Samsung RF26XAEPN, RF267AERS, RF26XAERS, RF267AEBP, RF267AEWP User Manual

...

REFRIGERATOR

MODEL NAME :RF267AE**

RF26XAE**

MODEL CODE :RF267AERS/XAA

RF267AEPN/XAA RF267AEBP/XAA RF267AEWP/XAA RF26XAERS/XAA RF26XAEPN/XAA

REFRIGERATOR CONTENTS

1. PRECAUTIONS(SAFETY WARNINGS)··4

2. PRODUCT SPECIFICATIONS

3. DISASSEMBLY AND REASSEMBLY

4. TROUBLESHOOTING

5 . EXPLODED VIEW & PARTS LIST

6. PCB DIAGRAM

······································

7. WIRING DIAGRAM

8. SCHEMATIC DIAGRAM

······························

································

························

················

····

········

105

111

113

For the latest parts information, Please access to our service web site (●North America : http://service.samsungportal.com)

WARNING

IMPORTANT SAFETY NOTICE

The service guide is for service men with adequate backgrounds of electrical, electronic, and technician experience. Any attempt to repair a major appliance may result in personal injury and property damage. The manufacturer or dealer cannot be responsible for the interpretation of this information.

SAMSUNG ELECTRONICS AMERICA, INC.

Technical Service Guide

Contents

1. PRECAUTIONS(SAFETY WARNINGS) ··············································4

2. PRODUCT SPECIFICATIONS ····················································8 2-1) INTRODUCTION OF MAIN FUNCTION 2-2) SPECIFICATIONS ························································10 2-3) INTERIOR VIEWS (RF267) 2-3) INTERIOR VIEWS (RF26V)

··················································11

··················································12

2-4) MODEL SPECIFICATION &SPECIFICATION CHART ·································13 2-5) DIMENSIONS OF REFRIGERATOR ············································16 2-6) OPTIONAL MATERIAL SPECIFICATION ·········································17 2-8) REFRIGERANT ROUTE IN REFRIGERATION CYCLE 2-9) COOLING AIR CIRCULATION

················································19

3. DISASSEMBLY AND REASSEMBLY ···············································20 3-1) PRECAUTION ··························································21 3-2) REFRIGERATOR DOOR 3-3) DOOR HANDLE

·························································24

···················································22

3-4) REFRIGERATOR LIGHT ····················································25 3-5) COVER-DISPLAY & WATER-DISPENSER ········································25 3-6) WATER-DISPENSER ······················································26 3-7) GLASS SHELF 3-8) FOLDABLE GLASS SHELF

··························································27

·················································· 28

3-9) VEGETABLE & FRUIT DRAWERS SHELF ········································28 3-10) COOL SELECT PANTRY ··················································29 3-11) WATER TANK ·························································30 3-12) MOTOR DAMPER ······················································· 32 3-13) WATER FILTER (DISASSEMBLY) ·············································32 3-14) WATER FILTER (REASSEMBLY) ·············································33 3-15) GALLON DOOR BIN ·····················································33 3-16) VERTICAL HINGED SECTION ···············································34 3-17) EVAPORATOR COVER IN REFRIGERATOR ······································35 3-18) EVAPORATOR IN REFRIGERATOR ···········································36 3-19) FREEZER DOOR 3-20) PULL OUT DRAWER

························································37

·····················································38

3-21) ICE-MAKER ···························································39 3-22) FREEZER LIGHT ·······················································40 3-23) DOOR SWITCH IN FREEZER ················································40 3-24) EVAPORATOR COVER IN FREEZER ···········································41 3-25) EVAPORATOR IN FREEZER ················································41 3-26) MACHINE COMPARTMENT ·················································42 3-27) ELECTRIC BOX

························································45

···········································9

·································18

4. TROUBLESHOOTING

························································46

4-1) FUNCTION FOR FAILURE DIAGNOSIS ··········································47

4-1-1. TEST MODE (MANUAL OPERATION / MANUAL DEFROST FUNCTION) ··················47 4-1-2. DISPLAY FUNCTION OF COMMUNICATION ERROR ······························48 4-1-3. SELF-DIAGNOSTIC FUNCTION ···········································49 4-1-4. DISPLAY FUNCTION OF LOAD CONDITION 4-1-5. EXHIBITION MODE SETTING FUNCTION

···································52

·····································53

4-1-6. OPTION SETTING FUNCTION ············································53 4-1-7. OPTION TABLE ······················································56

Contents

4-2) DIAGNOSTIC METHOD ACCORDING TO THE TROUBLE SYMPTOM(FLOW CHART) ············57

4-2-1. IF THE TROUBLE IS DETECTED BY SELF-DIAGNOSIS 4-2-2. IF FAN DOES NOT OPERATE(F, R, C - FAN) ···································68 4-2-3. IF ICE ROOM FAN DOES NOT OPERATE ·····································69 4-2-4. IF ICE MAKER DOES NOT OPERATE ········································70 4-2-5. IF DEFROST DOES NOT OPERATE (F,R DEF HEATER) 4-2-6. IF POWER IS NOT SUPPLIED

············································72

4-2-7. IF COMPRESSOR DOES NOT OPERATE ·····································73 4-2-8. WHEN ALARM SOUND CONTINUOUS WITHOUT STOP(RELATED WITH BUZZER SOUND) ····74 4-2-9. IF PANEL PCB DOES NOT WORK NORMALLY ··································76 4-2-10. IF PANTRY PANEL PCB IS NOT WORKING NORMALLY ···························77 4-2-11. WHEN REFRIGERATOR ROOM LAMP DOES NOT LIGHT UP ·······················78 4-2-12. IF ICE WATER IS NOT SUPPLIED ·········································79 4-2-13. IF WATER IS NOT SUPPLIED ············································80 4-2-14. IF CUBED OR CRUSHED ICE IS NOT SUPPLIED ·······························81 4-2-15. IF COVER ICE ROUTE MOOR(GEARD MOTOR) IS NOT WORKING NORMALLY

····························58

···························71

···········82

5 . EXPLODED VIEW & PARTS LIST

················································83

5-1) FREEZER ·····························································84 5-2) REFRIGERATOR ························································87 5-3) CABINET ·····························································93 5-4) DISASSEMBLY OF FREEZE DOOR ············································97 5-5) DISASSEMBLY OF REFRIGERATOR DOOR LEFT ·································100 5-6) DISASSEMBLY OF REFRIGERATOR DOOR RIGHT ·································103

6. PCB DIAGRAM ···························································105 6-1) PCB LAYOUT WITH PART POSITION ··········································106 6-2) PCB LAYOUT WITH PART POSITION (INVERTER BOARD)·····························107 6-3) CONNECTOR LAYOUT WITH PART POSITION (MAIN BOARD) ·························108 6-4) PCB LAYOUT WITH PART POSITION (MAIN BOARD) ································109 6-5) CONNECTOR LAYOUT WITH PART POSITION (INVERTER BOARD) ······················110

7. WIRING DIAGRAM ·························································111 7-1) MODEL : RF267AD·······················································111 7-2) MODEL : RF26VAD

8. SCHEMATIC DIAGRAM

······················································112

······················································113

8-1) WHOLE BLOCK DIAGRAM ·················································113

8-1-1. MODEL : RF267AD ···················································113 8-1-2. MODEL : RF26VAD ···················································114 8-1-3. INVERTER BOARD

···················································115

8-2) CIRCUIT DIAGRAM ······················································111

8-2-1. MODEL : RF267AD / RF26VAD

···········································116

8-2-2. INVERTER BOARD ···················································117

1. PRECAUTIONS(SAFETY WARNINGS)

●

Before servicing the refrigerator or replacing parts, unplug the unit from the wall outlet.

→

Shock Hazard, observe basic safety rules.

●

Be sure to use the specified generic parts when servicing the product.

→

Confirm the Model Number on Product itself. Inspect the mew part and assembly for Voltage, Current and temperature specifications.

●

During the Diagnostic and Troubleshooting phase it is recommended to do a

visual inspection of all the connections of the wiring harness to the PCB ASSY.

●

Check the traces of water infiltration at the electric parts.

→

If there is a trace of water infiltration it is necessary for you to replace the

insulation tape or harness.

●

Check the assemble status of parts after troubleshooting.

→

It should be done indiscriminately as before the repair.

●

Check the use circumstance of refrigerator.

→

If the refrigerator is installed at the place that is damp or wet, or status of installation is unstable, change the installation place.

●

Do earth in case of need.

→

Particularly, Be sure to earth when there is a risk of an electric leakage by humidity or wetness.

●

Do not use multi plugs in a plug socket at the same time. Check if the power cord and socket is damaged, pressed, squeezed, or fired.

→

If the plug or plug socket is damaged, repair or exchange that

immediately.

●

Do not allow consumers to repair the appliance by themselves.

●

Do not store other materials except the foods.

→

Drugs or scientific materials : difficult to keep precise temperature.

→

The inflammables(alcohol, benzene, ether, LP gas, butane gas etc.):

have risk of explosion.

PRECAUTIONS(SAFETY WARNINGS)

Read all instructions before repairing the product and follow the instructions in order to prevent danger or property damage.

CAUTION/WARNING SYMBOLS DISPLAYED

Indicates that a

Warning

danger of death or serious injury exists.

Indicates that a risk

Caution

of personal injury or material damage exists.

Warning & Caution

Pull the power plug out to exchange the interior lamp of the refrigerator.

●

It may cause electric shock.

Use the rated components on the replacement.

●

Check the correct model, rated voltage, rated current, operating temperature and so on.

SYMBOLS

means “Prohibited”.

means “Do not disassemble”.

means “No contact”.

means ”Warning or Caution”.

means “Unplug the unit before preforming service”

means “Earth or Ground”.

On repair, make sure that the wires such as harness are bundled tightly.

●

Bundle tightly wires in order not to be detached by the external force and then not to be wetted.

Unplug

On repair, remove completely dust or other things of housing parts, harness parts, and check parts.

●

Cleaning may prevent the possible fire by

tracking or short.

Rated

components

After repair, check the assembled state of components.

●

It must be in the same assembled state when compared with the state before disassembly.

Check if there is any trace indicating the permeation of water.

●

If there is that kind of trace, change

the related components or do the

necessary treatment such as taping using the insulating tape.

PRECAUTIONS(SAFETY WARNINGS)

❈

Please let users know following warnings & cautions in detail.

Warning & Caution

Do not allow users to put bottles or kinds of glass in the freezer.

●

Freezing of the contents may inflict a wound.

Do not allow users to insert the power plugs for many products at the same time.

●

May cause abnormal generation of

heat or fire.

Do not allow users to store narrow and lengthy bottles or foods in a small multi-purpose room.

●

It may hurt you when refrigerator door is opened and closed resulting in falling stuff down.

Do not allow users to disassemble, repair or alter.

●

It may cause fire or abnormal

operation which leads to injury.

Do not allow users to store pharmaceutical products, scientific materials, etc., in the refrigerator.

●

The products which temperature control should not be stored in the refrigerator.

Do not allow users to bend the power cord with excessive force or do not have the power cord pressed by heavy article.

●

May cause fire.

Prohibition

Do not allow users to store articles on the product.

●

Opening or closing the door may cause things to fall down, which may cause injury.

Prohibition

Do not

disassemble

Do not allow users to install the refrigerator in the wet place or the place where water splashes.

●

Deterioration of insulation of electric

parts may cause electric shock or fire.

Make sure of the earth.

●

Be sure the product is properly grounded.

Earth

PRECAUTIONS(SAFETY WARNINGS)

FLOORING

For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 660lbs(299kg).

MOVING

Protect the finish of the flooring. Cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving, be sure to pull the unit straight out and push back in straight.

2. PRODUCT SPECIFICATIONS

2-1) INTRODUCTION OF MAIN FUNCTION ·······································9

2-2) SPECIFICATIONS ···················································10

2-3) INTERIOR VIEWS ···················································11

2-4) MODEL SPECIFICATION ···············································12

2-5) MODEL SPECIFICATION &SPECIFICATION CHART ·····························13

2-6)DIMENSIONS OF REFRIGERATOR (INCHES) ··································16

2-7) OPTIONAL MATERIAL SPECIFICATION ·····································17

2-8) REFRIGERANT ROUTE IN REFRIGERATION CYCLE ····························18

2-9) COOLING AIR CIRCULATION ············································19

2. PRODUCT SPECIFICATIONS

2-1) Introduction of main function

●●

A newly Developed SAMSUNG bottom mount freezer in 2009 has the following characteristics.

Surround Multi Flow

●●

Uniform cooling for each shelf and even in corner in fresh food compartment by centerpositioned fan and duct with multiple flow effluences

Twin Cooling System

●●

The refrigerator and the freezer have two evaporators. Given this independent system, the freezer and the refrigerator are cooled individually as required and are, therefore, more efficient. Food odor from the refrigerator does not affect food in the freezer due to separate air flow circulation.

Electronic control from outside of Pantry Cover

●●

Adjustable temperature control ((around 41℉(5℃) : Deli / around 38℉(3℃) : Fresh / around 34℉(1℃) Chilled ) Temperature control from outside of the Pantry : user friendly design helps keep foods fresh for longer

16" Pizza Corner

●●

Can be used for 16" pizza if stand flip tilting pocket.

Ice and Water Dispenser

●●

The ice and water dispenser provides ice and cold water at any time.

Secure Auto Close Door System

●●

Secure Auto Close Door System

●●

Cool tight doors

●●

Energy saving

●●

Preventing sweat on fridge doors

Easy Handle System

●●

Ez-open Freezer Door

●●

Ergonomic Door Design

PRODUCT SPECIFICATIONS

Fan

(Air inlet)

Heat exchanger

Fan

(Air inlet)(Air inlet)

Heat exchanger

FanFanFan

(Air inlet)(Air inlet)(Air inlet)

Heat exchanger

2-2) Specifications

ELECTRICAL SPECIFICATIONS

Defrost Control From 24 to 32 hrs Thermo Bimetal Protector 140°F(60℃)(off) 104°F(40℃)(on) Defrost Thermistor(502AT) 50°F(10℃)(off) Electrical Rating AC115V 60Hz 11.6 Amps Maximum Current Leakage 0.25 mA

(Air inlet)

Maximum Ground Path Resistance 0.1 Ohm Energy Consumption 540KWh/year

NO LOAD PERFORMANCE

Ambient Temperature 70℉(21℃) 90℉(32℃) Refrigerator,℉ 34℉(1℃)∼46℉(8℃) 34℉(1℃)∼46℉(8℃) Freezer,℉ -14℉(-26℃)∼8℉(-13℃) -14℉(-26℃)∼8℉(-13℃) Run Time,% 󳠞40 󳠞60

REFRIGERATION SYSTEM

Refrigerant Charge (R134a) 5.64 oz(160g) Compressor(BK190CL2C/E02) 897 Btu/hr(0.263kw) Compressor oil Freol α-10

＂＂

Capillary tube(Dia, Length) 0.032

＂＂((00..8811mmmm,, 22999977mmmm))

,118

Dryer Molecular Sieve XH-9

Refrigerator

Fan

Heat exchanger

Freezer

(Air inlet)

(Air inlet)(Air inlet)

Fan

C-Fan Noise FilterDryer

Compressor

INSTALLATION

Clearance must be provided for air circulation AT TOP 2" AT SIDES 3 AT REAR 2"

condenser Water Valve

((5500mmmm))

3/4

"(95mm)

((5500mmmm))

PRODUCT SPECIFICATIONS

Auto Door Closer

Water Filter

Dairy Compartment

Door Bins

Cool Select Pantry

Light

Vertical Hinged

Section

Vegetable & Fruit

Drawers

Tilting Pocket

Light

Pull Out Drawer

Freezer Drawer Bin

Slide-Shelf

Quick-Space

Glass Shelf

Ice-Maker

Foldable-Shelf

Slide-Shelf

2-3) Interior Views (RF267)

Refrigerator

Freezer

PRODUCT SPECIFICATIONS

2-3) Interior Views (RF26X)

PRODUCT SPECIFICATIONS

2-4) Model Specification &Specification Chart

External size

Net

Capacity

Weight

Packing

ModelITEM

W/O Hinge Cap

With Hinge Cap

Total

Freezer

Refrigerator

Efficiency of volume

Set

Packing

Width Depth

Height

Compressor

RF267 / RF26X

35 3/4 inch (908mm)

29 1/8 inch (740mm) 35 5/8 inch (905mm)

5/8 inch (1744mm)

70 Inch (1778mm)

26 Cu.ft (733.4ℓ)

8.2 Cu.ft(232.2ℓ)

17.7 Cu.ft(501.2ℓ)

50.17% 330 Pounds (150kg) 363 Pounds (165kg)

5/8 Inch (980mm)

39 13/32 Inch (1001mm)

75 3/4 Inch (1923mm)

reciprocate

Rated Frequency and Frequency

Refrigerant

Foaming agent

Refrigerant Input Amount

Kind of Refrigerator

Motor Rated Consumption Power

Electric Heater Rated Consumption Power

AC 115V/60Hz

R 134a

C-Pantane

5.64 oz (160g)

Indirect Cooling Method Refrigerator

155A

380W

PRODUCT SPECIFICATIONS

Items

Model

Compressor

Evaporator

Condenser

Dryer

Components for FreezerDefrost Related Components

FreezerRefrigerator

Capillary tube(Dia x Length)

Refrigerant

Model

THERMISTOR

(F-SENSOR)

502AT

Model

THERMISTOR

Model

Starting type

Oil Charge

Freezer

Refrigerator

Temperature Selection

-8℉(-22℃)

-2℉(-19℃) 8℉(-13℃)

Temperature Selection

34℉(1℃)

Specification

RF267 / RF26X

BK190CL2C/E02

R.S.C.R

FREOL α- 10 SPLIT FIN TYPE SPLIT FIN TYPE

Forced and natural convection type

Molecular sieve XH-9

0.032” x 118” (0.81mm x 2997mm) R134a

ON(℉)

-2℉(-19℃) 1℉(-17℃)

11℉(-12℃)

ON(℉)

36℉(2℃)

OFF(℉)

-13℉(-25℃)

-5℉(-21℃) 5℉(-15℃)

OFF(℉)

32℉(0℃)

(R-SENSOR)

Room Temperature Sensor Components

Defrost Cycle

Defrost SensorBimetal

502AT

First Defrost Cycle (Concurrent defrost of F and R)

Defrost Cycle(FRE) Defrost Cycle(REF)

Pause time

F Defrost-Sensor

R Defrost-Sensor

F Bimetal-thermo

Protector

R Bimetal-thermo

Protector

38℉(3℃) 46℉(8℃)

Model SPEC Model SPEC Rated

Operating temperature

Rated

Operating temperature

40℉(4℃) 48℉(9℃)

11hr ±10min

11~22hr(vary according to the conditions used)

6~11hr(vary according to the conditions used)

12 ±1min

THERMISTOR (502AT)

5.0 ㏀ at 77℉(25℃)

THERMISTOR (502AT)

5.0 ㏀ at 77℉(25℃) AC 125V 10A

Off : 140℉(60℃) / On : 104℉(40℃)

AC 125V 10A

Off : 140℉(60℃) / On : 104℉(40℃)

36℉(2℃) 44℉(7℃)

PRODUCT SPECIFICATIONS

Items

Model

Defrost Heater(FRE) Defrost Heater(REF) DISPENSER Heater

FRENCH Heater ICE Duct Heater

Water Tank Heater

Bimetal thermo For Preventing Overheating of Refrigerator Lamp

Over load Relay

Rated Voltage

MOTOR-BLDC(FRE)

MOTOR BLDC(ICE ROOM)

Electric Components

MOTOR-BLDC(REF)

MOTOR-BLDC(CIRCUIT)

MOTOR-DAMPER(PANTRY)

Lamp(FRE) Lamp(REF)

Conducting af F Defrost Conducting at R Defrost

Interlock with French Heater

Interlock with Defrost Heater (FRE)

Model

Temp.ON

Temp.OFF

FRE

Specification

RF267 / RF26X

AC 115V, 240W

AC115V, 120W

AC115V, 2W AC115V, 8W AC115V, 4W

DC 12V, 2W

AC125V 10A / 140℉(60℃) / On : 104℉(40℃)

4TM445PHBYY-82 257℉±9℉ (125℃±5℃) 156℉±16℉ (69℃±9℃)

AC 115V/ 60Hz DC12V / DREP5020LC DC12V / DREP5020LB DC12V / DREP5020LC

DC 12V / DRCP5030LA

DC12V / NSBY001TA1

AC 120V / 60W(1EA) AC 120V / 60W(2EA)

AC 125V 1.5A (1EA)

Door Switch

REF(ICE ROOM)

Power cord

Earth Screw

REF

DC200V 1.5A / MS-406-SS-01(2EA)

125~250V /11A, EMB606

AC125V 15A

BSBN (BRASS SCREW)

PRODUCT SPECIFICATIONS

3/32

"(739mm)

3 3/8"(86mm)

5/8

"(549mm)

11/16

"(1059mm)

19/32"(15mm)

70"(1778mm)

1.3"(34mm)

1/5"(5mm)

29/32

"(836mm)

5/8"(905mm)

3/4

"(908mm)

9/32

"(617mm)

3/8

"(86mm)

1/2

"(1384mm)

11/16

"(475mm)

25/32

"(1214mm)

2-6)Dimensions of Refrigerator

PRODUCT SPECIFICATIONS

2-7) Optional Material Specification

Part Name

FILTER

WATER-ASSY

ASSY-PACKING

SUB

LAMP INCANDENT

Part Code AMOUNT

DA29-00003B

DA99-00240S

4713-001223

PRODUCT SPECIFICATIONS

2-8) Refrigerant Route in Refrigeration cycle

Compressor → condenser → Hot Pipe → Dryer → Capillary Tube → Refrigerator Evaporator → Freezer Evaporator→ Suction Pipe → Compressor

Refrigerator Evaporator

Hot Pipe

Capillary Tube

Freezer Evaporator

Compressor

Suction Pipe

Accumulator

Muffler

Condenser

PRODUCT SPECIFICATIONS

2-9) Cooling Air Circulation

Refrigerator

Freezer

3. DISASSEMBLY AND REASSEMBLY

3-1) PRECAUTION ·····································21

3-2) REFRIGERATOR DOOR ································22

3-3) DOOR HANDLE ····································24

3-4) REFRIGERATOR LIGHT ·································25

3-5) COVER-DISPLAY & WATER-DISPENSER ·························25

3-6) WATER-DISPENSER ··································26

3-7) GLASS SHELF ·····································27

3-8) FOLDABLE GLASS SHELF ······························· 28

3-9) VEGETABLE & FRUIT DRAWERS SHELF ·························28

3-10) COOL SELECT PANTRY ································29

3-11) WATER TANK ·····································30

3-12) MOTOR DAMPER ··································· 32

3-13) WATER FILTER (DISASSEMBLY) ····························32

3-14) WATER FILTER (REASSEMBLY) ····························33

3-15) GALLON DOOR BIN ··································33

3-16) VERTICAL HINGED SECTION ······························34

3-17) EVAPORATOR COVER IN REFRIGERATOR ·······················35

3-18) EVAPORATOR IN REFRIGERATOR ···························36

3-19) FREEZER DOOR ···································37

3-20) PULL OUT DRAWER ··································38

3-21) ICE-MAKER ······································39

3-22) FREEZER LIGHT ···································40

3-23) DOOR SWITCH IN FREEZER ······························40

3-24) EVAPORATOR COVER IN FREEZER ··························41

3-25) EVAPORATOR IN FREEZER ······························41

3-26) MACHINE COMPARTMENT ·······························42

3-27) ELECTRIC BOX ····································45

ASSEMBLY & DISASSEMBLY

3-1) PRECAUTION

• Unplug the refrigerator before cleaning and making repairs.

• Remove any foreign matter or dust from the power plug pins.

- Otherwise there is a risk of fire.

• Do not use a cord that shows cracks or abrasion damage along its length or at either end.

• Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical which has a voltage rating that matched the rating plate.

- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

• Do not install the refrigerator in a damp place or place where it may come in contact with water.

- Deteriorated insulation of electrical parts may cause an electric shock or fire.

• The refrigerator must be grounded.

- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the refrigerator.

• Do not put bottles or glass containers in the freezer.

- When the contents freeze, the glass may break and cause personal injury.

• Do not store volatile or flammable substances in the refrigerator.

- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.

- NEED TOOL

IMAGE ITEM USE

Phillips Head Driver

Flat Head Driver

Hex Wrench Ø5mm

Socket Wrench Ø10mm

Use for assembling and

disassembling of screw

Use for assembling and disassembling

of HomeBar, Dispenser, Deli

Cartessen Box, Main PBA etc...

Use for assembling and

disassembling of Middle Hinge

Use for assembling and

disassembling of Door Hinge

DISASSEMBLY AND REASSEMBLY

3-2) Refrigerator Door

Part Name How To Do Descriptive Picture

1. With the door opened, remove the Top Table cap(󱀊) with a Flat head screwdriver, and close the door.

2. Remove the 3 screw holding down the Top Table and remove the Top Table(󱀋).

󱀊

󱀋

Refrigerator

Door

3. Disconnect a earth wire(󱀌), electronic connector(󱀍) and a water(󱀎)coupling . The blue and red clips are not on the coupling at first, but must be put at installation(󱀏). Remove the 3 hex head bolts on the upper hinge with 10mm wrench.

4. Remove the 3 hex head bolts(󱀐)

found attatched to the upper left and right door hinges with a Wrench(10mm). With a Philips head screwdriver, remove the ground screw(󱀑) found attatched to the upper left and right door hinges. Remove the upper left and right door hinges(󱀒).

󱀍󱀌

󱀎

󱀏

DISASSEMBLY AND REASSEMBLY

Part Name How To Do Descriptive Picture

5. Lift the door straight up to remove.

Refrigerator

Door

󱀕

6.Remove 2 hex head bolts( 󱀐 )

with 5mm Allen Wrench(3/16") and an screw( 󱀑 ) with Philips screwdriver.

󱀓

󱀔

DISASSEMBLY AND REASSEMBLY

3-3) Door Handle

Part Name How To Do Descriptive Picture

1. Remove the Cap Door with a flat-blade(-) screwdriver.

Door Handle

Freezer

2. Remove 4 screws

3. Lift up the handle to have the Slider Handle Fre(󱀊) pushed back.

4. After having the Slider Handle Fre(󱀊) pushed back, screw up at the hole.

󱀊

5. Remove the door handle by lifting it up.

DISASSEMBLY AND REASSEMBLY

3-4) Refrigerator Light

Part Name How To Do Descriptive Picture

1. Remove the lamp cover by pulling it down as pushing the rear of lamp cover.

Refrigerator

Light

2. Remove the screw. And separate the LED panel.

3-5) Cover-display & water-dispenser

Part Name How To Do Descriptive Picture

1. Insert a flat-blade screwdriver on the slot as shown in the picture, and unlock the tabs.

2. Remove the display cover by

Cover-display

pushing it to the right side and pulling it up.

①

②

3. Disengage the housing connect of display cover

DISASSEMBLY AND REASSEMBLY

Part Name How To Do Descriptive Picture

4. Remove 4 screws of cover-

Cover-display

3-6) Water-dispenser

Part Name How To Do Descriptive Picture

display

1. Disengage the 3 Housing Connect.

Water-dispenser

2. Remove 2 screws of the CaseIce,Route Assy.

3. Pull the Case-Ice,Route Assy.

4. Push the hook and remove the Micro Switch.

DISASSEMBLY AND REASSEMBLY

Part Name How To Do Descriptive Picture

1. Assembly shall be the contrary order from the disassemble. Case-Ice and Route shall be assembled inside of hose. Otherwise, assemble cannot be accomplished.

Water-dispenser

2. When assembling CoverDisplay, first insert it from leftside and then assemble to rightside. Otherwise, the tab can be broken.

3-7) Glass Shelf

Part Name How To Do Descriptive Picture

Remove the shelf by lifting the

Glass Shelf

front plane of the shelf up and pulling it out.

DISASSEMBLY AND REASSEMBLY

3-8) Foldable Glass Shelf

Part Name How To Do Descriptive Picture

Foldable Glass

Shelf

3-9) Vegetable & Fruit Drawers Shelf

Part Name How To Do Descriptive Picture

Vegetable & Fruit

Remove 2 screws of the Fold Glass Shelf

1. Remove the vegetable & fruit drawer by pulling the roller part and lifting it up.

Drawers Shelf

2. Remove the vegetable & fruit drawers shelf by pulling it out. (Refer to the picture)

DISASSEMBLY AND REASSEMBLY

3-10) Cool Select Pantry

Part Name How To Do Descriptive Picture

1. Remove the cool select pantry

Cool Select Pantry

Cover

by pulling the roller part and lifting it up.

1. Remove the cool select pantry cover by lifting the central part of the cover while pushing it to the left.

Cool Select Pantry

Shelf

Cool Select Pantry

Rail

1. Remove the cool select pantry shelf by lifting the front part of the shelf while pulling it.

1. Remove the cool select pantry rail by unscrewing the 3 screw parts and pulling the rail.

2. Disconnect the housing connector from the internal rail part. (Refer to the picture)

+ 88 hidden pages