Samsung PRO-SW60P User Manual
66660000----WWWWaaaattttt
t PPPPoooowwwweeeerrrreeeed
t t
d SSSSuuuubbbbwwwwoo
d d
ooffffeeeerrrr
oooo
Your RCA PRO-SW60P 60-Watt Powered
Subwoofer is designed to give you the best
possible low frequency sound quality for
the ultimate home theater experience. You
will be astonished by the realism it adds to
movie sound effects and the power it lends
to all kinds of music.
The subwoofer combines the power of a
built-in 60-watt RMS amplifier with a
responsive, 8-inch paper cone woofer —
all housed in a tuned-port bass-reflex
enclosure to produce tight, floorrumbling, powerful bass (down to 50 Hz)
that you can feel as well as hear! The
POWER indicator lets you see at a glance
when the subwoofer is operating.
Your subwoofer has an adjustable high cut
filter and high and low level inputs,
making it easy to incorporate into existing
systems, or you can use it as an integral
part of a subwoofer/satellite combination.
It also has these features:
Auto On/Off — automatically switches
the PRO-SW60P’s amplifier to standby if
the subwoofer does not receive a signal for
about 11 minutes.
Note: You need speaker wire (not
supplied, available at your local
RadioShack store) to connect the
subwoofer to an amplifier or receiver’s
speaker outputs.
Low Level Input — lets you connect the
subwoofer to an amplifier’s or receiver’s
subwoofer out or pre out jacks. These
inputs automatically sum left and right
channel information.
Note: You need phono cables (not
supplied, available at your local
RadioShack store) to connect the
subwoofer to an amplifier or receiver’s
subwoofer out or pre out jacks.
Vol um e C on tr o l — lets you match the
PRO-SW60P’s output level to your satellite
speakers’ output (if used).
Frequency HZ — controls the high
frequency cutoff point. Rotated fully
clockwise, it cuts high frequencies over
200 Hz. Rotated fully counterclockwise, it
cuts high frequencies over 50 Hz.
Standby Indicator — lights when the
subwoofer is connected to power but not
receiving a signal.
High Level Input — lets you connect the
subwoofer to an amplifier’s or receiver’s
speaker outputs.
WARNING:
shock hazard, do not expose this product to
rain or moisture.
CAUTION:
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER OR BACK. NO USERSERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
!
To reduce the risk of fire or
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN.
TO REDUCE THE RISK
This symbol is intended to alert
you to the presence of uninsulated dangerous voltage within
the product’s enclosure that
might be of sufficient magnitude
to constitute a risk of electric
shock. Do not open the product’s case.
This symbol is intended to
inform you that important operating and maintenance instructions are included in the
literature accompanying this
product.
!
• Unplug the PRO-SW60P’s power cord
from the electrical outlet if it will be
left unused for a long time.
• Only connect this unit to a power
supply of the type described in the
operating instructions or marked on
the unit.
• Route the power-supply cord so it is
not likely to be walked on or pinched
by items placed upon or against it,
especially at plugs, convenience
receptacles, and the point where it
exits from the unit.
• Placing the subwoofer on the same
stand or shelf as your turntable can
result in low frequency rumble or
acoustic feedback.
Cautions:
• To prevent fire or shock, do not
expose this subwoofer to rain or
moisture.
• Do not place the subwoofer with its
metal plate against the floor.
SSSSAAAAFFFFEEEETTTTY
Y IIIINNNNSSSSTTTTRRRRUUUUCCCCTTTTIIIIOOOONNNNSSSS
Y Y
• Never open the cabinet or remove the
metal control panel, as this might
result in electrical shock or damage to
the unit.
• If your PRO-SW60P needs servicing,
contact your local RadioShack store.
• To prevent electrical shock, do not use
this polarized plug with an extension
cord receptacle or other outlet unless
the blades can be fully inserted to
prevent blade exposure.
• Place the subwoofer away from heat
sources such as radiators, stoves, or
other appliances that produce heat.
2
CCCCHHHHOOOOOOOOSSSSIIIING
Cautions:
• To prevent the cabinet from warping
or discoloring, do not place the
subwoofer in a place where it is
exposed to direct sunlight or excessive
humidity.
NG A
A LLLLOOOOCCCCAAAATTTTIIIIOOOONNNN
NG NG
A A
you place the PRO-SW60P at least 4
inches away from the wall, and at least
2–3 feet away from your television or
computer’s disk drive system so the
subwoofer’s magnet will not distort the
colors of your TV picture or erase your
floppy disks.
• Do not place the subwoofer where it
might be knocked over or exposed to
falling objects.
• The metal control panel on the back
of the PRO-SW60P acts as the heat
sink for the subwoofer’s internal
amplifier. Therefore, place the unit at
least 4 inches (10 cm) away from a
wall, and do not let anything come
into contact with this panel.
Where and how you position your
subwoofer greatly affects its bass response.
Adjusting the subwoofer’s volume control
in relation to the left and right speakers
and adjusting the subwoofer’s high cut
filter also affects your speakers’ overall
sound.
Although low frequencies are nondirectional, factors such as room
reflections, standing waves, resonance and
absorption strongly affect your
subwoofer’s performance. For maximum
bass output, place your subwoofer in a
corner. To reduce output, move it away
from corners and back walls. Even slightly
moving the subwoofer can have a major
effect on bass response.
AAAATTTTTTTTAAAACCCCHHHHIIIING
Using the supplied screws, secure the four
protective feet (packed separately) into the
pre-drilled holes at each corner of the
cabinet’s bottom.
CCCCOOOONN
NNEEEECCCCTTTTIIIINNNNG
NNNN
NG FFFFEEEEEEEETTTT
NG NG
G TTTTO
O AAAAN
G G
O O
N
N N
AAAAMMMMPPPPLLLLIIIIFFFFIIIIEEEERRRR
You can connect your PRO-SW60P to an
amplifier/receiver’s subwoofer out or pre
out jacks or speaker terminals.
Notes:
• You can connect your PRO-SW60P to
your TV if it has variable line out
jacks.
• See “Connecting to Subwoofer Out or
Pre Out Terminals”or “Connecting to
Speaker Terminals” on Page 4.
Caution: To avoid any damage to the
subwoofer or amplifier, disconnect power
from your components before making any
connections.
We recommend that you test the
subwoofer in different locations to
determine where the best balance is
between your satellite speakers (if used)
and subwoofer. We also recommend that
3
Loading...