Samsung PS51F5505, PS60F5505 User Manual

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com

BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

BOSNIA 051 331 999 www.samsung.com

BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg

CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr

CZECH 800 - SAMSUNG (800-726786) www.samsung.com

DENMARK 70 70 19 70 www.samsung.com

FINLAND 030-6227 515 www.samsung.com

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY 0180 6 SAMSUNG bzw.

CYPRUS 8009 4000 only from landline www.samsung.com/gr

GREECE 80111-SAMSUNG (80111 726 7864) only from land line

HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 261 03 710 www.samsung.com

MONTENEGRO 020 405 888 www.samsung.com

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com

NORWAY 815 56480 www.samsung.com

POLAND

PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com

ROMANIA 08008 SAMSUNG (08008 726 7864)

SERBIA 011 321 6899 www.samsung.com/rs

SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com

SPAIN 902172678 www.samsung.com

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com

SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch (German)

U.K 0330 SAMSUNG (7267864) www.samsung.com

EIRE 0818 717100 www.samsung.com

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

TURKEY 444 77 11 www.samsung.com

Customer Care Centre

Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4

0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk

max. 0,60 €/Anruf)

([phone] from mobile and land line

0 801-172-678* lub [phone] **

*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora)
** (koszt połączenia według taryfy operatora)

TOLL FREE No.

Web Site

www.samsung.com/be_fr (French)

www.samsung.com

www.samsung.com/gr

www.samsung.com/pl

www.samsung.com/ro

www.samsung.com/ch_fr (French)

Plasma TV

user manual

MORE

e-Manual

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/register

Model _____________ Serial No. _____________

© 2013 Samsung Electronics Co., Ltd. All rights reserved.

[PF5500-XE]BN68-04885H-04L05.indb 1 2013-11-13  5:12:31

BN68-04885H-04

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,
and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power
cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under
environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

• Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially
when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the
insulation to deteriorate.

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances and where it operates for 24 hours such as the aerial port, the train station etc.

• Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.

This symbol alerts you that important literature
concerning operation and maintenance has
been included with this product.

English - 2

[PF5500-XE]BN68-04885H-04L05.indb 2 2013-11-13  5:12:32

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product
appearance. Product design and specifications may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for
customers in EU region.

Features for your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users can surf
the web, download applications, and stay in touch with family and friends through social networking services. In
addition, you can enjoy photo, video, and music files stored on external storage devices.

™ Press to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can
also make video calls to friends by connecting the TV to a camera (sold separately).

Apps: Download and install applications such as WebBrowse.

On TV: Check a listing of programmes that are currently aerialing and are scheduled to aerial. (Depending on the

country)

Films and TV Shows: Purchase and watch movies and series without a separate external device. (Depending on
the country)

Photos, Videos & Music: Play back photo, video, and music files from an external storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your
Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 13)

• Voice Recognition: Voice Recognition lets you access and control specific functions of the TV using voice
commands.

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

• Screen Mirroring: Displays mobile device screens on your TV wirelessly.

EnglishEnglish

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these
substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.

English - 3

[PF5500-XE]BN68-04885H-04L05.indb 3 2013-11-13  5:12:32

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

✎

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

[

• Smart Touch Control & Batteries (AAA x 2) • Power Cord

• Remote Control & Batteries (AAA x 2) • Samsung 3D Active Glasses (40 inch model and above)

• User Manual • Regulatory Guide

• Warranty Card (Not available in some locations)

Ferrite Core (4EA) IR Extension Cable Cable manager

• An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

English - 4

[PF5500-XE]BN68-04885H-04L05.indb 4 2013-11-13  5:12:32

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables

✎

from interference. When connecting a cable, open the ferrite core and clip it
around the cable near the plug as shown in the figure.

• Maximum distance between the ferrite core and the end of the cord

inserted in the TV: 3/4 inches

Ferrite Core : The ferrite cores are used to shield the cables from

✎

interference. When connecting a cable, open the ferrite core and clip it
around the cable near the plug as shown in the figure.

• Use Cat 7 cable for LAN cable.

EnglishEnglish

A

Power Cord

Warning: Screens can be damaged from
direct pressure when handled incorrectly.
We recommend lifting the TV by the edges,
as shown.

Don't Touch
This Screen!

Antenna Cable /

Component Cable

(sold separately)

LAN Cable

(sold

separately)

English - 5

[PF5500-XE]BN68-04885H-04L05.indb 5 2013-11-13  5:12:33

Basic Features

Using the Smart Touch Control

Depending on the model.

✎

You can use the MIC to give Voice Recognition commands. Simply press the VOICE

Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding noise.

✎

Turns the TV on and off.

Displays and selects the available video

sources.

˜

button.

Turn on and off the satellite or cable set-top
box connected to the TV. For this, the Smart
Touch Control must be confi gured as a
universal remote control.

VOICE

˜

Take your voice command and enter a text
using your voice.

Turns the TV sound on/off.

Press and hold this

button to select Audio

Description and Subtitle.

(Depending on the country

Toggles this button between Recommended

The colour buttons work differently, depending on

the function that the TV is currently performing.

Press and hold the { button while watching TV to

view information about the current programme.

Returns to the previous menu. Press and

hold this button to exit all currently running

Brings up Smart Hub applications. See the

e-Manual chapter, Smart TV Features >

To exit an application that is running,

✎

MUTE

or region.)

Adjusts the volume.

press the

and Search.

applications.

Smart Hub.

™

button.

Changes channels.

Displays a virtual remote control on
the screen. See the e-Manual chapter,

Controlling TV > Using the Virtual Remote
Control.

Press and hold the MORE button to select
a desired function (e.g. MENU (

T

), INFO (`), etc.) easily.

(

Touch Pad

• Drag on the Touch Pad to move the
focus on the screen.

• Press the Touch Pad to run, activate, or
select the highlighted item.

• Press and hold the touch pad to display
the Channel List.

View each digital channel's programming
schedule, including showtimes. In addition,
sets a Schedule Viewing or Schedule
Recording to press the touch pad on the
programme entry scheduled to air later.

m

), TOOLS

Connecting to the TV

In order to operate the TV using a Smart Touch Control , you must fi rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired
Samsung TV.

We recommend to use the Smar t Touch Control in less than 6m. A usable distance may differ depending on the wireless environmental conditions.

✎

1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV button for the fi rst pairing. Only this buttons sends an IR
signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.

<Attempting to connect and completion icons>

Reconnecting the Smart Touch Control

<The Smart Touch Control's pairing button>

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused by insuffi cient battery power. If
the problem persists, press the PAIRING button on the Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be
accessed without removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the Smart Touch Control to
the TV receiver and press the PAIRING button. When pairing is complete, the pairing image displays at the bottom left of the TV screen.

English - 6

[PF5500-XE]BN68-04885H-04L05.indb 6 2013-11-13  5:12:33

Battery Low Alarm

If the battery becomes and blanks low while using the Smart Touch Control, the following alarm
window blinks and appears at the bottom left of the screen. If the alarm window pops up, replace
the batteries of the Smart Touch Control. Use alkaline batteries for longer usage.

Inserting the Batteries (AAA X 2)

EnglishEnglish

1

1. Slightly lift the battery cover using a plastic card. Next, pull on the cover’s notch with a fingernail to remove the cover
completely.

Check the location of the battery cover groove. The groove's location may vary depending on the type of

✎

Smart Touch Control is provided with the product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly

attached to the remote control.

2

3

Using the Touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging Press

Drag on the touchpad in the desired direction. Move the

focus or the pointer in the direction the finger is dragging.

Press the touchpad. This selects the focused item.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad to
bring up the numerical input window on the screen. Use your finger to enter the number
for the channel you want to watch. The recognised number is displayed on the screen and
the TV switches to the corresponding channel. However, the number you have entered
may not be recognised properly by the TV. Refer to the guide below to ensure that your
numerical entries are recognised accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not follow
the sequences shown below.

English - 7

[PF5500-XE]BN68-04885H-04L05.indb 7 2013-11-13  5:12:34

Show Status and Notification Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual control panel to display the
status and notification banner at the top of the screen.

Recommendations, History and Searching

Recommendations

Press the RECOMM. / SEARCH button and then select Recommended from the list displayed at the bottom
of the screen. Select a programme that is currently airing to jump to the corresponding channel or a programme
that is scheduled to air to set up a Schedule Viewing or Schedule Recording setting. Refer to the "Scheduled
Recommended Programme Info" for more information.

Select an application to launch. Samsung Apps will launch if the selected application is not installed on the TV. Refer to
the "Samsung Apps" for more information.

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen. This
displays an interactive list of recently accessed channels, media content and applications.

Searching

Press the RECOMM. / SEARCH button twice. Enter search criteria to search not only many apps and their contents on
the TV but also the Web.

Adjusting the Touchpad

Screen Menu > System > Device Manager > Smart Touch Control Settings > Touch Sensitivity

Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust sensitivity and
make it more convenient to use.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual remote panel consists of a number
panel, a playback control panel, and a quick access panel. Use the Touch Pad to select numbers and buttons. Press
and hold the MORE button. A quick access panel of virtual remote panel appears. You can select screen buttons easily.

Changing the Virtual Remote Control Panel

Choose the number panel, playback control panel, or quick access panel as the panel to be shown on the screen.

Use the touchpad to keep moving the focus left or right. The panel changes when the focus is moved beyond the
leftmost or rightmost edge.

Use left/right scroll function on the touchpad to change the panel easily.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV.
Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next file, and much more while enjoying media
content.

Using the Quick Access Panel

Quickly access the INFO, MENU and e-Manual buttons. However, the availability of buttons vary depending on the
operating mode of the Smart Touch Control (with the TV only, as a universal remote, etc.).

English - 8

[PF5500-XE]BN68-04885H-04L05.indb 8 2013-11-13  5:12:34

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE, Y, < P >,

MENU, TOOLS, E, INFO, CH LIST, RETURN, GUIDE and EXIT.

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually

✎

impaired persons.

Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, refer to the

✎

e-Manual.

EnglishEnglish

Turns the TV on and off.

Gives direct access to channels.

Alternately select Teletext ON Double, Mix

or OFF.

Adjusts the volume.

Displays channel lists on the screen.

Opens the OSD (Menu).

Quickly selects frequently used functions.

Moves the cursor, selects the on-screen

menu items, and changes the values seen on

the TV's menu.

Returns to the previous menu.

Displays and selects the available video
sources.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Brings up Smart Hub applications. See the
e-Manual chapter, SMART TV Features >
Smart Hub.

Displays the EPG (Electronic Programme
Guide).

Displays information on the TV screen.

Exits the menu.

Use these buttons according to the directions

on the TV's screen.

Use these buttons in a specific feature. Use

these buttons according to the directions

on the TV's screen.

E-MANUAL: Displays the e-Manual.

X: Turns the 3D function on or off. See
e-Manual chapter TV Viewing > 3D TV.

AD/SUBT.: Turns the audio description on

and off (not available in some locations).
/ Displays digital subtitles. See e-Manual
chapter TV Viewing > Subtitles.

': Stop.

English - 9

[PF5500-XE]BN68-04885H-04L05.indb 9 2013-11-13  5:12:35

Installing batteries (Battery size: AAA)







Match the polarity of the batteries to the symbols in the battery compartment.

NOTE

✎

− Use the remote control within 23 feet of the TV.

− Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or
neon signs.

− The colour and shape may vary depending on the model.

Turning on the TV

Turn on the TV using the P button on the remote control or TV panel.

The product Colour and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the

✎

remote control.

mR

TV Controller

The image is drawn by facing the front
side of the TV.

When you use the Smart Touch Control, a

standby LED does not work (except

Function menu

P

Remote control sensor

P

button).

SETUP

The initial setup dialog appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup
process, including menu language choice, channel scan, network connection, and more. At each step, either make a
choice or skip the step. Users can manually perform this process at a later time under the Screen Menu > System >
Setup menu.

If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to

✎

Settop box automatically.

If you do not want to select Set-top box, please select Aerial.

✎

[PF5500-XE]BN68-04885H-04L05.indb 10 2013-11-13  5:12:35

English - 10

Switching Between Video
Sources

Press SOURCE button to switch between devices
connected to the TV.

For example, to switch to a game console connected
to the second HDMI connector, press SOURCE button.
From the Source list, select HDMI2. The connector
names may vary depending on the product. Select Tools
button at the upper-right corner of the screen to access
the following functions.

• Information

View detailed information about the connected
devices.

• Edit Name

You can rename devices connected to the TV to more
easily identify external sources.

With a computer connected to the TV's HDMI (DVI)
port via an HDMI cable, for example, you can change
Edit Name to PC.

With a computer connected to the TV's HDMI (DVI)
port via an HDMI-to-DVI cable, for example, you can
change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI)
port via an HDMI-to-DVI cable, for example, you can
change Edit Name to DVI Devices.

• Anynet+ (HDMI-CEC)

A list appears showing Anynet+ compatible ones of
external devices connected to the TV.

✎

• Disconnect USB Device

Remove the USB device from the list safely. This
function is only available when the USB device
selected.

• Universal remote setup

To add a new external device to control it with the
Touch Remote Control, press the SOURCE button
and select Universal remote setup on the top right
of the screen. Using the universal remote control,
users can control external devices connected to the
TV, such as a settop box, Blu-ray player, and AV
receiver.

Universal Remote Control Setup

EnglishEnglish

This function is only available Anynet+ (HDMI­CEC) function set to On.

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and
other third-party external devices connected to the TV using the TV's remote control.

Some or new models of the external device connected to the TV, may not be supported the Universal Remote

✎

Setup.

Keep a distance of 5 cm at least between the IR Extender and the external device, as the illustration shows. Face the
IR Extender toward the external device’s remote control signal receiver. Note that it should be no obstacle between
IR Extender and external device. The presence of an obstacle will interfere with the transmission of the remote control
signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up the
Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote

control by entering the model number manually.

English - 11

[PF5500-XE]BN68-04885H-04L05.indb 11 2013-11-13  5:12:35

Connecting to a COMMON INTERFACE slot (Your TV
viewing Card Slot)

Turn the TV off to connect or disconnect a CI card.

✎

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will display the
message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or CI+
CARD” ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.

• When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.

NOTE

✎

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD”
may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be
seen.

English - 12

[PF5500-XE]BN68-04885H-04L05.indb 12 2013-11-13  5:12:35

Network Configuration

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.

This TV has a built-in user guide. To read it, use one of the following methods:

• Open the Support menu and choose e-Manual (Troubleshooting).

• Press the E-MANUAL button on the standard remote control.

• Press the MORE button on the Smart Touch Control to display control buttons on the screen. Flick the Touch Pad
until e-Manual appears and select it.

Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

✎

A printable version of this guide is also available at www.samsung.com/support.

✎

Scrolling a Page

To scroll a page, use of one of the following methods:

• Press the

• Drag or flick up or down the line on either the left or right edge of the touchpad.

• Place the focus on the

Using the Top Icons

Use the Back, Forward, and Opened page icons on the top left of the screen to navigate through pages. These icons
are available when two or more pages are passed.

Returning to the Home Page

or button on the scroll bar at the right edge of the screen.

or button at the right edge of the screen, drag or flick up or down on the touchpad.

EnglishEnglish

To return to the home page, press the a button or select

Searching the Index

Press the b button or select
containing the term.

Searching Pages

Press the { button or select

Done. Select an item from the search results list to navigate to the relevant page.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select

EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select
menu item directly to the related section in the e-Manual. If you want to read an e-Manual entry on a specific screen
menu feature, press the Virtual Remote panel's or the regular remote's E-MANUAL button to load the corresponding
e-Manual page.

This feature may not be available, depending on the menu.

✎

on the top right of the screen to display the index. Select a term to display the page

on the top of the screen to access the search screen. Enter a search phrase and select

on the top right of the screen.

at the upper-right corner of the screen or press

. It is possible to jump from a

English - 13

[PF5500-XE]BN68-04885H-04L05.indb 13 2013-11-13  5:12:36

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-manual can be updated in the same way
with an application update.

On the More Apps screen, select Apps to update. Select e-Manual from the list. The e-Manual starts updating to the
latest version. However, Apps to update appears on the screen only when the update is required.

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well as software
updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

Wireless IP Router or Modem

that has a DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless Network Precautions

• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE

802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports
DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is
currently being used by another device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security system, you need
to create a security key using characters and numbers. This security key is then needed to connect to the wireless
network.

English - 14

[PF5500-XE]BN68-04885H-04L05.indb 14 2013-11-13  5:12:36

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-certified wireless
routers:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the Encryption Type to
WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-Fi certification
specifications.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push
Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key
settings.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated starting below:

TV Rear Panel

The Modem Port on the Wall

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

EnglishEnglish

The Modem Port on the Wall

Modem Cable
(Not Supplied)

The LAN Port on the Wall

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

✎

External Modem

(ADSL / VDSL / Cable TV)

LAN Cable

(Not Supplied)

LAN Cable (Not Supplied)

IP Router that has a

DHCP Server

TV Rear Panel

LAN Cable

(Not Supplied)

TV Rear Panel

English - 15

[PF5500-XE]BN68-04885H-04L05.indb 15 2013-11-13  5:12:37

3D Basics

2~6m

50cm

3D Active Glasses

This feature is only available on 40 inch model and

✎

higher.

Features

Samsung's SSG-5100GB 3D glasses enable you to view
3D images on your 3D TV. The Samsung 3D glasses
communicate with Samsung 3D TVs via the 2.4GHz RF
band.

The Samsung 3D glasses are only compatible with

✎

Samsung D, E, and F series 3D TV's that were
released in 2011, 2012, and 2013. These 3D glasses
cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Battery Cover

Liquid crystal shutter

For details on how to attach the glass temples and how
to pair the glasses with the TV, refer to the separate 3D
glasses manual.

Replacing the Battery

Pairing 3D Active Glasses

What is Pairing? Pairing is the process of connecting

✎

3D glasses and a 3D TV so that the two devices can
exchange data.

Ensure your Samsung TV and 3D glasses are no

✎

farther than 19.5 in (50 cm) apart from each other
while pairing is in progress.

• Turning the glasses

on

Press the power
button briefly. The
green LED is turned
on for 3 seconds.
(Make sure that 3D is
activated on the TV
before using the 3D glasses.)

• Turning the glasses off

Press the power button briefly. The red LED is turned
on for 3 seconds.

• Performing the pairing process

Turn the TV on and let it power up completely. Press
and hold the Power button on the glasses. The green
and the red LEDs blink alternately for 2 seconds.

• Operating range

Recommended pairing distance

If the red LED blinks every two seconds continually,
replace the battery with a new one.

Insert the "+" side of the battery into the side marked

✎

with "+" in the battery compartment.

To check the remaining battery capacity, refer to the

✎

pairing section in this manual.

Pull the battery cover

downward

Replace the battery Push the battery cover

Open the battery cover Remove the battery

downward

Close the battery cover

English - 16

Recommended viewing distance

Recommended viewing distance

Recommended pairing distance

Once the 3D glasses are paired, the remaining

✎

battery capacity is displayed on the TV screen. (This
feature only applies to Samsung F series 3D TVs and
3D glasses that have been available since 2013.)

If you keep trying to pair the glasses and the TV, the

✎

battery level will decrease significantly. However, the
battery level will recover to a certain degree in about
a minute.

2~6m (6.5 to 19.5 ft)

50 cm or less (19.5 in)

[PF5500-XE]BN68-04885H-04L05.indb 16 2013-11-13  5:12:38

The working distance depends on the existence of

✎

obstacles (a person, metal, walls, etc.) between the
glasses and the TV and the strength the Bluetooth
signal.

Turn off the 3D glasses while they are not in use. If

✎

you leave the 3D glasses on, the battery lifespan
decreases.

Pairing steps

Pairing is needed again in the following situations:

• If the 3D glasses do not function, even when the
power button is pressed, especially with a 3D TV
after a repair.

• If you want to play 3D content on another
Samsung 3D TV model that belongs to the D, E,
or F series released in 2011 through 2013. You
must pair the glasses with the other TV.

EnglishEnglish

1. Turn on the TV, and then move the glasses within

19.5 inches of the TV.

2. Press the power button on the 3D glasses briefly. The
3D glasses will power on and pairing will start.

3. The message “3D glasses are connected to TV.” will
be displayed on the TV screen when the pairing is
successfully completed.

• If pairing fails, the 3D glasses will power off.

• If the first attempt to pair fails, power the TV off
and on again and perform step 2.

• How to pair again: Press the power button on the
3D glasses for more than 1 second.

Watching 3D Video

Some 3D modes may not be available depending on the
format of the image source.

To watch in 3D, you must wear 3D Active Glasses and
turn the glasses on by pressing the power button.

1. Go to the 3D screen. (Picture > 3D)

2. Select the 3D Mode. The 3D Mode screen appears.

3. Set the 3D Mode of the image you want to view.

Troubleshooting

If you encounter... Try this...

Replace the battery.

My 3D glasses do not work.

The LED keeps blinking The battery is dead. Replace the battery.

The 3D glasses should be close to the TV. Make sure that the distance between
the TV and your 3D glasses is less than 19.5 feet (6m) in a straight line.

Check the 3D function settings of your TV.

Specifications (Model Number: SSG-5100GB )

Shutters Liquid crystal Transmittance 36±2%

Optics

Weight Glasses 21.5 g/.76 oz. (including the battery: 24.0±0.5 g/.85.±.018oz. )

Power Glasses One 3 V lithium/manganese dioxide battery 3 V(CR2025)

Power
consumption

Operating
conditions

Product specifications may be changed without notice in order to enhance product performance.

✎

The continuous operating time may differ depending on the wireless communication environment and

✎

Recommended
operating
distance

Glasses 0.85 mA (Average)

Battery

Operating
temperature

Custody
temperature

2 ~ 6 m (6.5 to 19.5 ft) Field Rate 120 fields/second

Type 165mAh, 3.0 V (CR2025)

Operating time 150 hours

50 °F ~ 104 °F (10°C ~ 40°C)

-4 °F ~ 113 °F (-20°C ~ 45°C)

usage conditions.

English - 17

[PF5500-XE]BN68-04885H-04L05.indb 17 2013-11-13  5:12:38

Recommendation - EU Only

Hereby, Samsung Electronics, declares that this 3D Active Glasses is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.

This equipment may be operated in all EU countries.

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely.

• Diagnose your TV

• Adjust the TV settings for you

• Perform a factory reset your TV

• Install recommended firmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is really pretty simple

1. Call Samsung

Contact Centre and

ask for remote support.

Password Change

2. Open the menu on

your TV and go to the

Support section.

3. Select Remote

Management and
Provide the Pin# to
the agent.

4. The agent will then
access your TV.

That's it!

Screen Menu > System > Change PIN

Change the TV's password.

1. Run Change PIN and then enter the current password in the password field. The default password is 0000.

2. Enter a new password and then enter it again to confirm it. The password change is complete.

If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “0-0-0-0”:

✎

For Standard Remote Control: In Standby mode: MUTE → 8 → 2 → 4 → POWER (on).

✎

For Smar t Touch Control: When the TV turns on: MUTE → Volume up → RETURN → Volume down →

✎

RETURN → Volume up → RETURN.

English - 18

[PF5500-XE]BN68-04885H-04L05.indb 18 2013-11-13  5:12:38

Troubleshooting and Other Information

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit
“www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

There is no picture/video. • Check the cable connections. Remove and reconnect all cables connected to the TV and external

The remote control does not work. • Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in the

The cable/set top box remote control
doesn’t turn the TV on or off or adjust the
volume.

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB

✎

(Samsung.com > Support > Downloads).

Some of above pictures and functions are available at specific models only.

✎

• Make sure the wall outlet is working.

• Try pressing the

refer to “Remote control does not work” below.

devices.

• Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV's
input connections. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source.

• Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

correct direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set-Top-Box user

manual for the SAMSUNG TV code.

P

button on the TV to make sure the problem is not the remote. If the TV turns on,

EnglishEnglish

English - 19

[PF5500-XE]BN68-04885H-04L05.indb 19 2013-11-13  5:12:38

Mounting the TV on the Wall Using the Wall Mount Kit
(Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer.
Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult,
and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount. We
recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do
it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you
select to install the wall mount on your own.

Wall Mount Kit Specifications (VESA)

The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the

✎

floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or
slanted wall, it may fall and result in severe personal injury.

NOTE

✎

− Standard dimensions for wall mount kits are shown in the table below.

− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are
provided.

− Do not use screws that do not comply with the VESA standard screw specifications.

− Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.

− For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.

− Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.

− Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.

− Do not mount the TV at more than a 15 degree tilt.

Product

Family

PDP-TV

Inch VESA Spec.(A * B) Standard Screw Quantity

51 400 X 400

M8 4

60 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.

English - 20

[PF5500-XE]BN68-04885H-04L05.indb 20 2013-11-13  5:12:38

Storage and Maintenance

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the

✎

debris of f before watching TV.

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen

✎

carefully using a soft cloth to prevent scratches.

EnglishEnglish

Do not spray water directly onto the product. Any liquid
that goes into the product may cause a failure, fire, or
electric shock.

Clean the product with a soft cloth dampened with a
small amount of water. Do not use a flammable liquid (e.g.
benzene, thinners) or a cleaning agent.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides,
etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts provided by

✎

Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury
caused by the product falling.

Installation with a stand. Installation with a wall-mount.

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

10 cm

Other Warnings

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

✎

English - 21

[PF5500-XE]BN68-04885H-04L05.indb 21 2013-11-13  5:12:39

Assembling the Cable manager

Eco Sensor and Screen Brightness

Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power
consumption. This causes the TV to brighten and dim automatically. If you want to turn this function off, go to Screen
Menu > System > Eco Solution > Eco Sensor

Do not block the sensor with any material. It can decrease picture brightness.

1. Eco Sensor: This power-saving feature automatically adjusts the screen brightness of the TV according to the

ambient light intensity detected by the Light Sensor.

2. To enable or disable Eco Sensor, go to Screen Menu > System > Eco Solution > Eco Sensor and select On or
Off.

3. Precaution: If you find the screen too dark while watching the TV in a dark area, this may be caused by the Eco
Sensor.

English - 22

[PF5500-XE]BN68-04885H-04L05.indb 22 2013-11-13  5:12:39

Tip Prevention – Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang on or destabilize the TV. Doing
so may cause the TV to tip over, causing serious injuries or death. Follow all
safety precautions provided in the Safety Flyer included with your TV. For
added stability and safety, you can purchase and install the anti-fall device
as described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly

installed onto the wall.

You may need additional material such as an anchor depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

✎

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto
the TV again.

Screws may not be supplied with the product. In this case, please purchase the screws of the following

✎

specifications.

Screw Specifications

✎

• For a 51 ~ 60 inches: M8

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.

NOTE

✎

− Install the TV near to the wall so that it does not fall backwards.

− It is safe to connect the string so that the clamps fixed on the wall are
equal to or lower than the clamps fixed on the TV.

− Untie the string before moving the TV.

4. Verify all connections are properly secured. Per iodically check the
connections for any sign of fatigue or failure. If you have any doubt about the
security of your connections, contact a professional installer.

EnglishEnglish

Wall

English - 23

[PF5500-XE]BN68-04885H-04L05.indb 23 2013-11-13  5:12:40

Specifications

Specifications - TV

Display Resolution 1920 x 1080 1920 x 1080 (Black & White)
Environmental Considerations

Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

Stand Swivel (Left / Right) -20˚ ~ 20˚
Sound

(Output) 10 W X 2

Model Name PS51F5505 PS60F5505

Screen Size
(Diagonal)

Dimensions (W x H x D)
Body
With stand

Weight
Without Stand
With Stand

Design and specifications are subject to change without prior notice.

✎

For information about the power supply, and more about power consumption, refer to the label attached to the

✎

51 inches 60 inches

1191.9 x 709.1 x 57.0 mm

1191.9 x 798.8 x 307.2 mm

18.5 kg

20.3 kg

product.

Typical power consumption is measured according to IEC 62087 Ed.2

✎

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing

1396.9 x 831.3 x 57.0 mm

1396.9 x 928.0 x 375.5 mm

27.5 kg

30.1 kg

Standby mode

To decrease power consumptionunplug the power cord when you don't use the TV for a long time.

Recommendation - EU Only

• Hereby, Samsung Electronics, declares that this PDP TV is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.

• The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product
Support and enter the model name.

• This equipment may only be used indoors.

• This equipment may be operated in all EU countries.

English - 24

[PF5500-XE]BN68-04885H-04L05.indb 24 2013-11-13  5:12:40

Guides

Licences

User Instructions

• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes

as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image
retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent

hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the
product. However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding

environment such as temperature or humidity. This is normal and not a defect of the unit.

• Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated

technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no
impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD
or a game console may cause similar effects to the screen. Damages caused by the above effect are not
covered by the Warranty.

EnglishEnglish

• After-images on the Screen
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-

images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

• Caution

The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care.
When moving the TV, always have two or more people pick it up and carry it as a safety precaution. Do not lay the

TV flat on its face or back.

Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of
its glass panel and component parts during shipment. It is, nonetheless, a fragile piece of electronics that requires
careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking the
TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp
impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer's warranty.

English - 25

[PF5500-XE]BN68-04885H-04L05.indb 25 2013-11-13  5:12:41

Viktiga säkerhetsanvisningar

Varning! Viktiga säkerhetsanvisningar

(Läs överensstämmande avsnitt enligt märket på din produkt från Samsung innan du försöker installera produkten.)

VARNING!

RISK FÖR ELSTÖT. ÖPPNA INTE

VARNING! FÖR ATT UNDVIKA RISK FÖR ELSTÖTAR SKALL DU
INTE TA BORT (ELLER FÖRA TILLBAKA) SKYDDET. DET FINNS

INGA DELAR DU KAN BYTA INUTI. ÖVERLÅT REPARATIONER

TILL BEHÖRIG SERVICEPERSONAL.

• Facken och öppningarna i kåpan och på bak- och undersidan är till för erforderlig ventilation. För att säkerställa tillförlitlig användning av den här
apparaten och skydda den från överhettning får facken och öppningarna aldrig täckas över eller täppas till.

− Placera inte apparaten i ett trångt utrymme, exempelvis en bokhylla, eller ett inbyggt skåp, där ventilationen inte är tillräcklig.

− Placera inte den här apparaten nära eller över ett element eller värmeaggregat, eller där den utsätts för direkt solljus.

− Placera behållare med vatten (vaser etc.) på den här apparaten, eftersom det kan orsaka brandrisk eller risk för elektrisk kortslutning.

• Utsätt inte apparaten för regn och placera den inte på en plats nära vatten (vid ett badkar, tvättställ, köksvask eller tvättmaskin, i en fuktig källare,
nära en swimmingpool etc.) Om den här apparaten blir våt ska du koppla ur den och kontakta en auktoriserad återförsäljare direkt. Se till att dra ur
strömsladden från uttaget före rengöring.

• Den här apparaten går på batterier. Det kan finnas regler i din kommun som kräver att du gör dig av med de här batterierna på rätt sätt och enligt
gällande miljölagstiftning. Kontakta din lokala kommun för information om avyttring och återvinning.

• Överbelasta inte vägguttag, förlängningssladdar eller adaptrar eftersom detta kan medföra brandfara eller elstötar.

• Strömsladdar ska dras så att de inte trampas på eller kläms av föremål som placeras på eller mot dem. Var speciellt uppmärksam vid eluttagen och

anslutningspunkterna på bildskärmen.

• Koppla bort apparaten från eluttaget och dra ut sladdarna för att ytterligare skydda bildskärmen under åskväder eller när den lämnas oövervakad
och oanvänd under långa perioder. Det förhindrar att utrustningen skadas på grund av blixtnedslag eller strömrusning.

• Innan du ansluter växelströmssladden till ett likströmsuttag, ska du se till att spänningen för likströmsadaptern överensstämmer med lokal eltillförsel.

• För aldrig in några metallföremål i öppningarna på den här apparaten. Om du gör det kan det orsaka skada till följd av elektrisk kortslutning.

• För att undvika elektrisk kortslutning ska du aldrig röra vid apparatens insidor. Endast en kvalificerad tekniker ska öppna den här apparaten.

• Se till att koppla in strömsladden tills den sitter fast ordentligt. När du tar bort strömsladden ska du se till att hålla i strömkontakten när du drar ut den

ur uttaget. Rör inte vid strömsladden med våta händer.

• Om den här apparaten inte fungerar normalt - speciellt om det förekommer ovanliga ljud eller lukter från den - ska du omedelbart koppla ur den och
kontakta en auktoriserad återförsäljare eller ett servicecenter.

• Se till att dra ur strömkontakten ur uttaget om TV:n inte ska användas på länge eller om du ska åka från huset länge (speciellt när barn, äldre och
handikappade ska vara ensamma hemma).

− Ansamlingar av damm kan orsaka elektrisk kortslutning, elavbrott eller brand på grund av att strömsladden genererar flammor och hetta, eller att
isoleringen försämras.

• Kontakta ett auktoriserat servicecenter när du skall installera din utrustning på en plats som är dammig, har höga eller låga temperaturer, hög
luftfuktighet, har kemisk påverkan eller där den används dygnet runt, som exempelvis på en tågstation etc.

• Försummelse mot detta kan orsaka allvarliga skador på din utrustning.

• Använd en jordad kontakt och sladd.

− Felaktig jordning kan orsaka elektrisk kortslutning eller skada på utrustningen. (Endast utrustning av klass l.)

• Om du vill koppla ur apparaten från strömkällan måste kontakten dras ut ur eluttaget och därför måste den vara lätt att komma åt.

• Låt inte barn hänga på produkten.

• Förvara tillbehör (batteri etc.) på en plats där det är oåtkomligt för barn.

• Installera inte produkten på en instabil plats, såsom en skakig hylla, ett golv som lutar eller en plats som är utsatt för vibrationer.

• Tappa inte och utsätt inte produkten för stötar. Om produkten skadas ska du koppla ur strömsladden och kontakta ett servicecenter.

• Koppla ur strömsladden från uttaget och torka av produkten med en mjuk och torr trasa. Använd inga kemikalier, såsom vax, bensen, alkohol, tinner,

insektsmedel, luftrenare, smörjmedel eller rengöringsmedel. Detta kan skada produkten eller radera trycket på den.

• Apparaten ska inte utsättas för dropp eller skvättningar.

• Kasta inte batterierna i eld.

• Var försiktig så du inte kortsluter, plockar isär eller överhettar batterierna.

• Risk för explosion om batteriet byts på fel sätt. Byt bara mot samma eller liknande typ.

• VARNING - FÖR ATT FÖRHINDRA RISK FÖR BRAND, SKA DU ALLTID FÖRVARA LJUS OCH ANDRA ÖPPNA ELDLÅGOR PÅ AVSTÅND FRÅN

PRODUKTEN.

• Utrustning som ar kopplad till skyddsjord via jordat vagguttag och/eller via annan utrustning och samtidigt ar kopplad till kabel-TV nat kan i vissa fall
medfőra risk főr brand. Főr att undvika detta skall vid anslutning av utrustningen till kabel-TV nat galvanisk isolator finnas mellan utrustningen och
kabel-TV natet.

Den här symbolen visar att det är hög spänning
på insidan. Det är farligt att komma i kontakt
med produktens insida.

Den här symbolen anger att det finns viktig
dokumentation som medföljer produkten
angående dess funktion och underhåll.

Svenska - 2

[PF5500-XE]BN68-04885H-04L05.indb 2 2013-11-13  5:12:41

Siffror och bilder i den här bruksanvisningen är endast för referens och kan skilja sig från den verkliga produkten.
Produktdesign och -specifikationer kan ändras utan föregående meddelande.

CIS-språken (ryska, ukrainska, kazakstanska) är inte tillgängliga för den här produkten, eftersom den har tillverkats för
kunder inom EU-området.

Funktioner hos din nya TV

• 3D: Den här nya funktionen gör det möjligt för dig att titta på 3D-innehåll.

• SMART HUB:
Denna TV är utrustad med Smart Hub, ett familjeunderhållningssystem och familjecenter. Med Smart Hub

kan användarna surfa på webben, hämta program och hålla kontakten med familj och vänner genom sociala
nätverkstjänster. Dessutom kan du titta och lyssna på bild-, video- och musikfiler som finns lagrade på externa
lagringsenheter.

™ Tryck för att starta Smart Hub. Välj en tjänst med ikonerna som visas längst upp på skärmen.

Social TV: Se de senaste YouTube-filmerna och publicera eller låt vännerna publicera filmer på Facebook och
Twitter. Du kan också ringa videosamtal till vänner genom att ansluta TV:n till en kamera (säljs separat).

Appar: Hämta och installera program, såsom WebBrowser.
På TV: Se en lista över program som sänds och ska sändas. (landsberoende)
Film och TV-serier:Köp och titta på filmer och serier utan en separat extern enhet. (landsberoende)
Mina foton, videor och musik: Spela upp bild-, video- och musikfiler från en extern lagringsenhet.

Svenska

• Anynet+ (HDMI-CEC): Detta gör det möjligt för dig att styra alla anslutna enheter från Samsung som stöder
Anynet+ med din TV-fjärrkontroll från Samsung.

• e-Manual: Erbjuder en detaljerad bruksanvisning på skärmen för din TV. (sidan 13)

• Röstigenkänning: Med Röstigenkänning kan du få åtkomst till och styra specifika funktioner för TV:n med
röstkommandon.

• Enhetshanterare: Använd TV-funktionerna med ett USB- eller Bluetooth-tangentbord och en mus.

• Skärmspegling: Visar skärmen för mobil enhet på din TV trådlöst.

Korrekt avfallshantering av produkten (&Elektriskt och elektroniskt avfall)
(Tillgängligt i länder med separata insamlingssystem)

Märkningen på produkten, tillbehören eller dokumentationen anger att produkten och dess elektroniska tillbehör (t.ex. laddare, headset,
USB-kabel) inte får slängas i hushållssoporna vid livsslut. För att förhindra skada på miljön eller den mänskliga hälsan är det viktigt att
sortera utrustningen från andra typer av avfall.

Hemmaanvändare skall antingen kontakta sin återförsäljare, eller den lokala renhållningsmyndigheten för att få information om hur och
var de kan göra sig av med produkten på ett säkert sätt.

Företagsanvändare skall kontakta sina leverantörer och kontrollera vilka regler som anges på köpekontraktet. Den här produkten och
dess elektroniska tillbehör får inte blandas med andra kommersiella avfallstyper.

Korrekt avfallshantering av batterierna i produkten
(Tillgängligt i länder med separata insamlingssystem)

Märkningen på batteriet, bruksanvisningen eller förpackningen anger att batteriet i den här produkten inte får slängas bland
hushållssoporna vid livsslut. Om märkning med de kemiska symbolerna Hg, Cd eller Pb finns anger det att batteriet innehåller
kvicksilver, kadmium eller bly som överskrider referensnivåerna enligt EU-direktivet 2006/66. Om batterierna inte avfallshanteras på rätt
sätt kan de orsaka skador på miljön och på den mänskliga hälsan.

För att skydda våra naturresurser och främja återvinning ska batterierna lämnas till det lokala batteriinsamlingssystemet.

Svenska - 3

[PF5500-XE]BN68-04885H-04L05.indb 3 2013-11-13  5:12:41

Tillbehör

Försäkra dig om att följande delar följer med din TV. Kontakta din återförsäljare om det saknas något.

✎

Delarnas färg och form kan variera beroende på modell.

✎

Kablar som inte medföljer i förpackningen kan köpas separat.

✎

Kontrollera att det inte finns några dolda tillbehör i förpackningsmaterialet när du öppnar kartongen.

✎

VARNING! MONTERA ORDENTLIGT SÅ ATT ENHETEN INTE LOSSNAR

[

• Smart Touch Control & batterier (AAA x 2) • Strömsladd

• Fjärrkontroll & batterier (AAA x 2) • Samsung 3D-glasögon (40 tums modell och högre)

• Bruksanvisning • Regelguide

• Garantibevis (Inte tillgängligt på alla platser)

Ferritkärna (4EA) IR-förlängningskabel Kabelhanterare

• En administrationsavgift kan tillkomma om

− (a) en tekniker tillkallas och det inte finns något fel på produkten
(om du inte har läst den här bruksanvisningen)

− (b) du tar med produkten till ett reparationscenter och det inte finns något fel på produkten
(om du inte har läst den här bruksanvisningen)

• Beloppet på en sådan administrationsavgift informeras före arbetet sker eller hembesöket görs.

Svenska - 4

[PF5500-XE]BN68-04885H-04L05.indb 4 2013-11-13  5:12:41

Ferritkärna för strömkabel: Ferritkärnorna används för att skydda kablarna

✎

mot störningar. När du ansluter en kabel öppnar du ferritkärnan och klämmer
den runt kabeln nära kontakten så som visas på bilden.

• Maximalt avstånd mellan ferritkärnan och änden av kabeln som sitter i TV:

tum

3/4

A

Ferritkärna: Ferritkärnorna används för att skydda kablarna mot störningar.

✎

När du ansluter en kabel öppnar du ferritkärnan och klämmer den runt
kabeln nära kontakten så som visas på bilden.

• Använd en Kategori 7-kabel som nätverkskabel.

Varning: Skärmen kan skadas från direkt tryck
vid felaktig hantering. Vi rekommenderar att
du lyfter TV:n i kanterna, så som visas på
bilden.

Rör ej
Den här skärmen!

Strömsladd

Antennkabel /

Komponentkabel

(säljs separat)

Svenska

Nätverkskabel
(säljs sepa rat)

Svenska - 5

[PF5500-XE]BN68-04885H-04L05.indb 5 2013-11-13  5:12:42

Grundfunktioner

Använda Smart Touch Control

Modellberoende.

✎

Du kan använda MIK:en för att erbjuda Röstigenkänning kommandon. Tryck bara på knappen VOICE˜.

Funktionen Röstigenkänning kan påverkas av otydligt uttal, låg röstnivå och omgivande ljud.

✎

Slår på och stänger av TV:n.

Visar och väljer tillgängliga videokällor.

Slå på och stäng av satellit- eller kabelboxen
som är ansluten till TV:n. På grund av detta
måste Smart Touch Control konfi gureras som en
universalfjärrkontroll.

VOICE˜

Använd röstkommanot och ange text genom
röststyrning.

Slår på och stänger av TV:ns

Tryck på och håll ned

denna knapp för att välja

Ljudbeskrivning och

Undertext. (Beroende på land

Växlar denna knapp mellan Rekommenderad och

Färgerna på knapparna fungerar på olika sätt,

beroende på funktionen som TV:n utför just nu.

Håll in knappen { när du tittar på TV för att visa

information om det aktuella programmet.

Återgår till föregående meny. Håll den här knappen

nedtryckt för att avsluta alla program som körs.

MUTE

ljud.

eller region.)

Justerar volymen.

Sök.

Ansluta till TV:n

För att använda TV:n med en Smart Touch Control måste du först para ihop TV:n via Bluetooth. Smart Touch Control är dock bara tillgängligt för den hopparade
Samsung-TV:n.

Vi rekommenderar att du använder Smart Touch Control på kortare avstånd än 6 m. Användningsavståndet kan variera beroende på den trådlösa

✎

miljöns förhållanden.

1. När TV:n är avstängd riktar du Smart Touch Control mot TV:ns mottagare för fjärrkontrollen och trycker på knappen för den första hopparningen. Endast
dessa knappar skickar en IR-signal. Positionen för fjärrkontrollen kan variera beroende på modell.

2. En Bluetooth-ikon visas längst ned till vänster på skärmen enligt nedan. TV:n försöker sedan ansluta till Smart Touch Control automatiskt.

Stänger av ljudet tillfälligt.

Visar en virtuell fjärrkontroll på skärmen. Se kapitlet
e-Manual, Styra TV:n > Använda Virtual Remote

Control.

Håll knappen MORE nedtryckt för att enkelt välja
önskad funktion (t.ex. MENU (m), TOOLS (T),

INFO (`), etc.).

Pekplatta

• Dra över pekplattan för att fl ytta fokus på
skärmen.

• Tryck på pekplattan för att köra, aktivera eller
välja det markerade alternativet.

• Tryck på och håll ned pekplattan för att visa
Kanallista.

Visa varje digital kanals programmeringsschema,
inklusive visningstider. Ställer dessutom in
en Schemalägg visning eller Schemalägg
inspelning genom att du trycker på styrplattan på
programposten schemalagd för senare visning.

Startar Smart Hub-programmen. Se kapitlet
e-Manual, SMART TV-funktioner > Smart Hub.

För att stänga ett program som körs enkelt

✎

trycker du på knappen ™.

<Försöka att ansluta och slutförandeikoner>

Återansluta Smart Touch Control

<Hopparningsknapp för Smart Touch Control>
Om Smart Touch Control slutar att fungera eller inte fungerar som den ska, ska du byta ut batterierna eftersom problemen kan orsakas av för

lite batteristyrka. Om problemet kvarstår ska du trycka på PAIRING -knappen på Smart Touch Control för att återställa hopparningen med
TV:n. Du kommer åt PAIRING -knappen genom att ta bort batteriluckan för Smart Touch Control. På ett avstånd mellan 30 cm och 4 m ska du
rikta Smart Touch Control mot TV-mottagaren och trycka på knappen PAIRING. När hopparningen är klar visas hopparningsbilden längst ner
till vänster på TV-skärmen.

Svenska - 6

[PF5500-XE]BN68-04885H-04L05.indb 6 2013-11-13  5:12:43