Samsung PS-42E97HD, PS-50C77HD, PS-50C67HD, PS-42C77HD, PS-50E97HD User Manual

...
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Kapcsolatfelvétel: SAMSUNG WORLD-WIDE
Bármilyen észrevétele, vagy kérdése van Samsung termékekkel kapcsolatban, forduljon a SAMSUNG ügyfélszolgálathoz
Kontakt do SAMSUNG WORLD-WIDE
Jeżeli masz jakieś uwagi lub pytania w sprawie produktów marki Samsung, skontaktuj się z naszą infolinią.
Επικοινωνήστε με τη SAMSUNG ΣΕ ΟΛΟ ΤΟΝ ΚΟΣΜΟ
Εάν έχετε σχόλια ή ερωτήσεις σχετικά με προϊόντα της Samsung, επικοινωνήστε με το κέντρο εξυπηρέτησης πελατών της SAMSUNG.
Свържете се със SAMSUNG WORLD WIDE (SAMSUNG ПО ЦЕЛИЯ СВЯТ)
Ако имате въпроси или коментари за продуктите на Samsung, се обърнете към центъра за обслужване на клиенти на SAMSUNG.
Skontaktujte Celosvetový Samsung
Ak máte nejaké otázky alebo komentáre ohľadom produktov spoločnosti Samsung, prosím, skontaktujte centrum starostlivosti o zákazníkov spoločnosti SAMSUNG.
Kontaktujte Samsung po celém světě
Pokud máte dotazy nebo připomínky týkající se výrobků Samsung, kontaktujte středisko péče o zákazníky společnosti SAMSUNG.
Contactaţi SAMSUNG WORLD WIDE (Samsung în întreaga lume)
Dacă aveţi orice întrebări sau comentarii în legătură cu produsele Samsung, contactaţi centrul de asistenţă pentru clienţi SAMSUNG.
Country
AUSTRIA 0800-SAMSUNG(726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
DENMARK 70 70 19 70 www.samsung.com/dk FINLAND 030-6227 515 www.samsung.com/fi
FRANCE
GERMANY 01805 - 121213 (€ 0,14/Min) www.samsung.de HUNGARY ITALIA LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900 20 200 88 (€ 0,10/Min) www.samsung.com/nl NORWAY
POLAND
PORTUGAL REPUBLIC OF IRELAND 0818 717 100 www.samsung.com/ie SLOVAKIA SPAIN 902 10 11 30 www.samsung.com/es SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG(726-7864) www.samsung.com/ch U.K 0870-SAMSUNG(726-7864) www.samsung.com/uk ESTONIA KAZAHSTAN KYRGYZSTAN LATVIA LITHUANIA 8-800-77777 www.samsung.lt RUSSIA 8-800-555-55-55 www.samsung.ru UKRAINE 8-800-502-0000 www.samsung.ua UZBEKISTAN
Customer Care Centre
844 000 844 www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
3260 SAMSUNG(726-7864) 08 25 08 65 65 (€ 0,15/Min)
06-80-SAMSUNG(726-7864) www.samsung.com/hu 800-SAMSUNG(726-7864) www.samsung.com/it
815-56 480 www.samsung.com/no 0 801 801 881 022-607-93-33 80 8 200 128 www.samsung.com/pt
0800-SAMSUNG(726-7864) www.samsung.com/sk
800-7267 www.samsung.ee 8-10-800-500-55-500 www.samsung.kz 00-800-500-55-500 800-7267 www.samsung.com/lv
8-800-120-0-400 www.samsung.uz
Web Site
www.samsung.com/fr
www.samsung.com/pl
BN68-01330C-00
PDP-TELEVISION (PLASMA DISPLAY PANEL)
Owner’s Instructions
Before operating the unit,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP)
Energy Saving TELETEXT (Option) SRS TruSurround XT
Digital Natural Image engine
Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
English - 2

User Instructions

Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)A still image displayed too long may cause permanent damage to the PDP Panel.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
English - 3

Contents

General Information
User Instructions .............................................2
Checking Parts ................................................ 4
Using the Stand-Base
(PS-42E97HD/PS-50E97HD) .........................4
Control Panel .................................................5
Connection Panel ............................................ 6
Viewing the Remote Control ...........................8
Operation
Switching Your Television On and Off ............. 9
Viewing the Menus ........................................ 10
Plug & Play Feature ......................................10
Viewing an External Signal Sources ............. 12
Editing Device Names ................................... 13
Channel Control
Storing Channels Automatically .................... 13
Storing Channels Manually ...........................14
Adding / Locking Channels ...........................15
Sorting the Stored Channels ......................... 16
Assigning Names to Channels ...................... 16
Fine Tuning Channel Reception ....................17
Picture Control
Changing the Picture Standard ..................... 17
Customizing the Picture Settings .................. 18
Configuring Detailed Settings
on the Picture ................................................ 19
Selecting the Picture Size .............................20
Selecting the Screen Mode ........................... 20
Digital NR / Active Colour / DNIe ..................21
Freezing the Current Picture ......................... 21
Function Description
Time Features ............................................... 24
Language / Blue Screen / Melody / Light Effect / Energy Saving / HDMI Black Leve
Using the Game Mode ..................................26
Wall- mount adjustment (Sold separately) .... 27
Viewing the Picture in Picture (PIP) .............. 28
Screen Burn Protection ................................. 29
l .................... 25
PC Display
Setting up Your PC Software
(Based on Windows XP) ............................... 30
Input Mode (PC) ............................................ 31
Setting the PC ............................................... 32
Setting the Home Theatre PC ....................... 33
Using the DTV Feature
Previewing the DTV Menu System ...............34
Displaying Programme Information ............... 35
Operating the DTV Menu ..............................36
Appendix
Teletext Feature (depending on the model) .. 46
Wall Mount Kit Specifications (VESA) ........... 48
Setting Up Your Remote Control ...................49
How to assemble the Stand-Base
(depending on the model) ............................ 54
Troubleshooting ............................................54
Specifications ................................................ 55
Sound Control
Sound Features ............................................ 22
Selecting the Sound Mode
(depending on the model) ............................. 23
Symbols
Press
Important
Note
English - 4

Checking Parts

Owner’s Instructions Remote Control/
Warranty Card/
Registration Card/
Safety Guide Manual
Antenna Cable Component Cables Audio Cables PC Cable
Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable
Ferrite Core (Power Cord)
The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.
AAA Batteries
Cover-Bottom / Screws (2ea)
(Refer to page 54)
(PS-42E97HD/PS-50E97HD)
Sold Separately
Power Cord Cloth-Clean
Ferrite Core for Power Cord
(PS-42E97HD/
PS-50E97HD)

Using the Stand-Base (PS-42E97HD/PS-50E97HD)

Two or more people should carry
➢ 
the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always keep the PDP upright.
 The PDP can rotate 20 degrees in
right and left directions.
-20° ~ 20°
English - 5

Control Panel

7
Front (or Side) Panel
(PS-42C67HD/PS-50C67HD/PS-42C77HD/PS-50C77HD)
(PS-42E97HD/PS-50E97HD)
The product colour and shape may vary depending on the model.
1
SOURCE
Displays a menu of all of the available input sources (TV, Ext.1, Ext.2, Component, PC, HDMI, and DTV).
2
MENU
Press to see the on-screen menu of your TV’s features.
3
+−
Press to increase or decrease the volume. In the on-screen menu, use the +− buttons as you use the ◄ and ► buttons on the remote control.
4
C/P.
Press to change channels. In the on-screen menu, use the C/P. buttons as you use the ▲ and ▼ buttons on the remote control.
5
(ENTER)
Press to confirm a selection.
6
(Power) button
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
7
Speaker
English - 6

Connection Panel

Rear Panel
1
0
or
Cable Television
Network
7
8
or
9
6
2
The product colour and shape may vary depending on the model.
 Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
 When connecting an external device, match the colour of the connection terminal to the cable.
1
POWER IN
Connect the supplied power cord.
2
Connecting external Audio Devices
Connect RCA audio signals from the TV to an external source, such as Audio equipment.
3
EXT 1, EXT 2
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Input/Output Specification
Connector
Video Audio(L/R) RGB Video + Audio(L/R)
EXT 1
EXT 2
3
Input Output
Only TV or DTV
output is available.
Output you can
4
choose.
5
4
COMPONENT IN
Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component.
5
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
6
SERVICE
− Connector for service.
− Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control.
7
PC IN / AUDIO
Connect to the video and audio output jack on your PC.
Continued...
English - 7
8
COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot. (refer to page 45)
− When not inserting “CI CARD” in some channels, “Scramble Signal” is displayed on the screen.
− The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
− When the channel information configuration has finished, the message “Updating Completed” is displayed, indicating that the channel list is now updated.
Insert the CI-Card in the direction marked
on it.
9
HDMI IN(DVI IN)
− Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)
− When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.
− Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)
DVI IN AUDIO L/R
DVI audio outputs for external devices.
0
ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
Supported modes for HDMI and Component
HDMI/DVI 50Hz X X X O O O HDMI/DVI 60Hz X O X X O O
Component O O O O O O
480i 480p 576i 576p 720p 1080i
English - 8

Viewing the Remote Control

This is a special remote control for the visually impaired persons, and has Braille points on the
➢ 
Power, Channel, Volume, STOP, and PLAY/PAUSE buttons.
 The performance of the remote control may be affected by bright light.
1
POWER button
(turns the TV on and off)
2
Number buttons for direct
channel access
3
One/Two-digit channel
selection
4
Channel control button
(Refer to page 15)
5
Selects the TV and DTV
mode directly
6
Volume increase
Volume decrease
7
Temporary sound switch-off
8
Displays the main on-screen
menu
9
Returns to the previous
menu
!
TruSurround XT mode
button
@
Picture size selection
#
Electronic Program Guide
(EPG) display
$
Sound mode selection
%
Remote control setup
^
Selects a target device to be
controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR)
&
Press to backlight the VOL,
CH, and the active source button (TV, DVD, CABLE, STB, VCR) on the remote.
*
Available source selection
(
Previous channel
)
DTV menu display
a
Selects the HDMI mode
directly
b
VCR/DVD Function (Rewind,
Stop, Play/Pause, Fast/ Forward)
c
Next channel
Previous channel
d
Exit the on-screen menu
e
Control the cursor in the
menu
f
Use to see information on
the current broadcast
h
Picture-In-Picture On/Off
i
Picture effect selection
(Refer to page 17)
j
Digital subtitle display
k
Picture freeze
l
If your remote control is not
functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again.
Teletext Functions
(Refer to page 46)
5
Exit from the teletext display
(depending on the model)
8
Teletext index
0
Fastext topic selection
@
Teletext size
*
Teletext mode selection
(LIST/FLOF)
(
Teletext sub page
c
P :Teletext next page
P :Teletext previous page
d
Teletext cancel
f
Teletext reveal
g
Teletext display/mix both
teletext information and the normal broadcast
h
Teletext hold
i
Teletext store
Continued...
English - 9
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as
shown in the figure.
2 Install two AAA size batteries.
Make sure to match the “+” and “” ends of the
batteries with the diagram inside the compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
Remove the batteries and store them in a cool and dry
place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The main lead is attached to the rear of the television. 1 Plug the main lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on the
remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on page 10.
3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press
the POWER button on the remote control.
4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER
button or number buttons on the remote control.
English - 10

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, and Input.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER/OK button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER/OK button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.

Plug & Play Feature

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
If you accidentally select the wrong country for your TV, the
characters on the screen may be wrongly displayed. Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
1 If the television is in standby mode, press the POWER button
on the remote control. The message Start Plug & Play is displayed. Press the ENTER/OK button.
2 The Language menu will automatically appear after several
seconds.
3 Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER/OK button. The message Select Home
Mode when installing this TV at home. is displayed.
4 Press the ◄ or ► button to select Shop or Home, then press
the ENTER/OK button. The message to check the connected status of the antenna is displayed.
The default selection is Home.
We recommend setting the TV to Home mode for the best
picture in your home environment. Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode, and you want to
return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the TV panel.
5 Make sure that the antenna is connected to the TV.
Press the ENTER/OK button. The Country menu is displayed.
T V
Mode : Contrast 100 Brightness 45 Sharpness 75 Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Size : Auto Wide Screen Mode : 16:9 Digital NR : Auto More
Language
Move
Select Home Mode when installing this TV at home.
Move
Country
Move
Picture
Move
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
English
Deutsch Français
Italiano
Enter
Plug & Play
Shop
Enter
Plug & Play
Check antenna input.
OK
Enter
Plug & Play
United Kingdom
Austria
Eastern Europe
Enter
Dynamic
Enter
Skip
Home
Skip
Exit
Continued...
English - 11
6 Select your country or area by pressing the ▲ or ▼ button.
Press the ENTER/OK button. The message Some DTV functions may not be available. Digital Scan? is displayed. If your country supports the DTV functions, the message is not displayed. Then you can follow the instructions from step
12. When the local service provider does not support DTV broadcasting but you choose a DTV supporting country, it enters the DTV Plug & Play but DTV functions may not work properly.When
No is selected, follow the instructions from step 7 to 10. When Yes is selected, follow the instructions from step 11.
7 Select No pressing the ◄ or ► button, then press the
ENTER/OK button. Auto Store menu is displayed.
8 Press the ENTER/OK button to start search the channels.
The channel search will start and end automatically. After all the available channels are stored, Clock Set menu is automatically displayed. Press the ENTER/OK button.
To stop the search before it has finished, press the
ENTER/OK button with Stop selected.
9 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Minute. Set these by pressing the ▲ or ▼ button.
You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote control.
10 Press the ENTER/OK button to confirm your setting. The
message Enjoy your viewing is displayed. When you have finished, press the ENTER/OK button.
Even if the ENTER/OK button is not pressed, the message
will automatically disappear after several seconds.
11 Select Yes
pressing the ◄ or ► button, then press the
ENTER/OK button. Auto Store menu is displayed.
12 Press the ENTER/OK button to start search the analog
channels. The analog channel search will start and end automatically. After all the available analog channels are stored, the screen for searching digital channels is automatically displayed.
To stop the search before it has finished, press the
ENTER/OK button with Stop selected.
13 Press the ENTER/OK button to start search the digital
channels. The digital channel search will start and end automatically. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.
To stop the search before it has finished, press the
ENTER/OK button with Stop selected. If the DTV channel is updated, the Source in the source list
of the Input menu is automatically changed to DTV. For detailed descriptions about DTV channel update, refer
to page 36 of this manual.
14 Press the ▲ or ▼ button to select required time zone, then
press the ENTER/OK button. The screen for setting the time is displayed. Press the ENTER/OK button.
Plug & Play
Some DTV functions may not be available. Digital Scan?
Enter
Start
Enter
Adjust
Start
Stop
12
No
Minute
:
-
Skip
Skip
00
Enter
Skip
Yes
Move
Plug & Play
P 1 C -- 40 MHz 0 %
Move
Plug & Play
2007
Plug & Play
Skip
Plug & Play
Skip
Plug & Play
Clock Set
Month Day Year Hour
01 01
0% Services found: 0 Channel:
Scanning for digital services...
29% Services found: 6 Channel: 35
The Iberian Peninsula and Balears Islands
Canarian Islands
Move Select
Continued...
English - 12
15 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Min. Set these by pressing the ▲ or ▼ button.
You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote control.
16 Press the ENTER/OK button to confirm your setting. The
message Enjoy your viewing is displayed. When you have finished, press the ENTER/OK button.
Even if the ENTER/OK button is not pressed, the message
will automatically disappear after several seconds.
If you want to reset this feature … 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup, then press the
ENTER/OK button.
3 Press the ENTER/OK button again to select Plug & Play.
The message Start Plug & Play is displayed.

Viewing an External Signal Sources

Set the current time.
Adjust
T V
Plug & Play
Month Day Year
01
15
Hour Min
12 00
Move
Enjoy your viewing
OK
Plug & Play Language : English Time
Game Mode : Off
Blue Screen : Off Melody : Medium
PC Home Theatre PC : Off
Light Effect
:
Wall-Mount Adjustment
Energy Saving : Off More
Move
2007
Select
Setup
In Standby 
Enter
Skip
Return
You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the TV
T V
source (broadcast or cable). 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input, then press the
ENTER/OK button.
3 Press the ENTER/OK button again to select Source List. 4 Press the ▲ or ▼ button to select the signal source, then press
the ENTER/OK button.
Available signal sources:
HDMI, DTV
You can select these options simply by pressing the SOURCE
button on the remote control.
To watch television programme again, press the TV/DTV button
and select the channel number required.
TV, Ext.1, Ext.2, Component, PC,
T V
Move
Move
Input
Source List
Enter
Enter
Return
Return
Source List : TV Edit Name
TV Ext.1 : −−−− Ext.2 : −−−− Component : −−−− PC : −−−− HDMI : −−−−
DTV : −−−−
English - 13

Editing Device Names

You can give a name to the external source.
T V
1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Edit Name, then press the
ENTER/OK button.
4 Press the ▲ or ▼ button to select the external source to be
edited, then press the ENTER/OK button.
5 Select the required device by pressing ▲ or ▼, then press the
ENTER/OK button.
Available device names:
VCR, DVD, D-VHS, Cable STB, HD
T V
STB, Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR (DVD HDD Recorder), PC.
6 Press the EXIT button to exit.

Storing Channels Automatically

Not available in DTV or external input mode.
You can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ENTER/OK button again. The available countries are
listed.
4 Select your country by pressing the ▲ or ▼ button, then press
the ENTER/OK button.
Even though you have changed the country setting in this
menu, the country setting for DTV is not changed. Use the Plug & Play function to change the country setting for DTV. (Refer to pages 10 to 12)
5 Press the ▲ or ▼ button to select Auto Store, then press the
ENTER/OK button.
6 Press the ENTER/OK button again to start the search.
The search will end automatically.
To stop the search before it has finished, press the MENU
or the ENTER/OK button.
T V
T V
Input
Edit Name
Channel
Channel
Auto Store
Start
Enter
TV
Enter
−−−−
VCR
−−−−
DVD
D-VHS
Cable STB
HD STB
Satellite STB
AV Receiver
Enter
Belgium
United Kingdom
France
Germany
Italy
Netherlands
Spain
Switzerland
United Kingdom
Enter
United Kingdom
Enter
Return
Return
Return
Return
Return
Source List : Edit Name
Move
Ext.1 : −−−−
Ext.2 : Component : −−−− PC : −−−−
HDMI : −−−−
Move
Country :
Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move
P 1 C -- 40 MHz 0 %
English - 14

Storing Channels Manually

Not available in DTV or external input mode.
You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.The programme number of each stored channel which you wish
to identify.
T V
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Channel
United Kingdom
1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Manual Store, then press
T V
the ENTER/OK button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER/OK button.
5 When you are satisfied with your setting, press the ENTER/OK
Move
Enter
P 1
Return
Manual Store
Programme : Colour System : Auto Sound System : BG Channel : C 6 Search : 175 MHz Store : ?
button.
6 Press the EXIT button to exit.
Move
Enter
Programme (Programme number to be assigned to a channel)
Return
− Press the ▲ or ▼ button until you find the correct number. You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
− Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number. You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to OK by pressing the ENTER/OK button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have
been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 15

Adding / Locking Channels

Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add
T V
channels. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel Manager, then
press the ENTER/OK button.
Adding channels
Using the Channel List, you can add channels.
T V
4 Select Channel List by pressing the ENTER/OK button. 5 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,
select a channel to be added, and press the ENTER/OK button to add the channel.
If you press the ENTER/OK button again, the ( ) symbol
next to the channel disappears and the channel is not added.
Locking channels
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio.
6 Press the ▲ or ▼ button to select Child Lock, then press the
ENTER/OK button.
7 Select On by pressing the ▲ or ▼ button, then press the ENTER/OK
button.
8 Press the ▲ or ▼ button to select Channel List, then press the
ENTER/OK button.
9 Move to the ( ) field by pressing the ▲/▼/◄/► buttons, select a
channel to be locked, and press the ENTER/OK button.
If you press the ENTER/OK button again, the ( ) symbol next
to the channel disappears and the channel lock is canceled. A blue screen is displayed when Child Lock is activated.
10 Press the EXIT button to exit.
You can select these options simply by pressing the CH LIST
button on the remote control.
Channel
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move
Channel List Child Lock :
Move
P 1 C 6
Prog.
0 C 1 1 C 6 2 C 5 3 C 8 4 C 11 5 C 22 6 C 26 7 C 36 8 C 52 9 C 24
Add Lock Move Enter
Page
United Kingdom
Enter
Channel Manager
Off
Enter
Channel List
Return
Return
Return
1 / 10
English - 16

Sorting the Stored Channels

Not available in DTV or external input mode.
This operation allows you to change the programme numbers
T V
of the stored channels. This operation may be necessary after using the auto store.
1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Sort, then press the
ENTER/OK button.
4 Select the channel that you wish to move by pressing the
▲ or ▼ button, then press the ENTER/OK button.
T V
5 Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button. Press the ENTER/OK button. The channel is moved to its new position and all other channels are shifted accordingly.
6 Repeat steps 4 to 5 until you have moved all the channels to
the required programme numbers.
7 Press the EXIT button to exit.

Assigning Names to Channels

Not available in DTV or external input mode.
Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Name, then press the
ENTER/OK button.
4 Press the ▲ or ▼ button to select the channel to be assigned
to a new name, then press the ENTER/OK button.
5 Press the ▲ or ▼ button to select a letter, a number, or a
symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank). Move on to the previous or next letter by pressing the ◄ or ► button, then press the ENTER/OK button.
6 Repeat steps 4 to 5 for each channel to be assigned to a new
name.
7 Press the EXIT button to exit.
T V
T V
Channel
United Kingdom
Enter
Sort
Enter
Channel
United Kingdom
Enter
Name
Enter
Return
Return
Return
Return
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move
Prog. Ch. Name
0 C- - −−−−− 1 C04 −−−−− 2 C05 −−−−− 3 C08 −−−−− 4 C09 −−−−− 5 C11 −−−−− 6 C13 −−−−− 7 C15 −−−−− 8 C17 −−−−− 9 C18 −−−−−
Move
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move
Prog. Ch. Name
0 C- - −−−−−
1 C04 −−−−−
2 C05 −−−−− 3 C08 −−−−− 4 C09 −−−−− 5 C11 −−−−− 6 C13 −−−−− 7 C15 −−−−− 8 C17 −−−−− 9 C18 −−−−−
Move
English - 17

Fine Tuning Channel Reception

Not available in DTV or external input mode.
If the reception is clear, you do not have to fine tune the
T V
channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Fine Tune, then press the
ENTER/OK button.
4 To obtain a sharp, and clear picture and good sound quality,
press the ◄ or ► button until you reach the optimal setting. Press the ENTER/OK button.
To reset the fine tuning to 0, select Reset by pressing the
▲ or ▼ button. Press the ENTER/OK button.
5 Press the EXIT button to exit.
Fine Tune Store will change the colour of the Channel
OSD (On Screen Display) from White to Red and add the “*” mark.
P 1 * Mono
Picture : Dynamic Sound : Custom SRS TS XT : Off
−−

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.
1 Press the MENU button to display the menu. 2 Press the ENTER/OK button to select Picture. 3 Press the ENTER/OK button again to select Mode. 4 Select the required mode by pressing the ▲ or ▼ button, then
press the ENTER/OK button.
Available modes:
The settings values may vary depending on the input
source. (ex. TV, Component, PC, or HDMI)
Dynamic, Standard, Movie
5 Press the EXIT button to exit.
You can select these options simply by pressing the P.MODE
button on the remote control.
Choose Dynamic for viewing the TV during the day or
➢ 
when there is bright light in the room.
Choose Standard for general TV watching mode. Choose Movie when viewing the movie.
T V
T V
Channel
Fine Tune
Reset
Save
Enter
Picture
Enter
Picture
Cool1
Enter
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move
P 1
Adjust
:
−−
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Size : Auto Wide Screen Mode : 16:9 Digital NR : Auto More
Move
Mode : Dynamic
Contrast 100 Brightness 45 Sharpness 75 Colour 55
Tint G50 R50
Colour Tone :
Detailed Settings
Size : Auto Wide Screen Mode : 16:9 Digital NR : Auto More
Move
United Kingdom
Return
3
Return
Return
Dynamic
Standard
Movie
Return
  
English - 18

Customizing the Picture Settings

Your television has several setting options that allow you to control the picture quality.
1 Press the MENU button to display the menu. 2 Press the ENTER/OK button to select Picture. 3 Press the ENTER/OK button again to select Mode. 4 Select the required mode by pressing the ▲ or ▼ button, then
press the ENTER/OK button.
Available modes:
Dynamic, Standard, Movie
5 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER/OK button.
6 When you are satisfied with your setting, press the ENTER/OK
button.
7 Press the EXIT button to exit. Contrast – BrightnessSharpnessColourTint
In TV mode of the PAL system, you cannot use the Tint
Function.
Contrast – BrightnessColour Tone : PC Mode
Press the ◄ or ► button until you reach the optimal setting.
T V
Mode : Contrast 100 Brightness 45 Sharpness 75 Colour 55
Tint G50 R50
Colour Tone :
Detailed Settings
Size : Auto Wide Screen Mode : 16:9 Digital NR : Auto More
Move
T V
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Size : Auto Wide Screen Mode : 16:9 Digital NR : Auto More
Move
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
Reset: Cancel/OK Select
OK. You can return to the factory defaults picture settings.
The reset function is set for each picture mode and colour tone.
Picture
Dynamic
Cool1
Enter
Picture
Cool2
Cool1
Normal
Warm1 Warm2
Enter
Return
Return
 
Loading...
+ 41 hidden pages