Samsung M2870FD User Manual [ru]

M267x series M287x series M288x series

User’s Guide

BASIC

This guide provides information concerning installation, basic operation and troubleshooting on Windows.

ADVANCED

This guide provides information about installation, advanced configuration, operation and troubleshooting on various OS environments.

Some features may not be available depending on models or countries.

1. Introduction

3. Maintenance

Key benefits 5

Features by model 7

Useful to know 13

About this user’s guide 14

Safety information 15

Machine overview 21

Control panel overview 24

Turning on the machine 28

Installing the driver locally 29

Reinstalling the driver 31

2. Menu Overview and Basic Setup

Menu overview 33

Ordering supplies and accessories 71

Available supplies 72

Available maintenance parts 73

Storing the toner cartridge 74

Redistributing toner 76

Replacing the toner cartridge 79

Replacing the imaging unit 82

Monitoring the supplies life 84

Setting the toner low alert 85

Cleaning the machine 86

Tips for moving & storing your machine 93

4. Troubleshooting

Machine’s basic settings 37

Media and tray 39

Basic printing 54

Basic copying 60

Basic scanning 65

Basic faxing 66

Tips for avoiding paper jams 95

Clearing original document jams 96

Clearing paper jams 99

Understanding the status LED 107

Understanding display messages 110

5. Appendix

Specifications 116

Regulatory information 126

1. Introduction

This chapter provides information you need to know before using the machine.

•Key benefits 5

• Features by model 7

• Useful to know 13

• About this user’s guide 14

• Safety information 15

• Machine overview 21

• Control panel overview 24

• Turning on the machine 28

• Installing the driver locally 29

• Reinstalling the driver 31

Key benefits

Environmentally friendly

• To save toner and paper, this machine supports Eco feature.

• To save paper, you can print multiple pages on one single sheet of paper (see "Using advanced print features" on page 232).

• To save paper, you can print on both sides of the paper (double-sided printing) (see "Using advanced print features" on page 232).

• To save electricity, this machine automatically conserves electricity by substantially reducing power consumption when not in use.

• We recommend using recycled paper for saving energy.

Fast high resolution printing

• You can print with a resolution of up to 4,800 x 600 dpi effective (600 x 600 x 3 bit) output.

• Fast, on-demand printing.

M267x series:

- For single-side printing, up to 26 ppm (A4) or up to 27 ppm (Letter). M287x/M288x series:

- For single-side printing, up to 28 ppm (A4) or up to 29 ppm (Letter).

Convenience

• Simply touch your mobile device on the NFC tag on your printer and get the print job done (see "Using the NFC feature" on page 197).

• You can print on the go from your smartphone or computer using Google Cloud Print™ enabled apps (see "Google Cloud Print™" on page 205).

• Easy Capture Manager allows you to easily edit and print whatever you captured using the Print Screen key on the keyboard (see "Easy Capture

Manager" on page 263).

Key benefits

• Samsung Easy Printer Manager and Printing Status is a program that monitors and informs you of the machine’s status and allows you to customize the machine’s settings (see "Using Samsung Printer Status" on page 273or "Using Samsung Easy Printer Manager" on page 270).

• Samsung Easy Document Creator is an application to help users scan, compile, and save documents in multiple formats, including .epub format. These documents can be shared via social networking sites or fax (see "Using Samsung Easy Document Creator" on page 269).

• AnyWeb Print helps you screen-capture, preview, scrap, and print the screen of Windows Internet Explorer more easily than when you use the ordinary program (see "Samsung AnyWeb Print" on page 264).

• Smart Update allows you to check for the latest software and install the latest version during the printer driver installation process. This is available only for Windows.

• If you have Internet access, you can get help, support application, machine drivers, manuals, and order information from the Samsung website, www.samsung.com > find your product > Support or Downloads.

Wide range of functionality and application support

• Supports various paper sizes (see "Print media specifications" on page 118).

• Print watermark: You can customize your documents with words, such as “Confidential” (see "Using advanced print features" on page 232).

• Print posters: The text and pictures of each page of your document are magnified and printed across the multiple sheets of paper and can then be taped together to form a poster (see "Using advanced print features" on page 232).

• You can print in various operating systems (see "System requirements" on page 121).

• Your machine is equipped with a USB interface and/or a network interface.

Supports various wireless network setting method

• Using the WPS (Wi-Fi Protected Setup™) button

- You can easily connect to a wireless network using the WPS button on

the machine and the access point (a wireless router).

• Using the USB cable or a network cable

- You can connect and set various wireless network settings using a USB

cable or a network cable.

• Using the Wi-Fi Direct

- You can conveniently print from your mobile device using the Wi-Fi or

Wi-Fi Direct feature.

See "Introducing wireless set up methods" on page 166.

Features by model

Some features and optional goods may not be available depending on model or country.

Operating System

(●: Included, Blank: Not available)

Software

You can install the printer driver and software when you insert the software CD into your CD-ROM drive.

For Windows, select the printer driver and software in the Select Software to Install window.

Operating System M267x series

M287x series M288x series

Windows ● ●

Mac ● ●

Linux ● ●

Unix ●

Software

M267x series

M287x series M288x series

SPL printer driver

● ●

PCL printer driver ●

PS printer driver

Features by model

XPS printer driver

● ●

Direct Printing Utility

Samsung Easy Printer Manager

Scan to PC settings ● ●

Fax to PC settings ●

(M267xF/M267xFN/M267xFH/M267xHN only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Device settings ● ●

Samsung Printer Status ● ●

Samsung AnyWeb Print

● ●

Samsung Easy Document Creator ● ●

Easy Capture Manager ● ●

SyncThru™ Web Service ●

(M267xN/M267xFN/M267xHN only)

●

SyncThru Admin Web Service ●

(M267xN/M267xFN/M267xHN only)

●

Easy Eco Driver ● ●

Easy Capture Manager ● ●

Software

M267x series

M287x series M288x series

Features by model

(●: Included, Blank: Not available)

Fax Samsung Network PC Fax ●

(M267xF/M267xFN/ M267xFH/ M267xHN

only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Scan Twain scan driver ● ●

WIA scan driver ● ●

a. Depending on the operating system you use, the installed printer driver may differ. b. Download the software from the Samsung website and install it: (http://www.samsung.com > find your product > Support or Download). Before installing, check whether your

computer’s OS support the software.

Software

M267x series

M287x series M288x series

Features by model

Variety feature

Features M267x series

M287x series M288x series

Hi-Speed USB 2.0 ● ●

Network Interface Ethernet 10/100 Base TX wired LAN

●

(M267xN/M267xFN/M267xHN only)

●

Network Interface 802.11b/g/n wireless LAN

●

(M287xDW/M287xFW/M288xFW/M288xHW only)

NFC (Near Field Communication) ●

(M288xFW/M288xHW only)

Google Cloud Print™ ●

(M267xN/M267xFN/M267xHN only)

●

AirPrint ●

(M267xN/M267xFN/M267xHN only)

●

Eco printing ● ●

Duplex (2-sided) printing ●

Duplex (2-sided) printing (manual)

●

Document Feeder

Automatic Document Feeder (ADF)

● ●

Features by model

Handset ●

(M267xFH/M267x HN only)

●

(M287x HN/M288xHW only)

Fax Multi Send ●

(M267xF/M267xFN/M267xFH/ M267xHN only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Delay Send ●

(M267xF/M267xFN/M267xFH/ M267xHN only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Priority Send ●

(M267xF/M267xFN/M267xFH/ M267xHN only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Forward to Fax ●

(M267xF/M267xFN/M267xFH/ M267xHN only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Secure Receive ●

(M267xF/M267xFN/M267xFH/ M267xHN only)

●

(M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only)

Scan Scan to PC ● ●

Features M267x series

M287x series M288x series

Features by model

(●: Included, Blank: Not available)

Copy Duplex ●

Reduce/Enlarge ● ●

Collation ● ●

2-up/ 4-up ● ●

Adjust background ● ●

a. Depending on your country, wireless LAN card may not be available. For some countries, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you

bought your machine. b. Available for Windows OS only. c. Only tray 1 is supported.

Features M267x series

M287x series M288x series

Useful to know

The machine does not print.

• Open the print queue list and remove the document from the list (see "Canceling a print job" on page 56).

• Remove the driver and install it again (see "Installing the driver locally" on page 29).

• Select your machine as your default machine in your Windows.

Where can I purchase accessories or supplies?

• Inquire at a Samsung distributor or your retailer.

• Visit www.samsung.com/supplies. Select your country/region to view product service information.

The status LED flashes or remains constantly on.

A paper jam has occurred.

• Open and close the front door.

• Check the instructions on removing jammed paper in this manual and troubleshoot accordingly (see "Clearing paper jams" on page 99).

Printouts are blurry.

• The toner level might be low or uneven. Shake the toner cartridge.

• Try a different print resolution setting.

• Replace the toner cartridge.

Where can I download the machine’s driver?

• Turn the product off and on again.

• Check the meanings of LED indications in this manual and troubleshoot accordingly (see "Understanding the status LED" on page 107).

• Visit www.samsung.com to download the latest machine’s driver, and install it on your system.

About this user’s guide

This user's guide provides information for your basic understanding of the machine as well as detailed steps to explain machine usage.

• Do not discard this manual, and keep it for future reference.

• Read the safety information before using the machine.

• If you have a problem using the machine, refer to the troubleshooting chapter.

• Terms used in this user’s guide are explained in the glossary chapter.

• All illustrations in this user’s guide may differ from your machine depending on its options or model you purchased.

• The screenshots in this user’s guide may differ from your machine depending on the machine’s firmware/driver version.

• The procedures in this user’s guide are mainly based on Windows 7.

General icons

Icon Text Description

Gives users information to protect the machine from

Caution

Warning Used to alert users to the possibility of personal injury.

Note

possible mechanical damage or malfunction.

Provides additional information or detailed specification of the machine function and feature.

Conventions

Some terms in this guide are used interchangeably, as below:

• Document is synonymous with original.

• Paper is synonymous with media, or print media.

• Machine refers to printer or MFP.

1. Introduction

Safety information

These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. After reading this section, keep it in a safe place for future reference.

Important safety symbols

Explanation of all icons and signs used in this chapter

Warning

Caution

Hazards or unsafe practices that may result in severe personal injury or death.

Hazards or unsafe practices that may result in minor personal injury or property damage.

Operating environment

Warning

Do not use if the power cord is damaged or if the electrical outlet is not grounded.

This could result in electric shock or fire.

Do not place anything on top of the machine (water, small metal or heavy objects, candles, lit cigarettes, etc.).

This could result in electric shock or fire.

• If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine.

Do not attempt.

• The user should be able to access the power outlet in case of emergencies that might require the user to pull the plug out.

This could result in electric shock or fire.

Do not bend, or place heavy objects on the power cord.

Stepping on or allowing the power cord to be crushed by a heavy object could result in electric shock or fire.

Do not remove the plug by pulling on the cord; do not handle the plug with wet hands.

This could result in electric shock or fire.

1. Introduction

Safety information

Caution

During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet.

This could result in electric shock or fire.

Be careful, the paper output area is hot.

Burns could occur.

If the machine has been dropped, or if the cabinet appears damaged, unplug the machine from all interface connections and request assistance from qualified service personnel.

Otherwise, this could result in electric shock or fire.

If the machine does not operate properly after these instructions have been followed, unplug the machine from all interface connections and request assistance from qualified service personnel.

Otherwise, this could result in electric shock or fire.

Operating method

Caution

Do not forcefully pull the paper out during printing.

It can cause damage to the machine.

Be careful not to put your hand between the machine and paper tray.

You may get injured.

Be care when replacing paper or removing jammed paper.

New paper has sharp edges and can cause painful cuts.

When printing large quantities, the bottom part of the paper output area may get hot. Do not allow children to touch.

If the plug does not easily enter the electrical outlet, do not attempt to force it in.

Call an electrician to change the electrical outlet, or this could result in electric shock.

Do not allow pets to chew on the AC power, telephone or PC interface cords.

This could result in electric shock or fire and/or injury to your pet.

Burns can occur.

When removing jammed paper, do not use tweezers or sharp metal objects.

It can damage the machine.

Do not allow too many papers to stack up in the paper output tray.

It can damage the machine.

1. Introduction

Safety information

Do not block or push objects into the ventilation opening.

This could result in elevated component temperatures which can cause damage or fire.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This machine's power reception device is the power cord.

To switch off the power supply, remove the power cord from the electrical outlet.

Installation / Moving

Warning

Do not place the machine in an area with dust, humidity, or water leaks.

This could result in electric shock or fire.

Caution

Before moving the machine, turn the power off and disconnect all cords. The information below are only suggestions based on the units weight.

If you have a medical condition that prevents you from lifting, do not lift the machine. Ask for help, and always use the appropriate amount of people to lift the device safely.

Then lift the machine:

• If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.

• If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift with 2 people.

• If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or more people.

The machine could fall, causing injury or machine damage.

Choose a flat surface with enough space for ventilation to place the machine. Also consider the space required to open the cover and trays.

The place should be well-ventilated and be far from direct light, heat, and humidity.

Place the machine in the environment where it meets the operating temperature and humidity specification.

Otherwise, quality problems can occur and cause damage to the machine (see "General specifications" on page 116).

When using the machine for a long period of time or printing a large number of pages in a non-ventilated space, it could pollute the air and be harmful to your health. Place the machine in a wellventilated space or open a window to circulate the air periodically.

1. Introduction

Safety information

Do not place the machine on an unstable surface.

The machine could fall, causing injury or machine damage.

Use only No.26 AWG

Otherwise, it can cause damage to the machine.

Make sure you plug the power cord into a grounded electrical outlet.

Otherwise, this could result in electric shock or fire.

Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (6 feet) with a 110V machine, then the gauge should be 16 AWG or larger.

Otherwise, it can cause damage to the machine, and could result in electric shock or fire.

Do not put a cover over the machine or place it in an airtight location, such as a closet.

If the machine is not well-ventilated, this could result in fire.

Do not overload wall outlets and extension cords.

This can diminish performance, and could result in electric shock or fire.

The machine should be connected to

the power level which is specified on the label.

If you are unsure and want to check the power level you are using, contact the electrical utility company.

or larger, telephone line cord, if necessary.

a. AWG: American Wire Gauge

Maintenance / Checking

Caution

Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene, paint thinner or alcohol; do not spray water directly into the machine.

This could result in electric shock or fire.

When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine.

You could get injured.

Keep cleaning supplies away from children.

Children could get hurt.

Do not disassemble, repair or rebuild the machine by yourself.

It can damage the machine. Call a certified technician when the machine needs repairing.

1. Introduction

Safety information

Supply usage

To clean and operate the machine, strictly follow the user's guide provided with the machine.

Otherwise, you could damage the machine.

Keep the power cable and the contact surface of the plug clean from dust or water.

Otherwise, this could result in electric shock or fire.

• Do not remove any covers or guards that are fastened with screws.

• Fuser units should only be repaired by a certified service technician. Repair by non-certified technicians could result in fire or electric shock.

• The machine should only be repaired by a Samsung service technician.

Do not burn any of the supplies such as toner cartridge or fuser unit.

This could cause an explosion or uncontrollable fire.

When storing supplies such as toner cartridges, keep them away from children.

Toner dust can be dangerous if inhaled or ingested.

Using recycled supplies, such as toner, can cause damage to the machine.

In case of damage due to the use of recycled supplies, a service fee will be charged.

For supplies that contain toner dust (toner cartridge, waste toner bottle, imaging unit, etc.) follow the instructions below.

• When disposing of the supplies, follow the instructions for disposal. Refer to the reseller for disposal instructions.

• Do not wash the supplies.

• For a waste toner bottle, do not reuse it after emptying the bottle.

Caution

Do not disassemble the toner cartridge.

Toner dust can be dangerous if inhaled or ingested.

If you do not follow the instructions above, it may cause machine malfunction and environmental pollution. The warranty does not cover damages caused by a user's carelessness.

When toner gets on your clothing, do not use hot water to wash it.

Hot water sets toner into fabric. Use cold water.

1. Introduction

Safety information

When changing the toner cartridge or removing jammed paper, be careful not to let toner dust touch your body or clothes.

Toner dust can be dangerous if inhaled or ingested.

1. Introduction

Machine overview

Components

Power cord Quick installation guide

Software CD

Misc. accessories

a. The software CD contains the print drivers and software applications. b. Handset model only (see "Variety feature" on page 10) c. Miscellaneous accessories included with your machine may vary by country of purchase and specific model.

Handset

Machine

1. Introduction

Machine overview

Front view

Paper level indicator

Tray

Handset

15 Paper width guide on a document

feeder

• This illustration may differ from your machine depending on your model.

• Some features and optional goods may not be available depending on model or country (see "Features by model" on page 7).

1 2

10 12

1 Document feeder cover 9 Output tray

NFC tag Communication)

Manual feeder tray

a. Handset model only (see "Variety feature" on page 10). b. M288x series only.

(Near Field

2 Document feeder input tray 10 Output support

3 Document feeder output

support

11 Paper width guide on a manual

feeder

4 Control Panel 12 Scanner lid

5 Front cover 13 Scanner glass

1. Introduction

Machine overview

Rear view

3 Extension telephone socket

(EXT)

USB port

• This illustration may differ from your machine depending on your model.

• Some features and optional goods may not be available depending on model or country (see "Features by model" on page 7).

4 Rear cover

a. M267xN/M267xFN/M267xHN/M267xHN/M287xND/M287xFD/M287xDW/M287xFW/

M287xHN/M288xFW/M288xHW only. b. May not be available depending on models or your country. c. M267xF/M267xFN/M267xHN/M267xHN/M287xFD/M287xFW/M287xHN/M288xFW/

M288xHW only.

2 3

Network port

Telephone line socket (Line)

Power receptacle

Power switch

1. Introduction

Control panel overview

3 5

911

This control panel may differ from your machine depending on its model. There are various types of control panels.

M267xN/M287xND/M287xDW

4 Left/Right Arrows Scrolls through the options available in the selected

menu and increases or decreases values.

5 Menu Opens Menu mode and scrolls through the available

menus (see "Accessing the menu" on page 33).

6 OK Confirms the selection on the screen.

7 Stop/

Stops an operations at any time.

Clear

1 ID Copy Allows you to copy both sides of an ID card like a

driver’s license on a single side of paper (see "ID card copying" on page 64).

2 Scan to Switches between scan and copy mode. The Scan to

LED turns on scan mode and turns off on copy mode.

8 Power/

Wake Up

Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button for more than three seconds.

9 Start Starts a job.

10 Power

Goes into power save mode.

Saver

11 Back Sends you back to the upper menu level.

12 Status LED Indicates the status of your machine (see

"Understanding the status LED" on page 107).

13 Eco Turn on Eco mode to reduce toner consumption and

paper usage (see"Eco printing" on page 58).

3 Display screen Shows the current status and displays prompts during

an operation.

1. Introduction

Control panel overview

14 Darkness Adjust the brightness level to make a copy for easier

reading, when the original contains faint markings and dark images.

Configures the wireless network connection easily

WPS

without a computer (see "Wireless network setup" on page 165).

M267xF/M267xFN/M287xFD/M267xFH/M287xFW/ M267xHN/M287xHN/M288xFW/M288xHW

8 9 10 11

16 14

1 Darkness Adjust the brightness level to make a copy for easier

reading, when the original contains faint markings and dark images.

2 ID Copy Allows you to copy both sides of an ID card like a

driver’s license on a single side of paper (see "ID card copying" on page 64).

3 Display screen Shows the current status and displays prompts during

an operation.

4 Copy Switches to Copy mode.

5 Fax Switches to Fax mode.

1. Introduction

Control panel overview

6 Left/Right Arrows Scrolls through the options available in the selected

menu and increases or decreases values.

7 Menu Opens Menu mode and scrolls through the available

menus.

8 OK Confirms the selection on the screen.

Numeric keypad

10 Address

Book

11 Redial/

Pause(-)

12 Stop/

Clear

13 Power/

Wake Up

Dials a number or enters alphanumeric characters.

Allows you to store frequently used fax numbers or search for stored fax numbers.

Redials the last number in ready mode, or inserts a pause(-) into a fax number in edit mode.

Stops an operations at any time.

Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button for more than three seconds.

17 Back Sends you back to the upper menu level.

18 Scan Switches to Scan mode.

Status LED

20 Eco Turn on Eco mode to reduce toner consumption and

Indicates the status of your machine (see "Understanding the status LED" on page 107).

paper usage (see"Eco printing" on page 58).

14 Start Starts a job.

15 Power

Saver

16 On Hook

Dial

Goes into power save mode.

When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using speaker phone.

1. Introduction

Control panel overview

Print Screen

Press this button and the display will Print Screen? on the display screen. If you want to print only the active screen, select the Active. If you want to print the whole screen, select Full.

• Print Screen can only be used in the

Windows and Mac operating systems.

• You can only use this function with USBconnected machine.

• When printing the active window/whole monitor screen using the print screen button, the machine may use more toner depending on what is being printed.

• You can only use this function if the machine’s Samsung Easy Printer Manager

program is installed. If you are a Mac OS user, you need to enable Screen Print Settings from the Samsung Easy Printer Manager to use the Print Screen feature.

Reduce/Enlarge You can reduce or enlarge the size of a copied image

from 25% to 400% when you copy original documents from the scanner glass. (see "Reduced or enlarged copy" on page 63).

Configures the wireless network connection easily

WPS

without a computer (see "Wireless network setup" on page 165).

1. Introduction

Turning on the machine

Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Machine overview" on page 21).

Connect the machine to the electricity supply first.

Turn the switch on if the machine has a power switch.

For M267xN and M287xND/M287xDW, also press the (Power/Wake Up) button to turn the machine on.

1. Introduction

Installing the driver locally

A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see "Installing driver over the network" on page 153).

• If you are a Mac, Linux, or Unix OS user, refer to the "Software Installation" on page 143.

• The installation window in this User’s Guide may differ depending on the machine and interface in use.

• Only use a USB cable no longer than 3 meters (118 inches).

Windows

Make sure that the machine is connected to your computer and

powered on.

Insert the supplied software CD into your CD-ROM drive.

If the installation window does not appear, click Start > All programs > Accessories > Run.

X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.

• For Windows 8,

If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK.

If “Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.

Review and accept the installation agreements in the installation

window. Then, click Next.

Select USB connection on the Printer Connection Type screen. Then,

click Next.

Follow the instructions in the installation window.

You can select the software applications in the Select Software to Install window.

1. Introduction

Installing the driver locally

From the Windows 8 Start Screen

• The V4 driver is automatically downloaded from the Windows Update if your computer is connected to the Internet. If not, you can manually download the V4 driver from Samsung website, www.samsung.com > find your product > Support or downloads.

• You can download Samsung Printer Experience app from the Windows

Store. You need have a Microsoft account to use the Windows Store.

1 From Charms, select Search. 2 Click Store. 3 Search and click Samsung Printer Experience. 4 Click Install.

• If you install the driver using the supplied software CD, V4 driver is not installed. If you want to use the V4 driver in the Desktop screen, you can download from the Samsung website, www.samsung.com >find your product > Support or downloads.

• If you want to install Samsung’s printer management tools, you need to install them using the supplied software CD.

Make sure that your computer is connected to the Internet and powered

on.

Make sure that the machine is powered on.

Connect the computer and the machine with a USB cable.

The driver is automatically installed from the Windows Update.

1. Introduction

+ 298 hidden pages