This guide provides information concerning installation, basic operation and
troubleshooting on Windows.
ADVANCED
This guide provides information about installation, advanced configuration, operation and
troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
1.Introduction
3.Maintenance
Key benefits 5
Features by model 7
Useful to know 13
About this user’s guide 14
Safety information 15
Machine overview 21
Control panel overview 24
Turning on the machine 28
Installing the driver locally 29
Reinstalling the driver 31
2.Menu Overview and Basic Setup
Menu overview 33
Ordering supplies and accessories 71
Available supplies 72
Available maintenance parts 73
Storing the toner cartridge 74
Redistributing toner 76
Replacing the toner cartridge 79
Replacing the imaging unit 82
Monitoring the supplies life 84
Setting the toner low alert 85
Cleaning the machine 86
Tips for moving & storing your machine 93
4.Troubleshooting
Machine’s basic settings 37
Media and tray 39
Basic printing 54
Basic copying 60
Basic scanning 65
Basic faxing 66
Tips for avoiding paper jams 95
Clearing original document jams 96
Clearing paper jams 99
Understanding the status LED 107
Understanding display messages 110
2
5.Appendix
Specifications 116
Regulatory information 126
Copyright 139
3
1.Introduction
This chapter provides information you need to know before using the machine.
•Key benefits5
•Features by model7
•Useful to know13
•About this user’s guide14
•Safety information15
•Machine overview21
•Control panel overview24
•Turning on the machine28
•Installing the driver locally29
•Reinstalling the driver31
Key benefits
Environmentally friendly
•To save toner and paper, this machine supports Eco feature.
•To save paper, you can print multiple pages on one single sheet of paper
(see "Using advanced print features" on page 232).
•To save paper, you can print on both sides of the paper (double-sided
printing) (see "Using advanced print features" on page 232).
•To save electricity, this machine automatically conserves electricity by
substantially reducing power consumption when not in use.
•We recommend using recycled paper for saving energy.
Fast high resolution printing
•You can print with a resolution of up to 4,800 x 600 dpi effective (600 x 600
x 3 bit) output.
•Fast, on-demand printing.
M267x series:
-For single-side printing, up to 26 ppm (A4) or up to 27 ppm (Letter).
M287x/M288x series:
-For single-side printing, up to 28 ppm (A4) or up to 29 ppm (Letter).
Convenience
•Simply touch your mobile device on the NFC tag on your printer and get the
print job done (see "Using the NFC feature" on page 197).
•You can print on the go from your smartphone or computer using Google
Cloud Print™ enabled apps (see "Google Cloud Print™" on page 205).
•Easy Capture Manager allows you to easily edit and print whatever you
captured using the Print Screen key on the keyboard (see "Easy Capture
Manager" on page 263).
Key benefits
•Samsung Easy Printer Manager and Printing Status is a program that
monitors and informs you of the machine’s status and allows you to
customize the machine’s settings (see "Using Samsung Printer Status" on
page 273or "Using Samsung Easy Printer Manager" on page 270).
•Samsung Easy Document Creator is an application to help users scan,
compile, and save documents in multiple formats, including .epub format.
These documents can be shared via social networking sites or fax (see
"Using Samsung Easy Document Creator" on page 269).
•AnyWeb Print helps you screen-capture, preview, scrap, and print the
screen of Windows Internet Explorer more easily than when you use the
ordinary program (see "Samsung AnyWeb Print" on page 264).
•Smart Update allows you to check for the latest software and install the
latest version during the printer driver installation process. This is available
only for Windows.
•If you have Internet access, you can get help, support application, machine
drivers, manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or Downloads.
Wide range of functionality and application support
•Supports various paper sizes (see "Print media specifications" on page 118).
•Print watermark: You can customize your documents with words, such as
“Confidential” (see "Using advanced print features" on page 232).
•Print posters: The text and pictures of each page of your document are
magnified and printed across the multiple sheets of paper and can then be
taped together to form a poster (see "Using advanced print features" on
page 232).
•You can print in various operating systems (see "System requirements" on
page 121).
•Your machine is equipped with a USB interface and/or a network interface.
Supports various wireless network setting method
•Using the WPS (Wi-Fi Protected Setup™) button
-You can easily connect to a wireless network using the WPS button on
the machine and the access point (a wireless router).
•Using the USB cable or a network cable
-You can connect and set various wireless network settings using a USB
cable or a network cable.
•Using the Wi-Fi Direct
-You can conveniently print from your mobile device using the Wi-Fi or
Wi-Fi Direct feature.
See "Introducing wireless set up methods" on page 166.
Features by model
Some features and optional goods may not be available depending on model or country.
Operating System
(●: Included, Blank: Not available)
Software
You can install the printer driver and software when you insert the software CD into your CD-ROM drive.
For Windows, select the printer driver and software in the Select Software to Install window.
Operating SystemM267x series
M287x seriesM288x series
Windows●●
Mac●●
Linux●●
Unix●
Software
M267x series
M287x seriesM288x series
SPL printer driver
a
●●
PCL printer driver●
PS printer driver
a
Features by model
XPS printer driver
b
●●
Direct Printing Utility
b
Samsung Easy Printer
Manager
Scan to PC settings●●
Fax to PC settings●
(M267xF/M267xFN/M267xFH/M267xHN only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
Device settings●●
Samsung Printer Status●●
Samsung AnyWeb Print
b
●●
Samsung Easy Document Creator●●
Easy Capture Manager●●
SyncThru™ Web Service●
(M267xN/M267xFN/M267xHN only)
●
SyncThru Admin Web Service●
(M267xN/M267xFN/M267xHN only)
●
Easy Eco Driver●●
Easy Capture Manager●●
Software
M267x series
M287x seriesM288x series
Features by model
(●: Included, Blank: Not available)
FaxSamsung Network PC Fax●
(M267xF/M267xFN/ M267xFH/ M267xHN
only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
ScanTwain scan driver●●
WIA scan driver●●
a. Depending on the operating system you use, the installed printer driver may differ.
b. Download the software from the Samsung website and install it: (http://www.samsung.com > find your product > Support or Download). Before installing, check whether your
computer’s OS support the software.
Software
M267x series
M287x seriesM288x series
Features by model
Variety feature
FeaturesM267x series
M287x seriesM288x series
Hi-Speed USB 2.0●●
Network Interface Ethernet 10/100 Base TX
wired LAN
●
(M267xN/M267xFN/M267xHN only)
●
Network Interface 802.11b/g/n wireless LAN
a
●
(M287xDW/M287xFW/M288xFW/M288xHW only)
NFC (Near Field Communication)●
(M288xFW/M288xHW only)
Google Cloud Print™●
(M267xN/M267xFN/M267xHN only)
●
AirPrint●
(M267xN/M267xFN/M267xHN only)
●
Eco printing●●
Duplex (2-sided) printing●
Duplex (2-sided) printing (manual)
bc
●
Document Feeder
Automatic Document
Feeder (ADF)
●●
Features by model
Handset●
(M267xFH/M267x HN only)
●
(M287x HN/M288xHW only)
FaxMulti Send●
(M267xF/M267xFN/M267xFH/ M267xHN only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
Delay Send●
(M267xF/M267xFN/M267xFH/ M267xHN only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
Priority Send●
(M267xF/M267xFN/M267xFH/ M267xHN only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
Forward to Fax●
(M267xF/M267xFN/M267xFH/ M267xHN only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
Secure Receive●
(M267xF/M267xFN/M267xFH/ M267xHN only)
●
(M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only)
ScanScan to PC●●
FeaturesM267x series
M287x seriesM288x series
Features by model
(●: Included, Blank: Not available)
CopyDuplex●
Reduce/Enlarge●●
Collation●●
2-up/ 4-up●●
Adjust background●●
a. Depending on your country, wireless LAN card may not be available. For some countries, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you
bought your machine.
b. Available for Windows OS only.
c. Only tray 1 is supported.
FeaturesM267x series
M287x seriesM288x series
Useful to know
The machine does not print.
•Open the print queue list and remove the document from the
list (see "Canceling a print job" on page 56).
•Remove the driver and install it again (see "Installing the driver
locally" on page 29).
•Select your machine as your default machine in your Windows.
Where can I purchase accessories or supplies?
•Inquire at a Samsung distributor or your retailer.
•Visit www.samsung.com/supplies. Select your country/region
to view product service information.
The status LED flashes or remains constantly on.
A paper jam has occurred.
•Open and close the front door.
•Check the instructions on removing jammed paper in this
manual and troubleshoot accordingly (see "Clearing paper
jams" on page 99).
Printouts are blurry.
•The toner level might be low or uneven. Shake the toner
cartridge.
•Try a different print resolution setting.
•Replace the toner cartridge.
Where can I download the machine’s driver?
•Turn the product off and on again.
•Check the meanings of LED indications in this manual and
troubleshoot accordingly (see "Understanding the status LED"
on page 107).
•Visit www.samsung.com to download the latest machine’s
driver, and install it on your system.
About this user’s guide
This user's guide provides information for your basic understanding of the
machine as well as detailed steps to explain machine usage.
• Do not discard this manual, and keep it for future reference.
•Read the safety information before using the machine.
•If you have a problem using the machine, refer to the troubleshooting
chapter.
•Terms used in this user’s guide are explained in the glossary chapter.
•All illustrations in this user’s guide may differ from your machine depending
on its options or model you purchased.
•The screenshots in this user’s guide may differ from your machine
depending on the machine’s firmware/driver version.
•The procedures in this user’s guide are mainly based on Windows 7.
1
2
General icons
IconTextDescription
Gives users information to protect the machine from
Caution
WarningUsed to alert users to the possibility of personal injury.
Note
possible mechanical damage or malfunction.
Provides additional information or detailed
specification of the machine function and feature.
Conventions
Some terms in this guide are used interchangeably, as below:
•Document is synonymous with original.
•Paper is synonymous with media, or print media.
•Machine refers to printer or MFP.
1. Introduction
14
Safety information
These warnings and precautions are included to prevent injury to you and
others, and to prevent any potential damage to your machine. Be sure to read
and understand all of these instructions before using the machine. After reading
this section, keep it in a safe place for future reference.
3
Important safety symbols
Explanation of all icons and signs used in this chapter
Warning
Caution
Hazards or unsafe practices that may result in severe
personal injury or death.
Hazards or unsafe practices that may result in minor
personal injury or property damage.
4
Operating environment
Warning
Do not use if the power cord is damaged or if the electrical outlet is
not grounded.
This could result in electric shock or fire.
Do not place anything on top of the machine (water, small metal or
heavy objects, candles, lit cigarettes, etc.).
This could result in electric shock or fire.
•If the machine gets overheated, it releases smoke, makes
strange noises, or generates an odd odor, immediately turn off
the power switch and unplug the machine.
Do not attempt.
•The user should be able to access the power outlet in case of
emergencies that might require the user to pull the plug out.
This could result in electric shock or fire.
Do not bend, or place heavy objects on the power cord.
Stepping on or allowing the power cord to be crushed by a heavy
object could result in electric shock or fire.
Do not remove the plug by pulling on the cord; do not handle the
plug with wet hands.
This could result in electric shock or fire.
1. Introduction
15
Safety information
5
Caution
During an electrical storm or for a period of non-operation,
remove the power plug from the electrical outlet.
This could result in electric shock or fire.
Be careful, the paper output area is hot.
Burns could occur.
If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections and
request assistance from qualified service personnel.
Otherwise, this could result in electric shock or fire.
If the machine does not operate properly after these instructions
have been followed, unplug the machine from all interface
connections and request assistance from qualified service
personnel.
Otherwise, this could result in electric shock or fire.
Operating method
Caution
Do not forcefully pull the paper out during printing.
It can cause damage to the machine.
Be careful not to put your hand between the machine and paper
tray.
You may get injured.
Be care when replacing paper or removing jammed paper.
New paper has sharp edges and can cause painful cuts.
When printing large quantities, the bottom part of the paper
output area may get hot. Do not allow children to touch.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
Call an electrician to change the electrical outlet, or this could
result in electric shock.
Do not allow pets to chew on the AC power, telephone or PC
interface cords.
This could result in electric shock or fire and/or injury to your pet.
Burns can occur.
When removing jammed paper, do not use tweezers or sharp metal
objects.
It can damage the machine.
Do not allow too many papers to stack up in the paper output tray.
It can damage the machine.
1. Introduction
16
Safety information
Do not block or push objects into the ventilation opening.
This could result in elevated component temperatures which can
cause damage or fire.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
This machine's power reception device is the power cord.
To switch off the power supply, remove the power cord from the
electrical outlet.
6
Installation / Moving
Warning
Do not place the machine in an area with dust, humidity, or water
leaks.
This could result in electric shock or fire.
Caution
Before moving the machine, turn the power off and disconnect all
cords. The information below are only suggestions based on the
units weight.
If you have a medical condition that prevents you from lifting, do
not lift the machine. Ask for help, and always use the appropriate
amount of people to lift the device safely.
Then lift the machine:
• If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.
• If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift
with 2 people.
• If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or
more people.
The machine could fall, causing injury or machine damage.
Choose a flat surface with enough space for ventilation to place
the machine. Also consider the space required to open the cover
and trays.
The place should be well-ventilated and be far from direct light,
heat, and humidity.
Place the machine in the environment where it meets the
operating temperature and humidity specification.
Otherwise, quality problems can occur and cause damage to the
machine (see "General specifications" on page 116).
When using the machine for a long period of time or printing a
large number of pages in a non-ventilated space, it could pollute
the air and be harmful to your health. Place the machine in a wellventilated space or open a window to circulate the air periodically.
1. Introduction
17
Safety information
Do not place the machine on an unstable surface.
The machine could fall, causing injury or machine damage.
Use only No.26 AWG
Otherwise, it can cause damage to the machine.
Make sure you plug the power cord into a grounded electrical
outlet.
Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters (6
feet) with a 110V machine, then the gauge should be 16 AWG or
larger.
Otherwise, it can cause damage to the machine, and could result
in electric shock or fire.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
If the machine is not well-ventilated, this could result in fire.
Do not overload wall outlets and extension cords.
This can diminish performance, and could result in electric shock
or fire.
The machine should be connected to
the power level which is specified on the label.
If you are unsure and want to check the power level you are using,
contact the electrical utility company.
a
or larger, telephone line cord, if necessary.
a. AWG: American Wire Gauge
7
Maintenance / Checking
Caution
Unplug this product from the wall outlet before cleaning the
inside of the machine. Do not clean the machine with benzene,
paint thinner or alcohol; do not spray water directly into the
machine.
This could result in electric shock or fire.
When you are working inside the machine replacing supplies or
cleaning the inside, do not operate the machine.
You could get injured.
Keep cleaning supplies away from children.
Children could get hurt.
Do not disassemble, repair or rebuild the machine by yourself.
It can damage the machine. Call a certified technician when the
machine needs repairing.
1. Introduction
18
Safety information
8
Supply usage
To clean and operate the machine, strictly follow the user's guide
provided with the machine.
Otherwise, you could damage the machine.
Keep the power cable and the contact surface of the plug clean
from dust or water.
Otherwise, this could result in electric shock or fire.
•Do not remove any covers or guards that are fastened with
screws.
•Fuser units should only be repaired by a certified service
technician. Repair by non-certified technicians could result in
fire or electric shock.
•The machine should only be repaired by a Samsung service
technician.
Do not burn any of the supplies such as toner cartridge or fuser
unit.
This could cause an explosion or uncontrollable fire.
When storing supplies such as toner cartridges, keep them away
from children.
Toner dust can be dangerous if inhaled or ingested.
Using recycled supplies, such as toner, can cause damage to the
machine.
In case of damage due to the use of recycled supplies, a service
fee will be charged.
For supplies that contain toner dust (toner cartridge, waste toner
bottle, imaging unit, etc.) follow the instructions below.
•When disposing of the supplies, follow the instructions for
disposal. Refer to the reseller for disposal instructions.
•Do not wash the supplies.
•For a waste toner bottle, do not reuse it after emptying the
bottle.
Caution
Do not disassemble the toner cartridge.
Toner dust can be dangerous if inhaled or ingested.
If you do not follow the instructions above, it may cause machine
malfunction and environmental pollution. The warranty does not
cover damages caused by a user's carelessness.
When toner gets on your clothing, do not use hot water to wash
it.
Hot water sets toner into fabric. Use cold water.
1. Introduction
19
Safety information
When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.
Toner dust can be dangerous if inhaled or ingested.
1. Introduction
20
Machine overview
9
Components
Power cordQuick installation guide
Software CD
Misc. accessories
a. The software CD contains the print drivers and software applications.
b. Handset model only (see "Variety feature" on page 10)
c. Miscellaneous accessories included with your machine may vary by country of purchase and specific model.
a
c
Handset
Machine
b
1. Introduction
21
Machine overview
10
Front view
6
Paper level indicator
7
Tray
14
Handset
a
15Paper width guide on a document
feeder
•This illustration may differ from your machine depending on your model.
•Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
12
1012
11
3
9
8
7
4
5
6
15
1Document feeder cover 9Output tray
13
14
8
16
NFC tag
Communication)
Manual feeder tray
16
a. Handset model only (see "Variety feature" on page 10).
b. M288x series only.
b
(Near Field
2Document feeder input tray 10Output support
3Document feeder output
support
11Paper width guide on a manual
feeder
4Control Panel12Scanner lid
5Front cover13Scanner glass
1. Introduction
22
Machine overview
11
Rear view
3Extension telephone socket
c
(EXT)
7
USB port
•This illustration may differ from your machine depending on your model.
•Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
4Rear cover
a. M267xN/M267xFN/M267xHN/M267xHN/M287xND/M287xFD/M287xDW/M287xFW/
M287xHN/M288xFW/M288xHW only.
b. May not be available depending on models or your country.
c. M267xF/M267xFN/M267xHN/M267xHN/M287xFD/M287xFW/M287xHN/M288xFW/
M288xHW only.
23
1
7
6
5
1
Network port
2
Telephone line socket (Line)
a
4
5
Power receptacle
b
6
Power switch
b
1. Introduction
23
Control panel overview
2
1
35
6
7
8
911
12
14
13
4
4
10
This control panel may differ from your machine depending on its model.
There are various types of control panels.
12
M267xN/M287xND/M287xDW
4Left/Right ArrowsScrolls through the options available in the selected
menu and increases or decreases values.
5MenuOpens Menu mode and scrolls through the available
menus (see "Accessing the menu" on page 33).
6OKConfirms the selection on the screen.
7Stop/
Stops an operations at any time.
Clear
1ID CopyAllows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID card
copying" on page 64).
2Scan toSwitches between scan and copy mode. The Scan to
LED turns on scan mode and turns off on copy mode.
8Power/
Wake Up
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
9StartStarts a job.
10Power
Goes into power save mode.
Saver
11BackSends you back to the upper menu level.
12Status LEDIndicates the status of your machine (see
"Understanding the status LED" on page 107).
13EcoTurn on Eco mode to reduce toner consumption and
paper usage (see"Eco printing" on page 58).
3Display screenShows the current status and displays prompts during
an operation.
1. Introduction
24
Control panel overview
14DarknessAdjust the brightness level to make a copy for easier
reading, when the original contains faint markings and
dark images.
Configures the wireless network connection easily
WPS
without a computer (see "Wireless network setup" on
page 165).
1DarknessAdjust the brightness level to make a copy for easier
reading, when the original contains faint markings and
dark images.
2ID CopyAllows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID card
copying" on page 64).
3Display screenShows the current status and displays prompts during
an operation.
4CopySwitches to Copy mode.
5FaxSwitches to Fax mode.
1. Introduction
25
Control panel overview
6Left/Right ArrowsScrolls through the options available in the selected
menu and increases or decreases values.
7MenuOpens Menu mode and scrolls through the available
menus.
8OKConfirms the selection on the screen.
9
Numeric keypad
10Address
Book
11Redial/
Pause(-)
12Stop/
Clear
13Power/
Wake Up
Dials a number or enters alphanumeric characters.
Allows you to store frequently used fax numbers or
search for stored fax numbers.
Redials the last number in ready mode, or inserts a
pause(-) into a fax number in edit mode.
Stops an operations at any time.
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
17BackSends you back to the upper menu level.
18ScanSwitches to Scan mode.
19
Status LED
20EcoTurn on Eco mode to reduce toner consumption and
Indicates the status of your machine (see
"Understanding the status LED" on page 107).
paper usage (see"Eco printing" on page 58).
14StartStarts a job.
15Power
Saver
16On Hook
Dial
Goes into power save mode.
When you press this button, you can hear a dial tone.
Then enter a fax number. It is similar to making a call
using speaker phone.
1. Introduction
26
Control panel overview
21
Print Screen
Press this button and the display will Print Screen? on
the display screen. If you want to print only the active
screen, select the Active. If you want to print the whole
screen, select Full.
•Print Screen can only be used in the
Windows and Mac operating systems.
•You can only use this function with USBconnected machine.
•When printing the active window/whole
monitor screen using the print screen
button, the machine may use more toner
depending on what is being printed.
•You can only use this function if the
machine’s Samsung Easy Printer Manager
program is installed. If you are a Mac OS
user, you need to enable Screen Print Settings from the Samsung Easy Printer
Manager to use the Print Screen feature.
Reduce/EnlargeYou can reduce or enlarge the size of a copied image
from 25% to 400% when you copy original documents
from the scanner glass. (see "Reduced or enlarged
copy" on page 63).
Configures the wireless network connection easily
WPS
without a computer (see "Wireless network setup" on
page 165).
1. Introduction
27
Turning on the machine
Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Machine overview" on page 21).
Connect the machine to the electricity supply first.
1
Turn the switch on if the machine has a power switch.
1
2
For M267xN and M287xND/M287xDW, also press the (Power/Wake Up) button to turn the machine on.
1. Introduction
28
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 153).
•If you are a Mac, Linux, or Unix OS user, refer to the "Software Installation"
on page 143.
•The installation window in this User’s Guide may differ depending on the
machine and interface in use.
•Only use a USB cable no longer than 3 meters (118 inches).
14
Windows
Make sure that the machine is connected to your computer and
1
powered on.
Insert the supplied software CD into your CD-ROM drive.
2
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
•For Windows 8,
If the installation window does not appear, from Charms, select
Search > Apps and search for Run. Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD-ROM drive and click OK.
If “Tap to choose what happens with this disc.” pop-up window
appears, click the window and select Run Setup.exe.
Review and accept the installation agreements in the installation
3
window. Then, click Next.
Select USB connection on the Printer Connection Type screen. Then,
4
click Next.
Follow the instructions in the installation window.
5
You can select the software applications in the Select Software to Install
window.
1. Introduction
29
Installing the driver locally
From the Windows 8 Start Screen
•The V4 driver is automatically downloaded from the Windows Update if
your computer is connected to the Internet. If not, you can manually
download the V4 driver from Samsung website, www.samsung.com >
find your product > Support or downloads.
•You can download Samsung Printer Experience app from the Windows
Store. You need have a Microsoft account to use the Windows Store.
1 From Charms, select Search.
2 Click Store.
3 Search and click Samsung Printer Experience.
4 Click Install.
•If you install the driver using the supplied software CD, V4 driver is not
installed. If you want to use the V4 driver in the Desktop screen, you can
download from the Samsung website, www.samsung.com >find your
product > Support or downloads.
•If you want to install Samsung’s printer management tools, you need to
install them using the supplied software CD.
Make sure that your computer is connected to the Internet and powered
1
on.
Make sure that the machine is powered on.
2
Connect the computer and the machine with a USB cable.
3
The driver is automatically installed from the Windows Update.
1. Introduction
30
Loading...
+ 298 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.