Samsung N870, N860, N830 User Manual [en, de]
Using Your Documentation
Congratulations on your purchase of a Notebook computer. Whether you are new
to using a portable computer or are an experienced user, this user’s manual can
help you get the most from your computer.
Special Features of the User’s Manual
Three types of messages with icons appear in the manual:
A note informs y ou of special circumstan ces.
A caution warns you of possible damage to equipment.
A warning indicates the possibility of personal injury.
Keys that you need to press to perform certain functions are shown in the manual
enclosed in angle brackets. For example,
<Ctrl>
indicates the control key (Ctrl on the computer’s keyboard).
If you need to press two keys at the same time, the key names are shown joined by
a plus sign. For example,
<Fn+F11>
means that you should press the Fn key and hold it and then press the F11 key.
If you are new to using computers, see “Glossary”. The “Glossary” explains
general computing terms that are used in this manual and tells you about some of
the differences between notebook computers and desktop computers.
Using Your Documentation 1
Using the Software User Documentation
Your computer shipped from the factory with several software programs installed.
The software may include its own online or printed documentation. Refer to the
documentation or the Help options in the software for more information.
The figures illustrated in this manua l may not be identical to
those on your system.
2 Using Your Documentation
Introducing Your Computer
Your computer is a lightweight portable computer that includes features to meet
your computing needs at home or on the road. Your computer has a CD-ROM
drive and a floppy drive within the computer.
Power button
Speaker
Cover latch
LCD
Status lights
Touchpad
Mouse Buttons
Scroll Buttons
Status
lights
Microphone
Figure 1. Front View of Computer
TV-Out
Fan Vent
PC Card
compartment
Kensington
Lock
Battery
compartment
Quick-start
buttons
Speaker
Modem jack
Floppy drive
CD-ROM drive
Headphone jack
External-mic jack
Line-in jack
Figure 2. Left View of computer
Introducing Your Computer 3
LAN port
PS/2™ mouse
& keyboard port
Figure 3. Back View of Computer
Parallel port
Power Connector
Docking
connector
Video port
Serial port
IrDA port
USB port
Mini PCI module
compartment
Flex-Bay latch
Figure 4. Bottom View of Computer
4 Introducing Your Computer
Memory module
compartment
Battery
compartment
Using Your Computer for the First Time
This section gives you detailed information on using your computer for the first
time.
Attaching the AC Adapter
Your computer runs on power from the battery in the computer or from an
electrical outlet. The first time that you use your computer, fully charge the battery
by attaching the power cord to the computer and to an electrical outlet.
All batteries lose their charge if they sit unused for an
extended time period. When not used, battery can discharge
fully in 2 to 3 months. The battery may have discharged in the
time it took for the computer to go from the factory to you.
To attach the power cord:
1. Plug the AC adapter into the power connector on the back side of the computer
(Figure 5).
2. Connect the power cord to the AC adapter and then to an electrical outlet.
Power connector
AC Adapter
Power cord
Figure 5. Connecting the AC Adapter
The battery starts charging as soon as you plug the power cord into an electrical
outlet. The battery charges faster if the computer is turned off during charging.
Using Your Computer for the First Time 5
If the battery is fully depleted and the computer is turned off, the battery charges
in about 3 hours. If the computer is turned on, the battery charges in about 5 hours.
When the battery is charging, the battery charge light is amber. When the battery
is fully charged, the light turns green.
See ”Using the Battery” on page 34 for more information on using your
computer’s battery.
Turning On the Computer
To turn on the computer’s power for the first time:
1. Push to the right and hold the cover latches on the front of the cover. Or pull up
and hold the cover latches.
2. Lift up the cover.
3. Press and then release the power button (Figure 6).
The power light is on when the computer’s power is on.
Power button
Cover latch
Power light
Figure 6. Turning On the Computer’s Power
6 Using Your Computer for the First Time
Understanding POST
When you turn on your computer, a routine called POST (Power-On Self-Test)
automatically runs to test the computer components. Several messages appear on
the screen during POST.
Screen messages are built into the computer to report both normal and abnormal
system conditions. If an error message appears, take any action suggested in the
message. If the message identifies the error condition but does not suggest any
corrective action, write down the message and contact manufacturer or an
authorised service center for assistance. (See ”Troubleshooting” on page 111.)
Adjusting the LC D Display
You may wish to adjust the LCD (Liquid-Crystal Display) when you begin using
your computer. A TFT (Thin-Film Transistor) LCD does not require adjustment
for contrast because the contrast is set to remain at maximum.
To adjust the LCD:
Press <Fn+Right Arrow> to increase the display brightness.
•
Press <Fn+Left Arrow> to decrease the display brightness.
•
Turning Off Your Computer
If your computer has a Window s operating system, turn off
your computer by performing the shutdown procedure
described in this section. Otherwise, you may lose data.
APM(Advanced Power Management) mode
To turn off the computer:
1. Click Start on the taskbar.
2. Click Shut Down.
3. Select the shut down option.
Using Your Computer for the First Time 7
4. Click OK or Yes.
If the operating system is Windows 98/ Me, the computer turns off.
•
If the operating system is Windows NT, you receive a shutdown message
•
and you must press the power button to turn off the computer.
ACPI(Advanced Configuration and Power Interface) mode
Your computer supports ACPI mode. If your operating system supports ACPI and
you want to shut down the computer just by pressing the power button, then follow
next steps to set the menu in Power Management Properties. Also see “Using
Power Management Options” on page 77 and the documentation accompanying
your operating system.
To set the menu;
1. Select Power Management Properties in Control Panel.
2. Select the operations of power button.
Suspend mode: operates as Save to RAM mode. (See ”Suspend Mode” on
•
page 78 for more information.)
Hibernate mode: operates as Save To Disk mode. Set Hibernate submenu to
•
enabled to use Hibernate mode. (See ”Suspend Mode” on page 78 for more
information.)
If the system does not power off, then press and hold the
power button for over 4 seconds.
Restarting Your Computer
You may need to restart (reboot) your computer when installing hardware or
software or if the computer does not respond to your input. A warm (or soft) boot
prompts you to save your files, turns off the computer, and then restarts the
computer. A cold boot turns off the computer without saving your files.
To perform a warm (or soft) boot:
1. Click Start on the taskbar.
2. Click Shut Down.
8 Using Your Computer for the First Time
3. Select the restart option.
4. Click OK or Yes.
5. Save your files if prompted. Your computer reboots.
Do not perform a cold boot unl es s your keyboard and
touchpad have no effect and you cannot pe rform a warm
boot.
When you perfor m a cold bo ot , you lose da ta unless it was
saved to a storage medium.
You can also perform a soft boot by saving your files and pressing
<Ctrl+Alt+Del>. You can perform a cold(or hard) boot by pressing the power
button to turn the computer off, waiting five seconds, and then pressing the power
button to turn the computer on.
Tips for Using Your Computer
The following information helps you avoid potential problems as you use your
computer:
Do not try to disassemble your computer. Opening the
system chassis voids your warranty. Only an authorised
manufacturer service center can replace or add any parts
inside the c hassis.
Follow all the instructions and cautions in your computer user documentation.
•
The LCD has a polarized surface and can be damaged easily. To prevent
•
damage, avoid touching the screen.
Use only approved AC adapters, auto adapters, memory modules and other
•
options.
Because a notebook computer is small and has restricted air flow around
•
components, it is more likely to overheat than a desktop computer. A fan
inside your computer runs when needed to help eliminate heat. Make sure the
fan vent on the right side of your computer is not blocked when you use the
computer. (See Figure 2 on page 3 for the location of the vent.) Occasionally
check the vents and remove any accumulated dust on the outside.
Using Your Computer for the First Time 9
Avoid using or storing the computer in extremely hot or cold areas, such as a
•
car on a hot day. Keep the computer away from heaters and out of direct
sunlight. Exposure to excessive heat may damage computer components.
If you have left your computer in a hot place, let it cool down slowly to room
temperature (with the LCD panel open) before using it.
Do not remove the memory-module compartment door, or try to install a
•
memory module when the computer is on. (See ”Bottom View of Computer”
on page 4 for the location of the door.)
(For information on installing memory modules, see “Installing a Memory
Module” on page 105.)
Set up your computer work area to avoid physical strain. Sit with your back
•
straight and supported by your chair. Adjust your chair or work table so that
your arms and wrists can remain in a relaxed position, parallel with the floor.
Avoid bending or twisting your wrists as you work. Your hands should “float”
slightly above the keyboard. Refer to a book on office ergonomics for more
information on setting up your work area.
Take frequent breaks from working at the computer to rest your eyes and
•
stretch your muscles.
Remember to save your data files frequently and to make backup copies of
•
your files.
Travelling with You r Co mputer
If you are travelling by air, follow these tips:
Take the computer with you as carry-on luggage. Do not check the computer
•
with your baggage.
Allow the computer and disks to go through the X-ray security devices. Do
•
not hand-carry disks through the walk-through metal detectors, which can
cause loss of data.
Make sure that the battery is charged or the power cord is easily accessible.
•
You may be required to turn on the computer for airport security personnel.
Be prepared to turn off the computer during take off and landing.
•
10 Using Your Computer for the First Time
Handl in g Sp il ls
Do not spill anything on your computer. The best way to avoid spills is to avoid
eating and drinking around your computer. If you do spill something on your
computer, turn off your computer, unplug it immediately, and do the following:
If you spill liquid on the keyboard, drain as much of the liquid from the
•
keyboard as possible. Be careful not to let the liquid drip onto the LCD panel.
Allow the system to dry for several days before trying to use it.
If you spill liquid on an external keyboard or keypad, unplug it and drain as
•
much of the liquid as possible. Allow the keyboard to sit at room temperature
for a full day before trying to use it.
Sweet liquids leave a sticky residue tha t may jam the
keyboard despite your efforts to dry it.
If you spill liquid on the LCD panel, clean it immediately with a soft cloth and
•
denatured alcohol. Do not use water, window cleaner, acetone, aromatic
solvent, or dry, rough towels to clean it.
Some liquids damage the po larized LCD scre en. If your
screen is damaged, contact your authorized manufacturer’s
service center for a replacement.
Storing the Computer for Long Per i od s
If possible, leave the power cord connected to the computer and an electrical outlet
when the computer is not in use. This extends the life of the battery and keeps the
battery fully charged.
If you will not be using the computer for a long period of time (a month or more),
you should charge the battery until it is completely full. After you have done so,
remove the battery from the unit.
Using Your Computer for the First Time 11
Using the Keyboard
Your computer has an 87/88-key keyboard (Figure 7). By pressing designated key
combinations, you can have access to all the key functions of a full-sized keyboard.
Function & Special purpose Hot Keys Embeded Numeric Keypad
Function Key
The keys on the keyboard can be grouped into the following categories:
Full-sized Alphanumeric typewriter keys are arranged like a standard
•
typewriter keyboard and are used for text entry. The Windows keys on either
side of the spacebar open Windows menus and perform other special
functions.
Function keys, when pressed together with the <Fn> key, enable special
•
functions.
Cursor and Screen control keys move the cursor. They may perform other
•
functions, depending on your software.
12 Using the Keyboard
Alphanumeric Keys
Figure 7. Keyboard
Although the layout of the keys on your computer’s keyboard
is different from th a t on a desktop co mpute r’s keyboard, the
keyboard feels like a full-sized keyboard when you use it.
Cursor & Screen Control Keys
To clean the computer keyboard, use slightly damp cotton swabs. Scrub the key
and the surface around the keys.
Do not allow liquid to drip into the keyboard or you may
damage the keyboard.
Using the Numeric Keypad
Your keyboard includes a numeric keypad, which is a group of keys that you can
set to type numbers and mathematical symbols, such as the plus sign (Figure 8). A
number or symbol on the right corner of each keypad key shows its numeric
function.
Figure 8. Numeric Keypad
Press <Num Lock> to turn on the embedded numeric keypad. The numeric
functions of the keypad are enabled and the Num Lock light turns on. (See ”System
Status Lights” on page 18 for the location of the Num Lock light.)
While the numeric functions are enabled, you can temporarily return a key to its
normal function by pressing <Fn> and the key. For example to type the letter m,
press <Fn+m>.
To turn the numeric keypad off, press <Num Lock> again. The Num Lock light
turns off.
Using the Keyboard 13
Using Spe cial Fun ction Keys
The <Fn> key activates special functions when it is pressed in combination with
another key. Table 1 shows the special key combinations.
Table 1. Description of Special Function Keys
<Fn> Key
Combination
<Fn+F1>
<Fn+F2>
<Fn+F3> This key combination can generate Euro Mark as other Eurokey.
<Fn+F5>
<Fn+F6>
<Fn+F7>
<Fn+F8>
<Fn+F9>
<Fn+F10>
<Fn+F11>
<Fn+F12>
<Fn+Right
Arrow>
Function
Print screen:
paste into the Paint program.
System request:
CRT/LCD:
monitor, and simultaneous display on both the LCD and the
external monitor.
Gauge:
screen.
The gauge closes in a few seconds, or you can press <Esc> to
close the gauge. (See ”Monitoring the Battery Charge” on page
37 for more information on the battery gauge.)
KeyLock:
Type your password and press <Enter> to unlock the keyboard.
The <Fn+F7> key combination has no effect unless a password is
enabled in System Setup. The Num Lock, Caps Lock, and Scroll
Lock lights blink when the keyboard is locked.
Mute:
Volume down:
Volume up:
Rest:
operation from rest, press the power button. (See ”Using Power
Management Options” on page 77 for more information about the
rest mode.)
Scroll:
the page up or down while the cursor position does not change.
Pressing <Fn+F12> again turns off the scrolling function.
Brightness up:
Takes a picture of the open screen, which you can
Reserved for use in software programs.
Switches the display between the LCD, the external
Displays the battery gauge in the upper-left corner of your
Locks the keyboard and activates password protection.
Turns the audio output on and off.
Decreases the audio volume.
Increases the audio volume.
Puts the computer into Suspend mode. To resume normal
In some applications, sets the cursor-control keys to scroll
Increases the LCD brightness.
14 Using the Keyboard
<Fn+Left
Arrow>
Brightness down:
When you press a function key combination, the system
sound may be temporar ily muted.
Quick S ta rt Bu tt ons
Use Quick start buttons to start the program just by pressing the button.
Decreases the LCD brightness.
User defined program
Internet Explorer
Figure 9. Quick Start Buttons
Internet Explorer: Start Microsoft Internet Explorer.
•
Outlook Express: Start Microsoft Outlook Express to use e-mail service.
•
User defined program: Start user defined program. You can define the
•
Outlook Express
frequently used program with this button, now the ’Calculator’ program is
connected.
Using the Keyboard 15
Using the Touchpad
Your computer is equipped with a touchpad, which is an integrated-pointing
device that is used to perform standard mouse functions (Figure 10). The touchpad
is an advanced and reliable pointing device that works with a touch of your finger.
Touchpad
Scroll buttons
Figure 10. Touchpad
Mouse buttons
Table 2 explains how to use the touchpad.
Press on the touchpad gently. The touchpad responds to light
pressure
Table 2. Using the Touchpad
Mouse Action How To
Move cursor Place your finger on the touchpad and slide your finger
in the direction you want the cursor to move. The faster
you move your finger, the faster the cursor moves
across the screen.
Click Tap the touchpad once with your finger.
Double-click Tap the touchpad twice with one finger.
Scroll up
(Windows 98/ Me)
Scroll down
(Windows 98/ Me)
Place your finger on this button to scroll up the current
window.
Place your finger on this bottom to scroll down the
current window.
You can use the buttons below the touchpad in the same way you would use
standard mouse buttons. For more information on these features and other features
supported by your mouse driver such as button assignment, see the Mouse
properties in the Control Panel.
16 Using t he Touchpad
You can also use the scroll buttons as the way you would use the standard mouse
scroll button. It is convenient to drag the screen in the word processor or in the
internet. The scroll up/down buttons are available only under Windows98/ 2000/
Me with the touchpad driver supplied by supplier.
For information on attaching and using another pointing device or keyboard with
your computer, see “Connecting Peripheral Devices” on page 20.
Using the Touchpad 17
Reading the System Status Lights
System Status lights show the status of computer functions.
Figure 11. System Status Lights
Table 3 describes the meaning of the lights.
Table 3. System Status Light s
Icon Function of Light
E-mail
: Light is on when e-mail arrives.
To work this function out, you have to register E-mail Account on
Regis ter E-m ail A ccount
Internet Launcher to register E-mail account.
window. Select Start > Program > StartUp >
Power light:
blinks when the computer is in Save to RAM mode. (See ”Suspend
Mode” on page 78 for more information on Save to RAM mode.)
Battery char ge light:
information about the battery charge. Light is amber when the
battery is charging normally. Light is green when the battery is fully
charged. (See ”Charging the Battery” on page 34 for more
information about charging the battery.)
18 Readin g the Syst em Statu s Lights
Light is green when the computer’s power is on. Light
When the power cord is connected, light gives
Num Lock light:
Light is on when the embedded numeric keypad is
activated. See ”Using the Numeric Keypad” on page 13 for a
description of the keypad.
Caps Lock light:
Light is on when the caps lock function is activated.
When the function is activated, all alphabetic characters you type will
be in upper case.
Scroll Lo ck ligh t:
Light is on when the scroll lock function is activated.
The scroll lock function affects cursor movement and text scrolling in
some applications. This is a software specific function. Refer to the
appropriate software manuals for a description of the <Scroll> key.
Drive light:
Light is on when the hard drive or floppy drive is being
accessed. Do not turn your computer off when this light is on. When
the light is amber, the floppy drive is being accessed. When the light
is green, the hard drive is being accessed. For a CD-ROM or DVDROM drive, check the light on the drive itself to see if the drive is
being accessed.
Reading the Sy s tem St atus Lig hts 19
Connecting Peripheral Devices
The connectors on your computer enable you to attach peripheral devices to the
computer (Figure 12).
Turn off your computer before you connect a peripheral
device. Connecting a peripheral device with your computer
turned on may seriously damage the device or your
computer.
TV-Out
PC Card
compartment
Headphone jack
External-mic jack
Line-in jack
PS/2™ mouse
& keyboard port
LAN port
Figure 12. Peripheral Connectors
Table 4 shows the icons located near each connector and tells you the devices that
you can attach to the connectors.
20 Conn ecting P eriphe r a l De vices
Parallel port
Docking
connector
Video port
Serial port
USB port
Table 4. Co nnecting Perip h eral Devices
Icon Connector
PS/2 (IBM Personal Syst em/2) mouse and keyboard port:
Connect
a PS/2-compatible mouse or external keyboard or keypad to this
port. Make sure your computer is turned off when you attach
peripherals to the port.
You can use the computer’s touchpad and a PS/2 keyboard at the
same time, see PS/2 Mouse Configuration in the Advanced section
on 67 for more information.
LAN port:
Parall e l port :
Connect a LAN cable to connect to internet.
Plug a parallel device, such as a parallel printer this
25-pin port.
Docking conne ctor:
Video port:
Plug the interface cable of an external monitor into this
Connect the computer to its docking station.
15-pin connector and then plug the monitor power cord into a
grounded outlet.
Serial port :
Plug a serial device, such as a serial mouse, into this 9pin port. If the device has a 25-pin connector, you need a 25-to-9pin serial adapter.
USB (universal s er i al b us) port:
Connect USB devices to this port.
USB devices include keyboards, pointing devices, and monitors.
Modem jack:
Connect a telephone line to connect to the internet or
send/receive faxes, see the modem user’s manual for more
information
Connecting Peripheral Devices 21
Headphone jack :
jack. Speakers connected to this jack override the internal
speakers.
Connect stereo headphones or speakers to this
Microphone jack :
microphone connected to this jack overrides the internal
microphone.
Line-in jack:
TV-out port:
end of the cable into an external TV. No audio is transmitted via
this port.
Connect an external microphone to this jack.A
An input for external audio.
plug a phono to scart cable into this port and the other
If your computer’s operating system is Windows 98, Windows Me or Windows
2000, you can enable and use the USB port. The Windows NT 4.0 operating
system does not support USB.
22 Conn ecting P eriphe r a l De vices
Using the Flex-Bay
Your computer includes the Flex-Bay, a peripheral bay that can hold one of the
following devices:
CD-ROM drive: shippped with some computers and also available as an
•
option.
DVD-ROM: shippped with some computers and also available as an option.
•
Optional secondary hard drive: available as an option for your computer.
•
Superdisk LS-120: available as an option for your computer.
•
If your operat ing sys te m is W in do w s 98/ Me, you can use the
SwapBay Utility to hot-sw ap the devices. If you do not use
Windows 98/ Me , ma ke sur e that the comput er’ s power is off
before you remove o r install any devices.
To remove a device from the Flex-Bay
1. Turn the computer’s power off.
2. Close the LCD panel, and turn the computer over so that the bottom of the unit
faces up.
3. Pull up on the Flex-Bay latch and pull the device from the bay.(Figure 13)
Flex-Bay latch
Figure 13. Removing a Device from the Flex-Bay
4. Remove the device out of the bay.
Using the Flex-Bay 23
To install a device in the Flex-Bay:
1. Turn the computer’s power off.
2. Place the device into the bay.
3. Push the device in until it is flush with the chassis.
4. Push down on the Flex-Bay latch until the latch snaps into place.
Your computer’s operating system automatically recognizes the device in the
Flex-Bay and configures your computer accordingly.
Using the SwapBay Utility
If your computer shipped with Windows Me, you can use the SwapBay utility to
hot-swap your devices in the flex-bay.
To start the SwapBay utility:
1. Click the Start button on the Windows taskbar.
2. Select SwapBay Utility.
To remove a device:
1. Open the SwapBay Utility.
2. Click Device Remove.
3. Click OK on the confirmation screen.
4. Remove the device by either disconnecting the cable from the computer or
from the device.
5. Click Ok.
To insert a device:
1. Open the SwapBay Utility.
2. Click Device Install.
3. Connect the device to the computer using the device cable. Make sure all
connectors are correctly attached.
4. Click Ok to allow your computer to detect the device.
24 Using the Flex-Bay
If you have difficulty in getting a device detected, go through the Remove
procedure and Insert procedure again.
Using the Flex-Bay 25
Using the Floppy Drive
Your computer comes with a 1.44 MB, 3.5-inch, high-density floppy drive, which
can read, write to, and format the following disks:
A high-density, 3.5-inch disk, which stores 1.44 MB (megabytes) of data.
•
A double-density, 3.5-inch disk, which stores 720 KB (kilobytes) of data.
•
The floppy drive in your notebo ok computer is smaller, but
more p ower -eff icient, t h an a flopp y drive in a desktop
computer. To get the best performance from your floppy drive
use high-quali ty flop p y disks.
To use a floppy disk in All-In-One type computer, insert it into the floppy drive
(Figure 14).
Floppy eject
button
Figure 14. Inserting a Floppy Disk
To remove a floppy disk, press the eject button on the floppy drive.
The floppy drive light on the computer is on when the computer writes to or reads
from a floppy disk. Do not remove a disk when this light is on.
To protect the data on your floppy disks, follow these guidelines:
Keep disks away from excessive heat, direct sunlight, and liquids.
•
Keep magnets and any device that contains a magnet (like the telephone)
•
away from your disks.
26 Using the Floppy Drive
Magnetic fields can destroy the information on a disk.
Do not write directly on a label on your disk; instead, write on a disk label first
•
and attach the label to the disk.
Make copies of all your important disks.
•
Using the Floppy Drive 27
Using the CD-ROM Drive
Compact discs are designed so that you can easily insert one into the computer
when you need it, and then remove it.
1. Press the button on the CD-ROM drive, and the tray slides out. (Do not lean on
the tray; it does not support much weight.)
If the tray fails to slide out it may be stuck, in which case
straighten out a paper clip, insert it into the small hole in the
front of the CD-ROM and push it until the tray ejects.
2. Insert a CD (compact disc), label side up (or remove a disc, if you have finished
using it).
3. Push the tray in gently to close the drive tray (Figure 15).
A light on the drive tray is on when the computer is reading from a CD. Do not
remove a disc when this light is on.
Figure 15. Using the CD-ROM Drive
Install and start a CD-based program as you would run a program on a floppy disk.
See your operating system documentation for more information on running
programs.
The name of the CD-ROM drive is the letter following the letter assigned to your
last hard drive. For instance, if you have one hard drive with two hard drive
partitions, the hard drive is drives C: and D: and the CD-ROM drive is drive E.
28 Using the CD-ROM Drive
Emergency eject
button
Eject Button
CD-ROM Light
If necessary, you can use the emergency eject button to open the CD-ROM drive.
To use the emergency eject button, turn the computer’s power off and insert a
small object, like an straightened paperclip, into the hole to press the button.
Do not place reflective objects in the di sc sl ot because of
possible hazardo us laser emi ss ions.
The laser beam used in this CD -ROM drive is harmful to the
eyes. Do not attempt to disassemble the CD-ROM drive. Refer
servicing to your authorised service center.
The on-board audio hardware and software of your computer enable the computer
to play audio compact discs. If you wish to do so, you can attach external speakers
to the Headphone jack.
To play an audio compact disc:
1. Insert a compact disc into your CD-ROM drive:
a. Press the button on the CD-ROM drive, and its tray slides out.
b. Insert a CD, label side up.
c. Push the tray in to close the drive tray. The Windows Media Player
button appears on the taskbar.
The disc begins to play.
A light on the drive tray is on when the computer plays a CD. Do not remove
a disc when this light is on.
2. To adjust the sound, press the following key combinations: <Fn+F9> decreases
volume, <Fn+F10> increases volume.
To remove the CD:
1. Click the Windows Media Player button on the Windows taskbar to open the
Windows Media Player window.
2. Click the Stop button in the Windows Media Player window.
3. Click the Eject button on the Windows Media Player window or press the
button on your CD-ROM drive. The drive tray opens and you can remove the
disc from the CD-ROM drive.
4. For more information on playing compact discs, see the Help menu in the
Windows Media Player window.
Using the CD-ROM Drive 29
Using the DVD-ROM Drive
See ”Using the Flex-Bay” on page 23 for information on installing the DVD-ROM
drive into the computer.
The DVD-ROM drive operates the same as the CD-ROM drive.
The DVD-ROM drive and the DVD Player are supported by
Windows 98/ 2000/ Me.
Your DVD-ROM drive will play DVD-ROM and CD-ROM discs.
Installing the DVD Player MPEG-2 Software
The DVD software CD containing the DVD Player MPEG-2 software is optional
with DVD-ROM drives.
1. Start Windows and insert the CD Labelled DVD Player into the DVD ROM
Drive.
2. The Installation application will start automatically, so follow the on-screen
instructions to complete the installation.
3. Reboot the system.
4. Make sure that DMA access is enabled for the DVD Drive:
a. From "Control Panel" open the "System" icon.
b. Select the "Device Manager" tab.
c. Click the "Plus sign" beside the CD-ROM entry and select the DVD-
ROM drive.
d. Click the "Properties" button and select the "Settings" tab.
e. Check the "DMA" check box.
f. Click "OK" and restart the system.
For more information on playing MPEG-2 movies and discs, see the Help menu in
the DVD Player window.
30 Using the DVD-ROM Drive
Loading...