SAMSUNG LSC550HJ03-S01, LSC550HJ03-801 Specification

CUSTOMER

To Top

MODEL NO.

LSC550HJ03

DATE OF ISSUE

2013/07/17

EXTENSION CODE

-801/-S01

Approved by

2013/07/17

Prepared by

2013/07/17

LCD Sales & Marketing Team

Samsung Display Co., Ltd

Product Specification

( √ ) Preliminary Specification ( ) Approval Specification

Any modification of Spec is not allowed without SDC’s permission

————————————————————————————————————————————————–

For Eyes of To Top Only

Table of Contents

REVISION HISTORY .......................................................................................................................................................... 3

1. GENERAL DESCRIPTION ............................................................................................................................................. 4

2. ABSOLUTE MAXIMUM RATINGS ........................................................................................................................... 5

3. OPTICAL CHARACTERISTICS ..................................................................................................................................... 6

4. ELECTRICAL CHARACTERISTICS ............................................................................................................................... 9

4.1 TFT LCD MODULE ..................................................................................................................................................... 9

5. INPUT TERMINAL PIN ASSIGNMENT .................................................................................................................... 10

5.1 INPUT SIGNAL & POWER ....................................................................................................................................... 10

5.2 LVDS INTERFACE ..................................................................................................................................................... 12

5.3 INPUT COLOR DATA MAPPING............................................................................................................................. 13

6. INTERFACE TIMING ................................................................................................................................................... 14

6.1 TIMING PARAMETERS OF TIMING (ONLY DE MODE) ................................ ................................ ............................ 14

6.2 TIMING DIAGRAMS OF INTERFACE SIGNAL ........................................................................................................ 14

6.3 CHARACTREISTICS OF INPUT DATA OF LVDS ..................................................................................................... 15

6.4 POWER ON/OFF SEQUENCE ................................................................................................................................. 16

6.5 THE SEQUENCE OF 3D ENABLE ............................................................................................................................. 17

7. OUTLINE DIMENSION ............................................................................................................................................... 18

7.1 PANEL OUTLINE ...................................................................................................................................................... 18

7.2 CONTROL BOARD OUTLINE .................................................................................................................................. 19

8. PACKING ...................................................................................................................................................................... 20

8.1 CARTON................................................................................................................................................................... 20

8.2 MARKING ................................................................................................................................................................ 21

9. GENERAL PRECAUTIONS .......................................................................................................................................... 23

9.1 HANDLING ............................................................................................................................................................ 23

9.2 STORAGE ................................................................................................................................................................. 25

9.3 OPERATION ............................................................................................................................................................. 25

9.4 OPERATION CONDITION GUIDE................................................................ ................................ ........................... 26

9.5 PROCESS EXECUTING GUIDE................................................................................................................................. 26

9.6 OTHERS .................................................................................................................................................................... 27

10. SPECIAL PRECAUSTIONS........................................................................................................................................ 28

APPENDIX – RECOMMENDATION FOR THE BLU DESIGN .................................................................................... 29

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 2 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Date.

Rev.No.

Page

Revision Description

2013/7/17

000 Initial Release

For Eyes of To Top Only

REVISION HISTORY

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 3 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Item

Specification

Unit

Note

Active Display Area

1209.60 (H) x 680.40 (V)

mm

Switching Components

a-Si TFT Active matrix

Glass size

TFT : 1227.60 (H) x 700.60 (V) CF : 1222.40 (H) x 697.90 (V)

mm

±0.5mm

Panel Size

1227.60 (H) x 700.60 (V)

mm

±0.5mm

1.80 (D)

mm

±0.1mm

Weight

3,200

g

±10%

Display Colors

1.07B (Dithered 10bit)

Number of Pixels

1,920 x 1,080

16:9

Pixel Arrangement

RGB Vertical Stripe

mm

Display Mode

Normally Black

Surface Treatment

Anti Glare

For Eyes of To Top Only

1. GENERAL DESCRIPTION

DESCRIPTION

This model uses a liquid crystal display (LCD) of amorphous silicon TFT as switching components. This model is composed of a TFT LCD panel, a driver circuit, and an ass’y KIT of source PBA. This 55.0” model has a resolution of a 1920 x 1080 and can display up to 1.07billion colors with the wide viewing angle of 89° or a higher degree in all directions. This panel is designed to support applications by providing a excellent performance function of the flat panel display such as home-alone multimedia TFT-LCD TV and a high definition TV.

FEATURES

RoHS compliance (Pb-free) High contrast ratio & aperture ratio with the wide color gamut SVA(Super Vertical align) mode Wide viewing angle (± 178°) High speed response FHD resolution (16:9) DE (Data enable) mode The interface (2Pixel/clock) of LVDS (Low voltage differential signaling)

GENERAL INFORMATION

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 4 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Item

Symbol

Min.

Max.

Unit

Note

Power supply voltage

VDD

10.8

13.2

V

(1)

Temperature for storage (Temperature of glass surface)

T

STG

-20

65

C

(2), (4)

Humidity for storage

H

STG

5

90

%RH

(2), (4)

Operating temperature

T

OPR

0

50

C

(2), (5) Operating humidity

H

STG

20

90

%RH

Endurance on static electricity

150 V (3)

Fig. Range for temperature and relative humidity (unpacking condition)

For Eyes of To Top Only

2. ABSOLUTE MAXIMUM RATINGS

If the figures on measuring instruments exceed maximum ratings, it can cause the malfunction or the unrecoverable damage on the device.

Note (1) The power supply voltage at Ta= 25 ± 2 °C

(2) Temperature and the range of relative humidity are shown in the figure below. a. 90 % RH Max. (Ta ≤ 39 °C)

b. The relative humidity is 90% or less. (Ta ＞39 °C) c. No condensation

(3) Keep the static electricity under 150V in Polarizer attaching process. (4) Storage condition with glass. (5) Operating condition with assembly. (6) Condition without packing. (Unpacking condition)

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 5 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Item

Symbol

Condition

Min.

Typ.

Max.

Unit

Note

Contrast Ratio

CR

`Normal

qL,R=0

qU,D=0

Viewing

Angle

3000

4000

-

(1)

SR-3

Response time

G-to-G

Tg

- 8 16

msec

(2)

RD-80S

Transmittance

T

5.2

5.7 %

(3)

SR-3

Color

Chromaticity

(CIE)

Red

RX

TYP

-0.03

0.660

TYP

+0.03

(4),(5)

SR-3

RY

0.328

Green

GX

0.266

GY

0.584

Blue

BX

0.134

BY

0.122

White

WX

0.288

WY

0.359

Viewing

Angle

Hor.

q

CR  10

At center

75

89

-

Degrees

(5)

SR-3 EZContrast

q

75

89

-

Ver.

q

75

89

-

q

75

89

-

Color Gamut

65

68 - %

Color

5500

7500

9500 K

For Eyes of To Top Only

3. OPTICAL CHARACTERISTICS

The optical characteristics should be measured in the dark room or the space surrounded by the similar setting. Measuring equipment : TOPCON RD-80S, TOPCON SR-3 ,ELDIM EZ-Contrast

Ta = 25 ± 2°C, VDD=12.0V, fv=60Hz, fDCLK=148.5MHz, Light source: D65 Standard Light

Notice (a) Setup for test equipment The measurement should be executed in a stable, windless, and dark room for 40min and 60min after operating the panel at the given temperature for stabilization of the standard light. (SDC uses the standard luminance of the D65media). This measurement should be measured at the center of screen. The environment condition: Ta = 25 ± 2 °C

(b) D65media has the general light source. The temperature of color is 6487K. The coordinate of color is Wx 0.313, Wy 0.329

The luminance of this product is 7217cd/㎡.

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 6 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Photo detector

Field

SR-3

2°

RD-80S

1°

C R

G G

/

max

min



For Eyes of To Top Only

(c) The CIE positions D65 as the standard daylight illuminant: [D65] is intended to represent average daylight and has a correlated color temperature of approximately 6500 K. CIE standard illuminant D65 should be used in all colorimetric calculations requiring representative daylight, unless there are specific reasons for using a different illuminant.

- Definition of the test point

Note (1) Definition of contrast ratio (C/R) : The ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel

The measurement goes in ELABO-LS Standard light source

Gmax : The luminance with all white pixels Gmin : The luminance with all black pixels

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 7 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Display data

The response of

optical instruments

For Eyes of To Top Only

Note (2) Definition of response time

※ G-to-G : Average response time between the whole gray scale to the whole gray scale.

The response time is the value that was measured after it was operated in Samsung's standard BLU for one hour.( at room temperature)

Note (3) Definition of transmittance The measurement shall be executed with the standard light source of D65.

Note (4) The definition of chromaticity (CIE 1931) The color coordinate of red, green, blue and white at the center point ⑤ The measurement shall be executed with the standard light source of D65

Note (5) Definition of viewing angle : The range of viewing angle (C/R ≥10) The measurement shall be executed with the standard light source of D65

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 8 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Item

Symbol

Min.

Typ.

Max.

Unit

Note

Voltage of power supply

VDD

10.8

12.0

13.2 V (1)

Currnet of

power supply

(a) Black

IDD

-

550

610

mA

(2),(3)

(b) White

-

550

610

mA

(d)Sub V-Stripe

-

960

1060

mA

Vsync frequency

fV

48

60

62.5

Hz Hsync frequency

fH

60

67.5

70

kHz Main frequency

Fdclk

130

148.5

152.5

MHz

Rush current

IRUSH

-

3 A (4)

a) Black pattern b) White pattern c) Sub V-stripe

For Eyes of To Top Only

4. ELECTRICAL CHARACTERISTICS

4.1 TFT LCD MODULE

* Ta = 25 ± 2 °C

Note (1) The ripple voltage should be controlled fewer than 10% of V

(2) fV=60Hz, fDCLK = 148.5MHz, VDD = 12.0V, DC Current. (3) Power dissipation check pattern (LCD Module only)

(Typ.) voltage.

DD

(4) Conditions for measurement

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 9 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Symbol

Description

Symbol

Description

1

NC

NOTE2

26

3D_EN

3D Enable

2

NC

NOTE2

27

NC

NOTE1

3

NC

NOTE2

28

Rx2[A]N

Even LVDS Signal -

4

NC

NOTE1

29

Rx2[A]P

Even LVDS Signal +

5

3D_SYNC_O

3D SYNC OUT Signal

30

Rx2[B]N

Even LVDS Signal -

6

NC

NOTE1

31

Rx2[B]P

Even LVDS Signal +

7

NC

NOTE1

32

Rx2[C]N

Even LVDS Signal -

8

NC

NOTE1

33

Rx2[C]P

Even LVDS Signal +

9

NC

NOTE1

34

GND

Ground

10

NC

NOTE1

35

Rx2CLK-

LVDS Clock -

11

GND

Ground

36

Rx2CLK+

LVDS Clock +

12

Rx1[A]N

Odd LVDS Signal -

37

GND

Ground

13

Rx1[A]P

Odd LVDS Signal +

38

Rx2[D]N

Even LVDS Signal -

14

Rx1[B]N

Odd LVDS Signal -

39

Rx2[D]P

Even LVDS Signal +

15

Rx1[B]P

Odd LVDS Signal +

40

Rx2[E]N (NOTE3)

Even LVDS Signal -

16

Rx1[C]N

Odd LVDS Signal -

41

Rx2[E]P (NOTE3)

Even LVDS Signal +

17

Rx1[C]P

Odd LVDS Signal +

42

NC

NOTE1

18

GND

Ground

43

NC

NOTE1

19

Rx1CLK-

LVDS Clock -

44

GND

Ground

20

Rx1CLK+

LVDS Clock +

45

GND

Ground

21

GND

Ground

46

GND

Ground

22

Rx1[D]N

Odd LVDS Signal -

47

NC

NOTE1

23

Rx1[D]P

Odd LVDS Signal +

48

12V

DC power supply

24

Rx1[E]N (NOTE3)

Odd LVDS Signal -

49

12V

DC power supply

25

Rx1[E]P (NOTE3)

Odd LVDS Signal +

50

12V

DC power supply

51

12V

DC power supply

For Eyes of To Top Only

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 INPUT SIGNAL & POWER

Connector : FI-RE51S-HF (JAE/UJU)

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 10 of 36 Rev.No. 06-000-G-20130717

————————————————————————————————————————————————–

Fig . The diagram of connector

For Eyes of To Top Only

Note (1) No connection: These PINS are used only for the product of SAMSUNG.

(DO NOT CONNECT the input device to these pins.)

Note (2) Pin No. 1, 2, 3 are used only for I2C communication in flicker tuning.

(Refer to 10.5 Process Executing Guide)

Note (3) If set input is 8bit LVDS signal, Keep Echannel level „0‟

Pin No.24 / Pin No.40 : Pull up(3.3V) Pin No.25 / Pin No.41 : Pull down(GND)

Note (4) 3D format is set with Top/Bottom function only.

Note (5) Pin number which starts from the left side.

a. Power GND pins should be connected to the LCD’s metal chassis. b. All power input pins should be connected together. c. All NC pins should be separated from other signal or power.

——————————————————————————————————————————————––—

Doc.No. LSC550HJ03 Page 11 of 36 Rev.No. 06-000-G-20130717