SAMSUNG LSJ400HL02-E Specification

Download

Page 1

Global LCD Panel Exchange Center

www.panelook.com

Product Information

Customer : Visual Display Division DATE : 14. Dec. 2011

Any Modification of Specification is not allowed without SDC's Permission.

Samsung Display Co . , LTD.

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

1/28

www.panelook.com

Page 2

Global LCD Panel Exchange Center

Revision History

Date Rev. No Page Summary

www.panelook.com

14. Dec. 2011

000 all First issued

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

2/28

www.panelook.com

Page 3

Global LCD Panel Exchange Center

www.panelook.com

General Description

Description

LSJ400HL02 is a color active matrix liquid crystal display (LCD) that uses amorphous

silicon TFT( Thin Film Transistor) as switching components. This model is composed of a

TFT LCD panel, a driver circuit. The resolution of a 40“ is 1920 x 1080 and this model can

display up to 16.7 million colors with wide viewing angle of 89¶ or higher in all directions.

This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV and High Definition TV.

Features

 High contrast & aperture ratio with wide color gamut  SPVA (Super Patterned Vertical Align) mode

 Wide viewing angle (·178¶)

 High speed response  FHD resolution (16:9)  2Ch LVDS (Low Voltage Differential Signaling) interface  2D / 3D function compatible

General Information

Items Specification Unit Note

Panel Size

Weight 1.8(Max) kg

Pixel Pitch 0.46125(H) X 0.15375(V) mm

Active Display Area 885.6(H) X 498.15(V) mm

Surface Treatment Haze 0%, Hard-coating (2H)

Display Colors 16.7M (8Bits) colors

Number of Pixels 1920 x 1080 pixel

Pixel Arrangement RGB vertical stripe

Display Mode Normally Black

893.5(H) x 506.05(V)

1.76(D)

·1.0mm

Max

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

3/28

www.panelook.com

Page 4

Global LCD Panel Exchange Center

www.panelook.com

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.

Item Symbol Min. Max. Unit Note

(ڱ

ڮڮ ژٻڋٻڱڄ

Power Supply Voltage V

Storage temperature T

STG

10.8 13.2 V (1)

-20 65

Glass surface

temperature

Center T

OPR

050

(Operation)

Note (1) Ta= 25 · 2 ¶C

(2) Temperature and relative humidity range are shown in the figure below.

a. 90 % RH Max. (Ta ≤ 39 ¶C) b. Relative Humidity is 90% or less. (Ta > 39 ¶C) c. No condensation

୅

(2)

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

4/28

www.panelook.com

Page 5

Global LCD Panel Exchange Center

www.panelook.com

2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent. Measuring equipment :

Item Symbol Condition Min. Typ. Max. Unit Note

TOPCON RD-80S, TOPCON SR-3 ,ELDIM EZ-Contrast

(Ta = 25 · 2¶C, VDD=12V )

Contrast Ratio

(Center of screen)

Response

Time

Transmittance T 4.46 4.8 - %

Color

Chromaticity

(CIE 1931)

sRGB Concordance - - 98.5 - %

Color Temperature - - 10,000 - K

G-to-G Tg - 4 12 msec

Red

Green

Blue

White

C/R

Normal

Ry 0.330

Gx 0.300

Gy 0.600

Bx 0.150

By 0.060

Wx 0.280

Wy 0.290

TL,R=0

TU,D=0

Viewing

Angle

4,000 5,000 -

0.640

TYP.

-0.03

TYP.

+0.03

(1)

SR-3

(3)

RD-80S

(4)

SR-3

(5),(6)

SR-3

(5)

SR-3

Hor.

Viewing

Angle

Ver.

Transmittance

Uniformity (9 Points)

uni

C/R≥10

Notice

(a) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between 40min and 60min after operating the Panel at the given temperature for stabilization of the standard light(SEC use standard illuminant D65 Media). This should be measured in the center of screen. Environment condition : Ta = 25 · 2 ¶C

(b) D65 Media means general available light source.

Color Temperature is 6504K , a color coordinate is Wx 0.2948, Wy 0.322, Luminance is 3389cd/༇

75 89 -

Degree

(6)

EZ-

Contrast

(2)

SR-3

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

5/28

www.panelook.com

Page 6

Global LCD Panel Exchange Center

ྙ

ྚྛ

ྞ

ྡ

ྠ

ྜྷ ྜ

ྟ

www.panelook.com

Photo detector Field

SR3

RD-80S

TFT - LCD Module

- Definition of test point

1ദ

2ദ

Photo detector

Field

BM-5A : 50໅ RD-80S : 50໅ EZ-Contrast:0༃

LCD Panel

The center of the screen

320 960 1600

180

540

900

Note (1) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 䐣 of the panel : The measurement goes in D65 Standard Light Source

max

min

Gmax : Luminance with all pixels white

Gmin : Luminance with all pixels black

Active Area

Test Point

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

6/28

www.panelook.com

Page 7

Global LCD Panel Exchange Center

www.panelook.com

Note (2) Definition of 9 points Transmittance uniformity (Test pattern : Full White)

The measurement goes in D65 Standard Light Source

Tuni

(max min)



max

100

Tmax : Maximum Transmittance Tmin : Minimum Transmittance

Note (3) Definition of Response time : Sum of Tr, Tf

Display data

Optical Instruments

Response

100%

Black (data off)

White (data on)

90%

10%

Black (data off)

୔ G-to-G : Average response time between Gray to Gray (Scale)

Note (4) Definition of Luminance of White : Luminance of white at center point 䐣

The measurement goes in D65 Standard Light Source

Note (5) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point 䐣

The measurement goes in D65 Standard Light Source

Note (6) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)

The measurement goes in D65 Standard Light Source

TIME

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

7/28

www.panelook.com

Page 8

Global LCD Panel Exchange Center

www.panelook.com

3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.

Ta = 25¶C · 2 ¶C

Item Symbol Min. Typ. Max. Unit Note

Voltage of Power Supply VDD 10.8 12.0 13.2 V (1)

Current of Power Supply

(a) Black

IDD

- 1400 1700 mA

(2),(3)(b) White - 1400 1700 mA

Vsync Frequency fV - - - Hz

Hsync Frequency fH - - - kHz

Main Frequency Fdclk - - - MHz

Rush Current IRUSH - - - A (4)

Note (1) The ripple voltage should be controlled under 10% of V

(2) f

V= 240 Hz, fDCLK = 594 MHz, V

= 12.0V, DC Current.

(3) Power dissipation check pattern (LCD Module only)

a) Black Pattern b) White Pattern c) uT

(4) Measurement Conditions

100%

90%

10% GND

=470༕

RUSH

Rush Current I

can be measured when T

RUSH

. is 470༕.

RUSH

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

8/28

www.panelook.com

Page 9

Global LCD Panel Exchange Center

5.1 LVDS Interface

- LVDS Receiver : FRC

www.panelook.com

LVDS pin JEIDA -DATA

TxIN/RxOUT0 R4

TxIN/RxOUT1 R5

TxIN/RxOUT2 R6

TxOUT/RxIN0

TxOUT/RxIN1

TxOUT/RxIN2

TxIN/RxOUT3 R7

TxIN/RxOUT4 R8

TxIN/RxOUT5 R9

TxIN/RxOUT6 G4

TxIN/RxOUT7 G5

TxIN/RxOUT8 G6

TxIN/RxOUT9 G7

TxIN/RxOUT10 G8

TxIN/RxOUT11 G9

TxIN/RxOUT12 B4

TxIN/RxOUT13 B5

TxIN/RxOUT14 B6

TxIN/RxOUT15 B7

TxIN/RxOUT16 B8

TxIN/RxOUT17 B9

TxIN/RxOUT18 HSYNC

TxIN/RxOUT19 VSYNC

TxOUT/RxIN3

TxOUT/RxIN4

TxIN/RxOUT20 DEN TxIN/RxOUT21 R8

TxIN/RxOUT22 R9

TxIN/RxOUT23 G8

TxIN/RxOUT24 G9

TxIN/RxOUT25 B8

TxIN/RxOUT26 B9

TxIN/RxOUT27 RESERVED

TxIN/RxOUT28

TxIN/RxOUT29

TxIN/RxOUT30

TxIN/RxOUT31

TxIN/RxOUT32

TxIN/RxOUT33

TxIN/RxOUT34 RESERVED

yX nW nX iW iX

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

9/28

www.panelook.com

Page 10

Global LCD Panel Exchange Center

www.panelook.com

5.2 Input Signals, Basic Display Colors and Gray Scale of Each Color

COLOR

BASIC

COLOR

GRAY

SCALE

RED

DATA SIGNAL

DISPLAY

(8bit)

R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9

BLACK 000000000000000000000000000000 -

BLUE 000000000000000000001111111111 -

GREEN 000000000011111111110000000000 -

CYAN 000000000011111111111111111111 -

RED 111111111100000000000000000000 -

MAGENTA111111111100000000001111111111 -

YELLOW 111111111111111111110000000000 -

WHITE 111111111111111111111111111111 -

BLACK 000000000000000000000000000000 R0

100000000000000000000000000000 R1

DARK

↑

↓

LIGHT

010000000000000000000000000000 R2

:::::: :::::::::: ::::::::::: :::

:::::: :::::::::: :::::::::: ::::

101111111100000000000000000000R1021

RED GREEN BLUE

GRAY SCALE LEVEL

R3~

R1020

GRAY

SCALE

GREEN

GRAY

SCALE

BLUE

011111111100000000000000000000R1022

RED 111111111100000000000000000000R1023

BLACK 000000000000000000000000000000 G0

000000000010000000000000000000 G1

DARK

↑

↓

LIGHT

GREEN 000000000011111111110000000000G1023

BLACK 000000000000000000000000000000 B0

DARK

↑

↓

LIGHT

000000000001000000000000000000 G2

:::::: :::::::::: :::::::::: ::::

::::::: ::::::::: :::::::::: ::::

000000000010111111110000000000G1021

000000000001111111110000000000G1022

000000000000000000001000000000 B1

000000000000000000000100000000 B2

:::::: :::::::::: :::::::::: ::::

:::::: :::::::::: :::::::::::: ::

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 B1021

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 B1022

G3~

G1020

B3~

B1020

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 B1023

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)

Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

10/28

www.panelook.com

Page 11

Global LCD Panel Exchange Center

www.panelook.com

6.3 Timing diagrams of interface signal ( DE only mode )

TVD

THD

DCLK

DATA

SIGNALS

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

11/28

www.panelook.com

Page 12

Global LCD Panel Exchange Center

www.panelook.com

6.4 Power ON/OFF Sequence

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

0.5ms<T1≤10ms

1ms<T2≤50ms

0ms<T3≤50ms

1000ms≤T4

1000ms≤T5

100ms≤T6

T1 : VDDrising time from 10% to 90% T2 : The time from V

to valid data at power ON.

T3 : The time from valid data off to VDDoff at power Off.

T4 : VDDoff time for Windows restart T5 : The time from valid data to B/L enable at power ON. T6 : The time from valid data off to B/L disable at power Off.

 The supply voltage of the external system for the Module input should be the same

as the definition of VDD.

 Apply the lamp voltage within the LCD operation range. When the back light turns on

before the LCD operation or the LCD turns off before the back light turns off, the display may momentarily show abnormal screen.

 In case of V

= off level,

please keep the level of input signals low or keep a high impedance.

 T4 should be measured after the Module has been fully discharged between power off

and on period.

 Interface signal should not be kept at high impedance when the power is on.

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

12/28

www.panelook.com

Page 13

Global LCD Panel Exchange Center

7. Outline Dimension

www.panelook.com

BM Tolerance Spec.

- Real BM Width spec. : ·0.1mm

- Gap between Active Center and BM

up/down/right/left : ·0.1mm (a,a’)

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

13/28

www.panelook.com

Page 14

Global LCD Panel Exchange Center

www.panelook.com

9. PACKING

9.1 CARTON (Internal Package)

(1) Packing Form Corrugated fiberboard box and corrugated cardboard as shock absorber (2) Packing Method

Packing- Upper Box

Pallet Tray

10EA 10EA

Pallet-Plastic

10EA

9.2 Packing Specification

ITEM Specification Remark

1. 1.90 Kg / LCD (15[ea]/Tray, 300[ea]/Pallet)

LCD Packing 300ea / Box

2. 0.05 Kg / Middle sheet (18[ea]/Tray, 360[ea]/Pallet)

3. 1.40 Kg / Panel tray (20ea/Pallet)

4. 1.00 Kg / Packing Box (1ea)

15EA

Pallet-Wood 1Box / Pallet

Pallet size H x V x height 1,485mm(H) x 1,150mm(V) x 1,192mm(height)

Pallet weight 648.0 kg

1. Pallet weight = 27 kg

2. 27 Kg / Pallet

Pallet(27kg) + Panel tray(28kg) + Panel(570g) + Middle sheet(18Kg) + Packing Box (5kg)

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

14/28

www.panelook.com

Page 15

Global LCD Panel Exchange Center

9.3 Middle Sheet Specification

ITEM Specification

www.panelook.com

Temperature

Measurement Condition

Humidity 20% ~ 60%

Material Polyethylene

Surface Resistance 106~ 10

Static

(No Friction)

Frictional Voltage

Dynamic

(Friction : 5times at once)

9.4 Middle Sheet Outline Dimension

9.9

Less than 200V

Less than 500V

25୅

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

15/28

www.panelook.com

Page 16

Global LCD Panel Exchange Center

www.panelook.com

10. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified location on each product.

(1) Cell Label

LSJ400HL02

Lot number : X X X X XXX

XX X

Cell Position No. (In the Glass) Glass No. (In the one Lot) Lot No. (Glass) Month Year (Note1) Product code Line

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

16/28

www.panelook.com

Page 17

Global LCD Panel Exchange Center

(2) Box Label

www.panelook.com

LSJ400HL02

xxxx

300

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

17/28

www.panelook.com

Page 18

Global LCD Panel Exchange Center

www.panelook.com

11. General Precautions

11.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly

using all mounting holes. Be careful not to twist and bend the Module.

(b) Refrain from strong mechanical shock and / or any force to the Module.

In addition to damage, this may cause improper operation or damage to the Module and CCFL back light.

Do not press or scratch the surface harder than a HB pencil lead.

(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long

time, staining or discoloration may occur.

(e) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(f) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid

or Methyl chloride. It might permanent damage to the polarizer due to chemical

reaction.

(g) If the liquid crystal material leaks from the panel, it should be kept away

from the eyes or mouth . In case of contact with hands, legs or clothes, it must be washed away with soap thoroughly.

(h) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or

Semiconductor would be damaged

(i) Use finger-stalls with soft gloves in order to keep display clean during the

incoming inspection and assembly process.

(k) Protection film for polarizer on the Module should be slowly peeled off just before use

so that the electrostatic charge can be minimized. Must put on antistatic glove while handle a module

(l) Pins of I/F connector should not be touched directly with bare hands.

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

18/28

www.panelook.com

Page 19

Global LCD Panel Exchange Center

www.panelook.com

* Process Control Standard

Item Management standard value and performance standard

1 Anti-static mat (shelf) 1 to 50 [Mohm]

3Ionizer

Anti-static mat (floor,

desk)

1 to 100 [Mohm]

Attenuate from · 1,000V to · 100V within 2 sec

4 Anti-static wrist band 0.8 to 10 [Mohm]

Anti-static wrist band

entry and ground

Below 1,000 [ohm]

resistance

6 Temperature

0 ଩ 35୅

7 Humidity 60 to 70 [%RH]

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

19/28

www.panelook.com

Page 20

Global LCD Panel Exchange Center

www.panelook.com

11.2 Storage

We highly recommend to comply with the criteria in the table below

ITEM Unit Min. Max.

Storage

Temperature

Storage

Humidity

Storage life 6 months

- The storage room should provide good ventilation and temperature control.

- Products should not be placed on the floor, but on the Pallet away from

- Prevent products from direct sunlight, moisture nor water; Be cautious of

Storage

Condition

- Avoid other hazardous environment while storing goods.

(୅)5 40

(%rH) 35 75

a wall.

a build up of condensation.

After 1 month 2 month 3 month 4month 5 month 6month

Baking No backing 50Ȕ+U 50Ȕ+U

11.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

interference should be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should

be connected directly with a minimized length. A longer cable between the back light and the inverter may cause lower luminance of lamp(CCFT) and may require higher startup voltage(Vs).

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

20/28

www.panelook.com

Page 21

Global LCD Panel Exchange Center

www.panelook.com

11.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;

- Temperature : 20·15୅

- Humidity : 55·20%

- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,

humidity, display patterns or operation time etc.., It is strongly recommended to contact SEC for Application engineering advice. Otherwise, its reliability and

function may not be guaranteed. Extreme conditions are commonly found at

Airports, Transit Stations, Banks, Stock market, and Controlling systems.

11.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,

the image may be "sticked" to the screen.

To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled

carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

21/28

www.panelook.com