SAMSUNG LTN170CT08-001 Specification

Global LCD Panel Exchange Center

www.panelook.com

Approval

TO

DATE

SAMSUNG TFT-LCD

MODEL NO. : LTN170CT08

: Dell / Quanta

: August. 28, 2008

SAMSUNG TFT-LCD

MODEL NO. : LTN170CT08

NOTE :

- Extension code [ 0 ]

- Surface type [ Anti-glare ]

The information described in this SPEC is preliminary and can be changed without prior notice.

APPROVED BY :

PREPARED BY : LCD Product Planning Group I, Marketing Team

SAMSUNG ELECTRONICS CO., LTD.

6DPVXQJ6HFUHW

Doc.No. Rev.No

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04-A00-S-080829

Page

www.panelook.com

/ 26LTN170CT08-0

1

Global LCD Panel Exchange Center

CONTENTS

www.panelook.com

Approval

Revision History

General Description

1. Absolute Maximum Ratings

1.1 Absolute Ratings of environment

1.2 Electrical Absolute Ratings

2. Optical Characteristics

3. Electrical Characteristics

3.1 TFT LCD Module

3.2 Backlight Unit

4. Block Diagram

4.1 TFT LCD Module

4.2 Backlight Unit

5. Input Terminal Pin Assignment

5.1 Input Signal & Power

5.2 LVDS Interface

5.3 Timing Diagrams of LVDS For Transmitting

5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color.

5.5 Pixel format

-------------------( 3 )

-------------------( 4 )

-------------------( 5 )

-------------------( 7 )

-------------------( 10 )

-------------------( 13 )

-------------------( 14 )

6. Interface Timing

6.1 Timing Parameters

6.2 Timing Diagrams of interface Signal

6.3 Power ON/OFF Sequence

7. Outline Dimension

8. Packing

9. Markings & Others

10. General Precaution

6DPVXQJ6HFUHW

-------------------( 19 )

-------------------( 21 )

------------------- ( 22 )

------------------- ( 23 )

-------------------( 25 )

Doc.No. Rev.No

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04-A00-S-080829

Page

www.panelook.com

/ 26LTN170CT08-0

2

Global LCD Panel Exchange Center

www.panelook.com

REVISION HISTORY

REVISION HISTORY

Issued first for LTN170CT07-0 [FR928]AllP00May. 09, 2008

A00 Spec update for LTN170CT08-0AllA00August. 28, 2008

Approval

SummaryPageRevision No.Date

6DPVXQJ6HFUHW

Doc.No. Rev.No

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

04-A00-S-080829

Page

/ 26LTN170CT08-0

3

www.panelook.com

Global LCD Panel Exchange Center

GENERAL DESCRIPTION

DESCRIPTION

LTN170CT08 is a color active matrix TFT (Thin Film Transistor) liquid crystal display
(LCD) that uses amorphous silicon TFT as a switching devices. This model is composed
of a TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 17.0" contains
1,920 x 1200 pixels and can display up to 16,777,216colors. 6 O'clock direction is the
Optimum viewing angle.

FEATURES

• High contrast ratio, high aperture structure

• 1920 x 1200 pixels resolution

• True 8-bit Source IC.

• Low power consumption

• Fast Response

• RGB-LED Back light with LED driver

• DE(Data enable) only mode

• 3.3V LVDS Interface

• Onboard EEDID chip

• Pb-free product

www.panelook.com

Approval

APPLICATIONS

• Notebook PC

• If the usage of this product is not for PC application, but for others, please contact SEC

GENERAL INFORMATION

Display area

Driver element

Display colors

Number of pixel

Pixel arrangement

Pixel pitch

a-Si TFT active matrix

16,777,216

RGB vertical stripe

mm367.20(H) x 229.50(V) ( 17.0” diagonal )

mm0.19125(H) x 0.19125(V) (TYP.)

NoteUnitSpecificationItem

16 : 10pixel1920 x 1200

Display Mode

Surface treatment

6DPVXQJ6HFUHW

Doc.No. Rev.No

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Normally white

Haze 25 , Hard-Coating (4H)

04-A00-S-080829

Page

/ 26LTN170CT08-0

4

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Mechanical Information

Module

size

Note (1) Measurement condition of outline dimension

. Equipment : Vernier Calipers
. Push Force : 500g ⋅f (minimum)

1. ABSOLUTE MAXIMUM RATINGS

1.1 ENVIRONMENTAL ABSOLUTE RATINGS

Operating temperate

(Temperature of glass surface)

Max.

382.7

248.0

6.5

700

Approval

NoteUnitTyp.Min.Item

mm382.2381.7Horizontal (H)

-

mm247.5227.0Vertical (V)

(1)mm--Depth (D)

-g--Weight

NoteUnitMax.Min.SymbolItem

(1),(5)°C60-20 TSTGStorage temperate

(1),(5)°C500TOPR

Note (1) Temperature and relative humidity range are shown in the figure below.

95 % RH Max. (40 °C ≥ Ta)
Maximum wet - bulb temperature at 39

100

-40 -20 0 20 40 60 80

Relative Humidity ( %RH)

90

80

60

40

20

Operating Range

Storage Range

5

0

Temperature (

O

C or less. (Ta > 40 °C ) No condensation

( 40,90 )

( 50,50.4 )

( 60,27.7 )

O

C)

(2),(4)G240-SnopShock ( non-operating )

(3),(4)G2.41-VnopVibration (non-operating)

(2) 2ms, half sine wave, one time for ±X, ±Y, ± Z.
(3) 5 - 500 Hz, random vibration, 30min for X, Y, Z.
(4) At testing Vibration and Shock, the fixture in holding the Module to be tested have to be

hard and rigid enough so that the Module would not be twisted or bent by the fixture.

(5) If product is used for extended time excessively or exposed to high temperatures for extended time,

there is a possibility of wide viewing angle film damage which could affect visual characteristics.

6DPVXQJ6HFUHW

Doc.No. Rev.No

04-A00-S-080829

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Page

/ 26LTN170CT08-0

5

www.panelook.com

Global LCD Panel Exchange Center

1.2 ELECTRICAL ABSOLUTE RATINGS

(1) TFT LCD MODULE

www.panelook.com

V

DD

=3.3V, V

Approval

SS

= GND = 0V

NoteUnitMax.Min.SymbolItem

Power Supply Voltage

Logic Input Voltage

Note (1) Within Ta (25 ± 2 °C)

DD

DD

DD

DD

DD

DD

+ 0.3V

+ 0.3V

– 0.3V

– 0.3V

(1)VV

(1)VV

6DPVXQJ6HFUHW

Doc.No. Rev.No

04-A00-S-080829

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Page

/ 26LTN170CT08-0

6

www.panelook.com

Global LCD Panel Exchange Center

2. OPTICAL CHARACTERISTICS

The following items are measured under stable conditions. The optical characteristics
should be measured in a dark room or equivalent state with the methods shown in Note (5).
Measuring equipment : TOPCON BM-5A and PR-650

www.panelook.com

Approval

Contrast Ratio

(5 Points)

Response Time at Ta

( Rising + Falling )

Average Luminance
of White (5 Points)

Red

Green

Color

Chromaticity

( CIE )

Blue

CR

RT

RT_gray

L,AVE

X

Y

X

Y

X

Y

Normal

Viewing

Angle

φ = 0
θ = 0

* Ta = 25 ± 2 °C, VDD=3.3V, fv= 60Hz, f

Unit

-

msec

168-T

2

cd/m

0.6590.6390.617R

0.3190.2990.279R

0.2080.1880.168G

0.7350.7150.695G

-

0.1640.1440.124B

0.0820.0620.042B

DCLK

(1), (2), (5)--400

(1), (3)2016-T

Gray32

Gray48

(1), (4)-300250Y

(1), (5)

PR-650

= 83 MHz

NoteMaxTyp.Min.ConditionSymbolItem

↔

Viewing

Angle

13 Points

White Variation

6DPVXQJ6HFUHW

White

Hor.

Ver.

Hor.

Ver.

X

Y

L

θ

H

CR ≥ 10

H

L

θ

L

H

H

L

L

CR ≥ 100

0.3330.3130.293W

0.3490.3290.309W

--65

--65θ

Degrees

--55φ

--55φ

--35

--35θ

Degrees

(1), (5)
BM-5A

--35φ

--35φ

-

(6)1.7--δ

Doc.No. Rev.No

04-A00-S-080829

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Page

/ 26LTN170CT08-0

7

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Note 1) Definition of Viewing Angle : Viewing angle range(10

≤≤≤≤

C/R)

Normal Line

θL =90

o

φ = 0

θ

L

φ

o

x

L

φ

,

θ = 0

H

o

θ

R

12 O’clock
direction

y

φH= 90

6 O’clock
direction

φL= 90

o

x'y'

=90

θ

R

Note 2) Definition of Contrast Ratio (CR) : Ratio of gray max (Gmax) ,gray min (Gmin)

at 5 points(4, 5, 7, 9, 10)

CR(4) + CR(5) + CR(7) + CR(9) + CR(10)

CR =

5

Approval

o

o

Points : , , , , at the figure of Note (6).

4 9

5

7

10

Note 3) Definition of Response time :

Display data

White(TFT OFF)

Black(TFT ON)

T

R

White(TFT OFF)

T

F

100%

90%

Optical
Response

10%

0%

Note 4) Definition of Average Luminance of White : measure the luminance of white at 5 points.

(480) ( 960) (1440)

VIEW AREA

L,AVE

Average Luminance of White ( Y

)

10

9

(300)

Time

L4

Y

L,AVE

+ YL5+ YL7+ YL9+ Y

Y

=

5

L10

7

5

4

(lines)

: test point

6DPVXQJ6HFUHW

Doc.No. Rev.No

04-A00-S-080829

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

(600)

(900)

Page

/ 26LTN170CT08-0

8

www.panelook.com

Global LCD Panel Exchange Center

Note 5) After stabilizing and leaving the panel alone at a given temperature for 30 min , the measurement

should be executed. Measurement should be executed in a stable, windless,and dark room.
30 min after lighting the backlight. This should be measured in the center of screen.

Environment condition : Ta = 25 ± 2 °C

Photo-detector

( TOPCON BM-5A

PR-650 )

www.panelook.com

Field

= 2°

Approval

50 cm

TFT-LCD module

[ Optical characteristics measurement setup ]

Note 6) Definition of 13 points white variation (

Maximum luminance of 13 points

δL=

Minimum luminance of 13 points

10%(128 mm)

10%(80 mm)

6DPVXQJ6HFUHW

11

91

192

Center of the screen

δ

L

), CR variation( C

576 960

384 768 1344

22

33

44

73

1152 1536

37

55

66

77

LCD panel

VER

) [ ~ ]

113

19

88

99

1728
(line)

960

(line)

120

240

360

480

600

720

840

1080

: test point

Doc.No. Rev.No

04-A00-S-080829

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Page

/ 26LTN170CT08-0

9

www.panelook.com