AreaWeb Site
North Americahttp://service.samsungportal.com
Latin Americahttp://latin.samsungportal.com
CIShttp://cis.samsungportal.com
Europehttp://europe.samsungportal.com
Chinahttp://china.samsungportal.com
Asiahttp://asia.samsungportal.com
Mideast & Africahttp://mea.samsungportal.com
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
Contrast Ratio : 7000:1 ሪ
Response time : 6ms ሪ
Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component 1,2 / PC mode and Sub picture is available ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelLTF400HF16,SSDZF7,8bit,40,1.07B,16:9,0.46125(H)*0.15375(w,0 to
Contrast Ratio : 5000:1 ሪ
Response time : 5ms ሪ
Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component 1,2 / PC mode and Sub picture is available ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelT460HW03 VL,AU46H3L,8bit,46,16.7M,16:9,0 to
Contrast Ratio : 7000:1 ሪ
Response time : 6ms ሪ
Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component 1,2 / PC mode and Sub picture is available ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelLTF550HJ01,SSTZJS,8bit,55,1.07M,16:9,0.63(H)*0.21((W),0 to
Contrast Ratio : 6000:1 ሪ
Response time : 5ms ሪ
Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component 1,2 / PC mode and Sub picture is available DTV_ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelLTF320HF01 ,32inch, 8bit_16.7M, 16:9, 0.36375(H)*0.36375(V),0 to 50, 12V,
Contrast Ratio : 5000:1 ሪ
Response time : 5ms ሪ
100Hz Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component1, 2 / PC mode and Sub picture is available DTV_ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelT370HW03 VH,AU37H3H,8bit,37,16.7M,16:9,0 to +50,12V,AMVA3,CCFL,120Hz
Contrast Ratio : 6500:1 ሪ
Response time : 4.5ms ሪ
100Hz Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component1, 2 / PC mode and Sub picture is available DTV_ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelV400H1-LH9,CM40H19,10bits,40,1073.7M,16:9,0 to +50,12V,SMVA,CCFL,120Hz
Contrast Ratio : 6500:1 ሪ
Response time : 4.5ms ሪ
100Hz Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component1, 2 / PC mode and Sub picture is available DTV_ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelV460H1-LH7,CM46H17,10bits,46,1073.7M,16:9,0 to +50,12V,SMVA,CCFL,120Hz
Contrast Ratio : 7000:1 ሪ
Response time : 6ms ሪ
Full HDTV (1920 x 1080 pixels) ሪ
PIP(in HDMI1, 2, 3, 4 / Component1, 2 / PC mode and Sub picture is available DTV_ATV / AV 1,2) ሪ
Specications
ItemDescription
LCD PanelLTF550HJ01,SSTZJS,8bit,55,1.07M,16:9,0.63(H)*0.21((W),0 to
Light sensor is used to measure the ambient light level in the enviroment as perceived by the human eye.
It is designed to detect bright and dim ambient light conditions as a means of controlling the brightness of a
LCD display and /or keypad.
* In our product, light sensor operates only "Standard" mode.
* Eco Sensor
step1 : Read the Lux ve times as the unit of 400ms.
step2 : Transfrom the taken Lux to 20 level.
step3 : Get the most frequent grade, them set up the current level.
step4 : If |current level| - |previous level| > 1 , change the level
step5 : Refresh the Backlight set-up as the 200ms.
Lux> 200190...100
Sensor Backlight2019....10
2-15
2. Product specications
2-6. Internet@ TV (Only for c650 model)
2-6-1. Getting Started with Internet@TV
Note
Congure the network settings before using Internet@TV. For more information, refer to “Network Connection”.
Unsupported fonts within the provider’s content will not display normally.
Slow responses and/or interruptions may occur, depending on your network conditions.
English may be only supported in widget service depending on region.
This feature is not available in all locations
If you experience a problem using a widget, please contact the content provider.
Screen Display
Account Login
For a widget with multiple categories, use ◀ and ▶ to access the dierent
categories.
For a more enjoyable widget experience, register and log in to your
account.
For instructions on creating an account, refer to Setting up Internet@TV
Internet@TV ID Create.
1. Press the red button in Internet@TV home page.
2. Select desired User account, then press the ENTER button.
If you want create account, press red button; then create account
OSD window appear.
3. Enter the Password.
When login succeeds, User account will be displayed on the screen.
2-16
2. Product specications
2-6-2. Setting up Internet@TV
Settings
Create IDs and congure Internet@TV settings from this screen.
Highlight Settings using ◀ and ▶ buttons and press the ENTER button.
Account Login
Ticker Autorun may not be supported depending on country. Ticker Autorun (O / On): Enable/disable ticker autorun upon powering on the TV.
Channel Bound Service (O / On): Some channels support widgets as an Internet data service, allowing you to access the Internet service while watching TV.
Only available if supported by the broadcaster.
Reset: Resets Internet@TV settings to factory default settings.Change the Service Lock password
The default password set is “0-0-0-0.”
If you forget the password, press the following sequence of remote control buttons to reset the password to
“0-0-0-0”: POWER (o) MUTE 9 2 8 POWER (on).
Internet@TV ID
You can use this menu when creating, deleting the account. You can control your account including contents site’s account
information.
Account is only for internet@TV.
Create: Create an account and link it with desired service widgets.
Note
Account will be made less than 10. Maximum number of characters is 10.
Manager
- Service Site: Register login information for service sites such as YouTube.
- Change Password: Change account password.
- Delete: Delete the account.
If you forget the password, press the following sequence of remote control buttons to reset the password to
“0-0-0-0”: POWER (o) MUTE 9 2 8 POWER (on).
Service Manager
Delete and lock widgets installed to Internet@TV.
Lock : Lock the widget
Accessing a locked widget requires the password.
Delete: Delete the widget.
Properties
Display information about Internet@TV. Use the Check the speed of your internet connection option to test your network connection.
2-17
2. Product specications
2-6-3. Using the Internet@TV service
Samsung Apps
Various widgets are available from here, organized into dierent categories. Some widgets have a download fee.
Using the colour buttons with the Samsung Apps.
A Red button: To log in to the internet service.
B Green button: To change the view mode. D Blue button: To sort the widgets by Featured, Most Downloaded, Most Recent or Name.
My Page
Displays the application list and your cyber cash balance.
Help
If you questions about Internet@TV, check this section rst.If none of the tips apply, please visit the help website.
2-18
2. Product specications
Yahoo
Internet@TV provides an integrated Internet and television experience powered by the Yahoo!® Widget Engine.
You can monitor nancial stocks, share photos with friends and family, and track news and weather all through the Yahoo!®
Widget Engine.
When running Internet@TV for the rst time, you will be prompted to congure the basic settings.
Screen Display
- Dock Mode
- Sidebar Mode
Editing Snippets in the Dock
2. The snippet moves to the Second position and its tile slides up to show the following help text:
Using the colour buttons with the dock mode.
Delete (red button): To remove the widget. Deleted widgets can be restored from Widget Gallery.
Move (blue button): To rearrange snippets. Done (yellow button): To exit the Edit Snippet menu. When login succeeds, User account will be displayed on the screen.
1. Edit a snippet by focusing on it in the dock and pressing the yellow button.
2-19
2. Product specications
PROFILE Widget
Set up user proles through Prole Widget. You can set up multiple proles, each with its own list of widgets. Use the Switch
Prole option to switch to a dierent user prole.
There must be at least two registered proles. For instructions on adding a prole, refer to Administrative Controls.
Use the Prole Settings option to customize and protect your prole.
- User proles can be customized with a unique name and avatar (a picture used
to represent your prole).
- Your prole’s name and avatar are displayed in the prole snippet in the dock.
- Protect your prole using the Create Prole PIN option.
- When setting up a new PIN, you can set a Security Question.
The Prole Settings option limits access to the prole’s widgets.
- If you forget your Prole PIN, answer your prole’s Security Question.
- New widgets cannot be added to proles with Limit Prole indicator enabled.
Owner PIN must be set to use this feature.
For instructions on setting Owner PIN, refer to Administrative Controls.System Settings allows you to:
- Change your Location and Zip Code (US only) to tailor contents specic to your
region.
- Replay the tutorial that was shown during guided setup.
- Restore Factory Settings resets all widget settings and information.
From the Administrative Controls menu you can:
- Congure Screen Saver timeout to avoid screen burn-in.
- Create Owner PIN and set a Security Question to control other proles.
- Create and congure a new prole with a unique set of widgets.
- Delete an existing prole.
Sign into Yahoo!® from PROFILE Widget using your Yahoo! ID.
- If you have a Yahoo! ID, you can access personalized content using Yahoo! TV widgets.
- You will be automatically signed-in to all installed Yahoo! TV widgets with your prole’s Yahoo! ID.
- If you do not have a Yahoo! account, visit www.yahoo. com to create one.
- You may not be able to log in with an ID created hrough a Yahoo website in a country that does not support
Internet@TV.
About Prole Widget: Press the green button to view a brief description of Prole Widget, Copyright Policy,
Terms of Service, and Privacy Policy.
Widget Gallery
Use Yahoo!® Widget Gallery to add more widgets to your TV. iew available TV widgets in the following categories:
Featured
Displays recommended widgets.
Latest
Displays the most recent widgets.
All widgets
Displays all widgets.
Categories
Displays all widgets by category.
To install a widget, navigate to the detail screen and select Add Widget to My
Prole and press ENTER.
The widget will be installed and become available in the dock.
Widget Gallery Settings
Press the green button.
- About Yahoo! Widget Gallery...: You can view brief information for the Widget Gallery, Copyright Policy, Terms of Service, and Privacy Policy.
- TV Widget Software: Displays the current version of the system software, and installed widgets.
- Create your own widgets through the Developer Settings menu.
For more information, visit our developer site at http://connectedtv.yahoo.com/.
2-20
2. Product specications
2-6-4. Yahoo OOBE (Out Of Box Experience)
Description
A. All users go through OOBE (Guided Setup) to access the dock the rst time.
B. All users must specify a location and accept the TOS (Terms Of Service) before the TV Widgets service are
accessible. The rest of the screens are optional.
IF user input EXIT key, OOBE is goes to hide mode. And user input yahoo key, previous screen is displayed again.
C.
D. Back Ground of OOBE is TV video.
The start page explains the value proposition.The user must select their country before the TOS
is accepted. The user must use the up and down
arrows to navigate to their country before the next
page is displayed.
TOS will updated based on country selected.Optional Screen: users are asked to enter in
a prole name. A default name
(Prole One) is given to them if they
do not create a name.
Tutorial: Screens explaining how the docks work.
2-21
2. Product specications
Tutorial: Screens explaining how the docks work.Tutorial: Screens explaining the sidebar and global
nav buttons.
Final screen before dock comes up.
2-22
2. Product specications
2-7. Media Play
2-7-1 Using the Media Play Function
This function enables you to view and listen to photo(JPEG), audio les(MP3) and movie(MPEG) saved on a USB Mass
Storage Class (MSC) device.
Press the POWER button on the remote control or front panel. 1.
- The TV is powered on.
Connect a USB device containing JPEG and/or MP3 and or/MPEG 2.
les to the usb jack (USB jack) on the side of the TV.
- (If you enter the Media Play mode with no USB device
connected the message “No external storage device found.
Check the connection status.” will appear. In this case, insert
the USB device, exit the screen by pressing the MEDIA.P
button on the remote control and enter the MEDIA.P screen
again.
- MTP (Media Transfer Protocol) is not supported.
- Certain types of USB Digital camera and audio devices may
not be compatible with this TV.
- Media Play only supports USB Mass Storage Class devices
(MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers.
- Please connect directly to the USB port of your TV. If you are
using a separate cable connection, there may be a USB
Compatibility problem.
-
Before connecting your device to the TV, please back up your
les to prevent them from damage or loss of data.SAMSUNG is
not responsible for any data le damage or data loss.
- Do not disconnect the USB device while it is loading.
- MSC supports MP3 and JPEG les, while a PTP device
supports JPEG les only.
- The sequential jpeg format is supported.
- Photo and audio les must be named in English, French or
Spanish. If not, the les can not be played. Change the le
names to English, French or Spanish if necessary.
- The higher the resolution of the image, the longer it takes to
display on the screen.
- The maximum supported JPEG resolution is 15360 x 8640
pixels.
- For unsupported or corrupted les, the “Not Supported File
Format” message is displayed.
- Auto Chaptering function is supported.
* Auto chaptering : When play movie, push enter key.
you can see the snapshot of chapter, and you can skip to
the
chapter using choice the snapshot.
2-23
2. Product specications
2-7-2 Supported Formats
Supported Subtitle Formats•
NameFile extensionFormat
MPEG-4 time-based text.ttxtXML
SAMI.smiHTML
SubRip.srtstring-based
SubViewer.substring-based
Micro DVD.sub or .txtstring-based
Supported Video and Audio Formats•
ContainerVideo DecoderResolutionAudio codec
AVI
ASF
MKV
MP4
3GPP
VRO
VOB
PS
TS
RMVB
FLV
MPEG-4 SP1920 x 1080
MPEG-4 ASP1920 x 1080
Window Media Video
RV3.0/ RV4.0720 x 576
Divx 3.111920 x 1080
Divx 4.x1920 x 1080
Divx 5.11920 x 1080
Divx 6.01920 x 1080
XviD1920 x 1080
H.2641920 x 1080
v9
MPEG21920 x 1080
MPEG11920 x 1080
1920 x 1080
MP3
AC3
LPCM
ADPCM
(MULAW, ALAW)
AAC
HE-AAC
WMA
DD+
MPEG
DTS HD
AMR
QCELP
Real Audio
(RealAudio6 Cook, RealAudio9, 10 RealAudio
Lossless)
Other Restrictions•
Video DecoderAudio codec
Supports until H.264 Level 4.1•
H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and •
AVCHD are not
supported.•
XVID, MPEG4 SP, ASP : •
−Below 1280 x 720: 60 frame max
−Above 1280 x 720: 30 frame max
GMC 2 over is not support.•
Samsung Techwin MJEPG supported only.•
Supports until WMA 7, 8, 9, STD•
WMA 9 PRO is not supported the 2 channel excess •
multi channel or the lossless audio.
Not supported WMA 22050.•
2. Product specications
2-8. AllShare™ (Only for c650 model)
AllShare™ connects your TV and mobile phones and other devices which are compatible with your TV through a
network. On your TV, you can view call arrivals, SMS messages and schedules set on your mobile phones. In addition,
you can play media contents including videos, photos and music saved on your mobile phones or the other devices
(such as your PC) by controlling them on the TV via the network. Additionally, you can use your TV as a monitor for your
mobile when browsing a web page.
* ScreenShare(RUIS/RUIC) : You can see and control the UI of Home Network server supported device in your TV
screen.
Similarly, samsung TV provide the remote controller UI for the Home Network supported devices.
<Connection>
- TV & PC connection
Same as DLNA network setting
- Using ‘Ad-hoc’, TV & Mobile phone connection
Connect wireless usb dongle to TV.1.
Select ‘Wireless’ in Setup-Network Type menu.2.
Move to Setup-Wireless Network Setup menu.3.
Select between ‘Auto’ and ‘Manual’.4.
In case of Manual setting, input value of IP Address, Subnet Mask, Gateway and DNS Server manually. 5.
At this time, IP Address of TV and wireless network device must use same band.
In ‘Select a network’ menu, select registed ‘Ad-hoc network’, or search a new Ad-hoc device.(Blue key)6.
Set IP, SSID, password in Mobile phone setting, refering SSID, password displayed on TV.7.