Samsung SC-4137 User Manual [hu]

Operating Instructions

VACUUM CLEANER

❈ Before operating this unit, please read the instructions carefully. ❈ For indoor use only.

DJ68-00341C REV(0.5)

IMPORTANT SAFEGUARDS

1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner.

2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

4. Do not use the vacuum cleaner without a dust bag. Replace the dust bag before it is full in order to maintain the best efficiency.

5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit.

6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not stand on the hose assembly. Do not put a weight on the hose. Do not block the suction or the exhaustion part.

7. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Do not pull on the cord to disconnect the plug from the electrical outlet. Ensure that it is disconnected before attending to the filter.

8. The plug must be removed from the socket out-let before cleaning or maintaining the appliance.

9. The use of an extension cord is not recommended.

10. If your vacuum cleaner is not operating correctly, switch off the power supply

and consult an authorized service agent.

11. If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person in order to avoid a hazard.

12. The vacuum cleaner is provided with a self-resetting thermal cut-out which

automatically shuts off on over-heating. Overheating can be caused by blockage in the filter, nozzle, tube or hose. After removing the cause and allowing the motor to cool, the vacuum cleaner will automatically restart.

Do not use to suck up water.

ASSEMBLING THE CLEANER

OPTION

▲

Features may vary according to model.

▲

For storage, park the floor nozzle.

OPTION

▲

Tool storage

OPERATING YOUR CLEANER

MIN

MAX

2-1 POWER CORD 2-2 ON/OFF SWITCH

NOTE :

When removing the plug from the socket, please take care to grasp the plug, not the cord in order to avoid undue stress.

2-3 POWER CONTROL(VOLUME TYPE ONLY)

MIN = For delicate fabrics, e.g.

net curtains.

MAX = For hard floors and heavily

soiled carpets.

2-4 SUCTION CONTROL

To reduce suction for cleaning draperies, small rugs and other light fabrics, slide the air vent until the hole is open.

2-5 USING THE BLOWER

Located on the left rear side of the cleaner.

1) Disconnect the hose from the body of the cleaner.

2) Connect the hose clamper to the blow hole.

2-6 USING FLOOR TOOLS

OPTION OPTION

Floor Nozzle

OPTION

Detach transparent drum cover for easy cleaning.

OPTION

Blanket brush Bedclothes or Blanket

▲

Features may vary according to model.

OPTION

Dusting

Crevice

Cut off pet hairs or threads

surrounding brush by using scissors.

+ 11 hidden pages