Samsung PL51E450A1FXZP User Manual

Plasma TV

user manual

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎ When usi ng a stand or wall-mo unt, use parts provided by Samsung Elec tronics only.

x If you use parts p rovided by another m anufacturer, it may result in a prob lem with

the produ ct or an inju ry due to the product falling.

✎ The appe arance may differ depen ding on the product. ✎ Be careful when you c ontact the T V because some p arts can be somew hat hot.

Installation with a stand. Installation with a wall-mount.

4inches

Important User Information

• Screen Image retention Do not display a still image (such as that from a video game) on the plasma display panel for

more than a few minutes. Still images can cause screen image retention (burn in). To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the TV may become hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the TV. This is normal and does not indicate any defect or operational failure of unit.

However, children should be prevented from touching the upper part of the TV.

• The TV is making a ‘cracking’ noise.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of the borders on the left, right, top, or bottom of the screen. Playing a DVD or a game console may have a similar effect. Damage caused by the above effect is not covered by the warranty.

• After-images on the Screen. The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level)

pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Warranty Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

4inches

• Caution

The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care. When moving the TV, always have two or more people pick it up and carry it as a safety precaution. Do not lay the TV ﬂat on its face or back.

(Your) Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of its glass panel and component parts during shipment. It is, nonetheless, a fragile piece of electronics that requires careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking the TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer’s warranty.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country

MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com

ARGENTINE 0800-333-3733 www.samsung.com

BRAZIL

CHILE 800-SAMSUNG(726-7864) www.samsung.com

COLOMBIA 01-8000112112 www.samsung.com

COSTA RICA 0-800-507-7267 www.samsung.com

DOMINICA 1-800-751-2676 www.samsung.com

ECUADOR 1-800-10-7267 www.samsung.com

EL SALVADOR 800-6225 www.samsung.com

GUATEMALA 1-800-299-0013 www.samsung.com

HONDURAS 800-7919267 www.samsung.com

JAMAICA 1-800-234-7267 www.samsung.com

NICARAGUA 00-1800-5077267 www.samsung.com

PANAMA 800-7267 www.samsung.com

PERU 0-800-777-08 www.samsung.com

PUERTO RICO 1-800-682-3180 www.samsung.com

TRINIDAD & TOBAGO

VENEZUELA 0-800-100-5303 www.samsung.com

(MEXICO Only) IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V.

AV. PRESIDENTE MASARIK #111 INT701 COL. CHAPULTEPEC MORALES C.P.11570 DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL Tel: 01-55-5747-5100 / 01-800-726-7864

Customer Care Center

0800-124-421 4004-0000

1-800-SAMSUNG(726-7864) www.samsung.com

BN68-03980C-01



Web Site

www.samsung.com

Getting Started

Accessories

• Remote Control & Batteries (AAA x 2)

• Warranty Card / Safety Guide

• Owner’s Instructions

• Power Cord

• Cleaning Cloth

Input Cables (Sold Separately)

• RS232

• Audio

• HDMI

• HDMI-DVI

✎ Check the cable before plug-in

HDMI

USB

Optical

Do not plug cable upside down. Be sure to check before plug-in.

TV Controller

Function menu

MEDIA.P

m R s

Return

TV Controller

Remote control sensor

Power on

Adjusting the volume

Selecting a channel

Using the function menu

Selecting the Media Play

Selecting the MENU ()

Selecting the Source List (s)

Power Off ()

Turns the TV on by pressing the controller in standby mode.

Adjusts the volume by moving the controller from side to side when the power is on.

Selects a channel by moving the controller up and down when the power is on.

Press the controller when the power is on, then the function menu screen appears. If you press it again, the function menu screen disappears.

Selects the MEDIA.P by moving the controller in the function menu screen. The Media Play main screen appears.

Selects the MENU() by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears.

Selects the Source List (s) by moving the controller in the function menu screen. The Source List screen appears.

Selects the Power Off () to turn the TV off by moving the controller in the function menu screen.

• Component

• Composite (AV)

• Coaxial (RF)

Cable Ports

✎ Exits the menu when pressing the controller more than 1 second. ✎ When selecting the function by moving the controller to the up/down/

left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the POWER button. Plug & Play is available only when the Input source is set to TV.

✎ Connecting the power cord and antenna. (refer to ‘Connections’)

Selecting a language

Select Language of the OSD.

Language

   U

Plug & Play





English Español Français

Move EEnter

Select the desired OSD (On Screen Display) language.







Selecting a Home Use mode

• Select the Home Use mode. Store Demo mode is for retail

environments.



• When pressing TV controller, the



function menu screen appears. Select the MENU(m) and press



it more than 5 seconds using the



controller. The Store Demo mode is set. Cancel the Store Demo by selecting Source List(s) and pressing it more than 5 seconds.



In Cable mode, you can select the correct signal source among STD,

HRC, and IRC by pressing the ▲, ▼, ◄ or ► button.

Start







Set the Clock Mode automatically or manually.

• If you select the Auto, set the DST(Daylight Saving Time).

• On the DST screen, press

ENTER, then select whether to

turn DST (Daylight Savings Time) on or off. Select the time zone where you live.



Enjoy your TV.

Store Demo

Plug & Play

Home Use

Move EEnter

Select ‘Home Use’ when installing this TV in your home.

   L

Selecting an antenna

Select the Antenna source to memorize.

  U

Plug & Play

Air Start

Cable

Auto Start





Move EEnter Skip

Setting the Clock Mode

Set the Clock Mode.

Clock Mode : Auto

   E

Plug & Play



 



Enter m Skip

Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.

Press the ENTER button.

- 2 -- 1 -

Connections

• For better picture and audio quality, connect to a digital device using an HDMI cable.

• The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

• Be sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a connection error may occur.

Power Input

VHF/UHF Antenna

ANT OUT

Cable

Media Play

(5V 0.5A)

Using a USB Drive

OPTICAL

Digital Audio System

Audio Device

Using an Optical (Digital) Cable

COMPONENT OUT

Changing the Input Source

Source List

Use to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver.

1. Press the SOURCE button.

2. Select a desired external input source.

■

TV / AV / Component / HDMI1/DVI / HDMI2

✎ You can only choose external devices that are connected to the TV. In the

Sourc e List, connected inputs will be highlighted.

How to use Edit Name

Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button in Source List. The following selections appear under Edit Name:

• PC(D-Sub) and PC/DVI AUDIO IN input are not supported.

• For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

• Connecting through the HDMI cable may not be supported depending on the PC.

• If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

• EX-LINK: Connector for service only.

AV Device (1)

Using a HDMI Cable (up to 1080p)

Blu-ray player / DVD /

HDMI OUT

cable box / sat box

DVI OUT

HDMI OUT

Using a HDMI (to DVI) Cable

R WR B RG

R B

PR PB Y

AV Device (3)

Using a Component Cable (up to 1080p)

■

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make your input source selection easier.

✎ When connecting a PC to the HD MI IN 1(DVI) port with HDMI cable, you

✎ When connecting a PC to the HD MI IN 1(DVI) port with HDMI to DVI

✎ When connecting an AV devices to the HD MI IN 1(DVI) port with HDMI to

AUDIO OUT

R-AUDIO-L

should set the TV to PC mode under Edit Name.

cable, you should set the TV to DVI PC mode under Edit Name.

DVI cable, you should set the T V to DVI mode under Edit Name.

R W RY

W YR

AUDIO OUT

VIDEO OUT

R-AUDIO-L

VCRBlu-ray player

AV Device (2)

Using an Audio/Video

Information

You can see detailed information about the connected external device.

- 3 -

Remote Control

✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Displays and selects the available video sources.

Turns the TV on and off.

Press to directly access to channels.

Press to select additional channels (digital) being

broadcasted by the same station. For example,

to select channel ‘54-3’, press ‘54’, then press

Displays the channel list on the screen.

Views the Media Play.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

P.SIZE: Lets you choose the picture size.

MTS: Press to choose stereo, mono or

Separate Audio Program (SAP broadcast).

values seen on the menu.

Returns to the previous menu.

CC: Controls the caption decoder.

‘-’ and ‘3’.

Adjusts the volume.

Display Modes (HDMI Input)

Optimal resolution is 1024 x 768@60Hz.

Mode Resolution

IBM

MAC

VESA DMT

Horizontal Frequency

640 x 350 31,469 70,086 25,175 +/-

720 x 400 31,469 70,087 28,322 -/+

640 x 480 35,000 66,667 30,240 -/-

832 x 624 49,726 74,551 57,284 -/-

640 x 480 31,469 59,940 25,175 -/-

640 x 480 37,861 72,809 31,500 -/-

640 x 480 37,500 75,000 31,500 -/-

800 x 600 37,879 60,317 40,000 +/+

800 x 600 48,077 72,188 50,000 +/+

800 x 600 46,875 75,000 49,500 +/+

1024 x 768 48,363 60,004 65,000 -/-

1024 x 768 56,476 70,069 75,000 -/-

1024 x 768 60,023 75,029 78,750 +/+

(KHz)

Vertical Frequency (Hz)

Pixel Clock

Frequency (MHz)

MEDIA.P SLEEP

Installing batteries (Battery size: AAA)

Sync Polarity

(H / V)

✎ NOTE

x Use the remote control within 23 feet from TV. x Bright light may affect the performance of the remote control. Avoid

use when nearby f luorescent lights or neon signs.

x The Color and shape may vary depending on the model.

- 4 -

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays the main on-screen menu.

Automatically shuts off the TV at a preset

time.

Displays information on the TV screen.

Exit the menu.

Use these buttons according to the direction on screen.

Use these buttons in a speciﬁc feature.

Channel Menu

❑ Seeing Channels

Channel List

Add, delete or set Favorite channels and use the program guide for digital broadcasts. Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTER button. Then you can watch the selected channel.

6 Air

Added Channels

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air 9 Air 9-1 ♥ TV #9 10 Air 10-1 ♥ TV #10

Air ' Zoom ' Select  Tools ► Next Program

Channel Status Display icons

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

How to Stop Auto Programming

1. Press the ENTER button.

2. A message will ask Stop Auto Program? Select Yes by pressing the ◄ or

3. Press the ENTER button.

11-1 ♥ TV #11

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■ 

Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved programs.

✎ Using the remote control but tons with the Chan nel Lis t

x Green (Zoo m): Enlarges or shrinks a channel number. x Yellow (Selec t): Selects multiple channel lists. Select desired

channels and press the Yellow button to set all the selected channels at the same time. The  mark appears to the left of the selected channels.



(Tools): Displays the C hanne l List option menu. (The Options

menus may differ depending on the situation.)

Icons Operations

A channel selected.



A channel set as a Favorite.



A reserved program.



A program currently being broadcast.



❑ Memorizing channels



✎ When selecting the Cable TV system: Selects the cable system. STD,

HRC and I RC identify various types of cable TV systems. Contact your

local cable company to identify the type of cable system that exists in your par ticular area. At this point, the signal source has been selected.

✎ After all the available channels are stored, it starts to remove scrambled

channels. The A uto program menu then reappears.

✎ Press the ENTER

Progr am.

► button.



button to stop the channel store during Auto

❑ Other Features

Clear Scrambled Channel

This function ﬁlters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

✎ Press the ENTER ✎ This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.

■

Add / Delete: Delete or add a channel to display the channels you want.

✎ All deleted channels will be shown on the All Channels menu. ✎ A gray-colored channel indicates the channel has been deleted. ✎ The Add menu only appears for deleted channels. ✎ Delete a channel from the Ad ded Cha nnels or Favorite menu in the

same manner.

■

Add to Favorite / Delete from Favorite

frequently as Favorites.

■

Timer Viewing: You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time ﬁrst to use this function.

✎ Only memorized channels can be reser ved. ✎ Reser ved programs will be displayed in the Progr amme d menu. ✎ When a digital channel is selected, press the ► (Nex t

Progr am) button to view the digital program. If you select the

ENTER(Schedule) button on the next program, you can set

Timer V iewing directly.

■

Channel Name Edit (analog channels only): Assign your own channel name.

■

Select All: Select all the channels in the channel list.

■

Deselect All: Deselect all the selected channels.

✎ You can only select D esele ct All when one or more channels are

selected.

■

Auto Program: Scans for a channel automatically and stores in the TV.

Programmed

(in Channel List) You can view, modify or delete a show you have reserved to watch.

■

Change Info: Change a show you have reserved to watch.

■

Cancel Schedules: Cancel a show you have reserved to watch.

■

Information: Display a show you have reserved to watch. (You can also change the reservation Information.)

■

Select All / Deselect All: You can select or deselect all channels in the channel list.

Channel Mode

Change the channel mode directly between Added Channels and Favorite Channels.

✎ The Favor ite Cha nnels is enabled only when you set Add to Favori te.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

✎ Fine tuned channels that have been saved are marked with an asterisk

“*” on the right-hand side of the channel number in the channel banner.

✎ To reset the fine-tuning, select Rese t.



button to stop the Cle ar Scr amble d Chann el.



: Set channels you watch

Picture Menu



Mode

Select your preferred picture type.

✎ When connecting a PC, you can only select Entertain and Standa rd.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

■

Entertain: Suitable for watching movies and games.

✎ Only available when connecting a PC.

Cell Light / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎ When connecting a PC, you can only make changes to Cell Light,

Contr ast, B right ness and Sharp ness

Advanced Settings

(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a more precise

picture.

✎ When connecting a PC, you can only make changes to Gamm a and

White Balance.

■

Color Space (Auto / Native): Adjusts the range of colors available to create the image.

■

White Balance: Adjusts the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue)

darkness. R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)

brightness. Reset: Resets the White Balance to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

■

Flesh Tone: Emphasize pink “ﬂesh tone”.

■

Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion.

✎ Available in Sta ndard mode only.

Picture Options

✎ When connecting a PC, you can only make changes to the Col or Tone,

Size and HDMI Black Level.

■

Color Tone (Cool / Standard / Warm1 / Warm2)

✎ Warm1 or Warm2 will be deactivated when the picture mode is

Dynamic.

■

Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magniﬁcation. Zoom2: Use for a stronger magniﬁcation. Wide Fit: Enlarges the aspect ratio of the picture to ﬁt the entire screen. 4:3: Sets the picture to basic (4:3) mode.

✎ Do not watch in 4:3 format for a long time. Traces of borders displayed

on the lef t, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

✎ HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720). ✎ Settings can be adjusted and stored for each ex ternal device you have

connected to an input on the T V.

✎ Picture Sizes available by Input Source:

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3

DTV (1080i, 1080p), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)

■

Digital Noise Filter (Off / Low / Medium / High / Auto) : If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

✎ When the signal is weak, tr y other options until the best picture is

displayed.

■

HDMI Black Level (Normal / Low) : Selects the black level on the screen to adjust the screen depth.

16:9, Wide Fit, 4:3, Screen Fit

✎ Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto) : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i) and

HDMI (480i / 1080i).

■

Screen Burn Protection : To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Time function setting allows you to program the time between movement of the picture in minutes. Your TV also has the following additional screen burn protection functions:

x Pixel Shif t (Off / O n) : Using this function, you can set the T V to move

pixels minutely on the PDP screen in a horizontal or vertical direction to minimize after images on the screen.

✎ Available Pixel S hift S ettin gs and Optimum S ettin gs

Available Settings

Horizontal 0~4(pixels)

Vertical 0~4(pixels) 4

Time (minute) 1~4 min 4 min

✎ The Pixe l Shif t value may differ depending on the monitor size

(inches) and mode.

Optimum Settings for TV/AV/

Component/HDMI

✎ This function is not available in the Scree n Fit mode.

x Scrollin g: This function removes af ter-images on the screen by

illuminating all the pixels on the PDP according to a pattern. Use this function when there are after images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

✎ The after-image removal function has to be executed for a long

time (approximately 1 hour) to effectively remove after-images on the screen. If the af ter-image is not removed after you apply the function, repeat the function again.

✎ Press any key on the remote control to cancel this feature.

x Side Gray (Light / Da rk): When you watch T V with the screen ratio set

to 4:3, using the Side Gray function can prevent damage to the edges of the screen by adjusting the white balance on the extreme left and right sides.

Picture Reset

Resets your current picture mode to its default settings.

■

Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.

- 6 -- 5 -

Sound Menu



Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■

Balance L/R: Adjusts the balance between the right and left speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

(standard sound mode only) SRS TruSurround HD is a patented SRS technology that solves the

problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

✎ You can only select a language from among the ones being broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■

Mono: Choose for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

■

Stereo: Choose for channels that are broadcasting in stereo.

■

SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

✎ Depending on the program being broadcast, you can listen to Mon o,

Stere o or SAP.

Auto Volume

Because each broadcasting station has its own signal conditions, the volume may ﬂuctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater.

■

Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source.

✎ By connecting the TV to a receiver or home theater with D olby Digital

and 5.1ch speakers and selecting D olby Dig ital, you can maximize your interactive 3D sound experience.

■

Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTER when done (0ms ~ 250ms).

Speaker Select

■

Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.

✎ When you set Spea ker Select to Ex terna l Speake r, the TV’s

speakers are turned off. You will hear sound through the external speakers only. When you set Speaker S elect to T V Speaker both the TV’s speakers and the external speakers are on. You will hear sound through both.

✎ When Speaker S elect is set to External Speake r, the VOLUME and

MUTE buttons will not operate and the sound settings will be limited.

✎ If there is no video signal, both the TV’s speakers and the external

speakers will be mute.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Setup Menu

❑ Setting the Time

Time

✎ The current time will appear ever y time you press the INFO button.

■

Clock: Setting the clock is for using various timer features of the TV.

✎ If you disconnect the power cord, you have to set the clock again.

Clock Mode: Set the current time manually or automatically. Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

✎ Available only when Clock Mode is set to Manual.

Time Zone: Select your time zone. DST (Daylight Saving Time): Switches the DST (Daylight Saving Time)

function on or off.

✎ DST and T ime Zone function is only available when the Clock Mo de

is set to Auto.

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the clock ﬁrst.

■

On Time / Off Time: Set the hour, minute, am/pm and Activate / Inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

■

Volume: Set the desired volume level.

■

Contents: When the On Time is activated, you can turn on a speciﬁc channel or play back contents such as photo or audio ﬁles.

- TV/USB: Select TV or USB. (Make sure that an USB device is

- Antenna: Displays the current antenna source.

- Channel: Select the desired channel.

- Music/Photo: Select the folder containing MP3/JPEG ﬁles on the

■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.

- 7 -



✎ To cancel the Sleep Timer, select Off.

connected to your TV.)

USB device.

✎ The maximum displayed number of files, including sub folders, in one

folder of USB storage device is 2000.

✎ The media may not be playing smoothly when using the device lower

than USB 2.0.

❑ Other Features

Program Rating Lock

The Program Rating Lock feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identiﬁcation number) before any of the Program Rating Lock restrictions are set up or changed.

✎ Progr am Rati ng Lock is not available in HD MI or Com ponent mode. ✎ The default PIN number of a new TV set is “0-0- 0-0”.

■

Program Rating Lock: You can block rated TV Programs.

■

TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching.

■

MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which ﬁlms are appropriate for children.

■

Canadian English: You can block TV programs depending on their Anglophone Canadian.

■

Canadian French: You can block TV programs depending on their French Canadian rating.

■

Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

■

Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in

Conﬁrm New PIN. When the Change PIN screen disappears, press the

OK button. The TV has memorized your new PIN.

✎ If you forget the PIN, press the remote-control buttons in the

following sequence, which resets the pin to “0 -0-0-0” : PO WER (off) → MUTE → 8 → 2 → 4 → POWER (on)

Language

Set the menu language.

✎ Choose between Engli sh, Espa ñol and Fr ançai s.

Game Mode

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

✎ Precautions and limitations for game mode

x To disconnect the game console and connect another external

device, set Game Mode to Of f in the setup menu.

x If you display the TV menu in Gam e Mode, the screen shakes

slightly.

✎ Game Mo de is not available when the input source is set to T V. ✎ After connecting the game console, set Ga me Mode to O n.

Unfortunately, you may notice reduced picture qualit y.

Caption

(On-Screen Text Messages)

■

Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

✎ The Cap tion feature does not work in Compon ent or HD MI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions function works with digital channels.

✎ Service1~6 may not be available in digital caption mode depending

on the broadcast.

■

Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard. Font Style: Options include Default and Styles 0 to 7. The default

is Style 0. Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.

✎ Digit al Capt ion Opt ions are available only when Defa ult and

Service1 ~ Ser vice 6 can be selected in Captio n Mode.

✎ The Foreground and Background cannot be set to have the same

color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎ The Mel ody does not play.

x When no sound is output from the T V because the MUTE button

has been pressed.

x When no sound is output from the T V because the volume has been

reduced to minimum with the VOL – button.

x When the TV is turned off by Sleep Timer function.

Auto Protection Time

■

Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen remains idle with a still image for a certain period of time deﬁned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) : This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

■

Eco Sensor (Off / On) : To enhance your power savings, the picture settings will automatically adapt to the light in the room.

✎ If you adjust Cell L ight in the Picture menu, the Eco Sensor will

be set to Of f.

Min Cell Light : When Eco Sensor is On, you can manually adjust the minimum screen brightness.

✎ If Eco Sensor is On, the display brightness may change (become

slightly darker or brighter) depending on the surrounding light intensity. You can control the screen’s minimum brightness with the Min Cel l Light function.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby mode, if no picture is being received.

✎ Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned off when no user operation is received for 4 hours.

- 8 -

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album Pop 2010

4.2MB

01:10 / 04:02

SUM

►

1/1

Movie 01.avi

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem continues to occur, check the color pattern.

■

Sound Test: Use the built-in melody sound to check for sound problems.

■

Signal Strength: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎ The PIN input screen appears before the setup screen. ✎ Enter your 4-digit PIN. Change the PIN using the Ch ange PIN

option.

Software Upgrade

Software Upgrade can be performed by downloading the latest ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

Media Play

Enjoy photos, music and/or movie ﬁles saved on a USB Mass Storage Class (MSC) device.

❑ Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie ﬁles to the USB jack on the back of the TV.

3. When USB is connected to the TV, you can select Media Play (USB) in Application menu.

❑ Using the Media Play Menu

Media Play

Videos

■

Change Device

1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER button.

2. Press the ▲ or ▼ button to select Media Play (USB), then press the

ENTER button.

3. Press the ◄ or ► button to select an icon (Videos, Music, Photos, Settings), then press the ENTER button.

✎ It might not work properly with unlicensed multimedia files. ✎ Need-to-Know List before using Me dia Play ( USB)

x The file system supports FAT16, FAT32 and NTFS. x Certain t ypes of USB Digital camera and audio devices may not be

compatible with this TV.



Enter  Return

MEDIA.P

x Media Play only supports USB Mass Storage Class (MSC) devices.

MSC is a Mass Storage Class Bulk-Only Transport device. E xamples of MSC are Thumb drives and Flash Card Readers. Devices should be connected directly to the TV’s USB port. USB HDD is not supported.

x Before connecting your device to the TV, please back up your files

to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

x A USB device that requires high power (more than 0.5A) may not be

supported.

x Do not disconnect the USB device while it is loading. x The higher the resolution of the image, the longer it takes to display on

the screen.

x The maximum supported JPEG resolution is 15360 x 8640 pixels. x If a ﬁle is corrupted or the TV does not support the ﬁle type, the “Not

Supported File Format” message appears.

x The TV cannot play MP3 ﬁles with DRM that have been downloaded

from a for-pay site. Digital Rights Management (DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and comprehensive way, including protecting the rights and interests of content providers, preventing illegal copying of contents, and managing billings and settlements.

x PTP device is not supported. x If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be recognized or may malfunction.

x If the TV has no input during the time set in Auto Protection Time, the

Screensaver will run.

x The power-saving mode of some external hard disk drives may be

released automatically when your connect them to the TV.

x If you use a USB extension cable, the TV may not recognize the USB

device or may not be able to read the ﬁles on the device.

x If a USB device connected to the TV is not recognized, the list of ﬁles

on the device is corrupted, or a ﬁle in the list is not played, connect the USB device to a PC, format the device, and check the connection.

x If a ﬁle you deleted from the PC is still found when you run Media Play,

use the “Empty the Recycle Bin” function on the PC to permanently delete the ﬁle.

x Photos only supports sequential jpeg format. x The scene search and thumbnail functions are not supported in the

Videos.

x If the number of ﬁles and folders saved on a USB storage device is

approximately over 4000, the ﬁles and folders may not appear and some folders may not be opened.

x The maximum displayed number of ﬁles, including sub folders, in one

folder of USB storage device is 2000.

x The media may not be playing smoothly when using the device lower

than USB 2.0.

Videos



Pause  Jump  Tools  Return

1. Press the ◄ or ► button to select Videos, then press the ENTER button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired video in the ﬁle list.

3. Press the ENTER button or  (Play) button.

- The selected file is displayed on the top with its playing time.

- If video time information is unknown, playing time and the progress

bar are not displayed.

- During video playback, you can search using the

✎ In this mode, you can play movie clips contained in a game, but you

cannot play the game itself.

◄

and ► button.

y Supported Subtitle Formatsw

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

y Supported Video Formats

File

Container Video Codec Resolution

Extension

*.mp4 MP4

*.avi

AVI,

*.mkv

MKV

*.asf

ASF

*.wmv

*.ts

*.trp

*.tp

*.m2ts

*.dat

*.mpg

*.mpeg

*.vob

*.3gp 3GPP

*.ﬂv

ﬂash

*.swf

formats

DivX

3.11/4.x/5.1

MPEG4 SP

DivX 3.11

MPEG4 SP

H. 264 BP / MP / HP

MPEG4 SP

Sorenson

1920x1080 6~30 30Mbps

/6.0

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

DivX

1920x1080 6~30 30Mbps

/6.0

1920x1080 6~30 30Mbps

/ ASP

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

/ 4.x /5.1

1920x1080 6~30 30Mbps

/ 6.0

1920x1080 6~30 30Mbps

/ ASP

H.264 1920x1080 6~30 30Mbps

MPEG2 1920x1080 6~30 30Mbps

1920x1080 6~30 30Mbps

MPEG1 1920x1080 24/25/30 30Mbps

MPEG2 1920x1080 24/25/30 30Mbps

1920x1080 6~30 30Mbps

/ ASP

H.264 1920x1080 6~30 30Mbps

1920x1080 6~30 30Mbps

H.263

Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

MP3 /

ADPCM /

AAC

MP3 / AC3

/ LPCM / ADPCM / DTS Core

MP3 / AC3

/ LPCM /

ADPCM / WMA /

WMA Pro

AC3 / AAC

/ MP3 /

DD+ /

HE-AAC

AC3 / MPEG / LPCM /

AAC

MP3

Other Restrictions

• Video content will not play, or not play correctly, if there is an error in the content or the container.

• Sound or video may not work if the contents have a standard bit rate/ frame rate above the compatible Frame/sec listed in the table above.

• If the Index Table is in error, the Seek (Jump) function is not supported.

• The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.

• Video content can not be played, if there are many contents in one ﬁle.

Video Decoder

Supports up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. MPEG4 SP, ASP : – Below 1280 x 720: 60 frame max – Above 1280 x 720: 30 frame max H.263 is not supported. GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is

not supported) WMA Lossless is not supported.

Music

Playlist



Pause  Jump  Tools  Return

1. Press the ◄ or ► button to select Music, then press the ENTER button

in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired Music in the ﬁle list.

3. Press the ENTER button or  (Play) button.

✎ During music playback, you can search using the ◄ and ► button. ✎



(REW) and  (FF) buttons do not function during play.

✎ Only displays the files with MP3 and PCM file extension. Other file

extensions are not displayed, even if they are saved on the same USB device.

✎ If the sound is abnormal when playing MP3 files, adjust the Equalizer

in the Sou nd menu. (An over-modulated MP3 file may cause a sound problem.)

Photos

Normal



1. Press the ◄ or ► button to select Photos, then press the ENTER button

2. Press the ◄/►/▲/▼ button to select the desired photo in the ﬁle list.

3. Press the ENTER button or  (Play) button.

Pause  Previous/Next  Tools  Return

in the Media Play menu.

✎ NOTE

x While a photo list is displayed, press the

on the remote control to start the slide show.



(Play) / EN TER button

x All files in the file list section will be displayed in the slide show. x During the slide show, files are displayed in order.

- 10 -- 9 -

x During the slide show, you can adjust the slide show speed using (π)

(REW) or (µ) (FF) button.

x You can move to other file using ◄ or ► button.

✎ Music files can be automati cally played during the Slide Show if the Backgr ound

Music is set to On.

✎ The Mod e in Backgr ound Mu sic cannot be changed until the BGM has finished

y Supported Photo Formats

Image Photo Resolution

JPEG

Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

y CMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

■

Playing selected video/music/photo ﬁles

1. Press the Yellow button in the ﬁle list to select the desired ﬁle.

2. Repeat the above operation to select multiple ﬁles.

✎ NOTE

x The



mark appears to the left of the selected files.

x To cancel a selection, press the Yellow button again. x To deselect all selected files, press the TOOLS button and select

Desel ect All.

3. Press the TOOLS button, and then select Play Selected Contents.

■

Playing the video/music/photo ﬁle group

1. While a ﬁle list is displayed, move to any ﬁle in desired group.

2. Press the TOOLS button, and then select Play Folder.

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a ﬁle, press the TOOLS button.

Category Operation Videos Music Photos

Title You can move the other ﬁle directly.

Repeat Mode You can play movie and music ﬁles repeatedly.

Picture Size You can adjust the picture size to your preference.

Picture Mode You can adjust the picture setting.

Sound Mode You can adjust the sound setting.

Subtitle Setting

Audio Format You can select the digital audio output format.

Audio Language

Stop Slide Show / Start Slide Show

Slide Show Speed

Background Music

Zoom You can zoom into images in full screen mode.

Rotate You can rotate images in full screen mode.

Information You can see detailed information about the played ﬁle.

You can play the video with Subtitles. This function only works if the subtitles are the same ﬁle name as the video.

You can change the audio language if the video has more than one language.

You can start or stop a Slide Show.

You can select the slide show speed during the slide show.

You can set and select background music when watching a Slide Show.



 



 

  



  

Settings

Using the Setup Menu

■

DivX® Video On Demand : Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation ﬁle. Once you play it using Media Play, the registration is completed.

✎ For more information on DivX® VOD, visit “http://vod.divx.com”.

■

Information: Select to view information on the connected device.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions

provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎ The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎ NOTE

x Standard dimensions for wall mount kits are shown in the table below. x When purchasing our wall mount kit, a detailed installation manual and

all par ts necessary for assembly are provided.

x Do not use screws that do not comply with the VESA standard screw

specifications.

x Do not use screws that are longer than the standard dimension or do

not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

x For wall mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on the wall mount specifications.

x Do not fasten the screws too firmly. This may damage the product or

cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

x Samsung is not liable for product damage or personal injury when a

non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

x Do not mount the TV at more than a 15 degree tilt. x Always have two people mount the T V on a wall.

Product

PDP-TV



- 11 -

Family

TV size in

VESA scew hole specs

inches

43~51 400 X 400

60~64 600 X 400

(A * B) in millimeters

Standard

Screw

M8 4

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Quantity

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

✎ Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

1. Drive the screws into the clamps and ﬁrmly fasten them onto the wall. Make sure the screws are ﬁrmly ﬁxed into the wall.

2. Put the screws into the clamps, and then fasten the screws onto the TV again.

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the wall with a strong cable and then tie the string tightly.

✎ Verify all connections are properly secured. Periodically check the

connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

✎ Install the TV close to the wall so that it does not fall. ✎ It is safe to connect the string so that the clamps fixed on the wall

are equal to or lower than the clamps fixed on the T V. Untie the string before moving the T V.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically ﬁx the system when using it in a public place. Refer to the manual provided with the Kensington Lock for additional information on proper use.

✎ Please find a “

beside the “” icon.



” icon on the rear of the TV. The Kensington slot is

✎ The position and color may differ depending on the model.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object such as

desk or chair.

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product.

4. Lock the lock.

✎ These are general instructions. For exact instructions, see the User

manual supplied with the locking device.

✎ The locking device has to be purchased separately. ✎ The location of the Kensington slot may be different depending on the

TV model.

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung. com, then click on Support, or call Samsung customer service.

Problem Possible Solution

Flickering and Dimming If your Samsung Television is ﬂickering or dimming sporadically, you may need to disable some of its energy efﬁcient

Component Connections / Screen Color

Screen Brightness If you ﬁnd that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn these features off or on.

y Energy saving : User Menu → Setup → Eco Solution → Energy Saving y Eco Sensor : User Menu → Setup → Eco Solution → Eco Sensor

If you ﬁnd that the color on your Samsung television’s screen is not correct or black and White, ﬁrst run a Self Diagnosis on the TV to make sure there are no device issues.

y Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test y If the test is ok, try making sure ; y Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

you should check before calling for a repair.

y Cell light, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try

adjusting options mentioned above.

friendly No Signal Power Off feature. First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with

the TV still on but, turns it off after a certain period of time so as not to waste energy.

y Sleep Timer : User Menu → Setup → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

y No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power y Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off

- 12 -

Problem Possible Solution

Trouble Powering On Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote

Stand Assembly • If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.

Cannot ﬁnd channel • Re-run plug and play.

Poor picture First, perform the Picture Test and to see if your TV is properly displaying the test image.

The TV image does not look as good as it did in the store.

and it will blink about 5 times before turning on.

If you ﬁnd that you are having trouble powering on your Samsung television, there are a number of things to check before making a call to the service department.

y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you

press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Go to MENU - Support - Self Diagnosis - Picture Test If the test image is properly displayed, the poor picture may be caused by the source or signal.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high deﬁnition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after performing Auto program.

✎ Many HD channels are up scaled from SD(Standard Definition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock error, small block, dots, pixelization.

Color is wrong or missing. • If you’re using a Component connection, make sure the component cables are connected to the correct jacks.

There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

There is a dotted line on the edge of the screen.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1

When changing channels, the picture freezes or is distorted or delayed.

Sound Problem First of all, please perform the Sound Test to conﬁrm that your TV audio is properly operating.

There is no sound or the sound is too low at maximum volume.

The picture is good but there is no sound.

The speakers are making an inappropriate noise.

No Picture, No Video

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Incorrect or loose connections may cause color problems or a blank screen.

• Adjust Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )

• Try resetting the picture to view the default picture setting. (go to MENU - Picture - Picture Reset)

• If the picture size is set to Screen Fit, change it to 16:9.

• Change cable/satellite box resolution.

on the TV.

• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes)

• Set output resolution of the cable box to 1080i or 720p.

(go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may caused by the source or signal.

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• Reboot the connected device by reconnecting the device’s power cable.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

• Perform the Sound Test as explained above.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to ‘Remote control does not work’ below.

Problem Possible Solution

The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.

There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

RF(Cable/Antenna) Connection

The TV is not receiving all channels. • Make sure the coaxial cable is connected securely.

No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.

The picture is distorted: macroblock, error, small block, dots, pixelization.

Others

Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection.

Plasma TV is making humming noise. • Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are

The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology.

The remote control does not work. • Replace the remote control batteries with correct polarity (+/–).

The cable/set top box remote control does not turn the TV on or off, or adjust the volume.

A “Mode Not Supported” message appears.

Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

There is a plastic smell from the TV. • This smell is normal and will dissipate over time.

TV Signal Strength is unavailable in the Self Diagnosis Test menu.

TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.

The Channel menu is grey out (unavailable).

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

• Please try Auto Program to add available channels to the channel list. go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC)

• Verify the antenna is positioned correctly.

• Some channels may not have caption data.

• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the settop-box has a grounding issue. Replace the Component video cables with an HDMI connection.

used to create the images on the screen.

• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower.

• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also, try rerouting your connection cables.

• An improperly installed of wall mount can also create excessive noise.

• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

• Adjust the picture size option on your external device or change the TV to full screen.

Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The regular, slight movement of the picture reduces screen burn in.

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the SAMSUNG TV code.

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution settings in this manual.

Component.

• Caption must be activated on the external device.

• This function is only available for digital channels from an Antenna / RF/Coax connection.

• The Channel menu is only available when you select the TV source.

- 14-- 13 -

Problem Possible Solution

Your settings are lost after 30 minutes or every time the TV is turned off.

You have intermittent loss of audio or video.

You see small particles when you look closely at the edge of the frame of the TV.

POP (TV’s internal banner ad) appears on the screen.

• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTER.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

• This is part of the product’s design and is not a defect.

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

✎ Some functions and pictures shown in this manual are available on specific models only. ✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.

Storage and Maintenance

✎ If you attached some stickers on the T V screen, it remains some debris after removing the sticker. Please clean it to watch T V. ✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a

soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, ﬁre, or electric shock.

Clean the product with a soft cloth dampened with in a small amount of water. Do not use a ﬂammable liquid (e.g. benzene, thinners) or a cleaning agent.

License

TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.

TheaterSound technology is incorporated under licence from SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and delivering rich bass and clear dialog.

DivX Certiﬁed® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofﬁcial DivX Certiﬁed® device that plays DivX video. Visit divx. com for more information and software tools to convert your ﬁles into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certiﬁed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http:// opensource.samsung.com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss. request@samsung.com).

■

This product uses some software programs which are distributed under the Independent JPEG

Group. ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation ﬁles (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

- 15 -

Speciﬁcations

Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Model Name PL43E450 PL51E450

Display Resolution 1024 x 768

Screen Size (Diagonal)

Sound Output 10W x 2

Dimensions (WxDxH) Body

With stand

Weight Without Stand With Stand

43" Class

(43,0" measured diagonally)

39,8 x 2.2 x 24,5 inches

(1011,8 X 56,0 X 622,4 mm)

39,8 x 10,3 x 26,6 inches

(1011,8 X 262,0 X 675,9 mm)

31,3 Ibs (14,2 kg) 33,9 Ibs (15,4 kg)

✎ Design and specifications are subject to change without prior notice. ✎ This device is a Class B digital apparatus. ✎ For information about power supply, and more about power consumption, refer to the label attached to the product.

✎ Typical power consumption is measured according to Energy Star Program requirements for Televisions.

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C ) 5% to 95%, non-condensing

- 16 -

(50,6" measured diagonally)

46,7 x 2,2 x 27,8 inches

(1187,8 X 56,0 X 706,6 mm)

46,7 x 10,3 x 29,9 inches

(1187,8 X 262,0 X 760,1 mm)

51" Class

43,2 Ibs (19,6 kg) 45,8 Ibs (20,8 kg)