Connecting to the External Devices
ENG
“MONITOR OUT” are used for the equipment with an RGB output, such as
video game devices or video disc players.
Rear of the TV
(Input/Output)
or
①
This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (VIDEO + AUDIO-L/R)
②
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to
“AV 1, AV 2, AV 3”
“AV 1, AV 2, AV 3”
③
When you wish to record a programme, connect the receiver to
“MONITOR OUT”
Input/Output Specification
and the target VCR to
to
“MONITOR OUT”
so that you can redirect the signal from
“MONITOR OUT”
.
“AV 1, AV 2, AV 3”
so that you can redirect the signal from
①
“AV 1, AV 2, AV 3”
②
Video game device
Video disc player
Satellite receiver
③
and the VCR to
to
“MONITOR OUT”
VCR
DVD
Decoder /
.
Connector
Video Audio (L/R) S-Video RGB Video + Audio (L/R)
Ext.1 ✔✔ ✔✔ Only TV output is available.
Ext.2 ✔✔ ✔ Output you can choose.
Ext.3 ✔✔ ✔ Output you can choose.
Input Output
Rear of the TV
(Input/Output)
Camcorder
Video disc player
Video game device
1
ENG
Connecting to the S-Video Input
The S-VIDEO1 and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Rear of the TV
①
and
Camcorder
Side of the TV
①
and
①
To play picture and sound, both the S-VIDEO and RCA connectors must be used.
Whenever you connect an audio or video system to your television,
☛
ensure that all elements are switched off. Refer to the documentation
supplied with your equipment for detailed connection instructions
and associated safety precautions.
VCR
2