list and select
1
Settings→ Date and time.
Set the time and date and change other options.
2
Turn on or o the touch tone
›
In Idle mode, open the application list and select Settings
→
Sound → Audible selection.
Adjust the volume of the ringtones
›
Press the Volume key up or down to adjust the ringtone
volume.
Getting started
26
Switch to Silent mode
›
To mute or unmute your device, do one of the following:
In Idle mode, open the application list and select
•
Keypad and tap and hold
Open the shortcuts panel from the top of the screen and
•
select Silent.
Press and hold [
•] and select Silent mode.
Change your ringtone
›
In Idle mode, open the application list and select
1
Settings→ Sound → Phone ringtone.
Select a ringtone from the list and select
2
Activate animation for switching
›
.
→
OK.
windows
In Idle mode, open the application list and select Settings
→
Display → Animation → Some animations or All
animations.
Page 27
Select a wallpaper for the idle screen
›
In Idle mode, press [1 ] →Wallpaper → an option.
Select an image.
2
Select 3 Save or Setwallpaper.
Samsung is not responsible for any use of default
images or wallpapers provided on your device.
Adjust the brightness of the display
›
In Idle mode, open the application list and select
1
Settings→ Display → Brightness.
Drag the slider
2
Select
3
The brightness level of the display will aect how
quickly the device consumes battery power.
to adjust the level of brightness.
OK.
Set a screen lock
›
You can lock the touch screen with an unlock pattern or
password to prevent unauthorised people from using the
device without your permission.
Once you set a screen lock, your device will require •
an unlock code each time you turn it on or unlock
the touch screen.
If you forget your PIN or password, bring your
•
device to a Samsung Service Centre to reset it.
Samsung is not responsible for any loss of security
•
codes or private information or other damages
caused by illegal software.
Getting started
27
Page 28
Set an unlock pattern
In Idle mode, open the application list and select
1
Settings → Location and security → Set screen lock
→
Pattern.
See the on-screen instructions and example patterns
2
and select Next (if necessary).
Draw a pattern by dragging your nger to connect at
3
least 4 dots.
Select
4
5
Set an unlock PIN code
1
Continue.
Draw a pattern again to conrm.
Select 6 Conrm.
In Idle mode, open the application list and select
Settings→ Location and security → Set screen lock
→
PIN.
Getting started
28
Enter a new PIN (numeric) and select 2 Continue.
Enter the PIN again and select
3
Set an unlock password
In Idle mode, open the application list and select
1
Settings → Location and security → Set screen lock
→
Password.
Enter a new password (alphanumeric) and select
2
Enter the password again and select
3
Lock your RUIM card
›
You can lock your device by activating the PIN supplied
with your RUIM card.
In Idle mode, open the application list and select
1
Settings → Location and security → Set RUIM card
→
lock
Lock RUIM Card.
Enter your PIN and select
2
OK.
OK.
OK.
OK.
Page 29
Once the PIN lock is enabled, you must enter the PIN each
time you turn on the device.
If you enter an incorrect PIN too many times, your •
RUIM card will be blocked. You must enter a PIN
unlock key (PUK) to unblock the RUIM card.
If you block your RUIM card by entering an
•
incorrect PUK, bring the card to your service
provider to unblock it.
Enter text
You can enter text by selecting characters on the virtual
keypad or by inputting handwriting on the screen.
You cannot enter text in some languages. To enter
text, you should change the writing language to one
of the supported languages.
► p. 101
Change the keyboard type
›
You can change the keyboard type. Tap and hold the text
input eld and select Input method
(Swype or Samsung keypad).
Enter text using the Swype keyboard
›
Select the rst character of a word and drag your nger
1
to the second character without releasing the nger
from the screen.
Pause on the second character for a moment and drag
2
the nger to the next character.
→
a keyboard type
Getting started
29
Page 30
Continue until you have nished the word.
3
You can also use the following keys:
Release the nger on the last character.
4
Repeat steps 1-4 to complete your text.
5
You can also tap the keys to enter text.•
You can tap and hold a key to enter characters on •
the upper half of the key. When you tap and hold
a key until the character list appears, you can enter
special characters, symbols, and numbers.
Getting started
30
1
2
3
NumberFunction
1
Change case.
Access the swype tip screen; Open the help
2
information (tap and hold).
Switch between Symbol mode and ABC/
3
Number mode.
4
Delete characters.
5
Start a new line.
4
5
6
7
Page 31
NumberFunction
Enter text by voice; This icon is available only
when you activate the voice input feature
for the Samsung keypad.
6
7
Enter text using the Samsung keypad
›
Select 1 → Portrait keypad types and select a text
input method.
You can select one of key input methods (QWERTY or
traditional keypad) or handwriting input methods.
Enter text by selecting alphanumeric keys or writing
2
on the screen.
This feature may be unavailable
depending on the selected input
language.
Insert a space.
You can also use the following keys:
1
2
3
NumberFunction
1
Change case.
Switch between Number/Symbol mode and
2
ABC mode.
Enter text by voice; This icon is available only
when you activate the voice input feature
for the Samsung keypad.
3
This feature may be unavailable
depending on the selected input
language.
4
5
6
7
Getting started
31
Page 32
NumberFunction
4
Clear your input.
5
Start a new line.
Access the keypad settings; Change the text
6
input method (tap and hold).
Insert a space.
7
If you have text input keyboards downloaded from
the web, you can change the keypad type. Tap and
hold the text input eld and select Input method
a keypad type.
Getting started
32
Functions of this key may vary
depending on your service provider or
keypad settings.
Copy and paste text
›
While you are entering text, you can use the copy and
paste feature to use text in other applications.
Place the cursor where you want to start.
1
Tap and hold the text input eld.
2
Select 3 Select text from the option list.
Tap on the place where you want to end.
4
Tap and hold the highlighted text.
5
Select 6 Copy to copy, or Cut to cut the text onto the
→
clipboard.
In another application, tap and hold the text input
7
eld.
Select
8
Paste to insert the text from the clipboard into
the text eld.
Page 33
Download applications from
Android Market
Based on the Android platform, your device’s functionality
can be extended by installing additional applications.
Android Market provides you an easy and quick way to
shop for games and mobile applications.
This feature may be unavailable depending on •
your region or service provider.
Your device will save user les from downloaded
•
applications to the internal memory.
Install an application
›
In Idle mode, open the application list and select
1
Market.
Select
2
3
Accept when the terms and conditions appear.
Select an item category
→
an item.
Select 4 Install (for free items) or Buy.
If you select Install, select OK to download the item
immediately.
If you select Buy, you need to enter your credit card
information. Follow the on-screen instructions.
Uninstall an application
›
From the Android Market home screen, select 1 My
apps.
Select the item you want to delete.
2
Select 3 Uninstall → OK.
Download les from the web
When you download les or web applications from the
web, your device saves them in a memory card.
Getting started
33
Page 34
Files you download from the web can include
viruses that will damage your device. To lessen your
risk, only download les from sources you trust.
Some media les include Digital Rights
Management to protect copyrights. This protection
may prevent you from downloading, copying,
modifying, or transferring some les.
To download les from the web,
In Idle mode, open the application list and select
1
Internet.
Search for a le or application and download it.
2
To install applications downloaded from websites other
than Android Market, you must select SettingsApplications→ Unknown sources.
Getting started
34
→
Synchronise data
You can synchronise data with various web servers and
back up or restore your data.
Once the synchronisation is completed, your device stays
connected to the web. If any change is made on the web,
the updated information will appear on your device and
will automatically begin synchronisation, and vice versa.
This feature may be unavailable depending on your
region or service provider.
Set up a server account
›
In Idle mode, open the application list and select
1
Settings→ Accounts and sync.
Select
2
Add account→ an account type.
Page 35
Follow the on-screen instructions to complete the
3
account setup.
For online community services, such as Facebook or
MySpace, enter your user name and password and
select Log in.
Activate automatic sync
›
In Idle mode, open the application list and select
1
Settings→ Accounts and sync.
Select
2
3
4
To exclude applications from automatic synchronisation,
clear the check boxes next to the applications you want.
Auto-sync.
Select an account.
Select the applications you want to synchronise.
Synchronise data manually
›
In Idle mode, open the application list and select
1
Settings→ Accounts and sync.
Select an account.
2
Press [3 ] → Sync now. Your device will start
synchronising the data you set for synchronisation.
Getting started
35
Page 36
Communication
Calling
Learn to use calling functions, such as making and
answering calls, using options available during a call or
customising and using call-related features.
Make and answer a call
›
You can use the buttons or the touch screen when you
make, accept, end, or reject calls.
When you hold the device near your face, your
device automatically turns o and locks the touch
screen to prevent accidental inputs.
Communication
36
Make a call
In Idle mode, open the application list and select 1 →
Keypad, and enter an area code and a phone number.
Select
2
3
Answer a call
2
to make a call.
To end the call, select
Use the phonebook to save numbers you dial •
frequently. ► p. 63
To quickly access the call log to redial the numbers
•
you dialled recently, select → Logs.
When a call comes in, drag 1 right until it reaches the
dot.
When the device is ringing, press the Volume key to
mute the ringtone.
To end the call, select
Call end.
Call end.
Page 37
Reject a call
When a call comes in, drag left until it reaches the dot.
The caller will hear a busy tone.
Call an international number
In Idle mode, open the application list and select 1 →
Keypad, and tap and hold 0 to insert an international
call prex.
Enter the complete number you want to dial (country
2
code, area code and phone number), and then select
to dial the number.
You can change to another prex or add a new
prex. In Idle mode, open the application list and
select Settingsprex.
→
Callsettings → International
Use the headset
›
By plugging a headset into the device, you can answer and
control calls hands-free:
To answer a call, press the headset button.
•
To reject a call, press and hold the headset button.•
To place a call on hold or retrieve a held call during a call, •
press and hold the headset button.
To end a call, press the headset button.
•
Use options during a call
›
You can use the following options while a call is in
progress:
To adjust the voice volume, press the Volume key up or
•
down.
Communication
37
Page 38
To answer a second call, drag
• right until it reaches
the dot when a call waiting tone sounds. The rst call is
automatically placed on hold. You must subscribe to the
call waiting service to use this feature.
To open the dialling screen, select
•Dialpad.
To activate the speakerphone feature, select
•Speaker.
In noisy environments, you may have diculty
hearing some calls while using the speakerphone
feature. For better audio performance, use the
normal phone mode.
To turn o the microphone so that the other party
•
cannot hear you, select Mute.
To listen and talk to the other party via a Bluetooth
•
headset, select Headset.
To dial a second call, select
•Add call and then dial a new
number.
Communication
38
To open the phonebook, press [•] → Contacts.
To add a memo, press [
•]
View and dial missed calls
›
Your device will display calls you have missed. To dial the
number of a missed call, open the shortcuts panel and
select the missed call notication.
Use additional features
›
You can use various other call-related features, such as
auto rejection, call diverting or barring.
→
Memo.
Set auto rejection
Use auto rejection to reject calls from certain numbers
automatically. To activate auto rejection and set up the
reject list,
Page 39
In Idle mode, open the application list and select
1
Settings → Call settings → All calls →Auto reject.
Select
2
3
4
5
6
Set call forwarding
Call diverting is a network feature to send incoming calls to
another number that you specify. You can set this feature
separately for several conditions when you are not able to
answer calls, such as when you are already on the phone or
when you are outside of the service area.
1
Enableautoreject to activate auto rejection.
Select
Auto reject number list.
Press [
] →Create.
Enter a number to reject and select
To add more numbers, repeat steps 4-5.
In Idle mode, open the application list and select
Settings → Call settings →Voice call.
Save.
Select 2 Call forwarding →a condition.
Enter a number to which calls will be forwarded and
3
select OK.
Your setting will be sent to the network.
Set call barring
Call barring is a network feature to restrict certain types of
calling or to prevent others from making calls with your
device.
In Idle mode, open the application list and select
Enter a call waiting number and select 3 OK.
Your setting will be sent to the network.
View call logs
›
You can view logs of your calls ltered by their types.
In Idle mode, open the application list and select
1
→
Logs.
Press [
2
40
] → View by → an option to sort the call logs.
From the call logs, you can make a call or send a
message directly to a contact by icking the contact
to the left or right.
Communication
Select a log to view its details.
3
From the detail view, you can dial the number, send
a message to the number or add the number to the
phonebook.
Messaging
Learn to create and send text (SMS) or multimedia (MMS)
messages, and view or manage messages you have sent
or received.
You may incur additional charges for sending or
receiving messages while outside your home service
area. For details, contact your service provider.
Send a text message
›
In Idle mode, open the application list and select 1 →
New message.
Page 41
Select
2
3
4
5
2
Contacts.
You can enter a number manually or select one from
the logs or contact groups by selecting another option.
Select contacts and select
Select
Tap to compose and enter your message text.
To insert emoticons, press [
Select
Send to send the message.
Send a multimedia message
›
In Idle mode, open the application list and select 1 →
New message.
Select
Contacts.
You can enter a number manually or select one from
the logs or contact groups by selecting another option.
When you enter an email address, the device will
convert the message to a multimedia message.
Add.
] → Insert smiley.
Select contacts and select 3 Add.
Select
4
5
6
7
Tap to compose and enter your message text.
To insert emoticons, press [
Select
→ an option and add an item.
You can select a le from the le list or create a new
photo, video, or sound.
Press [
] → Add subject and add a subject for the
message.
Select
Send to send the message.
View a text or multimedia message
›
In Idle mode, open the application list and select 1 .
Your messages are grouped into message threads by
contact, like a messenger.
] → Insert smiley.
Communication
41
Page 42
Select a contact.
2
Select a text or multimedia message from the message
3
thread.
Google Mail
You can retrieve new email messages from Google Mail™
to your Inbox. When you access this application, the Inbox
screen appears. The total number of unread messages
displays in the title bar and unread messages display in
bold. If you have labelled a message, its label appears in a
coloured rectangle on the message.
This feature may be unavailable depending on •
your region or service provider.
This Google Mail menu may be labelled dierently
•
depending on your service provider.
Communication
42
Send an email message
›
In Idle mode, open the application list and select
1
Gmail.
Press [
2
3
4
6
›
1
2
] → Compose.
Enter a name or address in the recipient eld.
Enter a subject and message.
To attach an image le, press [5 ] → Attach → a le.
Select
to send the message.
View email messages
In Idle mode, open the application list and select
Gmail.
Select an email message.
Page 43
From the message view, use the following options:
To reply to the message, select
•.
To reply to the message including all recipients, select
•
→
Reply all.
To forward the message to other people, select
•
Forward.
To add a star to the message, select
•.
To view an attachment, select
•Preview. To save it to your
memory card, select Download.
To archive the message, select
•Archive.
To delete the message, select
•Delete.
To move to the previous or next message, select
•
or .
Organise email by labels
›
You can organise your email by labelling your messages
or adding stars to mark important messages. You can sort
messages by label lter.
→
Add a label to a message
From the Inbox screen, tap and hold a message.
1
Select 2 Change labels.
Select a label to add and select
3
OK.
Add a star to a message
From the Inbox screen, tap and hold a message.
1
Select 2 Add star. The star icon next to the message is
activated.
Filter messages
From the Inbox screen, press [1 ] → Go to labels.
Select the label of the messages you want to view.
2
Communication
43
Page 44
Email
Learn to send or view email messages via your personal or
company email account.
Set up an email account
›
In Idle mode, open the application list and select
1
Email.
Enter your email address and password.
2
Select 3 Next (for general email accounts) or Manual
setup (for other company email accounts).
Follow the on-screen instructions.
4
When you are nished setting up the email account, the
email messages are downloaded to your device. If you
have created more than two accounts, you can switch
between email accounts; Press [
select one you want to retrieve messages from.
Communication
44
] → Accounts and
Send an email message
›
In Idle mode, open the application list and select 1 Email
→
an email account.
Press [
2
3
4
5
6
] → Compose.
Select
Contacts.
You can enter an email address manually or select one
from the logs or contact groups by selecting another
option.
Select the Cc/Bcc eld and add more recipients.
Select the subject eld and enter a subject.
Select the text input eld and enter your email text.
Select7 Attach and attach a le.
You can select a le from the le list or create a new
photo, video, or sound.
Page 45
Select
8
When you open an email account, you can view previously
retrieved emails oine or connect to the email server to
view new messages. After retrieving email messages, you
can view them oine.
1
2
3
Send to send the message.
If you are oine or outside your service area, the
message will be held in the message thread list until
you are online and in your service area.
View an email message
›
In Idle mode, open the application list and select
→
an email account.
Press [
] → Refresh to update the message list.
Select an email message.
Email
From the message view, use the following options:
To reply to the message, press [
•]
To forward the message to other people, press [
•]
Forward.
To delete the message, press [
•]
To move the message to another folder, press [
•]
Move to.
To load images from the message, press [
•]
pictures.
To view an attachment, select the attachment item. To
•
save it to your memory card, select .
→
→
Delete.
Reply.
→
Show
→
→
Communication
45
Page 46
Talk
Learn to chat with friends and family via Google Talk™.
This feature may be unavailable depending on your
region or service provider.
Add friends to your friend list
›
In Idle mode, open the application list and select 1 Talk.
The friend list shows all of your Google Talk contacts
at a glance.
Press [
2
3
When your friend accepts the invitation, the friend is
added to your friend list.
46
] → Add friend.
Enter an email address of the friend and select
invitation.
Communication
Send
Start a chat
›
In Idle mode, open the application list and select 1 Talk.
Select a friend from the friend list. The chat screen
2
opens.
Enter your message and select
3
To insert emoticons, press [
smiley.
To switch between active chats, press [
4
chats.
To end the chat, press [
5
Send.
] → More → Insert
] → Switch
] → End chat.
Page 47
Social Hub
Learn to access Social Hub™, the integrated
communication application for Social Network Service
(SNS), email, messages, instant messages (IM), contacts or
calendar information. Visit socialhub.samsungmobile.com
for more details.
In Idle mode, open the application list and select
1
Social Hub.
Check and use contents delivered from Social Hub.
2
Communication
47
Page 48
Entertainment
Camera
Learn how to capture and view photos and videos. You
can take photos at resolutions up to 2048 x 1536 pixels
(3.2 megapixels) and videos at resolutions up to 320 x 240
pixels.
To use the camera, you must rst insert a memory card.
The camera interface appears only in the •
landscape orientation.
Tap the screen to hide or display icons in the
•
viewnder.
The camera automatically turns o when you do
•
not use it for a specied period.
The memory capacity may dier depending on
•
the shooting scene or shooting conditions.
Entertainment
48
Capture a photo
›
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Aim the lens at the subject and make any necessary
3
adjustments.
1
2
3
4
5
6
7
8
Page 49
NumberFunction
Check the camera status and settings.
• : Resolution
• : Exposure metre type
1
• : Number of photos you can
take (according to available memory)
• : Storage location
• : Battery power level
2
Change the shooting mode.
3
Change the scene mode.
4
Adjust the brightness.
5
Change the camera settings.
6
Switch to the camcorder.
NumberFunction
7
Capture a photo.
8
View the photo you captured last.
Press the Volume key to zoom in or out.
4
Select 5 to take a photo.
The photo is saved automatically.
After taking photos, select
To view more photos, scroll left or right.
•
To zoom in or out, tap the screen and select • or . You
can also double-tap the screen to zoom in or out.
To send a photo to others, select
•Share.
To set a photo as wallpaper or a caller ID image for a
•
contact, select Set as.
To delete a photo, select
•Delete.
to view the taken photos.
Entertainment
49
Page 50
Capture a photo by using preset
›
options for various scenes
Your camera provides you with predened settings for
various scenes. You can simply select the proper mode for
your shooting condition and subjects.
For example, when you take photos at night, select the
night mode that uses an extended exposure.
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Select 3 → a scene.
Make any necessary adjustments.
4
Select 5 to take a photo.
Entertainment
50
Capture a photo in Smile shot mode
›
Your camera can recognise people’s faces and help you
take photos of their smiling faces.
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Select 3 →Smile shot.
Make any necessary adjustments.
4
Select 5 .
Aim the camera lens at your subject.
6
Your device recognises people in an image and detects
their smiles. When the subject smiles, the device
automatically takes a photo.
Page 51
Capture a series of photos
›
You can easily take a series of photos of moving subjects.
This is useful when you are photographing children at play
or a sporting event.
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Select 3 → Continuous.
Make any necessary adjustments.
4
Tap and hold 5 . The camera will continue to take
photos until you release the key.
Capture a panoramic photo
›
You can take wide panoramic photos using Panorama
shooting mode. This mode is convenient for
photographing landscapes.
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Select 3 →Panorama.
Make any necessary adjustments.
4
Select 5 to take the rst photo.
Slowly move the device in any direction and align the
6
green frame with the viewnder.
When you have aligned the green frame and
viewnder, the camera will automatically take the next
photo.
Repeat step 6 to complete the panoramic photo.
7
Entertainment
51
Page 52
Capture a photo of action
›
You can capture shots of a moving subject and then
combine them into a single photo that shows the action.
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Select 3 → Action shot.
Make any necessary adjustments.
4
Select 5 to capture the rst photo.
Move the device to follow the moving subject.
6
The device automatically captures the next photos.
Continue to follow the subject until the device has
7
captured all the shots necessary for the action photo.
Entertainment
52
Customise camera settings
›
Before taking a photo, select → to access the
following options:
OptionFunction
Timer
ResolutionChange the resolution option.
White
balance
Eects
Metering Select a type of exposure metre.
Image
quality
Adjust
Select the length of the delay before the
camera takes a photo.
Adjust the colour balance according to
lighting conditions.
Apply a special eect, such as sepia or
black and white tones.
Set the quality level for your photos.
Adjust contrast, saturation, and
sharpness.
Page 53
Before taking a photo, select → to access the following
settings:
SettingFunction
Guidelines
Review
GPS
Shutter
sound
ResetReset menus and shooting options.
Display the guidelines on the preview
screen.
Set the camera to display the taken
image.
Set the camera to include location
information for your photos.
To improve GPS signals, avoid
shooting in locations where the
signal may be obstructed, such
as between buildings or in lowlying areas, or in poor weather
conditions.
Set the camera shutter to make a sound
when capturing a photo.
Record a video
›
In Idle mode, open the application list and select
1
Camera.
Rotate the device anti-clockwise to landscape view.
2
Select 3 to switch to the camcorder.
Aim the lens at the subject and make any necessary
4
adjustments.
1
2
3
4
5
6
7
Entertainment
53
Page 54
NumberFunction
1
2
3
4
Entertainment
54
Check the camcorder status and
settings.
• : Resolution
• : Length of video that can
be recorded (according to available
memory)
• : Storage location
• : Battery power level
Change the recording mode (for
attaching to a multimedia message or
for saving normally).
Adjust the brightness.
Change the camcorder settings.
NumberFunction
5
Switch to the camera.
6
Record a video.
7
View the video you recorded last.
Press the Volume key to zoom in or out.
5
Select 6 to start recording.
Select
7
to stop recording.
The video is saved automatically.
The camera may not be able to properly record
videos to a memory card with a slow transfer speed.
Page 55
After recording videos, select
videos.
To view more videos, scroll left or right.
•
To send a video to others, select •Share.
To play a video, select
•Play.
To delete a video, select
•Delete.
Customise camcorder settings
›
Before recording a video, select → to access the
following options:
OptionFunction
Timer
ResolutionChange the resolution option.
White balance
Select the length of the delay before
the camera starts recording a video.
Adjust the colour balance according
to lighting conditions.
to view the recorded
OptionFunction
Eects
Video qualitySet the quality level for your videos.
Adjust
Before recording a video, select
following settings:
SettingFunction
Guidelines
Audio recordingTurn the audio on or o.
Review
ResetReset menus and shooting options.
Apply a special eect, such as sepia
or black and white tones.
Adjust contrast, saturation, and
sharpness.
→ to access the
Display the guidelines on the
preview screen.
Set the camera to display the
recorded video.
Entertainment
55
Page 56
Gallery
Learn to view photos and play videos saved on your
memory card.
View a photo
›
In Idle mode, open the application list and select
1
Gallery.
Select a folder.
2
To change the view mode, select 3 or at the top
right of the screen.
Select a photo (with no icon) to view.
4
While viewing a photo, use the following options:
To view more photos, scroll left or right.
•
Entertainment
56
To zoom in or out, select • or . You can also tap the
screen with two ngers and spread them apart (move
your ngers closer together to zoom out).
To start a slideshow in the selected folder, select
•
Slideshow. Tap the screen to stop the slideshow.
Play a video
›
In Idle mode, open the application list and select
1
Gallery.
Select a video (with the
2
Rotate the device anti-clockwise to landscape view.
3
Control playback with the virtual keys.
4
Share images or videos
›
In Idle mode, open the application list and select
1
Gallery.
icon) to play.
Page 57
Select a folder.
2
Select an image or video le.
3
Press [4 ] → Share → a sharing option.
Music
Learn to listen to your favourite music while on the go with
the music player.
Add music les to your device
›
Start by transferring les to your device or memory card:
Download from the wireless web.
•► p. 70
Download from a PC with the optional Samsung Kies.
•
► p. 86
Receive via Bluetooth.
•► p. 82
Copy to your memory card.
•► p. 86
Play music
›
After transferring music les to your device or memory
card,
In Idle mode, open the application list and select
1
Music.
Select a music category
2
Control playback with the following keys:
3
1
2
3
→
a music le.
4
5
6
7
Entertainment
57
Page 58
NumberFunction
1
2
3
4
5
6
7
Entertainment
58
Pause playback; Select to resume
playback.
Skip backward; Scan backward in a le
(tap and hold).
Move to a point of the le by dragging
the bar.
Open the playlist.
Activate Shue mode.
Change the repeat mode (o, repeating
one le, or repeating all les).
Skip forward; Scan forward in a le (tap
and hold).
You can control playback with a headset: Press the
headset button to play or pause playback. You can
also press and hold the headset button to launch
the music player.
Create a playlist
›
In Idle mode, open the application list and select
1
Music.
Select a category
2
Press [
3
Enter a title for your new playlist and select
4
To add more music les to the playlist, play a le and
5
press [ ] → Add to playlist → the new playlist.
→
a music le.
] → Add to playlist → New.
Save.
Page 59
Use the party shue feature
›
When you turn on the party shue feature, your device
selects and plays music les randomly.
In Idle mode, open the application list and select
1
Music.
Press [
2
3
›
1
2
] → Party shue.
To turn o the party shue feature, press [
shue o.
Customise music player settings
In Idle mode, open the application list and select
Music.
Select a category
→
a music le.
] → Party
Press [3 ] → Settings.
Adjust the following settings to customise your music
4
player:
OptionFunction
Set whether or not to activate
5.1 channel
EqualiserSelect a default equaliser type.
the virtual 5.1 channel surround
sound system when a headset is
connected.
Entertainment
59
Page 60
FM radio
Learn to listen to music and news on the FM radio. To listen
to the FM radio, you must connect a headset, which serves
as the radio antenna.
Listen to the FM radio
›
Plug a headset into the device.
1
In Idle mode, open the application list and select 2 FM
radio.
The FM radio scans and saves available stations
automatically.
The rst time you turn on the FM radio, you will be
prompted to start automatic tuning.
Entertainment
60
Control the FM radio with the following keys:
3
1
2
3
4
NumberFunction
Turn o the FM radio; Select to turn
1
on the FM radio.
2
Change the frequency.
3
Search for an available radio station.
5
3
Page 61
NumberFunction
Add the current radio station to the
4
favourites list.
5
Adjust the volume.
Save a radio station automatically
›
Plug a headset into the device.
1
In Idle mode, open the application list and select 2 FM
radio.
Press [
3
] → Scan → a scanning option.
The FM radio scans and saves available stations
automatically.
Add a radio station to the favourites list
›
Plug a headset into the device.
1
In Idle mode, open the application list and select 2 FM
radio.
Select
3
4
to turn on the FM radio.
Scroll to the radio station you want.
Select 5 to add to the favourites list.
You can add a name for a radio station or remove
a radio station; Tap and hold a radio station on the
favourites list and select Remove or Rename.
Entertainment
61
Page 62
Customise FM radio settings
›
In Idle mode, open the application list and select 1 FM
radio.
Press [
2
3
62
] → Settings.
Adjust the following settings to customise your FM
radio:
OptionFunction
RegionSelect your region.
Set whether or not to run the FM
Background
playing
Entertainment
radio in the background while using
other applications. If this feature is
on, you can control the FM radio
from the shortcuts panel.
OptionFunction
Set whether or not to show the
Show station
ID
Alternative
frequency
FM auto o
station ID on the FM radio screen;
Station IDs are available only from
radio stations that provide this
information.
Set whether or not the FM radio
attempts to retune a radio station
when the current signal is weak.
Set the FM radio to automatically
turn o after a specied length of
time.
Page 63
Personal information
Contacts
Learn to create and manage a list of your personal or
business contacts. You can save names, mobile phone
numbers, home phone numbers, email addresses,
birthdays and more for your contacts.
Create a contact
›
In Idle mode, open the application list and select 1 .
Select
2
3
.
Select a memory location.
If you have more than one account, select an account
to which you want to add the contact.
Enter contact information.
4
Select 5 Save to add the contact to memory.
You can also create a contact from the dialling screen.
In Idle mode, open the application list and select
1
Keypad.
Enter a phone number.
2
Select 3 Add to Contacts →Create contact.
Select a memory location.
4
If you have more than one account, select an account
to which you want to add the contact.
Enter contact information.
5
Select 6 Save to add the contact to memory.
→
Personal information
63
Page 64
Find a contact
›
In Idle mode, open the application list and select 1 .
Scroll up or down on the contact list.
2
Select a contact’s name.
3
Once you nd a contact, you can:
call the contact by selecting a phone number.
•
send a message by selecting• Message.
send an email message by selecting an email address.
•
edit the contact information by pressing [•] → Edit.
Set a speed dial number
›
In Idle mode, open the application list and select 1 .
Press [
2
64
] → More → Speed dial.
Personal information
Select a location number
3
You can quickly dial this number by touching and
holding the location number from the dialling
screen.
Create your namecard
›
In Idle mode, open the application list and select 1 .
Press [
2
3
] → My prole.
Enter your own personal details.
Select 4 Save.
You can send your namecard by attaching it to a
message or email or transferring it via the Bluetooth
wireless feature.
→
a contact.
Page 65
Retrieve contacts from your community
›
accounts
You can view the list of community website accounts and
select an account to add a contact from the website to
your phone contacts.
In Idle mode, open the application list and select
1
Press [
2
3
›
By creating groups of contacts, you can manage multiple
contacts and send messages or email to an entire group.
Start by creating a group.
1
] → Get friends.
Select an account.
Create a group of contacts
In Idle mode, open the application list and select
→
Groups.
Press [2 ] → Create.
Enter a name and select a ringtone for the group.
3
Select 4 Save.
Copy contacts
.
›
To copy contacts from the RUIM card to your device,
In Idle mode, open the application list and select
1
Press [
2
3
To copy contacts from your device to the RUIM card,
1
] → Import/Export → Import from RUIM
card.
Select contacts to copy and select
In Idle mode, open the application list and select
.
Import.
.
Personal information
65
Page 66
] → Import/Export → Export to RUIM card.
Press [
2
Select contacts to copy and select
3
Import or export contacts
›
To import contact les (in vcf format) from a memory card
to your device,
In Idle mode, open the application list and select
1
Press [
2
3
4
5
66
] → Import/Export → Import from SD card.
Select a memory location.
If you have more than one account, select an account
to which you want to add the contact.
Select an option for importing a single contact le,
multiple contact les, or all contact les, and select OK.
Select contact les to import and select
Personal information
Export → Ye s .
.
OK.
To export contacts from your device to a memory card,
In Idle mode, open the application list and select
1
Press [
2
3
›
You can view the communication log of calls, messages,
email or SNS threads.
1
2
›
You can view the recent activities of contacts in social
network services, such as Facebook, MySpace, and Twitter.
] → Import/Export → Export to SD card.
Select
Ye s to conrm.
View the communication log
In Idle mode, open the application list and select
→
History.
Select an item you want to view.
View social network activities
.
Page 67
In Idle mode, open the application list and select 1 →
Activities.
Select an item you want to view.
2
Calendar
Learn to create and manage daily, weekly or monthly
events, and set alarms to remind yourself of important
events.
Create an event
›
In Idle mode, open the application list and select
1
Calendar.
Press [
2
3
] → More → Create.
Enter the details of the event as required.
Select 4 Done.
View events
›
To change the calendar view,
In Idle mode, open the application list and select
1
Calendar.
Press [
2
To view events of a specic date,
1
2
3
] and select Day, Week, or Month.
In Idle mode, open the application list and select
Calendar.
Select a date on the calendar.
To select today’s date, press [ ] → Tod a y.
Select an event to view its details.
Personal information
67
Page 68
Stop an event alarm
›
If you set an alarm for a calendar event, the event alarm
icon will appear at the specied time.
Open the shortcuts panel from the top of the screen.
1
Select a reminder to view more details about the
2
event.
To snooze or dismiss the reminder, select
3
or Dismiss all.
Snooze all
Memo
Learn to record important information to save and view at
a later date.
Create a memo
›
In Idle mode, open the application list and select
1
Memo.
Personal information
68
Select 2 Create memo or press [ ] → Create.
Enter your memo text.
3
Press [4 ] to hide the keypad.
Select a colour to change a background colour.
5
Select 6 Save.
View memos
›
In Idle mode, open the application list and select
1
Memo.
Select a memo to view its details.
2
You can send the memo to others by tapping and
holding the memo and selecting an option.
Page 69
Voice recorder
Learn to operate your device’s voice recorder.
To use the voice recorder, you must rst insert a memory
card.
Record a voice memo
›
In Idle mode, open the application list and select 1 Voice
recorder.
Select
2
3
5
Record to start recording.
Speak into the microphone.
When you are nished recording a memo, select 4 Stop.
Your memo is saved automatically.
To record more voice memos, select
bottom of the screen.
Record from the
Play a voice memo
›
In Idle mode, open the application list and select 1 Voice
recorder.
Select
2
3
List.
Select a voice memo to play.
You can send the voice memo to others by pressing
[
] → Share.
Personal information
69
Page 70
Web
Web services require a data connection. Contact your
operator to choose the best data plan.
Internet
Learn to access and bookmark your favourite web pages.
You may incur additional charges for accessing the •
web and downloading media. For details, contact
your service provider.
The web browser menu may be labelled
•
dierently depending on your service provider.
Available icons may vary depending on your
•
region or service provider.
Web
70
Browse web pages
›
In Idle mode, open the application list and select
1
Internet to launch a specied homepage.
To access a specic web page, select the URL input
eld, enter the web address of the web page, and
select Go.
Navigate web pages with the following keys:
2
1
2
Page 71
NumberFunction
Enter the web address of a web page
1
to access.
Open a list of saved bookmarks,
2
frequently visited pages and recent
internet history.
The screen may dier depending on your region or
service provider.
While browsing the web page, use the following options:
To zoom in or out, double-tap the screen. You can also
•
use the two nger zoom; Place your two ngers on the
screen and slowly pinch or spread apart.
To open a new window, press [
•]
To view the currently active windows, press [
•]
→
New window.
→
Windows. You can open multiple pages and switch back
and forth between them.
To reload the current web page, press [
•]
To go to the next page in history, press [
•]
To bookmark the current web page, press [
•]
→
Refresh.
→
Forward.
→
bookmark.
To add a shortcut to the current web page to the idle
•
screen, press [ ] → More → Add shortcut to Home.
To add the RSS feed, press [
•]
→
More → Add RSS
feeds.
To search for text on the web page, press [
•]
→
Find on page.
To view web page details, press [
•]
→
More → Page
info.
To send the web address of the web page to others,
•
press [ ] → More → Share page.
Add
More →
Web
71
Page 72
•]
To view the download history, press [
Downloads.
To customise browser settings, press [
•]
Settings.
Bookmark your favourite web pages
›
If you know the web address of a web page, you can
manually add a bookmark. To add a bookmark,
In Idle mode, open the application list and select
1
Internet.
Select
2
3
4
72
→Bookmarks.
Select
Add or press [ ] → Bookmark last-viewed
page.
Enter a page title and a web address.
Select 5 OK.
Web
→
More →
→
More →
From the bookmark list, tap and hold a bookmark and use
the following options:
To open the web page in the current window, select
•
Open.
To open the web page in a new window, select
•Open in
new window.
To edit the bookmark details, select
•Edit bookmark.
To add the bookmark shortcut to the idle screen, select
•
Add shortcut to Home.
To send the web address of the web page to others,
•
select Share link.
To copy the web address of the web page, select
•Copy
link URL.
To delete the bookmark, select
•Delete bookmark.
To use the web page as your homepage of the browser,
•
select Set as homepage.
Page 73
Access the frequently visited pages or
›
the recent history
In Idle mode, open the application list and select
1
Internet.
Select
2
3
→ Most visited or History.
Select a web page to access.
You can add a web page to the bookmark list by
selecting the star icon on the right.
Maps
Learn to use Google Maps™ to nd your location, search
the map for streets, cities, or countries, and get directions.
To receive better GPS signals, avoid using your device in
the following conditions:
between buildings, in tunnels or underground passages, •
or inside buildings
in poor weather
•
around high voltage or electromagnetic elds•
Do not touch the internal antenna area or cover this
area with your hands or other objects while using
the GPS functions.
This feature may be unavailable depending on your
region or service provider.
Activate location services to use with
›
Google Maps
You must activate location services to nd your location
and search the map.
In Idle mode, open the application list and select
1
Settings → Location and security.
Web
73
Page 74
Adjust the following settings to activate location
2
services:
OptionFunction
Use wireless
networks
Use GPS
satellites
Search for a specic location
›
In Idle mode, open the application list and select
1
Maps.
The map will display your current location.
If you are launching this application for the rst time,
2
select OK to conrm.
Press [
3
Web
74
Set to use WLAN and/or mobile
networks for nding your location.
Set to use the GPS satellite for
nding your location.
] → Search.
Enter a keyword for the location and select 4 .
•.
To search for a location by voice, select
• or .
To zoom in or out, select
•.
To add layers to the map, select
To add a star to the location, select the balloon of
the location name
Get directions to a specic destination
›
In Idle mode, open the application list and select
1
Maps.
Press [
2
3
] → Directions.
Enter the addresses of the starting location and the
ending location.
To enter an address from your contact list or point the
location on the map, select
on map.
→
.
→ Contacts or Point
Page 75
Select a travel method (car, bus, or walk) and select
4
Select a travel route to view details of your trip (if
5
necessary).
Select
6
7
.
When you are nished, press [
Map.
] → More → Clear
Go.
Select friends you want to add or enter an email
3
address, and select Add friends → Ye s .
When your friend accepts your invitation, you can
share locations.
Press [
4
] → See map.
Your friends’ locations are marked with their photos
on the map.
Latitude
Learn to share your location with your friends and view
friends’ locations via Google Latitude
In Idle mode, open the application list and select
1
Latitude.
The device automatically joins Latitude.
Press [
2
] → Add friends →Select from Contacts or
Add via email address.
.
™
Places
Learn to search for a place around you.
This feature may be unavailable depending on your
region or service provider.
In Idle mode, open the application list and select
1
Places.
Web
75
Page 76
Select a category.
2
Your device searches for places around your current
location that are related to the category.
Select a place name to view its details.
3
To view the place on the map, select .
Navigation
Learn to use the GPS navigation system to nd and show
your destination with voice guidance.
This feature may be unavailable depending on your
region or service provider.
In Idle mode, open the application list and select
1
Navigation.
If you are launching this application for the rst time,
2
select Accept.
Web
76
Enter your destination by using one of the following
3
methods:
•: Speak your destination such as
Speak Destination
“Navigate to destination.”
Type Destination
•: Enter your destination with the
virtual keypad.
Contacts
•: Select your destination from addresses of
your contacts.
Starred Places
•: Select your destination from the list
of your starred places.
Select
4
5
Install to use voice-guided navigation.
To end the navigation, press [
] → Exit Navigation.
Page 77
Google Search
You can search for applications in your device and specic
data on the web.
In Idle mode, open the application list and select
1
Google Search.
Enter a letter or a word of the data to search.
2
Select the item’s name you want to access.
3
YouTube
Learn to view and upload videos via YouTube.
This feature may be unavailable depending on your
region or service provider.
Watch videos
›
In Idle mode, open the application list and select
1
YouTube.
Select
2
3
4
5
Accept to conrm, if you are launching this
application for the rst time.
Select a video from the list.
Rotate the device anti-clockwise to landscape view.
Control playback with the following keys:
2
1
Web
77
Page 78
NumberFunction
Move to a point of the le by dragging
1
the bar.
2
Change the quality of the display.
Upload videos
›
In Idle mode, open the application list and select
1
YouTube.
Press [
2
3
4
78
] → Upload and select a video. Skip to 8.
If you want to upload new videos, select
the camera.
Rotate the device anti-clockwise to landscape view.
Aim the lens at the subject and make any adjustments.
Web
to turn on
Select 5 to start recording.
Select
6
7
8
to stop recording.
Select
Save to upload the video that you have
recorded.
Enter your user name and password and select
Sign in.
News & Weather
Learn to view the weather information and read top news
and other news articles.
View the weather information
›
In Idle mode, open the application list and select 1 News
& Weather.
Page 79
Select 2 Weather at the top of the screen.
Your device searches for your current location and
displays the weather information.
You can change the location to view the weather
information in another region. Press [
→
Settings
box next to Use my location. Then select a location
in Set location.
Read news articles
›
In Idle mode, open the application list and select 1 News
& Weather.
Samsung Apps allows you to simply and easily download
an abundance of applications directly to your device.
Featuring a wealth of games, news, reference, social
networking, navigation, health related applications and
more, Samsung Apps gives you instant access to a huge
choice of mobile experience.
Your device gets smarter with fully optimised applications
from Samsung Apps. Explore amazing applications and
make your mobile life even better.
The feature may be unavailable depending on •
your region or service provider.
For details, please visit www.samsungapps.com.
•
In Idle mode, open the application list and select
1
Samsung Apps.
Search for and download applications as desired.
2
Web
79
Page 80
Market
You can download games, ringtones, or other applications
from the Android Market.
This feature may be unavailable depending on your
region or service provider.
In Idle mode, open the application list and select
1
Market.
Search for a le and download it to the device.
2
Web
80
►p. 33
Page 81
Connectivity
Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over
a distance of about 10 m without requiring a physical
connection.
You do not need to line up the devices to beam
information with Bluetooth. If the devices are within range
of one another, you can exchange information between
them even if they are located in dierent rooms.
Samsung is not responsible for the loss, •
interception, or misuse of data sent or received via
the Bluetooth wireless feature.
Always ensure that you share and receive data
•
with devices that are trusted and properly secured.
If there are obstacles between the devices, the
operating distance may be reduced.
Some devices, especially those that are not
•
tested or approved by Bluetooth SIG, may be
incompatible with your device.
Turn on the Bluetooth wireless feature
›
In Idle mode, open the application list and select
1
Settings → Wireless and networks → Bluetooth
settings.
Select
2
Bluetooth to turn on the Bluetooth wireless
feature.
Connectivity
81
Page 82
Find and pair with other Bluetooth-
›
enabled devices
In Idle mode, open the application list and select
1
Settings → Wireless and networks → Bluetooth
→
settings
Select a device.
2
Enter a PIN for the Bluetooth wireless feature or the
3
other device’s Bluetooth PIN, if it has one, and select
OK. Alternatively, select Accept to match the PIN
between your device and the device.
When the owner of the other device enters the same
PIN or accepts the connection, pairing is complete. If
the pairing is successful, the device will automatically
search for available services.
82
Scan devices.
You do not need to enter a PIN for headsets or
hands-free car kits that have a xed Bluetooth PIN,
such as 0000.
Connectivity
Send data using the Bluetooth wireless
›
feature
Select a le or item, such as a contact, memo, or media
1
le, from an appropriate application or My les.
Press [
2
3
›
] or tap and hold an item →Share, Send via,
or Send namecard via
Search for and pair with a Bluetooth-enabled device.
→
Bluetooth.
Receive data using the Bluetooth
wireless feature
In Idle mode, open the application list and select
1
Settings → Wireless and networks → Bluetooth
→
settings
Your device is visible to other Bluetooth devices for
120 seconds.
Visible.
Page 83
When prompted, enter the PIN for the Bluetooth
2
wireless feature and select OK (if necessary).
Select
3
Accept to conrm that you are willing to receive
data from the device (if necessary).
Received data is saved to the bluetooth folder.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonised frequency and
is intended for use in all European countries. The
WLAN can be operated in the EU without restriction
indoors, but cannot be operated outdoors in France.
Activate the WLAN feature
›
In Idle mode, open the application list and select Settings
→
Wireless and networks →Wi-Fi settings →Wi-Fi.
An active WLAN running in the background will
consume battery power. To preserve battery power,
activate the WLAN only when needed.
Find and connect to a WLAN
›
In Idle mode, open the application list and select
1
Settings→ Wireless and networks → Wi-Fi settings.
The device will automatically search for available
WLANs.
Select a network under
2
Enter a password for the network (if necessary).
3
Select 4 Connect.
Wi-Fi networks.
Connectivity
83
Page 84
Add a WLAN manually
›
In Idle mode, open the application list and select
1
Settings → Wireless and networks → Wi-Fi settings
→
Add Wi-Fi network.
Enter the SSID for the network and select the security
2
type.
Set the security settings depending on the selected
3
security type.
Select
4
Save.
Mobile AP
You can set your device as a wireless access point for PCs
or other devices and share your device’s mobile network
connection through the WLAN feature.
Connectivity
84
Activate the mobile AP feature
›
In Idle mode, open the application list and select
1
Settings → Wireless and networks → Tethering and
portable hotspot
Select
2
3
Mobile AP to activate the mobile AP feature.
Select
Mobile AP settings → Congure mobile AP to
customise the mobile AP feature:
OptionFunction
Network SSID
SecuritySelect the security type.
→
Mobile AP.
View and edit the device name
that will be shown to external
devices.
Page 85
When you are nished, select
4
From another device, locate your device’s name in the
5
available connection list and connect to the network.
Save.
USB tethering
You can set your device as a wireless modem for PCs and
share your device’s mobile network connection via USB.
Using a PC data cable, connect the multifunction jack
1
on your device to a PC.
In Idle mode, open the application list and select
2
Settings → Wireless and networks → Tethering and
portable hotspot.
Select 3 USB tethering to activate the USB tethering
feature.
Your device shares the mobile network connection on
your PC.
To stop sharing the network connection, clear the
check box next to USB tethering.
The sharing method for the network connection
may dier depending on the PC’s operating system.
PC connections
Learn to connect your device to a PC with a PC data cable
in various USB connection modes. By connecting the
device to a PC, you can transfer data to and from your
device directly and use the Samsung Kies program.
Connectivity
85
Page 86
Connect with Samsung Kies
›
Ensure that Samsung Kies is installed on your PC. You can
download the program from the Samsung website
(www.samsungmobile.com).
Using a PC data cable, connect the multifunction jack
1
on your device to a PC.
Samsung Kies will launch automatically.
If Samsung Kies does not automatically launch,
double-click the Samsung Kies icon on your PC.
Copy les from the PC to the device.
2
Refer to the Samsung Kies help for more information.
Connectivity
86
Connect as a mass storage device
›
You can connect your device to a PC as a removable disk
and access the le directory. If you insert a memory card
in the device, you can also access the le directory of the
memory card by using the device as a memory card reader.
The le directory of the memory card will appear
as a removable disk, separate from the internal
memory.
If you want to transfer les from or to a memory card,
1
insert a memory card into the device.
Using a PC data cable, connect the multifunction jack
2
on your device to a PC.
Open the shortcuts panel.
3
Select 4 USB connected →Turn on USB storage → OK.
Page 87
Open the folder to view les.
5
Copy les from the PC to the memory card.
6
When you are nished, select 7 Turn o USB storage.
To disconnect the device from the PC, click the
USB device icon on the Windows task bar and
click the option to safely remove the mass storage
device. Then remove the PC data cable from the PC.
Otherwise, you may lose data stored on the memory
card or damage the memory card.
VPN connections
You can create virtual private networks (VPN) and connect
to your private network securely through a public network,
such as the internet.
Your device should already be congured with
internet access. If you have trouble accessing the
internet, you need to edit connections. If you are not
sure about the connection information to enter, ask
your service provider.
Set up VPN connections
›
In Idle mode, open the application list and select
1
Settings → Wireless and networks → VPN settings
→
Add VPN.
Select a VPN type.
2
Customise the connection information.
3
Available options may vary depending on the VPN
type.
Connectivity
87
Page 88
OptionFunction
VPN nameEnter a name of the VPN server.
Set VPN server
Enable
encryption
Set IPSec
preshared key
Enable L2TP
secret
Set L2TP secretEnter the L2TP secret password.
Set user
certicate
Connectivity
88
Enter the IP address of the VPN
server.
Set to encrypt the VPN server.
Enter a pre-shared key.
Set to use the L2TP secret
password.
Select a user certicate that the
VPN server uses to identify you.
You can import certicates from
the VPN server or download from
the web.
OptionFunction
Select a certicate authority (CA)
Set CA
certicate
DNS search
domains
Connect to a private network
›
In Idle mode, open the application list and select
1
Settings→ Wireless and networks → VPN settings.
Select a private network to connect.
2
Enter the user name and password and select
3
Connect.
certicate that the VPN server
uses to identify you. You can
import certicates from the VPN
server or download from the web.
Enter the domain name server
(DNS) address.
Page 89
Tools
Clock
Learn to use clock display on the Idle screen, and set and
control alarms for important events.
Use the clock display
›
In Idle mode, open the application list and select
1
Clock.
While using the clock display, use the following
2
features:
•.
To create or delete an alarm, select
•.
To access Gallery, select
•.
To launch the music player, select
•.
To return to the idle screen, select
Set a new alarm
›
In Idle mode, open the application list and select
1
Clock.
Press [
2
3
›
When the alarm sounds,
Select
•Dismiss to stop the alarm.
Select
•Snooze to repeat the alarm after a specied
length of time.
] → Add alarm.
Set alarm details.
When you are nished, select 4 Done.
Stop an alarm
Tools
89
Page 90
Calculator
Learn to perform mathematical calculations directly on
your device like a typical hand-held or desktop calculator.
In Idle mode, open the application list and select
1
Calculator.
Use the keys that correspond to the calculator display
2
to perform basic mathematical operations.
Press [
3
] →Advanced panel to use scientic
calculator.
My les
Learn to quickly and easily access all of your images,
videos, music, sound clips, and other types of les stored
on your memory card.
Tools
90
Supported le formats
›
TypeFormat
Imagebmp, gif, jpg, png, wbmp, agif
Video3gp, mp4 (Codec: MPEG4, H.263, H.264)
Musicmp3, ogg, aac.
Some le formats are not supported depending •
on the software of the device.
If the le size exceeds the available memory, an
•
error can occur when you open les.
Open a le
›
In Idle mode, open the application list and select 1 My
les.
Page 91
Select a folder.
2
To move up one level in the le directory, select •Up.
•Home.
To return to the Home directory, select
Select a le to open.
3
In a folder, press [ ] to use the following options:
To send a le to others via multimedia message, email or
•
the Bluetooth wireless feature, select Share.
To create a new folder, select
•Create folder.
To delete les or folders, select
•Delete.
To change the view mode, select
•View by.
To sort les or folders, select
•List by.
To use additional features using a le, such as moving,
•
copying, or renaming option, select More.
Quickoce
Learn to view Word, Excel, PowerPoint, and PDF les on
your memory card.
Open a Quickoce document
›
In Idle mode, open the application list and select
1
Quickoce.
Select a Quickoce program.
2
Select 3 SD Card → a document le.
To create and edit Word, Excel, and PowerPoint les,
create a Quickoce account and purchase a licence.
Tools
91
Page 92
Update Quickoce
›
You can download program updates, new Quickoce
products, or special oers.
In Idle mode, open the application list and select
1
Quickoce.
Select
2
UPDATE.
UIM Toolkit
Use a variety of additional services oered by your service
provider. Depending on your RUIM card, this menu may be
available but labelled dierently.
In Idle mode, open the application list and select UIM Toolkit.
Tools
92
Task manager
With the task manager, you can view currently running
applications, package size of applications, and memory
information, and monitor the RAM memory.
In Idle mode, open the application list and select
1
manager.
Use the following options:
2
Active applications•: View the list of all the
applications currently running on your device.
Package
•: View the package size of applications
installed on your device.
RAM
•: Check and manage the RAM memory for your
device.
Summary
•: View the used and available memory on
your device and memory card.
Help
•: View help information about extending
battery life.
Task
Page 93
Voice Search
Learn to use the voice command feature to dial a number,
send a message, or search for locations and information
by voice.
This feature may be unavailable depending on your
region or service provider.
In Idle mode, open the application list and select
1
Search.
Select
2
3
Speak now.
Say a command into the microphone.
To watch the video tutorial, select Watch a video
from the help screen.
Voice
Tools
93
Page 94
Settings
Access the Settings menu
In Idle mode, open the application list and select
1
Settings.
Select a setting category and select an option.
2
Wireless and networks
Change the settings for wireless network connections.
Flight mode
›
Disable all wireless functions on your device. You can use
only non-network services.
Settings
94
Wi-Fi settings
›
Wi-Fi•: Turn the WLAN feature on or o. ► p. 83
Network notication
•: Set the device to notify you when
an open network is available.
Add Wi-Fi network
•: Add WLAN APs manually.
Bluetooth settings
›
Bluetooth•: Turn the Bluetooth wireless feature on or o.
► p. 81
Device name
•: Set a Bluetooth name for your device.
Visible
•: Set your device to be visible to other Bluetooth
devices.
Scan devices
•: Search for available Bluetooth devices.
Page 95
Tethering and portable hotspot
›
USB tethering•: Activate the USB tethering feature to
share your device’s mobile network connection with PCs
via USB. When connected to a PC, your device is used as
a wireless modem for a PC.
Mobile AP
•: Activate the mobile AP feature to share your
device’s mobile network connection with PCs or other
devices through the WLAN feature.
Mobile AP settings
•: Change the settings to customise
the mobile AP feature.
VPN settings
›
Set up and connect to virtual private networks (VPNs).
► p. 87
Mobile networks
›
Use packet data•: Set to allow packet switched data
networks for network services.
► p. 85
► p. 84
Data roaming•: Set the device to connect another
network when you are roaming or your home network
is not available.
Access
•PointNames: Add access point names (APNs).
You can reset your APN settings to the factory default
values.
Dial
•UpNetworking: Connect to data services using
your dial-up network.
Call settings
Customise the settings for calling features.
All calls
›
Auto reject•: Enable or disable the auto reject feature and
specify a list of callers to automatically reject.
Settings
95
Page 96
•: Set how to answer calls by pressing
Answering call
any key or set the device to answer automatically after a
specied period.
Prex
•dialling: Activate prex dialling and set up prex
dialling numbers.
Reject call with message
•: Select a message to be
sent to a caller when you reject a call and create reject
messages.
Call status tones
•: Activate or deactivate call connect
tone, minute minder tone, or call disconnect tone.
Alerts on call
•: Activate or deactivate alerts during a call.
You may incur additional charges for updating
region information from the server.
Voice call
›
Call forwarding•: Divert incoming calls to another
number.
Call barring
•: Block incoming or outgoing calls.
Settings
96
Call waiting•: Specify options for handling an incoming
call when you are already on a call.
Voice privacy
•: Set whether to encrypt your calls
to prevent your call conversations from being
eavesdropped.
International prex
›
Set prex numbers for international call services and
activate one to use.
Sound
Change the settings for various sounds on your device.
Silent mode
•: Activate the silent mode to mute all
sounds except media sounds and alarm ringtones.
Vibrate
•: Set when the device will vibrate for various
events.
Page 97
Volume
•: Adjust the volume level for call ringtones,
music and videos, alarm ringtones, system sound, and
notication ringtones.
Phone ringtone
•: Select a ringtone to alert you to
incoming calls.
Notication ringtone
•: Select a ringtone to alert you to
events, such as incoming messages and missed calls.
Audible touch tones
•: Set the device to sound when you
touch the keys on the dialling screen.
Audible selection
•: Set the device to sound when you
select an application or option.
Screen lock sounds
•: Set the device to sound when you
lock or unlock the touch screen.
Emergency tone
•: Set how the device alerts to
emergency calls.
Display
Change the settings for the display.
Wallpapers
•
Home screen wallpaper -: Select a background image
for the idle screen.
Lock screen wallpaper
-: Select a background image
for the screen lock.
Font style
•: Change the font type for the display text. You
can download fonts from Android Market by selecting
Get fonts online.
Brightness
•: Set the brightness of the display.
Auto-rotate screen
•: Set whether or not to rotate the
content automatically when the device is rotated.
Animation
•: Set the device to display animation when
you switch between windows.
Screen timeout
•: Set the length of time the device waits
before turning o the display’s backlight.
Settings
97
Page 98
Horizontal calibration
•: Calibrate the geomagnetic
sensor when the compass or augment reality application
shows incorrect information.
Keep the touch screen or keypad facing up during •
calibration.
Calibration may take some time, depending on
•
your location or other circumstances.
Calibration may not be possible in areas with
•
strong magnetic elds. If the calibration fails, move
to another area and try again.
If you enter an area with strong magnetic elds
•
after calibration, your device will automatically
attempt to recalibrate the geomagnetic sensor.
The geomagnetic sensor in your device does
•
not support the bird’s-eye view, which xes the
directions. Therefore, a small error may occur in
measuring angles and cause a map to be turned
upside-down.
Settings
98
Location and security
Change the settings for securing your device and the RUIM
card, and GPS functionality.
Use wireless networks
•: Set to use WLAN and/or mobile
networks for nding your location.
Use GPS satellites
•: Set to use the GPS satellite for
nding your location.
Set screen lock
•: Set the unlock security code. When
you have set your security code, this option changes to
Change screen lock.
None
-: Disable the screen lock.
Pattern
-: Set an unlock pattern to unlock the screen.
PIN
-: Set a PIN (numeric) to unlock the screen.
Password
-: Set a password (alphanumeric) to unlock
the screen.
Page 99
Set RUIM card lock
•:
Lock RUIM Card
-: Activate or deactivate the PIN lock
feature to require the PIN before using the device.
Change RUIM card PIN
-: Change the PIN used to
access RUIM data.
Visible passwords
•: Set the device to display your
password as you enter.
Select device administrators
•: View device
administrators installed on your device. You can activate
device administrators to apply new policies to your
device.
Use secure credentials
•: Use certicates and credentials
to ensure secure use of various applications.
Install from SD card
•: Install encrypted certicates that
are stored on a memory card.
Set password
•: Create and conrm a password for
accessing credentials.
Clear storage
•: Erase the credential contents from the
device and reset the password.
Applications
Change the settings for managing installed applications.
Unknown sources
•: Select to download applications
from any source. If you do not select this option, you can
download applications only from Android Market.
Manage applications
•: Access the list of the applications
installed on the device and check the application
information.
Running services
•: View the services you are using and
access them to manage.
Development
•:
USB debugging
-: This is for application development.
When your device is connected to a PC with a PC data
cable, the USB debugging mode will be activated and
Samsung Kies will launch automatically.
Stay awake
-: Set the device’s screen to stay on while
charging the battery.
Settings
99
Page 100
Allow mock locations
-: Allow mock locations and
service information to be sent to a Location Manager
service for testing. This is for application development.
Samsung Apps
•: Select a network connection (WLAN or
packet switched data network) to get application update
notication from Samsung Apps.
This feature may be unavailable depending on your
region or service provider.
Accounts and sync
Change the settings for the auto sync feature or manage
accounts for synchronisation.
Background data
•: Select this setting to use the auto
sync feature. The auto sync will run in the background
without opening applications and synchronise data.
Auto-sync
•: Set the device to synchronise contact,
calendar, and email data automatically.
Settings
100
Privacy
Change the settings for managing your settings and data.
Back up my data
•: Back up your device’s settings to the
Google server.
Automatic restore
•: Set the device to restore
applications’ data you backed up when they are installed
in your device.
Factory data reset
•: Reset your settings to the factory
default values and delete all your data.
SD card and phone storage
Check memory information of memory cards and your
device, and format a memory card.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.