SAMSUNG RF267ABRS User Manual
Refrigerator
user manual
imagine the possibilities
Thank you for purchasing your Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
RF267
DA68-01812G.indb 1 2009.8.10 9:7:33 AM
English
Français
Features of your new Refrigerator
KEY FEATURES OF YOUR NEW REFRIGERATOR
Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-efficient
features.
Twin Cooling System
The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system,
the Freezer and Refrigerator cool more efficiently.
Additionally, this separate air flow system prevents food odor of one compartment from seeping into
other compartments.
Cool Select Pantry
TM
The Cool Select pantryTM is a full-width drawer with adjustable temperature control.
Bigger & Wider Space
The wide shelf area and pantry provide enough space for larger items like a pizza box, etc.
The wide freezer drawer also provides enough space for 2~3 turkeys.
Secure Auto Close
The Secure Auto Close feature will automatically close a door that is slightly open.
Compact Ice Maker
The Ice maker can dispense cubed or crushed ice.
Digital Display and Temperature Control
A helpful beeper alerts you if door is ajar.
Tilting Pocket
The Tilting pocket can be used to store up to a 16” pizza.
Auto Pull Out Drawer
The upper drawer in the freezer comes out automatically as you just open the freezer door.
Easy Handle
Freezer door can be opened with less eort.
Energy Star
Energy star labeled this product could save your energy costs.
For easy future reference, write the model and
serial number down which can be found on the left
side of the refrigerator.
Model #
Serial #
2_ Features
Safety Information
SAFETY INFORMATION
Before using your new Samsung French Door Refrigerator, please read this manual thoroughly to
ensure that you know how to safely and efficiently operate the features and functions that your
new appliance oers.
Because the following instruction covers various models, the characteristics of your Refrigerator
may dier slightly from the Refrigerator described in this manual. If you have any question, contact
us at 1-800-SAMSUNG or find help and information online at www.samsung.com.
What the icons and signs in this user manual mean :
WARNING
Hazards or unsafe practices that may result in .
CAUTION
Hazards or unsafe practices that may result in
.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when using your
refrigerator, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
SEVERE WARNING SIGNS
Do not plug several appliances into the same power receptacle.
Large appliances draw a lot of power. Powering more than one appliance or machine from a single power source
could cause overheating and cause a fire.
Make sure that the power plug is not kinked or damaged by the back of the Refrigerator.
Do not spray water directly into or on the outside of the Refrigerator/Freezer drawer.
Do not use aerosols near the Refrigerator.
Safety Information _3
Do not put undue stress on the power cord or place heavy articles on it.
Placing heavy articles on the power cord create the risk of explosion or fire.
Do not insert the power plug with wet hands.
It may cause electric shock.
Do not put a container filled with water on the Refrigerator.
If it spills, it may cause fire or electric shock.
Do not install the Refrigerator in a damp place or water closed places.
Wet and/or deteriorated insulation of the internal electrical parts may cause electric shock or fire.
Do not store volatile or flammable substances in the Refrigerator.
Storing benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.
Do not disassemble or repair the Refrigerator by yourself.
You run the risk of fire, appliance malfunctions and/or personal injury. Call your nearest service center for
help from a qualified service technician.
Unplug the Refrigerator before changing the interior light.
Changing the light while the Refrigerator is plugged in may cause electric shock.
If you wish to dispose of the Refrigerator, remove the doors and seals before throwing
it away.
.rotaregirfeRehtotnibmilcyehtfidlihcapartnenac)slaesriehtdna(sroodehT
Make sure that the doors are o, and ensure that no one is suocated by being locked inside.
The Refrigerator must be safely grounded
Always make sure that you have grounded the Refrigerator before attempting to investigate or repair any
part of the appliance. Power leakages can cause severe electric shock.
Never use gas pipes, telephone lines or other potential lightning attractors as an
electrical ground.
Improper use of the grounding plug can result in a risk of electric shock. If it is necessary to use an
extension cord to power the Refrigerator, use only a 3-wire extension cord that has a 3-blade ground
plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extention
cord should be AC 115V~120V, 10A, or more. Additionally, if a grounding adapter is used, make sure the
receptacle box is also fully grounded.
Safety Information
4_ Safety Information
CAUTION SIGNS
Use good judgment when filling the Refrigerator with food and drinks.
ŘIn an overfull Refrigerator, heavy, fragile, bulky or breakable items may fall out and cause personal injury
and/or damage to surrounding objects.
Do not put bottles or glass containers in the Freezer drawer.
ŘWhen the contents freeze and then expand, the glass may break and cause personal injury or leave
dangerous glass shards in the Freezer.
If the electrical wall socket is loose, do not insert the power plug.
ŘThere is a risk of electric shock or fire. Have the plug looked at by a licensed electrician.
Never unplug your Refrigerator by pulling on the power cord.
ŘAlways grip the power cord firmly and pull straight out from the outlet. Yanking or pulling on the power
cord may cause a short-circuit, fire and/or electric shock.
ŘA damaged power cord must be replaced by the manufacturer, a certified service agent or qualified service
personnel.
Do not store articles on the top of the appliance.
ŘWhen you open or close the door, the articles may fall and cause personal injury and /or damage to
surrounding objects.
Do not store pharmaceutical products, scientific materials and temperature-sensitive
products in the refrigerator.
ŘProducts that require exact temperature controls should not be stored in the Refrigerator.
Do not allow children to climb, stand or hang on shelves and handles of the
Refrigerator. They could damage the Refrigerator and seriously injure themselves.
Do not sit on the freezer door. The door may break.
Do not allow children to climb into the freezer basket.
If you notice a chemical or burning plastic smell or see smoke, unplug the Refrigerator
immediately and contact your Samsung Electronics Service Center.
After your Refrigerator is in operation, do not touch the cold surfaces in the Freezer
compartment. Particularly when hands are damp or wet, skin may adhere to these
extremely cold surfaces.
ŘSkin may stick to the surface and you may get frostbite.
Do not put your hands under the appliance.
ŘAny sharp edges may cause personal injury.
Never put fingers or other objects into the water dispenser hole or ice chute.
Safety Information _5
CAUTION
,) /QVLJ! !"")5
It may cause personal injury and/or material damage.
If the Refrigerator will not be used for a long period of time (for example, over several
months), unplug the power from the wall.
Over time, deterioration in the power cord insulation may cause fire.
Do not use a wet or damp cloth when cleaning the plug.
Remove any dust or foreign matter from the power plug pins.
A Dirty power plug can increase the risk of fire.
If the Refrigerator is disconnected from the power supply, you should wait for at least
five minutes before plugging it back in.
Do not place the equipment directly in sunlight.
The appliance must be positioned for easy access to power source.
If the power cord is damaged, it must be replaced by the manufacturer, a certified
service agent or qualified service personnel.
If you have a long vacation planned, empty the Refrigerator and turn it o.
Wipe excess moisture from the inside and leave the doors open to keep odor and mold from developing.
Service Warranty and Modification
Any changes or modifications performed by a 3rd party on this finished appliance is not covered under
Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party
modifications.
Children can get trapped inside Refrigerators.
Before you throw away your old Refrigerator or Freezer, make sure that you;
Take o the doors.
Leave all shelves in places so that children may not easily climb inside and shut the door while they are
inside.
This appliance is not intended for use by small children or infirm persons without capable, adult
supervision. Small children should be supervised when using the appliance.
Safety Information
6_ Safety Information
CAUTION
Contents
08
22
08 Getting ready to install the refrigerator
09 Setting up the Refrigerator
09 How to assemble the handle
10 Removing the refrigerator doors
12 Disassemble the freezer drawer
13 Reattaching the refrigerator doors
15 Assem ble the freezer drawer
16 Adjusting the doors
17 Making minor adjustments between doors
18 Adjusting the freezer drawer level
18 Checking the water dispenser line
20 Installing the water line
22 Using the control panel
23 Using the digital display
24 Controlling the temperature
25 Using the ice and cold water dispenser
26 Ice production
27 Parts and features
28 Storing food
29 Using the cool select pantry™
29 Using the tilting pocket
30 Removing the refrigerator access ories
31 Using the doors
emoving the freezer access ories
32 R
33 Cleaning the refrigerator
34 Changing t he interior light led
35 Changing the water filter
40
WARRANTY
41
WIRING DIAGRAM
42
40 Troubleshooting
41 Warranty
42 Wiring diagram
Contents _7
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
location with easy access to the water supply.
location without direct exposure to sunlight.
location with level (or nearly level) flooring.
location with enough space for the Refrigerator doors to open easily.
Allow sufficient space for air circulation of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling
system may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water
line connections. When you install the refrigerator next to a fixed wall, minimum
clearance is 3 ¾” (95mm) between the refrigerator and wall to allow the door to
swing open.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
B
B
A
A
Model
RF267
Depth
“A”
29- ”
(83.6cm)
Width
“B”
35-¾”
(90.8cm)
Height
“C”
69”
(175.2cm)
Overall
Height “D”
69-¾”
(177.4cm)
Depth
“E”
35- ”
(90.5cm)
E
E
C
C
D
D
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are
in the up position (above the floor). Refer to ‘Levelling the
refrigerator’ in the manual.
To protect the finish of the flooring, place the protection
sheet such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the refrigerator,
CAUTION
be sure to pull the unit straight out and push back in straight
after finishing.
8_ Setting Up
Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
Screwdriver
SETTING UP THE REFRIGERATOR
Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of
the appliance. By completing the following steps, your Refrigerator should be fully operational.
1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the
Refrigerator. Refer to installation instructions in this manual.
2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled
and the motor will run smoothly.
4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food
and drinks in the Refrigerator after the temperature is sufficiently cool.
Check the accessory list below.
01 SETTING UP
Water filter
(DA29-00002B)
Hex wrench
(DA80-00002C)
Fastener
(DA60-00143B)
COMPONENTS FOR HANDLE ASSEMBLY
[ 3-DOOR TYPE ]
HOW TO ASSEMBLE THE HANDLE
OKOK
Fridge door handle assembly
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
each other.
Compressin fitting
(DA62-00305A)
Fridge
Freezer
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
Compression nut
Wrench : 3/32 inch
Label Handle Instruction
(DA74-00070B)
the screw and then put the handle
(Optional)
Setting Up _9
Setting up your French Door Refrigerator
HOW TO ASSEMBLE THE HANDLES (CONT’D)
Freezer / Flex zone door handle assembly
•
CAUTION
Please do not remove the Freezer/ Flex Zone drawer.
Handle can be attached without removing the door.
OKOK
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
down.
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
*
Tilt up the Handle bar and turn the wrench.
Put the handle on the xer
REMOVING THE REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.
Tools you will need
Philips screwdriver 10mm Socket Wrench Allen wrench(5mm)
Flat-blade screwdriver Pliers
Disassemble the Refrigerator doors
1.
With the door opened, remove the Top Table cap
) with a Flat head screwdriver, and close the
(
door.
Remove the 3 screws holding down the Top Table
2
and remove the Top Table(
PICTURE.
10_Setting Up
) AS SHOWN IN THE
2
3. Remove the three hex head bolts(6) attached
to the upper left and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver, remove the ground
screw(
7
) attached to the upper left and right door
hinges.
Remove the upper left and right door hinges(
8
).
4. Lift the door straight up to remove.
5. With a Philips head screwdriver, remove the two
screws(
) attached to the lower left and right
door hinges.
With an Allen Wrench(5mm), remove the two hex
head bolts(
) attached to the lower left and right
door hinges.
Remove the lower left and right door hinges(
).
6
7
8
3
4
5
Red Clip
(1/4”)
If a red clip is on the coupler, it must be removed
before removing the tube.
CAUTION
2. Disconnect the oneconnector ( )
3
on left side door, pressing the middle
part while is taking away. Remove the tube
( ) with pressing
strongly the dark gray
4
5
color ( ) of thewater line couple, take away
the hose atthe same time.
Be sure to close the door to prevent doors damage.
9
10
11
9
10
11
01 SETTING UP
Setting up_11
4. Remove four 10mm hex-head bolts from both sides.
5. Lift the freezer door up from the rails.
2. Remove the tilting pocket(
) by pulling strongly on both brackets( )
2
upward at the same time.
3. Take out the lower basket(
3
) by lifting the basket up fr om
rail system.
1. rtilitnurewardreppuehthsuP eaches to the cabinet r ear wall.
DISASSEMBLE THE FREEZER DRAWER
2
3
Setting up your French Door Refrigerator
12_Setting up
Setting Up_13
REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
1. Reattach the lower left and right door hinges(
).
spilihPahti W head screwdriver, insert and tighten the
two screws(
) into the lower left and right door hinges.
With a Allen Wrench(5mm), insert and tighten the two hex
head bolts(
) into the lower left and right door hinges.
2. Place the hole in the bottom of the door over the lower
hinge(
).
Be careful not to miss the hinge cap because it can
.
3. Insert the upper hinges(
9
) into the holes at the top
of the doors.
With a Wrench(10mm), insert and tighten the 3 hex
head bolts(
7
) into the upper left and right door
hinges.
With a Philips head screwdriver, insert and tighten
the ground screw(
8
) into the upper left and right
door hinges.
9
7
8
01 SETTING UP
14_Setting Up
REATTACHING THE REFRIGERATOR DOORS
3
4
Red Clip
(1/4”)
Dispenser
Door Tube
Cabinet
Tube
5
3
5. Position the Top Table(2) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap(
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
4. Connect the water line (5) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(
4
) on left side
door and two connectors (
3
) at each side
of the top cap.
The clip is enveloped inside of the top cap.
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
CAUTION
coupler
Be sure to sensor (yellow cable) is inside the top table.
Setting up your French Door Refrigerator
Setting Up_15
ASSEMBLE THE FREEZER DRAWER
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket (
6
) into
the rail system.
5. Hook the ends of the tilting pocket (
7
) into both brackets (8),
and push down until they lock into place.
1. Pull out the rails to the full length on each side of the cabinet evenly.
7
8
Slot
Slot
6
CAUTION
Make sure the door is well assembled on the rail
CAUTION
If the drawer is not properly assembled on the rail, the door
will not close and it will cause frost.
01 SETTING UP
16_Setting Up
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can
make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
When the Left door is lower than the Right door.
Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise
to level the left door.
When the Left door is higher than the Right door.
Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise
to level the right door.
We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the
best way to make minor adjustments to the doors.
Screwdriver
Setting up your French Door Refrigerator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
Adjustment
part
1. If you open the drawer (
2. Insert the supplied hex wrench (
), you can see the lower hinge (2).
3
) into the shaft (4) of the lower hinge.
3. Please adjust the height by turning the hex wrench (
2
4
Adjustment
part
3
) clockwise(
When the left
door is higher
than the right
door.
) or counter-clockwise( ).
33
01 SETTING UP
when you turn the hex wrench counter-clockwise( ), the door will move up.
1. After adjusting the doors, please insert the supplied fastener-ring (
7
gap between the hinge-grommet (
) and the lower hinge(8). The number of fastener-rings you’ll need
to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 0.04 inch.
5
) using a pair of pliers (6) in the
Setting Up_17
18_Setting Up
ADJUSTING THE FREEZER DRAWER LEVEL
1. Locate the height-adjuster (
) in the freezer drawer.
Unscrew the four Phillips screws (
2
) slightly to loosen the door.
2. Loosen the controller screw(
3
) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
Freezer Drawer
Adjustment part
2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
Setting up your French Door Refrigerator
CHECKING THE WATER DISPENSER LINE
A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better
health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or
destroy microorganisms. You may need to purchase a water purifying system to do that.
In order for the ice maker to operate properly, a water pressure of 20~125 psi (pound per square inch) is
required.
Under normal conditions, a 170 cc (5.75 oz.) paper cup can be filled in 10 seconds.
If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to
compensate for the low pressure.
Make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser
lever until the water runs from the water outlet.
Setting Up_18
Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that
contains copper tubing.
Connecting to the water supply line
the main water supply line and tur .
2. Locate the nearest cold, drinking water line.
3. After connecting the water supply to the water filter, turn your main water supply back on and flush four
or more gallons into a bucket to clear and prime the water filter.
2
3
4
01 SETTING UP
20_Setting Up
INSTALLING THE WATER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection. You
may find these items sold as a kit at your local hardware store.
1/4” compression nut
plastic tubing
copper tubing
ferrule
Installing the water filter.
1. Remove the water filter cover(
)
2. Remove the fixed cap by turning it counter clockwise.
Keep the cap in a safe place for later use if you don’t
use the filter.
3. Remove the water filter from the box and put a
replacement indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months in
the future. For example, if you install the water filter in
March, put the “SEP” sticker on the filter to remind you
to replace it in September. That way you’ll know when
it is time to replace the filter. Normally, a filter life is
about 6 months.
2 3
Sticker
(month indicator)
Only connect the water line to a drinkable water source.
If you have to r
1/4“ of the plastic tubing to make sure you get a snug,
leak-free connection.
Do not use without the molded end(Bulb) of the plastic tubing .
1. Tighten the compression nut onto the 1/4” compression fitting.
- If you are using copper tubing, slip the compression nut
(not included) and ferrule (not included) on
copper tubing (not included) as shown.
- If you are using plastic tubing
, insert the molded end(Bulb) of the plastic tubing into the
compression fitting.
2. Tighten the compression nut
onto the compression fitting. Do not over-tighten the compression nut .
3. Turn water on and check for any leakage.
CAUTION
Assembled)
Assembled)
Setting up your French Door Refrigerator
Setting Up_21
4. Remove the filter cap and insert the filter into the filter
housing.
5. Slowly turn the water filter 90º clockwise to align with the
printing mark on the cover, locking the filter in position.
Make sure to align the water filter label mark with center of
cover filter printing as illustrated. Remember, do not overtighten.
You should remove the right side upper glass shelf before installing water filters.
Removing any residual matter inside the water supply line after
installing the water filter.
1. Turn ON the main water supply & turn OFF the valve to the water supply line.
2. Run water through the dispenser until the water runs clear (approx. 6-7
minutes). This will clean the water supply system and remove air from the lines.
3. Additional flushing may be required in some households.
4. Open the Refrigerator door and make sure there are no water leaks coming
from the water filter.
Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser.
This means that there is still air in the line.
Turn until the
labels are aligned.
Separation
of red cap.
Cover filter.
4 5
Reverse Osmosis Water Supply
IMPORTANT : The pressure of the water supply coming out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to
the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa.)
If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):
necessary.
with a reverse osmosis system. Remove the water filter.
If you have questions about your water pressure, call a licensed, qualified plumber.
01 SETTING UP
22_Operating
Operating your SAMSUNG French Door
Press the button to set the Freezer to your desired temperature.
You can set the temperature between -14°C and -25°C.
Press and hold the
Button for 3 seconds, to speed up the time needed to
freeze products in the Freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the
temperature in the Freezer has warmed dramatically (For example, if the door was left open).
For better energy efficiency, press the button. If condensation occurs on the doors,
turn the function o.
(
) Energy Saver
Button
(
2
) Freezer / Power
Freeze Button
Press the button to select the ice or water function. You can select water or the types of
ice(cube/crushed ice).
After making a selection, press the dispenser lever.
(
3
) Ice / Water Button
Press the button to turn o the door open alarm. Initially the is set to on.
If you press and hold the button for 3 seconds, the Dispenser LED Lamp will stay on.
(
4
) Alarm / Lighting Button
Press the Fridge / Power Cool button to set the fridge to your desired temperature.
You can set the temperature between 1°C and 7°C.
Press and hold the
button for 3 seconds, to speed up the time needed to cool
products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the
temperature in the fridge has warmed dramatically (For example, if the door was left open).
(
5
) Fridge / Power Cool
Button
Press the button to turn the ice making function o.
If you press and hold the
button for 3 seconds, the Display and Dispenser will be locked.
(
6
) Ice O / Lock Button
2
3
4
5
6
Refrigerator
USING THE CONTROL PANEL
Operating_23
USING THE DIGITAL DISPLAY
Power Freeze
This icon will light up when you activate the “Power Freeze” feature. “Power Freeze” is great when you
need a lot of ice.
When you have enough ice, just press the button again to cancel the “Power Freeze” mode.
If you select “Power Freeze” , the inside temperature of the Freezer will decrease for about two and a half
hours.
Power Cool
This icon will light up when you activate the “Power Cool” button. For a quick fridge cool down, use
“Power Cool” .
If you select “Power Cool” , the inside temperature of the Fridge will decrease for about two and a half
hours.
Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about
every 6 months.
The filter Indicator will be Blue when you initially insert the water filter.
The filter Indicator will be Light Pink when you have used your water filter for 5 months.
The filter Indicator will be Red when you have used your water filter for 6 months.
After removing the old water filter and installing a new one (see page 33 for instructions on how to do
this), reset the indicator by pressing and holding the “Ice/Water” button for 3 seconds.
Cubed Ice , Crushed Ice , Water
Enjoy cubed or crushed ice by selecting your preference from the digital control panel. If you don’t
need ice, turn the featur
to save on water and energy consumption. The Ice type light indicates the
type of ice(or no ice) that is currently chosen.
Mode (“OF & OF” code on the display)
Mode, the refrigerator works but doesn’t make cool air. To cancel this mode, press
the Power Freeze and Freezer buttons at the same time for 3 seconds until a “Ding-dong” sound
is heard and the unit will now cool.
CAUTION
This function is for store display refrigerators. It is not for customer use.
02 OPERATING
24_Operating
Operating your SAMSUNG French Door
CONTROLLING THE TEMPERATURE
Basic T emperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are
-19°C and 3°C respectively.
If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature
manually.
Controlling the Freezer temperature
The Freezer temperature can be set between -14°C and -25°C to suit your particular needs. Press the
Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in
mind that foods like ice cream may melt at -15°C.
The temperature display will move sequentially from -25°C to -14°C. When the display reaches -14°C,
it will begin again at -25°C.
Controlling the Refrigerator temperature
The Refrigerator temperature can be set between 7°C and 1°C as your particular needs. Press the
Fridge button repeatedly until the desired temperature is shown in the temperature display. The
temperature control process for the Fridge works just like the Freezer process. Press the Fridge button
to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly
set temperature. This will be reflected in the digital display.
The temperature of the Freezer or the Refrigerator may rise when you open the doors too frequently, or if a
large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their
normal set temperatures, the blinking will stop.
If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for
ar
ound 10 minutes and then plug the power cord back in.
Energy Saver
This icon will light up when you activate the “Energy Saver” function is automatically set to “ON” when poer is
supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function o.
Alarm
This icon will light up when you activate the “Alarm” feature. The door alarm will sound if any door is open for
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Ice O
This icon will light up when you activate the “Ice O” feature. In this case, the ice will not be produced.
Lock
This icon will light up when you activate the “Lock” feature. In this case, you won’t to be able to use the
control panel. If you press and hold the Ice O / Lock button for 3 seconds, you will be able to use the
contr
ol panel again.
Lighting
This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser,
turn the “Lighting” feature o.
Refrigerator
Operating_25
PUSH
If you have a long vacation or business trip, close the water valve and shut o the water supply to the Refrigerator. This
will help prevent accidental leakages.
Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
Never put your finger or any other objects in the dispenser opening.
- It may cause injury.
Do not disassemble the Ice Maker personally. It may cause disorder.
Do not wash or spray the ice bucket with water.
Just wipe it with a dry cloth. In order to operate the ice maker properly, water pressure of 138~862 Kpa is required.
CAUTION
Select this if you
want to turn ice
maker o.
All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process,
the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become
saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get
supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.
The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will
look clear.
USING THE ICE AND COLD WATER DISPENSER
Using the Ice O Function
When selecting the Ice O mode, remove all ice cubes from the bucket.
If you are not using the ice dispenser the ice cubes may clump together.
Pull the lock lever forward to throw away ice cubes or remove clumped ice
from the bucket. Push the bucket back until you hear a click.
Using the Water dispenser
Place a glass underneath the water outlet and push gently against the water dispenser lever with your
glass. Make sure the glass is in line with the dispenser to prevent the water from splashing out.
If you have just installed the Refrigerator or just installed a new water filter, pour out the first six
glassfuls of water to flush out impurities in the water supply system. Make sure water flows cleanly
before drinking.
Using the Ice Dispenser
Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass.
Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.
Press the Ice / Water button to select the type of you want
If the Freezer door is left open for a long time, condensation may form or the ice
inside the Ice-Maker may clump. Please close the door as soon as possible.
The Ice Dispenser may eject only a few ice cubes if there is not enough ice in the
Ice-Maker.
Use the Ice Dispenser when there is enough ice.
If the Freezer door is open for a long time or a lot of ice is dispensed at once,
condensation may trickle down the Dispenser lever.
CAUTION
When you do not use the water dispenser for 2~3 days (especially during the summer), the dispensed water may have a
funny smell or taste. If this occurs, we recommend that you discard the first 1~2 glasses for better tasting water.
CAUTION
02 OPERATING
26_Operating
ICE PRODUCTION
Operating your SAMSUNG French Door
Normal Use
To fill ice bucket to maximum capacity after installation, make sure to do the
following steps.
1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).
2. Waiting 24 hours will allow your ice maker to cool properly.
3. Dispense 4 to 6 ice cubes into the glass.
4. After 8 and 16 hours, dispense a full glass of ice at each time.
Please wait 1 second before removing the cup after dispensing water to
prevent spills. Do not pull out the lever dispenser after taking out ice or
water. It comes back automatically. Ice is made in cubes. When you select
“Crushed”, the icemaker grinds the ice cubes into crushed ice.
Test button
In case ice doesn’t come out, pull out the ice bucket and press test button
located on the right side of ice maker.
Test Button
Whenever all ice is used at one time, the above step 3 and 4 must be repeated (before dispense the first
4 to 6 ice cubes, it needs waiting 8 hours). This will replenish the ice cubes and ensure maximum ice
production.
CAUTION
When you dump the ice from the ice bucket, you should press the
dispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ function ON to
get new ice faster after replacing the ice bucket in the refrigerator.
CAUTION
Refrigerator
Operating your SAMSUNG French Door
Refrigerator wherever it appears
PARTS AND FEATURES
Ice-Maker
Foldable-Shelf
Slide-Shelf
Vertical Hinged
Section
4
Vegetable & Fruit
LED Light
Drawers
Use this page to become more familiar with the parts and features of the Refrigerator.
LED Light
Auto Door Closer
Dairy
Compartment
Water Filter
Slide-Shelf
Door Bins
Quick-Space
Glass Shelf
Cool Select
TM
Pantry
5
LED Light
02 OPERATING
3
2
Auto Pull Out Drawer
7
Tilting Pocket
Freezer Drawer Bin
When closing the door, make sure the Vertical Hinged Section is in the correct position to avoid scratching
the other door.
If the Vertical Hinged Section is reversed, put it back to the right position and close the door.
Moisture may occur at times on the Vertical Hinged Section.
The door handle may become loose over time.
If this happens, tighten the bolts found on the inside of the door.
If you close one door with a lot of force, the other door may open.
6
8
Operating_27
Loading...