Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/global/register
Model |
|
Serial No. |
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country |
Customer Care Centre |
Web Site |
|
AUSTRALIA |
1300 362 603 |
www.samsung.com/au |
|
|
|
|
|
CHINA |
800-810-5858 |
www.samsung.com.cn |
|
010-6475 1880 |
|||
|
|
||
HONG KONG |
3698-4698 |
www.samsung.com/hk |
|
|
|
|
|
INDIA |
3030 8282 |
www.samsung.com/in/ |
|
1800 110011 |
|||
|
|
||
INDONESIA |
0800-112-8888 |
www.samsung.com/id |
|
|
|
|
|
JAPAN |
0120-327-527 |
www.samsung.com/jp |
|
|
|
|
|
MALAYSIA |
1800-88-9999 |
www.samsung.com/my |
|
|
|
|
|
NEW ZEALAND |
0800SAMSUNG(726-7864) |
www.samsung.com/nz |
|
|
|
|
|
PHILIPPINES |
1800-10-SAMSUNG(726-7864) |
www.samsung.com/ph |
|
|
|
|
|
SINGAPORE |
1800-SAMSUNG(726-7864) |
www.samsung.com/sg |
|
|
|
|
|
THAILAND |
1800-29-3232 |
www.samsung.com/th |
|
02-689-3232 |
|||
|
|
||
TAIWAN |
0800-329-999 |
www.samsung.com/tw |
|
|
|
|
|
VIETNAM |
1 800 588 889 |
www.samsung.com/vn |
|
|
|
|
|
SOUTH AFRICA |
0860-SAMSUNG(726-7864) |
www.samsung.com/za |
|
|
|
|
|
U.A.E |
800-SAMSUNG (726-7864) |
www.samsung.com/mea |
|
8000-4726 |
|||
|
|
BN68-01447K-01
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Warranty
-Warranty does not cover any damage caused by image retention.
-Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
English - 2
Contents |
|
General Information |
|
User Instructions............................................. |
2 |
Checking Parts................................................ |
4 |
Using the Stand-Base..................................... |
4 |
Control Panel .................................................. |
5 |
Connection Panel............................................ |
6 |
Viewing the Remote Control ........................... |
8 |
Operation |
|
Switching Your Television On and Off ............. |
9 |
Viewing the Menus.......................................... |
9 |
Plug & Play Feature...................................... |
10 |
Using the TOOLS Button .............................. |
12 |
Viewing External Signal Sources.................. |
12 |
Editing Device Names................................... |
13 |
Storing Channels Automatically .................... |
14 |
Storing Channels Manually........................... |
15 |
Channel Control |
|
Viewing the EPG (Electronic Programme |
|
Guide) Information ........................................ |
16 |
Viewing All Channels .................................... |
17 |
Erasing and Adding Channels....................... |
18 |
Setting Your Favourite Channels .................. |
19 |
Reserving a Program (Time Viewing) ........... |
20 |
Confirming a Viewing Reservation................ |
21 |
Assigning Names to Channels...................... |
22 |
Sorting the Stored Channels......................... |
23 |
Selecting and Deselecting All Channels ....... |
24 |
Storing Channels in Memory (Auto Store) .... |
24 |
Setting the Channel Mode ............................ |
24 |
Locking Channels ......................................... |
25 |
Fine Tuning Analog Channels....................... |
25 |
Viewing Signal Information ........................... |
26 |
LNA (Low Noise Amplifier) ............................ |
26 |
Picture Control |
|
Changing the Picture Standard..................... |
27 |
Customizing the Picture Settings.................. |
27 |
Configuring Detailed Settings on the Picture.... |
28 |
Picture Options ............................................. |
29 |
Resetting the Picture Settings to the |
|
Factory Defaults............................................ |
31 |
Sound Control |
|
Sound Features ............................................ |
32 |
Selecting the Sound Mode |
|
(depending on the moel)............................... |
34 |
Connecting Headphones (Sold separately)... |
34 |
Symbols
Press
|
|
|
English |
Function Description |
|
||
|
|
|
|
Time Features............................................... |
35 |
|
|
Change PIN / Parental Lock / Subtitle / |
|
|
|
Teletext Language / Preference / Melody / |
|
|
|
................Entertainment / Energy Saving / PIP |
37 |
|
|
Upgrading the Software ................................ |
40 |
|
|
|
|
|
|
PC Display |
|
|
|
Setting up Your PC Software |
|
|
|
(Based on Windows XP)............................... |
41 |
|
|
Input Mode (PC)............................................ |
42 |
|
|
Setting the PC............................................... |
43 |
|
|
|
|
|
|
WISELINK |
|
|
|
Using the WISELINK Function...................... |
45 |
|
|
Using the WISELINK Menu........................... |
47 |
|
|
Using the PHOTO (JPEG) List...................... |
48 |
|
|
Viewing a Photo or Slide Show..................... |
54 |
|
|
Using the Music List...................................... |
60 |
|
|
Playing a Music File...................................... |
67 |
|
|
Using the Setup Menu .................................. |
69 |
|
|
|
|
|
|
About Anynet+ |
|
|
|
What is Anynet+?........................................... |
71 |
|
|
Connecting Anynet+ Devices......................... |
71 |
|
|
Setting Up Anynet+........................................ |
72 |
|
|
Scanning and Switching between |
|
|
|
Anynet+ Devices........................................... |
72 |
|
|
Recording...................................................... |
73 |
|
|
Listening through a Receiver ........................ |
74 |
|
|
Check Points before Requesting Service ..... |
74 |
|
|
|
|
|
|
Appendix |
|
|
|
Teletext Feature (depending on the model) .. |
75 |
|
|
Wall Mount Kit Specifications (VESA)........... |
77 |
|
|
Auto Wall-Mount Adjustment |
|
|
|
(Sold separately)........................................... |
78 |
|
|
Preparing before installing WallMount on the |
|
|
|
wall................................................................ |
79 |
|
|
How to assemble the Stand-Base |
|
|
|
(depending on the model)............................. |
79 |
|
|
Securing the TV to the Wall .......................... |
80 |
|
|
Troubleshooting ............................................ |
81 |
|
|
Specifications................................................ |
82 |
|
|
®
Important Note
English - 3
Owner’s Instructions |
Remote Control/ |
Power Cord |
Cloth-Clean |
Warranty Card/ |
|
AAA Batteries |
|
|
Safety Guide Manual |
|
|
|
|
(Not available in |
|
|
|
|
all locations.) |
Cover-Bottom / Screws (2ea) |
Ferrite Core for |
Ferrite Core for |
Ferrite Core for |
(Refer to page 79) |
Power Cord |
S-Video |
Component |
Sold Separately
Antenna Cable |
Component Cables |
Audio Cables |
PC Cable |
Scart Cable |
PC Audio Cable |
HDMI Cable |
HDMI/DVI Cable |
® Ferrite Core (Power Cord, S-Video, Component)
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near the plug.
®® Two or more people
should carry the PDP. Never lay the PDP on the
floor because of possible damage to the screen.
Always keep the PDP upright.
The PDP can rotate 20
-20° ~ 20°
degrees in right and left directions.
English - 4
Front Panel
|
Front Panel buttons |
® The product colour and shape may vary depending on the model. |
Touch each button to |
operate. |
1SOURCE
Displays a menu of all of the available input sources (TV, AV1, AV2, S-Video, Component 1, Component 2, PC, HDMI1, HDMI2/DVI, HDMI3, USB).
®In the on-screen menu, use this button as you would use the ENTER button on the remote control.
2MENU
Press to see an on-screen menu of your TV’s features.
3+ VOL -
Press to increase or decrease the volume. In the on-screen menu, use the + VOL - buttons as you would use the ◄ and ► buttons on the remote control.
4CH
Press to change channels.
In the on-screen menu, use the CH
buttons as you would use the ▲ and ▼ buttons on the remote control.
5POWER INDICATOR
Blinks and turns off when the power is on and lights up in stand-by mode.
6 POWER
Press to turn the TV on and off.
7REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8 SPEAKERS
English - 5
Rear Panel
1
9
or
Cable Television
Network
or
2 |
3 |
4 |
5 |
6 |
7 |
8 |
®The product colour and shape may vary depending on the model.
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 |
POWER IN |
5 |
DIGITAL AUDIO OUT (OPTICAL) |
|
Connect the supplied power cord. |
|
Connect to a Digital Audio Component. |
2 |
AV IN 1(VIDEO / AUDIO R/L) |
6 |
AUDIO OUT(AUDIO R/L) |
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio signals from the TV to an external source, such as Audio equipment.
3 |
PC IN(PC) / AUDIO |
7 SERVICE |
||
− |
Connector for service. |
|||
|
Connect to the video and audio output jack on |
|||
|
− |
Connect the serial jack between the |
||
|
your PC. |
|||
|
|
electro-motion wall mount bracket and your |
||
4 |
COMPONENT IN 1, COMPONENT IN 2 |
|
Audio (AUDIO L/R) and video (Y, Pb, Pr) |
TV when you want to adjust the TV viewing |
|
angle using your remote control. |
||
inputs for Component. |
||
|
Continued...
English - 6
8 HDMI IN 1,2 |
DVI IN(HDMI2) AUDIO L/R |
|
|
|
|||||
- No additional Audio connection is needed |
DVI audio outputs for external devices. |
|
|||||||
for an HDMI to HDMI connection. |
|
|
|
|
|
|
|
|
|
- When using an HDMI/DVI cable connection, |
9 ANT IN |
|
|
|
|
|
|
|
|
you must use the HDMI IN 2 jack. |
75Ω Coaxial connector for Aerial/Cable |
|
|||||||
®What is HDMI? |
Network. |
|
|
|
|
|
|
|
|
- “High Definition Multimedia interface” |
Supported modes for HDMI/DVI and Component |
||||||||
allows the transmission of high definition |
|||||||||
digital video data and multiple channels |
|
480i |
480p |
576i |
576p |
720p |
1080i |
1080p |
|
of digital audio. |
HDMI/DVI 50Hz |
X |
X |
X |
O |
O |
O |
O |
|
HDMI/DVI 60Hz |
X |
O |
X |
X |
O |
O |
O |
||
- The HDMI/DVI terminal supports DVI |
|||||||||
Component |
O |
O |
O |
O |
O |
O |
O |
||
connection to an extended device with |
|||||||||
|
|
|
|
|
|
|
|
||
the appropriate cable (not supplied). The |
|
|
|
|
|
|
|
|
|
difference between HDMI and DVI is that |
|
|
|
|
|
|
|
|
|
the HDMI device is smaller in size, has |
|
|
|
|
|
|
|
|
|
the HDCP (High Bandwidth Digital Copy |
|
|
|
|
|
|
|
|
|
Protection) coding feature installed, and |
|
|
|
|
|
|
|
|
|
supports multi - channel digital audio. |
|
|
|
|
|
|
|
|
Side Panel
1
2
3
or
4
® The product colour and shape may vary depending on the model.
1 HDMI IN 3 |
3 S-VIDEO or VIDEO / AUDIO L/R |
Connect to the HDMI jack of a device with |
Video (S-Video or Video) and audio inputs |
HDMI output. |
for external devices, such as a camcorder or |
2 WISELINK |
VCR. |
Connect a USB mass storage device to view |
4 HEADPHONES JACK |
photo files (JPEG) and play audio files (MP3). |
You can connect a set of headphones if you |
|
wish to watch a television programme without |
|
disturbing the other people in the room. |
|
®®Prolonged use of headphones at a high |
|
volume may damage your hearing. |
English - 7
The performance of the remote control may be affected by bright light.
1POWER button
(turns the TV on and off)
2 Selects the TV mode directly
3Number buttons for direct channel access
4One or more digit channel selection
5 Temporary sound switch-off
6 Volume increase
Volume decrease
7Electronic Program Guide (EPG) display
8Use to quickly select frequently used functions.
9Control the cursor in the menu
0Use to see information on the current broadcast
!Use these buttons in the Channel list and WISELINK, etc.
#Press to select the optional display and sound modes for sports, cinema and games.
$VCR/DVD Function (Rewind, Stop, Play/Pause, Fast/ Forward)
% Available source selection ^ Previous channel
& Next channel
Previous channel
*Displays the main on-screen menu
(This function enables you to view and play photo (JPEG) and audio files (MP3) from an external device. (See page 48 (JPEG), 60 (MP3))
)Returns to the previous menu
a Exit the on-screen menu b Picture size selection
cUse this when connecting a SAMSUNG DMA (Digital
Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.)
For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)" is “On” (see page 72)
d Digital subtitle display e Channel control button (Refer to page 17)
Teletext Functions
(Refer to page 75)
2 Exit from the teletext display (depending on the model)
7 Teletext store
8 Teletext size
0 Teletext reveal
! Fastext topic selection
@Teletext display/mix both teletext information and the normal broadcast
%Teletext mode selection (LIST/FLOF)
^ Teletext sub page
&P : Teletext next page
P : Teletext previous page
* Teletext index ) Teletext hold a Teletext cancel
Continued...
English - 8
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
®® Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
Do not mix battery types, i.e. alkaline and manganese.
3Close the cover as shown in the figure.
®®Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet
from the TV. (Assuming typical TV usage, the batteries last for about one year.)
®®If the remote control doesn’t work! Check the following:
1.Is the TV power on?
2.Are the plus and minus ends of the batteries reversed?
3.Are the batteries drained?
4.Is there a power cut, or is the power cord unplugged?
5.Is there a special fluorescent light or a neon sign nearby?
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
®®The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the (Power) button (On/Off) on the front of the television or press the POWER button on the remote control to switch the television on. The channel that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 15.
®®If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Plug & Play Feature” on page 10.
3To switch the television off, press the (Power) button (On/Off) on the front of the television or press the POWER button on the remote control.
4To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER button or number buttons on the remote control.
1Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons: Picture, Sound, Channel, Setup, Input, and Application
2Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu.
3Press the ▲ or ▼ button to move to items in the menu. Press the ENTER button to enter items in the menu.
4Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu.
5Press the EXIT button to exit from the menu.
Picture
Mode |
: Standard |
Cell Light |
: 7 |
Contrast |
: 95 |
Brightness |
: 45 |
Sharpness |
: 20 |
Colour |
: 50 |
Tint (G/R) |
: G50/R50 |
Detailed Settings |
|
English - 9
When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
®The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
1If the television is in standby mode, press the POWER button on the remote control. The message The menu
Language, Store Demo, Channels and Time will be set. is displayed.
2Press the ENTER button to confirm your choice.
The message Select ‘Home Use’ when installing this TV in your home. is displayed.
3Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER button. The message to
check the connected status of the antenna is displayed. ®®The default selection is Home Use.
®®We recommend setting the TV to Home Use mode for the best picture in your home environment.
®®Store Demo mode is only intended for use in retail environments.
®®If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on the TV.
When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select Start.
Digital & Analogue: Digital and Analog channels. Digital: Digital channels.
Analogue: Analog channels.
The channel search will start and end automatically. Press the ENTER button at any time to interrupt the memorization process.
After all the available channels are stored, the message
Set the Clock Mode is displayed.
Plug & Play
The menu Language, Store Demo, Channels and Time will be set.
OK
Entrer
Plug & Play
Select 'Home Use' when installing this TV in your home.
|
Store Demo |
Home Use |
|
|
|
|
|
|
|
|
Move |
|
|
|
Enter |
||
|
Plug & Play |
|
|
|
|
|
|
|
|
Select the channel source to memorize. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital &Analogue |
|
|
|
|
Start |
|
|
|
Digital |
|
|
|
|
Start |
||
|
Analogue |
|
|
|
|
Start |
||
|
Move |
Enter |
|
|
|
Skip |
||
|
|
|
|
|||||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
Plug & Play |
|
|
|
|
|
|
|
Auto Store in progress. |
|
Channel 6 |
||||||
Digital Channels: 0 |
|
|
|
|
|
|
|
|
Analogue Channels : -- |
|
|
|
|
|
|
|
|
|
|
|
3% |
|
|
|||
|
|
|
|
|
|
|
|
|
|
Stop |
|
|
|
|
|
|
|
|
|
Enter |
|
|
|
Skip |
||
|
|
|
|
|||||
|
|
|
|
Plug & Play
Auto Store is completed.
Digital channels: 20
Analogue channels: 36
OK
Enter |
|
|
|
Skip |
|
|
Continued...
English - 10
®To stop the search before it has finished, press the ENTER button with stop selected.
Press the ◄ or ► button to select Yes, then press the ENTER button. The Auto Store menu then reappears. Press the ENTER button when channel memorization is complete.
Plug & Play
Set the Clock Mode.
Clock Mode |
: Auto |
|
|
|
|
|
|
Manual |
|
|
|
|
|
|
Move |
Enter |
|
|
|
Skip |
|
|
|
||||
|
|
|
5The message Set the Clock Mode is displayed. Press the ENTER button. Press the ▲ or ▼ button to select Manual for setting the current time manually, then press the ENTER button. The message Set current date and
time. is displayed.
®®If you select Auto, Select the time zone where you are located. is displayed, then go to step 8.
6Press the ◄ or ► button to move to Day, Month, Year, Hour or Minute Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER
button.
®®You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control directly by pressing the number buttons on the remote control.
7The message Enjoy your viewing. is displayed. When you have finished, press the ENTER button.
®®Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
Setting the Clock Automatically...
8Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the Australia). Press the ENTER button.
9The message Enjoy your viewing. is displayed. When you have finished, press the ENTER button.
®®Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature …
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3Press the ENTER button again to select Plug & Play. The message Start Plug & Play is displayed.
4Enter your 4 digit PIN number. The default PIN number of a new TV set is “0-0-0-0”.
® When there is a locked channel by Child Lock
setting, PIN input screen appears. (refer to page 25)
®®For further details on setting up options, refer to the pages 10-11.
®®The Plug & Play feature is only available in the TV mode.
Plug & Play
Set current date and time |
|
|
Day |
Month |
Year |
01 |
01 |
2008 |
Hour |
Minute |
|
12 |
00 |
|
Move |
Adjust |
Enter |
Skip |
|
|
|
|
|
Plug & Play
Enjoy your Viewing.
OK
Plug & Play
Set the Clock Mode.
Clock Mode |
: Auto |
Manual
Move
Enter
Skip
Plug & Play
Select the time zone where you are located.
New South Wales/ACT
Victoria
Queensland
SouthAustralia
WesternAustralia
Tamania
▼
Setup |
Plug & Play |
Move |
Enter |
|
|
|
Skip |
|
|
||||||
|
|
|
|
|
► |
||
|
|
|
|
|
|
||
|
Time |
|
|
|
|
|
|
|
Change PIN |
|
|
|
|
|
|
|
Parental Lock |
|
|
|
|
|
|
|
Subtitle |
|
|
|
|
|
|
|
Teletext Language |
: ---- |
|
|
|
|
|
|
Preference |
|
|
|
|
|
|
Wall-MountAdjustment
English - 11
You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu changes depending on which external input mode you are viewing.
1Press the TOOLS button. The TOOLS menu will appear.
2Press the ▲ or ▼ button to select a menu, then press the ENTER button.
3Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.
For a more detailed description of each function, refer to the corresponding page.
•Device List, see page 72
•Picture Mode, see page 27
•Sound Mode, see page 32
•Sleep Timer, see page 35
•SRS TS XT, see page 32
•Energy Saving, see page 39
•Dual I II, see page 34
•PIP, see page 39
•Auto Adjustment, see page 43
TOOLS
Device List |
|
|
|
Picture Mode |
: Standard |
|
|
Sound Mode |
: Custom |
|
|
Sleep Timer |
: |
Off |
|
SRS TS XT |
: |
Off |
|
Energy Saving |
: |
Off |
|
Dual I II |
: |
Mono |
|
|
Move |
Enter |
Exit |
You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the TV source.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Input, then press the ENTER button.
3Press the ENTER button again to select Source List.
4Press the ▲ or ▼ button to select the signal source, then press the ENTER button.
Available signal sources: TV, AV1, AV2, S-Video,
Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, USB
®You can choose only those external devices that are connected to the TV.
®Using the Color buttons on the remote with the Source list.
•Red (Refresh): Refreshes the connecting external devices.
•(Option): Displays the Edit Name and Information menus.
®You can select these options simply by pressing the SOURCE button on the remote control.
®To watch television programme again, press the TV/DTV button and select the channel number required.
Input |
Source List |
|
Edit Name |
TV
AV1 |
---- |
AV2 |
---- |
S-Video |
---- |
Component1 |
---- |
Component2 |
---- |
PC |
----- |
Refresh |
Option |
English - 12
You can give a name to the external source.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Input, then press the ENTER button.
3Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
4Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER button.
5Select the required device by pressing ▲ or ▼, then press the ENTER button.
Available device names: VCR, DVD, Cable STB, Satellite
STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, HD DVD, Digital Media Adapter.
6Press the EXIT button to exit.
|
Source List |
|
Input |
Edit Name |
► |
Edit Name
|
AV1 |
: ---- |
► |
|
|
AV2 |
: ---- |
|
|
|
S-Video |
: ---- |
|
|
|
Component1 |
: ---- |
|
|
|
Component2 |
: ---- |
|
|
|
PC |
: ---- |
|
|
|
HDMI1 |
: ---- |
|
|
|
|
|
|
|
|
|
|
|
|
|
Move |
|
Enter |
Return |
|
|
|
||
|
Edit Name |
|
||
|
AV1 |
: |
---- |
|
|
AV2 |
: |
VCR |
|
|
S-Video |
: |
DVD |
|
|
Component1 |
: |
Cable STB |
|
|
Component2 |
: |
Satellite STB |
|
|
PC |
: |
PVR STB |
|
|
HDMI1 |
: |
|
|
|
|
|
|
|
|
Move |
|
Enter |
Return |
|
|
|
|
|
English - 13
You can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER button.
3Press the ▲ or ▼ button to select Auto Store, then press the ENTER button.
4Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select Start.
®Digital & Analogue: Digital and Analog channels. Digital: Digital channels.
Analogue: Analog channels.
®Scans for all channels with active broadcast stations and stores them in the TV’s memory.
®If you want to stop Auto Store, press the ENTER button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press
the ENTER button.
5Press the EXIT button to exit.
®When there is a locked channel by Child Lock setting, PIN input screen appears. (refer to page 25)
Channel |
Auto Store |
|
► |
|
|
||
|
Manual Store |
|
|
|
Full Guide |
|
|
|
Mini Guide |
|
|
|
Default Guide |
: Mini Guide |
|
|
Channel List |
|
|
|
Channel Mode |
:Added Channels |
|
|
Child Lock |
: On |
|
|
|
|
|
|
Plug & Play |
|
|
Select the channel source to memorize. |
|
||
|
|
|
|
|
Digital &Analogue |
|
Start |
|
Digital |
|
Start |
|
Analogue |
|
Start |
|
|
|
|
|
Move |
Enter |
Return |
|
|
|
|
|
Plug & Play |
|
|
Auto Store in progress. |
|
Channel 6 |
|
Digital Channels: 0 |
|
|
|
Analogue Channels : -- |
|
|
|
|
|
|
3% |
|
|
|
|
|
Stop |
|
|
|
|
Enter |
Return |
Plug & Play
Auto Store is completed.
Digital channels: 20
Analogue channels: 36
OK
Enter
Return
English - 14
You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER button.
3Press the ▲ or ▼ button to select Manual Store, then press the ENTER button.
4Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
5 When you are satisfied with your setting, press the ENTER button. 6 Press the EXIT button to exit.
Digital Channel
Channel
Press the ▲, ▼ or numeric buttons (0~9) to select a channel. The available channels are 5~69. The corresponding frequency for the selected channel is automatically set
Frequency
You can specify the frequency (KHz) using the numeric buttons (0~9). If you do not know the exact frequency, follow the above step to select the frequency automatically using channel.
Bandwidth
Press the ▲ or ▼ button to select a bandwidth. The available bandwidths are 7 and 8 MHz.
Analogue Channel
Channel
Channel
Auto Store |
|
Manual Store |
► |
Full Guide |
|
Mini Guide |
|
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
:Added Channels |
Child Lock |
: On |
Fine Tune |
|
Auto Store |
|
Manual Store |
Digital Channel |
Full Guide |
Analogue Channel |
|
|
Mini Guide |
|
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
:Added Channels |
Child Lock |
: On |
Fine Tune |
|
Programme (Programme number to be assigned to a channel)
Press the ▲ or ▼ button until you find the correct number.
®You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored) Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
Press the ► button, then press the ▲ or ▼ button to select the required number.
®You can also select the channel number directly by pressing the numeric buttons (0~9).
Manual Store
Channel |
Frequency |
Bandwidth |
5 |
178750 KHz |
8 MHz |
Move |
Adjust |
Search |
Return |
Manual Store
Programme |
Colour System |
Sound System |
|
|
1 |
AUTO |
BG |
Channel |
Search |
Store |
|
C |
-- |
40 MHz |
? |
Move
Adjust
Return
®If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers) Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number) Set to OK by pressing the ENTER button.
®Channel mode
-P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
-C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
-S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
English - 15
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER button.
3Press the ▲ or ▼ button to select Full Guide, Mini Guide or Default Guide then press the ENTER button.
Full Guide
For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.
®One hours of programme information is displayed which may be scrolled forwards or backwards in time.
Mini Guide
The information of each program is displayed by each line on the current channel Mini Guide screen from the current program onwards according to the program starting time order.
▲/▼/◄/►, (ENTER)
RED
GREEN
YELLOW
BLUE
INFO
Select a programme by pressing the ▲/▼ /◄/► button.
If the next progrmme is selected, it is scheduled with the clock icon displayed. If the ENTER button is pressed again, press the ▲/▼/◄/► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.
For details about scheduling programmes, refer to the section.
Toggle between the Mini Guide or Full Guide.
Full Guide: Scroll backwards quickly (24 hours).
Mini Guide: Display next page quickly.
Full Guide: Scroll forwards quickly (24 hours).
Mini Guide: Display previous page quickly.
Exit the guide.
INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included
on the detailed information. “…” will be appeared if the summary is long.
Default Guide: Mini Guide/Full Guide
Press the ▲ or ▼ button to select Mini Guide or Full Guide. Press the ENTER button. The selected guide menu is displayed.
®You can also display the guide menu simply by pressing the GUIDE button.
Auto Store
Manual Store
|
Channel |
|
Full Guide |
|
|
|
|
|||
|
|
|
|
|
|
|
||||
|
|
|
Mini Guide |
|
|
|
|
|||
|
|
|
Default Guide |
: Mini Guide |
|
|
||||
|
|
|
Channel List |
|
|
|
|
|||
|
|
|
Channel Mode |
:Added Channels |
|
|
||||
|
|
|
Child Lock |
: On |
|
|
|
|||
|
|
|
Fine Tune |
|
|
|
|
|
||
|
|
|
Signal Information |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
||
|
Full Guide |
|
|
|
|
|
|
|
||
|
|
|
|
|
DTV 805 BBCi |
|
18:08 Fri 5Aug |
|
|
|
|
|
|
|
|
BBCi |
|
|
|
|
|
|
|
|
|
18:00~0:00 |
|
|
|
|
||
|
|
|
|
|
BBCi-featuring news, sport, weather and TV.. |
|
||||
|
|
|
|
|
|
|
|
|
||
|
|
Today |
18:00~19:00 |
|
19:00~20:00 |
|
|
|||
|
▲801 BBC NEWS 24 |
BBC Ne.. |
|
BBC News |
|
|
||||
|
802 BBC ONE |
|
|
BBC Ne.. |
|
Departure Lounge |
|
|||
|
803 BBC THREE |
This is BBC THREE |
The 7 O’.. |
|
|
|||||
|
804 BBC THREE |
This Weakest L.. |
Tsunami.. |
|
|
|||||
|
805 |
BBCi |
|
|
|
BBCi |
|
|
|
|
|
▼806 |
|
|
|
|
Canal 7 |
|
No Information |
|
|
|
Watch |
|
INFO |
information |
Mini Guide |
|
+24 Hours |
Exit |
||
|
|
|
Manual Store |
|
|
|
|
|||
|
Channel |
|
Full Guide |
|
|
|
|
|
||
|
|
Mini Guide |
|
|
|
|
||||
|
|
|
|
|
|
|
||||
|
|
|
Default Guide |
: Mini Guide |
|
|
||||
|
|
|
Channel List |
|
|
|
|
|||
|
|
|
Channel Mode |
:Added Channels |
|
|
||||
|
|
|
Child Lock |
: On |
|
|
|
|||
|
|
|
Fine Tune |
|
|
|
|
|
||
|
|
|
Signal Information |
|
|
|
|
|||
|
|
|
|
|
|
|
||||
|
Mini Guide |
|
|
DTV 801 BBC NEWS 24 |
|
|
||||
|
|
18:00 |
|
|
|
BBC News |
|
|
|
|
|
|
18:30 |
|
|
|
Sportsday |
|
|
|
|
|
|
19:00 |
|
|
|
BBC News |
|
|
|
|
|
Watch |
INFO |
information |
Full Guide |
|
Next Page |
Exit |
|||
|
|
|
Full Guide |
|
|
|
|
|
||
|
Channel |
|
Mini Guide |
|
|
|
|
|||
|
|
Default Guide |
Full Guide |
|
|
|||||
|
|
|
Mini Guide |
|
|
|||||
|
|
|
Channel List |
|
|
|
|
|||
|
|
|
Channel Mode |
:Added Channels |
|
|
||||
|
|
|
Child Lock |
: On |
|
|
|
|||
|
|
|
Fine Tune |
|
|
|
|
|
||
|
|
|
Signal Information |
|
|
|
|
|||
|
|
|
LNA |
|
:On |
|
|
|
English - 16
Show all currently available channels. To use the Channel List function, first run Auto Program.
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2Press the ◄ button to select Added Channels.
3Press the ▲ or ▼ button to select All Channels, then press the ENTER button. Shows all currently available channels.
4Press the ▲ or ▼ button to select a channel to view, then press the ENTER button.
Press the CH LIST button on the remote control to bring up the channel lists.
Using the Color buttons on the Remote with the Channel List
•Red (Antenna): Toggle between your TV, Radio, Data/ Other and All.
•Green (Zoom): Enlarges or shrinks a channel number.
•Yellow (Select): Selects multiple channel lists.
•(Option): Displays the Delete(or Add), Add to Favourite(or Delete from Favourite), Lock, Timer Viewing, Edit Channel Name, Sort, Edit Channel Number, Select All, Deselect All or Auto Store menu. (The Options menus may differ depending on the situation.)
|
Mini Guide |
|
Channel |
Default Guide |
: Mini Guide |
Channel List |
|
|
|
|
|
|
Channel Mode |
: Added Channels |
|
Child Lock |
: On |
|
Fine Tune |
|
|
Signal Information |
|
|
LNA |
: On |
Added |
824 |
UKTV Gold |
|
825 |
UKTV style |
||
|
Channels |
|
|
1 |
C -- |
|
|
|
|
|
|
|
||||
|
|
2 |
C -- |
|
|
|
|
|
|
|
|
||||
|
|
|
|
||||
|
|
|
3 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
4 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
5 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
6 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
|
|
|
7 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
||
Added |
824 |
UKTV Gold |
|
|
|||
825 |
UKTV style |
|
|
||||
|
|
|
|||||
Channels |
|
|
1 |
C -- |
|
|
|
|
|
|
|
||||
|
|
|
|
||||
|
|
2 |
C -- |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
||
|
|
|
3 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
4 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
5 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
6 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
|
|
|
7 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
||
|
824 |
UKTV Gold |
|
|
|||
Added |
825 |
UKTV style |
|
|
|||
|
|
1 |
C -- |
|
Delete |
|
|
Channels |
|
|
|
|
|||
|
|
|
|
|
Timer Viewing |
||
|
|
|
2 |
C -- |
|
Add to Favourite |
|
|
|
|
3 |
C -- |
|
Edit Channel Name |
|
|
|
|
|||||
|
|
|
4 |
C - |
|
||
|
|
|
5 |
C -- |
|
Sort |
|
|
|
|
6 |
C -- |
|
SelectAll |
|
|
|
|
7 |
C -- |
|
|
▼ |
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
®A gray-colored channel indicates the channel has been deleted. The Add menu only appears for deleted channels.
®A channel marked with ♥ mark means the channel has been set as a Favourite. The Delete from Favourite menu only appears for channels with the ♥ mark.
English - 17
You can delete or add a channel to display the channels you want.
1 |
Press the MENU button. |
|
|
Press the ▲ or ▼ button to select Channel, then press the |
|
|
ENTER button. |
Channel |
|
Press the ▲ or ▼ button to select Channel List, then |
|
|
press the ENTER button. |
|
2 |
Press the ◄ button to select Added Channels. |
|
3Press the ▲ or ▼ button to select All Channels.
Shows all currently available channels. Press the ENTER button.
Mini Guide |
|
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
:Added Channels |
Child Lock |
: On |
Fine Tune |
|
Signal Information |
|
LNA |
: Off |
4Press the ▲ or ▼ button to select a channel to delete, then press the TOOLS button.
5Press the ENTER button to select Delete.
All deleted channels will be shown on Added Channels menu.
6Press the EXIT button to exit.
®®You can also add a channel to the Added Channels menu in the same manner.
®®A channel must be deleted before it can be added back to the Added Channels list.
®®To Add (Restore) a channel back to the Added Channel List, follow steps 1-3 above, press the ▲ or ▼ button to select a channel to add, the press the TOOLS button. Press the ENTER button to select Add.
®®Press the CH LIST button on the remote control to bring up the channel lists.
Added |
824 |
UKTV Gold |
|
825 |
UKTV style |
||
|
Channels |
|
|
1 |
C -- |
|
|
|
|
|
|
|
||||
|
|
2 |
C -- |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
||
|
|
|
3 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
4 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
5 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
6 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
|
|
|
7 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
||
Added |
824 |
UKTV Gold |
|
|
|||
825 |
UKTV style |
|
|
||||
|
|
|
|||||
Channels |
|
|
1 |
C -- |
|
|
|
|
|
|
|
||||
|
|
2 |
C -- |
|
|
|
|
|
|
|
|
|
|||
|
|
|
3 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
4 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
5 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
6 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
7 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
||
|
824 |
UKTV Gold |
|
|
|||
Added |
825 |
UKTV style |
|
|
|||
|
|
1 |
C -- |
|
Delete |
|
|
Channels |
|
|
|
|
|||
|
|
2 |
C -- |
|
Add to Favourite |
||
|
|
|
|
||||
|
|
|
3 |
C - |
|
Lock |
|
|
|
|
|
||||
|
|
|
4 |
C -- |
|
Timer Viewing |
|
|
|
|
|||||
|
|
|
5 |
C -- |
|
Channel Nam e Edit |
|
|
|
|
|||||
|
|
|
6 |
C -- |
|
Sort |
▼ |
|
|
|
|
||||
|
|
|
|
|
|||
|
|
|
7 |
C -- |
|
|
|
|
|
|
|
|
|
||
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
English - 18
You can set channels you watch frequently as Favourites.
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2Press the ◄ button to select Added Channels.
3Press the ▲ or ▼ button to select All Channels, then press the ENTER button.
Shows all currently available channels.
Channel
Mini Guide |
|
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
:Added Channels |
Child Lock |
: On |
Fine Tune
Signal Information
LNA : Off
4Press the ▲ or ▼ button to select a channel as a Favourite channel, then press the TOOLS button.
5Press the ▲ or ▼ button to select Add to Favourite, then press the ENTER button.
The “♥” symbol will be displayed and the channel will be set as a Favourite.
6To cancel your Favourite channel selection, press the TOOLS button when a Favourite channel is selected. Press the ▲ or ▼ button to select Delete from Favourite, then press the ENTER button. The channel is deleted from Favourites and the “♥” mark disappears.
Press the EXIT button to exit.
®®You can also Add or Delete a channel from Favourites in the Added Channels menu in the same manner.
®®All Favourite channels will be shown on Favourite menu.
®®Press the CH LIST button on the remote control to bring up the channel lists.
Channel Mode: Added Channels/Favourite Channels
−Added Channels
Press the ▲ or ▼ button to select Added Channels, then press the ENTER button.
−Favourite Channels
Press the ▲ or ▼ button to select Favourite Channels, then press the ENTER button.
Channels Added
824 UKTV Gold
825 UKTV style
|
1 |
C -- |
Delete |
|
2 |
C -- |
Add to Favourite |
|
Lock |
||
|
3 |
C -- |
|
|
Timer Viewing |
||
|
4 |
C -- |
|
|
Edit Channel Name |
||
|
5 |
C -- |
|
|
Sort |
||
|
6 |
C -- |
▼ |
|
7 |
C -- |
|
|
8 |
C -- |
|
All |
Channel Type Zoom |
Select Option |
English - 19
If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel.
To reserve a program, set the current time first. See page 35. Reserved chanels can only be set if they are in the Channel List (See page 17).
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2Press the ▲ or ▼ button to select a channel, then press the TOOLS button.
3Press the ▲ or ▼ button to select Timer Viewing, then press the ENTER button.
The Reserve a Program (Timer Viewing) screen appears.
4Press the ▲/▼/◄/► buttons to reserve a program and then press the ENTER button.
Reserving a program has been completed. Press the EXIT button to exit.
®You can also reserve a program in the All Channels or Favourite menus using the same procedures.
®For information on how to confirm a viewing reservation, refer to page 21. Only memorized channels can be reserved channels.
®You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.
Press the CH LIST button on the remote control to bring up the channel lists.
|
Mini Guide |
|
Channel |
Default Guide |
: Mini Guide |
Channel List |
|
|
|
|
|
|
Channel Mode |
:Added Channels |
|
Child Lock |
: On |
|
Fine Tune |
|
|
Signal Information |
|
|
LNA |
: Off |
|
824 |
UKTV Gold |
|
|
|
Added |
825 |
UKTV style |
|
|
|
|
1 |
C -- |
Delete |
|
|
Channels |
|
|
|||
2 |
C -- |
Lock |
|
||
|
|
|
|
Delete from Favourite |
|
|
|
3 |
C -- |
Timer Viewing |
|
|
|
||||
|
|
4 |
C -- |
Edit Channel Name |
|
|
|
||||
|
|
5 |
C -- |
Sort |
▼ |
|
|
||||
|
|
6 |
C -- |
|
|
|
|
7 |
C -- |
|
|
|
|
|
|
||
|
|
8 |
C -- |
|
|
|
|
|
|
||
All |
Channel Type Zoom |
Select |
Option |
||
|
|
|
Timer Viewing |
|
|
|
Antenna |
Channel |
Repeat |
||
|
DTVAir |
1 |
|
once |
|
|
|
Date |
|
Start Time |
|
|
01-01-2008 |
|
10:09 |
Move
Adjust
Enter
Return
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve a program according to the procedures described above.
: A program currently being broadcast.
: A reserved program.
Continued...
Channels Added
|
824 |
UKTV Gold |
|
|
|
|
825 |
UKTV style |
1/22/2008 |
|
|
|
|
1 |
C -- |
12:47 am |
2.0 |
|
|
||||
|
|
||||
|
|
2 |
C -- |
3:54 am |
KBS 2TV |
|
|
||||
|
|
||||
|
|
3 |
C -- |
6:44 am |
HD 1 100 |
|
|
||||
|
|
4 |
C -- |
7:49 am |
HD |
|
|
||||
|
|
5 |
C -- |
8:59 am |
+ |
|
|
||||
|
|
6 |
C -- |
10:08 am |
|
|
|
|
|||
|
|
7 |
C -- |
10:37 am |
|
|
|
|
|||
|
|
8 |
C -- |
|
|
|
|
|
|
||
Air |
Zoom |
Option |
Watch |
|
English - 20
You can view, modify or delete a reservation.
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2Press the ◄ button to select Added Channels.
3Press the ▲ or ▼ button to select Programmed, then press the ENTER button.
You can view the program reservations.
Modifying a viewing reservation
4To select a reservation item to be modified, press the ▲ or ▼ button and then press the TOOLS button.
5Press the ENTER button to select Change Info.
6Press the ▲/▼/◄/► buttons to change a reservation setting and then press the ENTER button.
The reservation modification is applied.
Canceling a reservation
4To select a reservation item to be canceled, press the ▲ or ▼ button, and then press the TOOLS button.
5Press the ▲ or ▼ button to select Cancel Schedules, then press the ENTER button.
6Press the ◄ or ► button to select OK, then press the ENTER button.
The viewing reservation has been canceled. Press the EXIT button to exit.
Programmed Menu
•Change Info: Select to change a viewing reservation.
•Cancel Schedules: Select to cancel a viewing reservation.
•Information: Select to view a viewing reservation.
•Select All/Deselect All:GYou can select(or Deselect) all channel in the channel list.
Press the CH LIST button on the remote control to bring up the channel lists.
|
Antenna |
|
Channel |
Auto Program |
|
Channel List |
|
|
|
|
|
|
Channel Mode |
:Added Channels |
|
Child Lock |
: On |
|
Fine Tune |
|
|
Signal Strength |
|
|
LNA |
: Off |
Added |
824 |
|
UKTV Gold |
|
|
|
|||
825 |
|
UKTV style |
|
|
|
||||
|
|
|
|
|
|||||
Channels |
|
|
1 |
|
C -- |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|||||
|
|
2 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
3 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
4 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
|
|
5 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
6 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
|
|
7 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
8 |
|
C -- |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
All |
|
Channel Type |
Zoom |
Select |
Option |
|
|||
Programmed |
2007/2/3 |
|
|
|
|
|
|||
3:15 |
am |
1 |
Air |
No Program Name |
|||||
4:15 |
am |
|
2 |
Air |
No Program Name |
||||
|
2008/2/4 |
|
|
|
|
|
|||
|
2:14 |
am |
|
3 |
Air |
No Program Name |
|||
|
2008/2/5 |
|
|
|
|
|
|||
|
2:15 |
am |
|
4 |
Air |
No Program Name |
|||
Air |
|
Antenna |
|
Zoom |
Select |
Option |
Information |
||
Programmed |
2007/2/3 |
|
|
|
|
|
|||
3:15 |
am |
1 |
Air |
Change Info |
|||||
4:15 |
am |
|
2 |
Air |
Cancel Schedules |
||||
|
Information |
||||||||
|
2007/2/4 |
|
|
|
SelectAll |
||||
|
2:14 |
am |
|
3 |
Air |
No Program Name |
|||
|
2007/2/5 |
|
|
|
|
|
|||
|
2:15 |
am |
|
4 |
Air |
No Program Name |
|||
Air |
|
Antenna |
|
Zoom |
Select |
Option |
Information |
Continued...
English - 21
Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
Editing the Channel Name-Analog
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER button.
3Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
4Press the TOOLS button.
5Press the ▲ or ▼ button to select Edit Channel Name, then press the ENTER button.
6Press the ▲ or ▼ button to select the channel to be assigned to a new name, then press the ENTER button.
7Press the ▲ or ▼ button to select a letter, a number, or a symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank).
Move on to the previous or next letter by pressing the ◄ or ► button, then press the ENTER button.
8Repeat steps 6 to 7 for each channel to be assigned to a new name.
9Press the EXIT button to exit.
Editing the Channel Number-Digital
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2Select the channel number that you wish to edit by
pressing the ▲ or ▼ button repeatedly, then press the TOOLS button.
3Press the ▲ or ▼ button to select Edit Channel Number,
then press the ENTER button.
4Then you can edit the Channel Number pressing the ▲ or ▼ button repeatedly. You can also edit the channel number by pressing the number buttons on the remote control.
|
|
|
Mini Guide |
|
|
Channel |
|
|
Default Guide |
: Mini Guide |
|
|
|
Channel List |
|
||
|
|
|
|
||
|
|
|
Channel Mode |
:Added Channels |
|
|
|
|
Child Lock |
: On |
|
|
|
|
Fine Tune |
|
|
|
|
|
Signal Information |
||
|
|
|
LNA |
|
: Off |
|
824 |
UKTV Gold |
|
||
Added |
825 |
UKTV style |
|
||
|
|
1 |
C -- |
Delete |
|
Channels |
|
|
|||
|
|
|
|
Unlock |
|
|
|
|
2 |
C -- |
Add to Favourite |
|
|
|
3 |
C -- |
Timer Viewing |
|
|
||||
|
|
||||
|
|
|
4 |
C -- |
Edit Channel Name |
|
|
||||
|
|
|
5 |
C -- |
Sort |
|
|
|
6 |
C -- |
▼ |
|
|
||||
|
|
|
7 |
C -- |
|
|
|
|
|||
|
|
|
8 |
C -- |
|
|
|
|
|||
All |
|
Channel Type Zoom |
Select Option |
Edit Channel Name
6_
|
|
A |
|
|
|
|
Number |
||
|
|
|
|
|
|
|
|
|
Character |
|
|
|
|
|
|
|
|
|
Delete |
|
|
V |
|
|
|
|
Blank |
||
|
|
|
|
|
|
Done |
|||
|
|
|
|
|
|
|
Move |
Enter |
Return |
|
|
824 |
|
UKTV Gold |
|
|
|
||
Added |
825 |
|
UKTV style |
|
|
|
|||
|
|
1 |
|
C -- |
Delete |
|
|
||
Channels |
|
|
|
|
|
||||
|
|
|
|
|
Unlock |
|
|||
|
|
|
|
2 |
|
C -- |
Add to Favourite |
|
|
|
|
|
|
3 |
|
C -- |
Timer Viewing |
|
|
|
|
|
|
||||||
|
|
|
|
||||||
|
|
|
|
4 |
|
C -- |
Edit Channel Name |
||
|
|
|
|||||||
|
|
|
|
5 |
|
C -- |
Sort |
▼ |
|
|
|
|
|
||||||
|
|
|
|
6 |
|
C -- |
|
|
|
|
|
|
|
7 |
|
C -- |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
8 |
|
C -- |
|
|
|
|
|
|
|
|
|
||||
|
All |
|
Channel Type Zoom |
Select |
Option |
|
|||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
Edit Channel Number |
|
|||
|
Channel |
|
|
Name |
|
||||
|
|
803 |
|
|
|
BBC Radio 1 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Move |
|
Enter |
Return |
|
|
|
|
|
|
|
|
|
|
English - 22
This operation allows you to change the programme numbers of the stored channels.
This operation may be necessary after using the auto store.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER button.
3Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
4Press the TOOLS button.
5Press the ▲ or ▼ button to select Sort, then press the ENTER button.
6Select the channel that you wish to move by pressing the ▲ or ▼ button, then press the ENTER button.
7Select the number of the programme to which the channel is to be moved by pressing the ▲ or ▼ button.
Press the ENTER button. The channel is moved to its new position and all other channels are shifted accordingly.
8Repeat steps 6 to 7 until you have moved all the channels to the required programme numbers.
9Press the EXIT button to exit.
|
|
|
Mini Guide |
|
|
Channel |
|
|
Default Guide |
: Mini Guide |
|
|
|
Channel List |
|
||
|
|
|
|
||
|
|
|
Channel Mode |
:Added Channels |
|
|
|
|
Child Lock |
: On |
|
|
|
|
Fine Tune |
|
|
|
|
|
Signal Information |
||
|
|
|
LNA |
|
: Off |
|
824 |
UKTV Gold |
|
||
Added |
825 |
UKTV style |
|
||
|
|
1 |
C -- |
Delete |
|
Channels |
|
|
|||
|
|
|
|
Lock |
|
|
|
|
2 |
C -- |
Add to Favourite |
|
|
|
3 |
C -- |
Timer Viewing |
|
|
||||
|
|
||||
|
|
|
4 |
C -- |
Edit Channel Name |
|
|
||||
|
|
|
5 |
C -- |
Sort |
|
|
|
6 |
C -- |
▼ |
|
|
||||
|
|
|
7 |
C -- |
|
|
|
|
|||
|
|
|
8 |
C -- |
|
|
|
|
All |
Channel Type Zoom |
Select Option |
|
|
|
|
|
|
Sort |
|
|
802 |
abc1 |
|
|
803 |
BBC Radio 1 |
|
|
804 |
BBC Radio 2 |
|
|
805 |
BBC Radio 3 |
|
|
806 |
BBC Radio 4 |
|
|
807 |
BBC World |
|
▼ |
|
Move |
Enter |
Return |
|
|
|
|
English - 23
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2Press the ▲ or ▼ button to select the Channel to be assigned a new name, then press the TOOLS button.
3Press the ▲ or ▼ button to select Select All or Deselect All, then press the ENTER button.
®You can select(or Deselect) all channel in the channel list.
®The mark appears to the left of the selected channels.
ajoutées Chaînes
824UKTV Gold
825UKTV style
1 |
C -- |
▲ |
|
2 |
C -- |
Lock |
|
Timer Viewing |
|||
3 |
v C -- |
||
Edit Channel Name |
|||
4 |
C -- |
||
5 |
C -- |
Sort |
|
6 |
C -- |
SelectAll |
|
7 |
C -- |
Auto Store |
8C --
Tous |
Type de canal |
Zoom Sélection |
Option |
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
2Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button.
3Press the ▲ or ▼ button to select Auto Store, then press the ENTER button.
®For further details on setting up options, refer to page 14.
®When there is a locked channel by Child Lock setting, PIN input screen appears.(refer to page 25)
You can display either the added channels list or the favourite channels list when the CH LIST button on the remote control is pressed.
1Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Channel Mode, then
press the ENTER button.
2Press the ▲ or ▼ button to select Added Channels or
Favourite Channels, then press the ENTER button.
3Press the EXIT button to exit.
|
824 |
UKTV Gold |
|
||
Added |
825 |
UKTV style |
|
||
|
|
1 |
C -- |
▲ |
|
Channels |
|
|
|||
|
|
2 |
C -- |
Lock |
|
|
|
|
|||
|
|
|
3 |
C -- |
Timer Viewing |
|
|
|
|||
|
|
|
4 |
C -- |
Edit Channel Name |
|
|
||||
|
|
|
5 |
C -- |
Sort |
|
|
||||
|
|
|
6 |
C -- |
SelectAll |
|
|
||||
|
|
||||
|
|
|
7 |
C -- |
Auto Store |
|
|
||||
|
|
|
8 |
C -- |
|
All |
|
Channel Type Zoom |
Select Option |
|
Default Guide |
: Mini Guide |
|
Channel |
Channel List |
|
|
Channel Mode |
: Added Channels |
||
|
|||
|
Child Lock |
: On |
|
|
Fine Tune |
|
|
|
Signal Information |
|
|
|
LNA |
: Off |
Channel
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
Added Channels |
: |
|
|
Favourite Channels |
Child Lock |
: On |
Fine Tune |
|
Signal Information |
|
LNA |
: Off |
English - 24
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.
Locking channels
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER button.
3Press the ▲ or ▼ button to select Child Lock, then press the ENTER button.
Enter your 4 digit PIN number.
®The default PIN number of a new TV set is “0-0-0-0”.
®If you want to change PIN number, refer to page 35. 4 Press the ▲ or ▼ button to select On, then press the
ENTER button.
5Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
6Press the ▲ or ▼ button to select a channel to be locked, then press the TOOLS button.
® The symbol will be displayed and the channel will be locked.
Unlocking channels
7Press the ▲ or ▼ button to select Unlock, then press the ENTER button.
Enter your 4 digit PIN number.
® The channel is unlocked and the mark also disappears.
® The default PIN number of a new TV set is “0-0-0-0”.
|
Channel List |
|
|
|
Channel |
Channel Mode |
:Added Channels |
|
|
Child Lock |
: On |
► |
||
|
||||
|
Fine Tune |
|
|
|
|
Signal Information |
|
|
|
|
LNA |
: Off |
|
Child Lock
|
Enter PIN |
|
|
|
|
|||
|
|
* |
|
|
* |
* |
* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0~9 |
Enter PIN |
Return |
|
|
|
|
|
|
|
|
||
|
|
824 |
UKTV Gold |
|
|
|
||
|
Added |
825 |
UKTV style |
|
|
|
||
|
|
|
1 |
C -- |
Delete |
|
|
|
|
Channels |
|
|
|
|
|||
|
|
|
2 |
C -- |
Add to Favourite |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
3 |
C -- |
Lock |
|
|
|
|
|
|
|
||||
|
|
|
|
4 |
C -- |
Timer Viewing |
|
|
|
|
|
|
|
||||
|
|
|
|
5 |
C -- |
Channel Nam e Edit |
||
|
|
|
||||||
|
|
|
|
6 |
C -- |
Sort |
|
|
|
|
|
|
|
|
|||
|
|
|
|
▼ |
|
|
||
|
|
|
|
7 |
C -- |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
||
|
|
|
|
8 |
C -- |
|
|
|
|
|
|
|
|
|
|||
|
All |
|
Channel Type Zoom |
Select Option |
|
|
Use fine tuning to manually adjust a particular channel for optimal reception.
1Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.
3Press the ◄ or ► button to adjust the fine tuning.
To store the fine tuning setting in the TV’s memory, press the ENTER button.
®If you do not store the fine-tuned channel in memory, adjustments are not saved.
4To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTER button.
Press the EXIT button to exit.
®Only analog TV channels can be fine tuned.
®“ * ” will appear next to the number of fine-tuned channels.
Channel
Air 6 *
Channel Mode |
:Added Channels |
Child Lock |
: On |
Fine Tune |
► |
Signal Information |
|
LNA |
: Off |
Fine Tune
|
|
|
Fine Tune |
|
|
|
|
|
+5 |
|
|
|
|
|
Reset |
|
|
||
|
|
|
||
Adjust |
Enter |
|
Return |
English - 25