The Samsung Smart Control
: Press this button to mute the sound temporarily.
- Press and hold this button to bring up
Accessibility menus.
Accessibility Shortcuts
: Turns the TV on and off.
source
: Displays and selects the available video
sources.
menu
: Displays the menu on the screen.
;
< P >
guide : Displays the Electronic Programme Guide
(EPG).
(See the e-Manual chapter, "Smart Features >
smart hub.")
: Adjusts the volume.
: Changes the current channel.
smart hub: Launches
that enables or disables
smart hub
applications.
English
< > ¡ £
values seen on the TV's menu.
(Enter): Selects or runs a focused item.
: Returns to the previous menu or channel.
- Press and hold this button to exit the currently
movies or music or viewing pictures.
control button, and other function buttons on the
screen so that you can run functions conveniently.
pointer: Place a finger on the
move the Samsung Smart Control. The pointer on
the screen moves in the direction you moved the
Samsung Smart Control. Press the
select or run a focused item.
: Moves the focus, and changes the
running function on the TV's screen.
: Controls the content when you are playing
: Displays the numeric buttons, the content
pointer
button and
pointer
button to
English - 9
Installing batteries into the Samsung Smart Control
To use the Samsung Smart Control, push the rear
cover open in the direction of the arrow and insert
the batteries as shown in the figure. Make sure
that the positive and negative ends are facing the
correct direction.
- Alkaline batteries are recommended for longer
battery life.
Pairing the TV to the Samsung Smart Control
If your Samsung Smart Control is not paired to your TV, press
and hold the buttons labelled ① and ② simultaneously for 3
seconds or more to pair the Samsung Smart Control to the TV.
- The Samsung Smar t Control can only be paired to one T V
at a time.
English - 10
Version 1.0
Samsung Electronics
FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
page 3 of 4
Version 1.0
Samsung Electronics
page 4 of 4
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
IMPORTANT
NOTE:
IC Radiation Exposure Statement
This device is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS102 and has been tested in accordance with the measurement methods and procedures specified in
IEEE 1528.
The device and its antenna must not be co-located or operated in co njunction with any other antenna
or transmitter.
Loading...