9. General Precaution ----------------------------------------------------------------------------------- (21)
9.1 Handling
9.2 Storage
9.3 Operation
9.4 Operation Condition Guide
9.5 Others
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2/24
www.panelook.com
Global LCD Panel Exchange Center
Revision History
DateRev. NoPageSummary
www.panelook.com
Samsung Secret
06.Feb.2012
000allFirst issued
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
General Description
Samsung Secret
Description
LSJ460HJ04 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT( Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit. The resolution of a 46“ is 1920 x 1080 and this model can
display up to 16.7 million colors with wide viewing angle of 89¶ or higher in all directions.
This panel is intended to support applications to provide a excellent performance for Flat
Panel Display such as Home-alone Multimedia TFT-LCD TV and High Definition TV.
Features
High contrast & aperture ratio with wide color gamut
SVA (Super Vertical Align) mode
Wide viewing angle (·178¶)
High speed response
FHD resolution (16:9)
4Ch LVDS (Low Voltage Differential Signaling) interface
General Information
ItemsSpecificationUnitNote
Panel Size
Weight2(Max)kg
Pixel Pitch0.17675(H) X 0.53025(V)mm
Active Display Area1018.08(H) X 572.67(V)mm
Surface TreatmentHaze 2%, Hard-coating (2H)
Display Colors16.7M (8Bits Dithering)colors
Number of Pixels1920 x 1080pixel
Pixel ArrangementRGB vertical stripe
Display ModeNormally Black
1036.08(H) x 591.41(V)
1.76(D)
·1.0mm
mm
Max
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
4/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Samsung Secret
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
ItemSymbolMin.Max.UnitNote
(ڱڮڮ ژٻڋٻڱڄ
Power Supply VoltageV
Storage temperatureT
DD
STG
10.813.2V(1)
540
Glass surface
temperature
CenterT
OPR
050
(Operation)
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 ¶C)
b. Relative Humidity is 90% or less. (Ta > 39 ¶C)
c. No condensation
(2)
(2)
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
5/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment :
ItemSymbolConditionMin.Typ.Max.UnitNote
Contrast Ratio
(Center of screen)
Response
Time
Color
Chromaticity
(CIE 1931)
G-to-GTg-815msec
Red
Green
Blue
D65,RD-80S,EZ-Contrast
C/R
Rx
Ry0.330
Gx0.300
Gy0.600
Bx0.150
By0.060
Normal
TL,R=0
TU,D=0
Viewing
Angle
3,0005,000-
TYP.
-0.03
(Ta = 25 · 2¶C, VDD=12V)
0.640
TYP.
+0.03
Samsung Secret
(1)
k]\
(3)
RD-80S
(5),(6)
k]\
White
sRGB Concordance--98.5-%
Color Temperature--10,000-K
Hor.
Viewing
Angle
Ver.
Transmittance
Uniformity
(9 Points)
Notice
(a) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after operating the Panel at the given temperature for stabilization
of the standard light(SEC use standard illuminant D65 Media).
This should be measured in the center of screen. Environment condition : Ta = 25 · 2 ¶C
Wx0.280
Wy0.290
T
L
T
R
T
U
T
D
T
uni
C/R≥10
7589-
7589-
7589-
7589-
--
10
Degree
%
(5)
k]\
(6)
EZ-
Contrast
(2)
k]\
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
6/24
www.panelook.com
Global LCD Panel Exchange Center
ྙ
ྚྛ
ྞ
ྡ
ྠ
ྜྷྜ
ྟ
www.panelook.com
Samsung Secret
Photo detectorField
SR3
RD-80S
TFT - LCD Module
- Definition of test point
1ദ
2ദ
Photo detector
Field
BM-5A : 50
RD-80S : 50
EZ-Contrast:0༃
LCD Panel
The center of the screen
3209601600
180
540
900
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 䐣 of the panel
: The measurement goes in D65 Standard Light Source
G
CR
/
max
G
min
Active Area
Test Point
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
7/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Note (2) Definition of 9 points Transmittance uniformity (Test pattern : Full White)
The measurement goes in D65 Standard Light Source
Samsung Secret
Tuni
TT
(max min)
T
max
u
100
Tmax : Maximum Transmittance
Tmin : Minimum Transmittance
Note (3) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
100%
Black (data off)
T
R
White (data on)
90%
10%
0%
Black (data off)
T
F
G-to-G : Average response time between Gray to Gray (Scale)
Note (4) Definition of Transmittance : Transmittance at center point 䐣
The measurement goes in D65 Standard Light Source
Note (5) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point 䐣
The measurement goes in D65 Standard Light Source
Note (6) Definition of Viewing Angle
: Viewing angle range (C/R ≥10)
The measurement goes in D65 Standard Light Source
TIME
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Samsung Secret
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Ta = 25¶C · 2 ¶C
ItemSymbolMin.Typ.Max.UnitNote
Voltage of Power SupplyVDD10.812.013.2V(1)
Current
of Power
Supply
(a) Black
IDD
(c) N-pattern-14001800mA
-10001200mA
(2),(3)(b) White-10001200mA
Vsync FrequencyfV95120125Hz
Hsync FrequencyfH120135140kHz
Main FrequencyFdclk260297305MHz
Rush CurrentIRUSH-46A(4)
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) f
V= 120 Hz, fDCLK = 297 MHz, V
= 12.0V, DC Current.
DD
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) uT
(4) Measurement Conditions
V
100%
DD
90%
10%
GND
Rush Current I
T
can be measured when T
RUSH
RUSH
=470༕
. is 470༕.
RUSH
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
18/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Samsung Secret
8. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Cell Label
LSJ460HJ04
Lot number : X X X X XXX
XX X
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
19/24
www.panelook.com
Global LCD Panel Exchange Center
(2) Box Label
www.panelook.com
Samsung Secret
LSJ460HJ04
xxxx
150
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
20/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
9. General Precautions
Samsung Secret
9.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFL back light.
(c) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(e) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(f) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(g) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(h) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
Semiconductor would be damaged
.
(i) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handle a module
(l) Pins of I/F connector should not be touched directly with bare hands.
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
21/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
* Process Control Standard
ItemManagement standard value and performance standard
1Anti-static mat (shelf)1 to 50 [Mohm]
2
3Ionizer
4Anti-static wrist band0.8 to 10 [Mohm]
5
Anti-static mat (floor,
desk)
Anti-static wrist band
entry and ground
resistance
1 to 100 [Mohm]
Attenuate from · 1,000V to · 100V within 2 sec
Below 1,000 [ohm]
Samsung Secret
6Temperature
0 35
7Humidity60 to 70 [%RH]
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
22/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
9.2 Storage
We highly recommend to comply with the criteria in the table below
ITEMUnitMin.Max.
Storage
Temperature
Storage
Humidity
Storage life6 months
- The storage room should provide good ventilation and temperature control.
- Products should not be placed on the floor, but on the Pallet away from
- Prevent products from direct sunlight, moisture nor water; Be cautious of
Storage
Condition
- Avoid other hazardous environment while storing goods.
()540
(%rH)3575
a wall.
a build up of condensation.
Samsung Secret
After 1 month 2 month3 month4month5 month6month
Baking No backing50Ȕ+U50Ȕ+U
9.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
23/24
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
11.4 Operation Condition Guide
Samsung Secret
(a) The LCD product should be operated under normal conditions.
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
11.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
MODELLSJ460HJ04Doc. No07-000- G-20120206Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
24/24
www.panelook.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.