SAMSUNG LTM200KP02 Specification

Global LCD Panel Exchange Center

ISSUED DATE : 2010-01-22

www.panelook.com

PRODUCT INFORMATION

SAMSUNG TFT--

SAMSUNG TFT

SAMSUNG TFT-LCD PRODUCT INFORMATION

MODEL : LTM200KP02

Note : This is Product Information is subject to change after 3 months of issuing date.

LCD PRODUCT INFORMATION

Application Engineering Part 1, TCS team

LCD Division, Samsung Electronics Co. , LTD.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

1/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

Contents

General Description --------------------------------------------------------------------------------- (3)

1. Absolute Maximum Ratings ------------------------------------------------------------------- (4)

2. Optical Characteristics -------------------------------------------------------------------------- (6)

3. Electrical Characteristics ------------------------------------------------------------------------(11)

3.1 TFT LCD Module

3.2 Back Light Unit

4. Block Diagram ----------------------------------------------------------------------------------- (15)

4.1 TFT LCD Module

4.2 Back Light Unit

www.panelook.com

PRODUCT INFORMATION

5. Input Terminal Pin Assignment -------------------------------------------------------------- (16)

5.1 Input Signal & Power

5.2 LVDS Interface

5.3 Back Light Unit

5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. Interface Timing --------------------------------------------------------------------------------- (25)

6.1 Timing Parameters (DE only mode)

6.2 Timing Diagrams of interface Signal (DE only mode)

6.3 Power ON/OFF Sequence

6.4 VDD Power Dip Condition

7. Outline Dimension ------------------------------------------------------------------------------- (29)

8. General Precaution ------------------------------------------------------------------------------ (31)

8.1 Handling

8.2 Storage

8.3 Operation

8.4 Operation Condition Guide

8.5 Others

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

2/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

General Description

Description

LTM200KP02 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT (Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 20.0” is 1600 x 900 and this model can display up to 16.7 millions colors.

Features

 High contrast ratio, high aperture structure  PVA(Patterned Vertical Alignment) mode  HD+ (1600 x 900 pixels) resolution  White LED Edge slim Backlight (1-side)  DE (Data Enable) only mode  LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)  RoHS, Halogen Free



TCO 03’ compliance

www.panelook.com

PRODUCT INFORMATION

Applications

 Workstation & desktop monitors  MFM & Graphic application  Display terminals for AV application products  Financial market  Monitors for industrial machine

* If the module is used to other applications besides the above, please contact SEC

in advance.

General Information

Glare(Haze 0%) , Hard coating (3H)Surface Treatment

UnitSpecificationItems

mm0.2767(H) x 0.2767(W)Pixel Pitch

mm442.8(H) x 249.075(V)Active Display Area

colors16.7M (Hi-FRC)Display Colors

pixel1,600 x 900Number of Pixels

Note

RGB vertical stripePixel Arrangement

Normally BlackDisplay Mode

250(Typ.)Luminance of White

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

cd/

༇

3/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

Mechanical Information

www.panelook.com

PRODUCT INFORMATION

Module

Max.

462.85

272.05

mm462.8462.75Horizontal (H)

mm272.00271.95Vertical (V) -

NoteUnitTyp.Min.Item

size

mm11.5-Depth (D)

LCD module onlyg--Weight

Note (1) Mechanical tolerance is

(11.8)

TBD

0.5mm unless there is a special comment.

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.

Power Supply Voltage

Data Signal

Storage temperature

Center of Glass surface temperature

(Operation)

Shock ( non - operating )

Vibration ( non - operating )

Note (1) Ta= 25 ·2 ¶C

sig

STG

OPR

nop

NoteUnitMax.Min.SymbolItem

(1)V6.5GND-0.5V

V5-V

60-25T

500T

୅

(2)

(3)(5)G50-S

(4)(5)G1.5-V

4/33PageLTM200KP02MODEL

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

(2) Temperature and relative humidity range are shown in the figure below.

a. 90 % RH Max. (Ta b. Maximum wet-bulb temperature at 39

c. No condensation (3) 11ms, sine wave, one time for (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis (5) At vibration and shock test, the fixture which holds the module to be tested has to be

hard and rigid enough so that the module would not be twisted or bent by the fixture.

˺39¶

www.panelook.com

C or less. (Ta ˺39¶C)

X, ·Y, ·Z axis

PRODUCT INFORMATION

(39,90)

(50,50.4)

25,5)

((--25,5)

Fig. Temperature and Relative humidity range

(60,27.7)

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

5/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

2. Optical Characteristics

www.panelook.com

PRODUCT INFORMATION

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : SR-3, RD-80S (TOPCON), EZ-Contrast (Eldim)

(Ta = 25 ·2¶C, VDD=5V, fv= 60Hz, fDCLK=67.3MHz, IL =TBDmA(DC) )

NoteUnitMax.Typ.Min.ConditionSymbolItem

Contrast Ratio

(Center of screen)

Response

Time(On/Off)

Luminance of White

(Center of screen)

Color

Chromaticity

(CIE 1931)

Red

Green

Blue

White

Red

-3,0002,500C/R

-25-Tr + TfOn/Off

-0.030

Normal

L,R

U,D

Viewing

Angle

TBD

-250200Y

+0.030

--Ru'

--Rv'

msec

cd/m

(3)

SR-3

(5)

RD-80S

(6)

SR-3

(7),(8)

SR-3

--Gu'

Color

Chromaticity

(CIE 1976)

C.G.L

(ACC ONLY)

* C.G.L : Color Grayscale Linearity

Green

Blue

White

--Gv'

--Bu'

--Bv'

--Wu'

--Wv'

u'v'White

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

(9)0.02--

6/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT INFORMATION

NoteUnitMax.Typ.Min.ConditionSymbolItem

%-(72)--Color Gamut

K-TBD--Color Temperature

Hor.

Viewing

Angle

Ver.

Brightness Uniformity

(9 Points)

uni

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between 30min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen.

LED current : TBDmA (DC) Environment condition : Ta = 25

Field Photo detector

·2 ¶

Photo detector

-8980

-8980 Degrees

-8980

%25--B

(8)

EZ-

Contrast

(4)

SR-3

ദ

TFT - LCD Module

Field

The center of the screen

SR-3 : 40 RD-80S : 50

໅

LCD Panel

໅

7/33PageLTM200KP02MODEL

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (2) Definition of test point

www.panelook.com

PRODUCT INFORMATION

137 683 1229

Active Area

: Test Point

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point

3 2 1

8 79

max

min

Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black

Note (4) Definition of 9 points brightness uniformity

384

691

㽶

of the panel

Buni

=×

Bmax : Maximum brightness Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display Data White(TFT off) Black(TFT on) White(TFT off)

Optical Instruments

Response

100%

90%

10%

(max min)

100

−

max

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT INFORMATION

Note (6) Definition of Luminance of White : Luminance of white at center point

Note (7) Definition of Color Chromaticity (CIE 1931, CIE1976)

Color coordinate of Red, Green, Blue & White at center point

Note (8) Definition of Viewing Angle

: Viewing angle range (CR

10)

㽶

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

9/33PageLTM200KP02MODEL

www.panelook.com

Global LCD Panel Exchange Center

Note (9) Color Grayscale Linearity

a. Test image : 100% full white pattern with a test pattern as below

b. Test pattern : Squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and

105 grays steps should be arranged at the center

www.panelook.com

ྜྷ

of the screen.

PRODUCT INFORMATION

c. Test method

gray step : move a square of 255 gray level should be moved into the center of the

-1 screen and measure luminance and u’ and v’ coordinates.

- Next gray step : Move a 225 gray square into the center and measure both luminance and coordinates, too.

d. Test evaluation

Δu' v'= (u' - u' ) + (v' - v' )

Where A, B : 2 gray levels found to have the largest color differences between them

i.e. get the largest

u’ and ȟv’ of each 6 pair of u’ and v’ and calculate the ȟu’v’.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

10/33PageLTM200KP02MODEL

www.panelook.com

+ 23 hidden pages