Samsung SCC-A2033P, SCC-A2333P, SCC-A2333 User Manual

SCC-A2333(P) SCC-A2033P

DIGITAL COLOR CAMERA

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsungsecurity.com

ENG FRE

ENG

GER SPA

ITA

Safety information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL..

This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

WARNING

To prevent damage which may result in ﬁ re or electric shock hazard, do not expose this appliance

•

to rain or moisture.

WARNING

Be sure to use only the standard adapter that is speciﬁ ed in the speciﬁ cation sheet. Using any other adapter could cause ﬁ re, electrical shock, or damage to the product

Incorrectly connecting the power supply or replacing battery may cause explosion, ﬁ re, electric

2. shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

3. abnormal heat generation or ﬁ re.

Securely plug the power cord into the power receptacle. Insecure connection may cause ﬁ re.

When installing the camera, fasten it securely and ﬁ rmly. A falling camera may cause personal

5. injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or containers ﬁ lled

6. with water on top of the camera. Doing so may cause personal injury due to ﬁ re, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause ﬁ re or electric

7. shock.

If any unusual smells or smoke come from the unit, stop using the product. In such case,

8. immediately disconnect the power source and contact the service center. Continued use in such a condition may cause ﬁ re or electric shock.

If this product fails to operate normally, contact the nearest service center. Never disassemble

9. or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modiﬁ cations or attempted repair.)

2 – DIGITAL COLOR CAMERA

Safety information

10.

When cleaning, do not spray water directly onto parts of the product. Doing so may cause ﬁ re or

electric shock.

CAUTION

Do not drop objects on the product or apply strong shock to it. Keep away from a location

1. subject to excessive vibrationor magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (below -

2. 10°C), or high humidity. Doing so may cause ﬁ re or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and then move

3. or reinstall it.

Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may

4. cause ﬁ re or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁ re.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this may

7. damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as

8. vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

ENG

English – 3

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus (including

8. ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

9. with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

10. convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

11.

Use only with cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or

12. sold with the apparatus.

Unplug this apparatus when a card is used. Use caution when moving the cart/

13. apparatus combination to avoid injury from tip-over.

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been

14. damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

4 – DIGITAL COLOR CAMERA

Contents

Introduction

Features 6 PRODUCT & ACCESSORIES 7 Part Names and Functions 8

Installation

Connecting the Auto Iris Lens Connector 11 Mounting the lens 11 Connecting cables and checking operation 12

How to use OSD Menu

Using Icons in the Menu 13 Main Menu 13 Proﬁ le 14 Camera Setup 16 Intelligence 22 Privacy Zone Setup Other Set 25 Communication 26 System Information 26 Language 26

Speciﬁ cations

Speciﬁ cations 28

ENG

English – 5

Introduction

FEATURES

High Resolution

❖

This camera has realized high resolution of 600 lines using the top-notch full digital image processing and

•

special algorithm technologies.

Intelligent Motion Detection & Tracking

❖

•

This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area.

❖

XDR (eXtended Dynamic Range)

Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a

•

certain pixel unit to determine the optimal visibility.

DAY/NIGHT

❖

•

This function can make the IR Cut ﬁ ltering function inactive under the illumination below the normal value.

❖

High Sensitivity

It implements images of high sensitivity using the up-to-date SONY 1/2”Exview-HAD IT CCD..

•

Low Illumination

❖

It uses the digital signal technologies such as low illumination and Day/Night functions that make your camera

•

identify objects even in the worst environment.

Superior Backlight Adjustment

❖

•

When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded object picture quality.

❖

Digital Power Synchronization

The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the

•

operationability and reliability of this camera.

Output Signal Setting

❖

You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy,

•

Horizontal/Vertical proﬁ ling, and digital zooming.

OSD(On Screen Display) Menu

❖

•

OSD menu is provided to display the status of camera and to conﬁ gure the functions interactively.

Coaxial Cable Communication

❖

This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the

•

control signal. In installation or repair, this helps you control the communication controller (optional) without additional cabling.

6 – DIGITAL COLOR CAMERA

PRODUCT & ACCESSORIES

Product & Accessories❖

Main Product

•

Accessories

•

Camera Holder(Mount)

C Mount Adapter

Camera

Introduction

User’s Manual

Lens Connector

ENG

Auto Iris

English – 7

Introduction

PART NAMES AND FUNCTIONS

Side View❖

Mount Adapter Fixing Grooves

Auto Iris Lens Connector

Auto Iris Lens Control Cable

Auto Iris Lens Connector

•

This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed.

Auto Iris Lens Control Cable

•

This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.

Mount Adapter Fixing Grooves

•

These grooves are used when ﬁ xing screws of the mount adapter connected to the bracket when installing the camera on it.

Note :



When the camera lens becomes dirty, softly clean it with a lens tissue or a cloth soaked in pure ethanol.

–

8 – DIGITAL COLOR CAMERA

Camera Lens

Introduction

Rear Panel❖

<AC220V~240V(SCC-A2033P)>

ENG

p q

English – 9

Introduction

n Input/Output Connector

This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals.

No. Function Description

1 ALARM OUT

2 GND Grounding Port.

3 GND Grounding Port.

4 SHUTTER (S0)

5 SHUTTER (S1)

6 SHUTTER (S2)

7 5V OUT

9 RS-485 DATA-

10 RS-485 DATA+

o SETUP Switch

This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears.

(Left/Right)

(Up/Down) :

 : When you press this switch in the menu, the selected function is conﬁ rmed. To enter a submenu, press

this button.

p Power Display LED

When the power is normally connected, the red LED lights.

q Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the Video signals.

r GND

This is a grounding port.

s Power Connection Port

This is connected to the Power cable.

DAY/NIGHT IN

: By pressing this switch left or right, you can move left or right on the menu or change the

displayed value. By pressing this switch up or down, you can move up or down on the menu.

10 – DIGITAL COLOR CAMERA

Alarm out port for motion detection. (Open collector type)

This is a port for selecting an external high speed shutter mode. If connected in LOW (0V), it will become ON inside.

Power supply port for RS-485 JIG. Use within typical DC +5V 100mA This is a port for DAY&NIGHT conversion.

High(DC +3V~+5V) : DAY(COLOR) Mode, Low(0V) : NIGHT(BW) Mode

This is a port for connection to RS-485 DATA- signal line.

This is a port for connection to RS-485 DATA+ signal line.

+ 22 hidden pages