Samsung OfficeServ 7000iDCS Quick Reference Manual

The display on your Samsung iDCS phone includes
an interactive menu, providing easy access to a wide
variety of features. To access these features, simply
press the button located directly beneath the feature
label on the display. This buttons are referred to as
“soft keys” To display more features, press the
SCROLL button when “à” is displayed.

LABEL refers to a button on the phone
TEXT refers to an option on the display menu.
It may be necessary to press the SCROLL button to
display the desired feature.
DS refers to a direct station button, typically labeled
with the names and extension of other users.
EXTN refers to an extension number.
CALL buttons are color-coded. Green indicated your
call. Red indicates another extension’s call. Yellow
indicates a recall from hold.
SHADED ITEMS are for users of phone models
iDCS-18D or iDCS-28D only.

Making Calls

Place a Call - 9 + telephone number.
Call Log – CALL LOG or Õ 1 9 + OUT or IN +

VOLáâ to select one of your recently dialed num­bers + DIAL, or select NND to view date/time of call.

Phonebook – PHONEBOOK or Õ 0 +

PERS or SYS or STN + first letter of party’s name
+ VOLáâ + DIAL.

Speed Dial – SPEED or 1 6 + a speed dial bin

number (00 to 49 or 500 to 999). If your phone is
configured with one-touch speed dial buttons, sim­ply press the button instead.

Processing Calls

Answer Call Ringing at Your Phone – lift handset

or press ANS/RLS .

Answer Call Ringing at Another Phone using DS

– press flashing DS button.

Answer Call Ringing at Another Phone w/o DS –

press RING P/U or Õ 6 5 + EXTN.

Place Call On Hold – HOLD and hang up.
Place Call on Exclusive Hold – HOLD HOLD and

hang up. Can be retrieved from your phone only.

Retrieve Call from Hold – press flashing CALL but-

ton.

Retrieve Call on Hold at Another Extension –

HOLD P/U or Õ 1 2 + EXTN.

Transfer Call Using DS Button – Press DS, an-

nounce call and hang up. For a blind transfer, do
not announce call. Just hang up after pressing DS.

Transfer Call w/o DS button – TRANSFER +

EXTN.
Cancel Transfer – Press TRANSFER or CALL.
Place Call on Hold at Another Extension –

TRANSFER + EXTN. Announce Call. HOLD. This

can also be performed if destination extension is

busy.

Transfer Call to Busy Extension – TRANSFER +

EXTN (receive busy) + Hang up. Call will ring

through to busy Extension.
Park a Call – TRANSFER + 1 0 * . Read display

to determine park orbit where call was parked.
Pickup a Parked Call – 1 0 + park orbit 0-9

Intercom Calls

Calling Another Extn using DS Button – Press DS .
Calling Another Extn w/o DS Button – dial EXTN.
Busy Extension Callback – Dial busy extension.

Hear busy signal. Press CBK. Your phone will ring

when the extension becomes idle.
Busy Extension Camp On – Call busy extension.

Hear busy signal. Press CAMP. You will hear rin g-

ing tone and dialed extension will ring.

Paging – Dial 5 1 9 9 . Announce after tone.
Internal Paging – * 5 5 + single digit zone 1 - 4.

Announce after tone.

Convenience Features

Station Ring Group Log In/Out – dial * 5 3

+

group number + IN or OUT. (or 1 or 0)

Do Not Disturb – DND or dial Õ 4 0 1

. To

clear DND, press DND or dial Õ 4 0 0 .

One-Time DND – (requires DND

button). During call,

press DND

. After completion of call, DND will

automatically deactivate.

Group Listen – with call on handset, press LISTEN.
Conferencing – on first call. Press CONF

. Make next

call. Press CONF. Press CONF

again to connect all

parties. Process prior to final CONF

button may be

repeated to create up to a five-party conference.

Handset Volume – while on a call, use VOLáâ

to

adjust your receiver volume.

Speaker Volume – while using the speakerphone,
use VOLáâ to adjust speakerphone volume.

Station Volume – with your phone idle and on-

hook,

you may preset your various volume levels by

pressing TRANSFER + 1 1 4 and u

sing

VOLáâ

to select the item you wish to preset.

Press the right

most softkey to move the cursor to

the current level, then press VOLáâ

to adjust the

level. Press TRANSFER

again to finish. Volume

controls which you can preset are: Ringing, Off­Hook Ringing, Handset, Speakerphone, Back­ground Music, and Paging.

Voicemail Features

(Refer to voicemail quick reference guide for descrip­tion of voicemail features & usage. This section only
describes the buttons on your telephone related to
voicemail)

Access Voicemail – VOICEMAIL or dial voicemail
extension number 5050.

Transfer Call to User’s Voicemail – VM XFER +
DS or dial EXTN + hang up.

Send Ringing Call to Voicemail – while call is ring­ing, press # .

Customizing Your Telephone

Programming Personal Speed Dial – with your

phone idle and your handset on-hook, press
TRANSFER + 1 0 5 + bin number (00 -49) +

number as you would dial it manually +
TRANSFER. Note: your phone may be equipped

with from 0 to 50 speed dial bins. Default setting is
10 bins per phone.

Programming Speed Dial Names – with your phone

idle and handset on-hook, press TRANSFER + 1
0 6 + bin number (00-49). Use the digits on your
dial pad and VOLáâ to enter the name. HOLD
erases.

Programming Key Extenders – certain buttons,

such as DS, SPEED and GROUP IN/OUT buttons
allow the programming of an “extender”. This speci­fies the extension, bin or group number of a button.
To change an extender, with your phone idle and
handset on-hook, press TRANSFER 1 0 7 +

the button you wish to program + extender data +
TRANSFER. Example: to program a DS key for ex-

tension 201, press TRANSFER + 1 0 7 + DS +
2 0 1 + TRANSFER.

Selecting a Ring Frequency – with your phone idle

and handset on-hook, press TRANSFER + 1 1 1
and use VOLáâ to select a ring frequency. Press
TRANSFER again to finish.

Setting Intercom Answer Mode – your phone offers

three intercom calling modes: AUTO is the default
mode and offers full handsfree operation; RING re­quires you to answer intercom calls manually; and
VOICE offers automatic voice announcement but
not auto hands-free answer back. You must either
lift your handset or press ANS/RLS to activate your
microphone. To change your Intercom Answer
Mode, with your phone idle and your handset on­hook, press TRANSFER + 1 0 3 , use VOLáâ
to select a mode and finish by pressing
TRANSFER.

Changing Your Station Name – with your phone

idle and handset on-hook, press TRANSFER + 1
0 4 . Use your dial pad and VOLáâ to enter a
new name. HOLD erases.

Paging Zones:

1
2
3
4
5
6
7
8
9 All External Loudspeakers
0 All Telephones
* All Telephones & Loudspeakers

Station Groups:

5000 Operator
5001 Operator Overflow
5157 Business Office
1080 Human Resources
5240 Med / Surg
5002 ICU
5190 RX
5235 Emergency Department

5050 Voice Mail

Feature Access Codes:

10 Call Park / Park Pickup
*12 Hold Pickup
*16 Speed Dial
*17 Saved Number Redial
*19 Call Log
*40 Do Not Disturb
*44 Busy Station Call Back
*45 Busy Station Camp On
*48 Programmed Station Msg
*53 Group In/Out
*55 Internal Page
*65 Ring Pickup
*66 Group Pickup
5199 Hospital Page

OfficeServ 7000
iDCS Telephone

Telephone
Features
Quick
Reference
Guide

For: