Quick Setup Guide
STOP |
LN1 B 0/LN B 0 |
Please do not return this unit
If you are having problems operating this TV,
Please call;
1-00-SAMSUNG (1-00- -)
For web support please visit www.samsung.com/support
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit www.samsung.com/register.
Rear Panel
1 |
2 |
3 |
4 |
5 |
6 |
7 |
@ |
! |
0 |
9 |
8 |
|
|
|
|
1 EX-LINK |
|
5 HDMI (DVI) IN / |
9 KENSINGTON LOCK |
|||||
2 DIGITAL AUDIO OUT (OPTICAL) |
DVI AUDIO IN [R-AUDIO-L] |
0 AV IN |
|
|||||
6 SERVICE |
|
|||||||
3 PC IN [PC] / [AUDIO] |
! COMPONENT IN |
|
||||||
7 ANT IN |
|
|||||||
4 H(HEADPHONE) |
|
@ AUDIO OUT [R-AUDIO-L] |
||||||
|
8 POWER INPUT |
|||||||
|
|
|
|
|||||
/ |
HDMI/DVI |
Best |
|
|
|
|
OPTICAL (Digital) |
Best |
|
|
|
|
|||||
|
PC/COMPONENT |
|
|
|
|
|
|
|
/ |
Better |
AUDIO (Analog) |
Normal |
|||||
|
VIDEO |
Normal |
|
|
||||
|
|
English-1 |
|
|
Downloaded from www.Manualslib.com manuals search engine
Remote Control
See “Remote Control” in the owner’s instructions for details.
1POWER
Turns the TV on and off.
2NUMERIC BUTTONS
Press to change the channel.
3_
Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press ‘_’ and ‘3’.
4MUTE M
Press to temporarily cut off the sound.
5- VOL +
Press to increase or decrease the volume.
6CH LIST
Used to display Channel Lists on the screen.
7TOOLS
Use to quickly select frequently used functions.
8INFO
Press to display information on the TV screen.
9COLOR BUTTONS
Use these buttons in the Channel list menus etc.
0P.SIZE
Picture size selection.
!TV
Selects the TV mode directly.
@PRE.CH
Tunes to the previous channel.
#z
Press to change channels.
$ SOURCE
Press to display and select the available video sources.
%FAV.CH
Press to switch to your favorite channels.
^MENU
Displays the main on-screen menu.
&RETURN
Returns to the previous menu.
*UP▲ / DOWN▼ / LEFT◄ / RIGHT► / ENTERE
Use to select on-screen menu items and change menu values.
( EXIT
Press to exit the menu.
) CC
Controls the caption decoder.
aMTS
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
English-
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
&
*
(
)
a
Downloaded from www.Manualslib.com manuals search engine
Connections
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
1 HDMI Cable (Not supplied)
1 |
Connect an HDMI Cable between |
the HDMI (DVI) IN jack on the TV |
|
and the HDMI jack on the DVD |
|
|
/ Blu-ray Player or Cable Box / |
|
Satellite receiver (Set-Top Box). |
What is HDMI?
•HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable.
•The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI (DVI) IN jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
|
|
|
1 |
Connect a DVI to HDMI Cable or |
|
|
DVI-HDMI Adapter between the HDMI |
||||
|
|
|
|
(DVI) IN jack on the TV and the DVI |
|
|
|
|
|
||
|
|
|
|
jack on the DVD / Blu-ray player / |
|
|
|
|
|
Cable Box / Satellite receiver (Set-Top |
|
|
|
|
|
Box). |
|
|
|
|
|
||
|
|
|
|
Connect Audio Cables between the |
|
2 |
|||||
DVI AUDIO IN [R-AUDIO-L] jack on |
the TV and the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2 Audio Cable (Not supplied)
1 DVI to HDMI Cable (Not supplied)
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
English-
Downloaded from www.Manualslib.com manuals search engine
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
Connect a Component Cable between 1 the COMPONENT IN [Y, PB, PR] jacks
on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
Connect Audio Cables between the 2 COMPONENT IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
|
|
Component video separates the video into |
|
|
|
Y (Luminance (brightness)), Pb (Blue) and |
|
|
|
Pr (Red) for enhanced video quality. Be sure |
|
|
|
to match the component video and audio |
|
|
|
connections. For example, if connecting a |
|
|
|
Component video cable to COMPONENT IN, |
|
|
|
connect the audio cable to COMPONENT IN |
|
1 |
Component Cable (Not supplied) |
also. |
|
Each DVD / Blu-ray player / Cable Box / |
|||
|
|
||
2 |
Audio Cable (Not supplied) |
Satellite receiver (Set-Top Box) has a different |
|
back panel configuration. |
|||
|
|
When connecting a DVD / Blu-ray player / |
|
|
|
Cable Box / Satellite receiver (Set-Top Box), |
|
|
|
match the color of the connection terminal to |
|
|
|
the cable. |
Connecting a VCR
TV Rear Panel
VCR Rear Panel
1 Video Cable (Not supplied)
2 Audio Cable (Not supplied)
Connect a Video Cable
1 between the AV IN [VIDEO] jack on the TV and the VIDEO OUT jack on the VCR.
Connect Audio Cables between 2 the AV IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT jacks on the VCR.
If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
English-
Downloaded from www.Manualslib.com manuals search engine
Connecting a Digital Audio System
TV Rear Panel
Digital Audio System
Connect an Optical Cable 1 between the DIGITAL AUDIO
OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
1 Optical Cable (Not supplied) |
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theater, not the TV.
Connecting an Amplifier / DVD Home Theater
TV Rear Panel
Amplifier/DVD Home Theater
1 Audio Cable (Not supplied)
Connect Audio Cables between the 1 AUDIO OUT [R-AUDIO-L] jacks on the TV and Audio Input jacks on the
Amplifier / DVD Home Theater.
When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust the volume level with the Amplifier’s volume control.
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
English-
Downloaded from www.Manualslib.com manuals search engine
Connecting a Camcorder
Using a Video Cable
TV Side Panel
Connect a Video Cable between the 1 AV IN [VIDEO] jack on the TV and
the VIDEO OUT jack on the camcorder.
Connect Audio Cables between the 2 AV IN [R-AUDIO-L] jacks on the TV
and the AUDIO OUT jacks on the camcorder.
Camcorder |
2 Audio Cable (Not supplied) |
|
1 Video Cable (Not supplied
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
Using an HDMI Cable
TV Rear Panel
Connect an HDMI Cable between 1 the HDMI (DVI) IN jack on the TV
and the HDMI OUT jack on the camcorder.
HD Camcorder
1 HDMI Cable (Not supplied)
English-
Downloaded from www.Manualslib.com manuals search engine
Connecting a PC
Using a D-Sub Cable
TV Rear Panel
PC
1 |
D-Sub Cable |
(Not supplied) |
2 PC Audio Cable
(Not supplied)
Using an HDMI/DVI Cable
TV Rear Panel
|
HDMI/DVI Cable |
PC |
|
|
|
|
1 (Not supplied) |
|
2 |
3.5 mm Stereo mini-plug/ |
|
2RCA Cable (Not supplied) |
|
Using an HDMI Cable
TV Rear Panel
PC
HDMI Cable 1 (Not supplied)
English-
Using a D-Sub Cable
Connect a D-Sub Cable between 1 PC IN [PC] connector on the TV and the PC output connector on
your computer.
Connect a PC Audio Cable
2 between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
When connecting a PC, match the color of the connection terminal to the cable.
Using an HDMI/DVI Cable
Connect an HDMI/DVI cable
1 between the HDMI (DVI) IN jack on the TV and the PC output jack on your computer.
Connect a 3.5 mm Stereo miniplug 2 / 2RCA Cable between the DVI
AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer.
Using an HDMI Cable
Connect an HDMI cable between 1 the HDMI (DVI) IN jack on the TV
and the PC output jack on your computer.
Each PC has a different back panel configuration.
Downloaded from www.Manualslib.com manuals search engine
Turning the TV On and Off
Press the POWER button on the remote control. You can also use the POWER button on the TV.
Viewing the Menus
|
When selecting the Cable TV system: Press the |
|
4 |
||
ENTEREbutton to start the auto program. |
||
|
Press the ▲,▼, ◄ or ► to select the correct analog |
|
|
||
|
signal cable system source among “STD”, “HRC”, |
|
|
and “IRC”. Press the ▲ or ▼ button to select “Start”, |
|
|
then press the ENTEREbutton. If you have Digital |
|
|
cable TV, select the cable system signal source for |
|
|
both Analog and Digital. |
Auto Program
Selects the cable system.
Analog |
STD |
HRC |
IRC |
Digital |
STD |
HRC |
IRC |
|
|
Start |
|
|
|
UMove EEnter |
mSkip |
With the power on, press the MENU button. 1 The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Support.
Press the ▲ or ▼ button to select one of the icons.
2 Then press the ENTEREbutton to access the icon’s sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
Storing Channels in Memory
(Automatic Method)
|
Press the MENU button to display the menu. |
|
1 |
||
Press the ▲ or ▼ button to select “Channel”, then |
||
|
press the ENTEREbutton. |
|
|
||
|
Press the ▲ or ▼ button to select “Auto Program”, |
|
2 |
||
then press the ENTEREbutton. |
||
|
Press the ▲ or ▼ button to select the antenna |
|
3 |
||
connection, then press the ENTEREbutton. |
Auto Program
Select the Antenna source to memorize.
Air |
Start |
Cable |
Start |
Auto |
Start |
UMove EEnter |
mSkip |
5 |
The TV begins memorizing all available stations. |
|||
Press the EXIT button to exit. |
|
|||
|
|
Auto Program |
|
|
|
Auto Program in Progress. |
|
|
|
|
DTV Cable : 12 |
Cable : 32 |
|
Cable 38 |
|
|
|
|
50% |
|
|
Stop |
|
|
|
|
|
EEnter |
mSkip |
|
|
Auto Program |
|
|
|
Removing scrambled channel. |
|
|
|
|
DTV Cable : 16 |
Cable : 45 |
DTV Cable 41 |
|
|
|
|
|
77% |
|
|
Stop |
|
|
|
|
|
EEnter |
mSkip |
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is being executed. You can also press the ENTEREbutton to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory will be selected (in order).
Selecting the antennas
•Air: “Air” antenna signal.
•Cable: “Cable” antenna signal.
•Auto: “Air” and “Cable” antenna signals.
English-
Downloaded from www.Manualslib.com manuals search engine