QUICK SETUP GUIDE
The Supplied Accessoris
PDP TV
Owner’s Instructions Remote Control/
Holder-Wire Cable Screw (4ea) Cover-Bottom
Ferrite Core for
Power Cord
AAA Batteries (2ea)
(PS50B650 only)
Ferrite Core for
Headphone
Installing Batteries in the Remote Control
Power Cord Cloth-Clean
Cover-Bottom / Screws (2ea)
(PS58B680 / PS63B680 only)
Program CD Holder-Ring (4ea)
English - 1
Installing the Stand
Front
Front
Back
Step 1 Step 2 Step 3
Step 1. Attach your PDP TV to the stand.
Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury.
N
Two or more people should carry the TV. Never lay the TV on the oor because of possible damage to the screen.
N
Always store the TV upright.
Step 1. Using the 4 screws for securing the stand base and the monitor, rmly attach the monitor to the stand base. (The exterior of
the set may be different than the picture.)
Step 3. In case of installing your TV on the wall, close the cover 1 on the stand-base connection part using two screws for hiding.
Back
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
Using the remote control buttons
MENU Button
Displays the favourites channel list.
ENTERE / Direction Button
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
English - 2
RETURN Button
Returns to the previous menu
EXIT Button
Exit the on-screen menu